Connect to an Android emulator on a Mac from inside a Windows virtual machine

The Android emulator provides versatile networking capabilities that can be used for different purposes, including connecting to an emulator running on a Mac from inside a Windows virtual machine (VM). This is useful when running Windows in Parallels on a Mac. In this scenario it's required to use the emulator on the Mac since it can't run in Parallels. For information about installing the Android emulator on a Mac, see Installation.

Important

The address 127.0.0.1 on your development machine corresponds to the emulator's loopback interface.

There are two main approaches for connecting to an Android emulator on a Mac from inside a Windows VM:

  1. Using nc to perform packet forwarding. For more information, see Use nc to perform packet forwarding.
  2. Using ssh port forwarding. For more information, see Use ssh port forwarding.

In both cases, the Android Debug Bridge (ADB) is used to connect to the emulator. ADB is a command-line tool that's bundled with the Android SDK Platform Tools package, that lets you communicate with a device. The adb command facilitates a variety of device actions, including connecting to devices. For more information about adb, see Android Debug Bridge (adb) on developer.android.com.

Use nc to perform packet forwarding

To connect to the Android Emulator running on a Mac from a Windows VM, by using packet forwarding, use the following steps:

  1. On your Mac, start the Android emulator.

  2. On your Mac, open Terminal.

  3. In Terminal, kill the adb server:

    adb kill-server
    
  4. In Terminal, identify the ports used by the emulator:

    lsof -iTCP -sTCP:LISTEN -P | grep 'emulator\|qemu'
    
    emulator6 94105 macuser   20u  IPv4 0xa8dacfb1d4a1b51f      0t0  TCP localhost:5555 (LISTEN)
    emulator6 94105 macuser   21u  IPv4 0xa8dacfb1d845a51f      0t0  TCP localhost:5554 (LISTEN)
    

    The emulator uses a pair of sequential TCP ports - an even-numbered port for console connections, and an odd-numbered port for adb connections. In the output above the emulator listens for adb on port 5555 and listens for console connections on port 5554.

  5. In Terminal, use nc to forward inbound TCP packets received externally on port 5555 (or any other port) to the odd-numbered port on the loopback interface, and to forward the outbound packets back the other way:

    cd /tmp
    mkfifo backpipe
    nc -kl 5555 0<backpipe | nc 127.0.0.1 5555 > backpipe
    

    In this example, 127.0.0.1 5555 denotes the odd-numbered port on the loopback interface.

    Provided that the nc command keeps running in a Terminal window, packets will be forwarded as expected. Once you've finished using the emulator, you can stop nc performing packet forwarding by pressing CTRL+C in the Terminal window.

  6. In your Windows VM, open Command Prompt.

  7. In Command Prompt, connect to the emulator:

    adb connect ip-address-of-the-mac:5555
    

    Replace ip-address-of-the-mac in this example with the IP address of your Mac, and 5555 with the port you've used from the previous step.

    Note

    Command line access to adb can be obtained in Visual Studio through the Tools > Android > Android Adb Command Prompt... menu item.

When the connection is completed Visual Studio will display the emulator as a debug target under Android Local Devices, which you can use to deploy your app to the emulator.

Use ssh port forwarding

Provided that Remote Login is enabled on your Mac, you can use ssh port forwarding to connect to the emulator.

Important

ssh port forwarding requires you to have installed a SSH client in your Windows VM. One option is to install Git for Windows. The ssh command will then be available in the Git Bash command prompt.

To connect to the Android Emulator running on a Mac from a Windows virtual machine, by using ssh port forwarding, use the following steps:

  1. On your Mac, start the Android emulator.

  2. On your Mac, open Terminal.

  3. In Terminal, kill the adb server:

    adb kill-server
    
  4. In Terminal, identify the ports used by the emulator:

    lsof -iTCP -sTCP:LISTEN -P | grep 'emulator\|qemu'
    
    emulator6 94105 macuser   20u  IPv4 0xa8dacfb1d4a1b51f      0t0  TCP localhost:5555 (LISTEN)
    emulator6 94105 macuser   21u  IPv4 0xa8dacfb1d845a51f      0t0  TCP localhost:5554 (LISTEN)
    

    The emulator uses a pair of sequential TCP ports - an even-numbered port for console connections, and an odd-numbered port for adb connections. In the output above the emulator listens for adb on port 5555 and listens for console connections on port 5554.

  5. In your Windows VM, open Command Prompt.

  6. In Command Prompt, run ssh to setup two-way port forwarding between a local port on Windows and the odd-numbered emulator port on the Mac's loopback interface:

    ssh -L localhost:15555:127.0.0.1:5555 mac-username@ip-address-of-the-mac
    

    In this example, localhost:15555 denotes the local port on Windows and 127.0.0.1 5555 denotes the odd-numbered port on the loopback interface.

    Replace mac-username with your Mac username, which can be obtained with the whoami command, and ip-address-of-the-mac with the IP address of your Mac.

  7. In Command Prompt, connect to the emulator using the local port:

    adb connect localhost:15555
    

    In this example, localhost:15555 denotes the local port on Windows

    Note

    Command line access to adb can be obtained in Visual Studio through the Tools > Android > Android Adb Command Prompt... menu item.

When the connection is completed Visual Studio will display the emulator as a debug target under Android Local Devices, which you can use to deploy your app to the emulator.