Site feedback

Docs-4663 avatar image
26 Votes"
Docs-4663 suggested Docs-4663 commented

Please fix the spam filter so that it does not delay posts (for example: if the member has a User reputation > 250, 500 or 1000) and (for example: if the member is a community expert in 1 or 2 or more tags)

Members of Microsoft Q&A cannot get timely communication when the spam filter delays proper posts.

Please improve the spam filter so that these can modify the message which delays posts:

Your answer was submitted, and will be reviewed by a moderator before being visible to all users.

This post is currently awaiting for a moderator to review.



Prevent the spam filter from interfering with posts from members that have:

a) User reputation > 250, 500, 1000, 2000 or 3000 etc.

b) Community expert in 1, 2, 3 or more tags


There are currently 365 / 306848 members with User reputation > 1000

There are currently 530 / 306848 members with User reputation > 500

There are currently 855 / 306848 members with User reputation > 250




So far it has taken more than one hour for the post to appear in the thread.

In the meantime the opening poster chose an answer which incompletely addresses the underlying computer problems.

Well over two hours without a post that was blocked by the spam filter awaiting moderator approval.

(the website needs a better spam filter and more moderators)




Three hours have passed and still the post did not make it to the thread.

Please improve the spam filter so that it does not delay posts from those that have User reputation scores and Community expert reputations.

And please have performance levels for moderator response times so that members can get help in a timely fashion.




It took approximately 4 hours for the moderator to moderate and post into the thread:

Docs-4663 answered • 4 hours ago | Docs-4663 published • 13 minutes ago EXPERT ANSWERCOMMUNITY EXPERT

qna-feedback
· 3
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

ok nice topc

2 Votes 2 ·

Ok Topc

0 Votes 0 ·

Good TOPICS

0 Votes 0 ·
Docs-4663 avatar image
0 Votes"
Docs-4663 commented

This is another thread that triggered the spam filter:

https://docs.microsoft.com/en-us/answers/answers/734834/view.html

**Your answer was submitted, and will be reviewed by a moderator before being visible to all users.

This post is currently awaiting for a moderator to review.**


Please modify the spam filter so that it is not triggered when members achieve reputation levels and community expert tags.
(see the opening post for examples)

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Docs-4663 avatar image
1 Vote"
Docs-4663 commented Docs-4663 edited

In this thread an edit triggered the spam filter:

https://docs.microsoft.com/en-us/answers/answers/739496/view.html



Please improve the spam filter so that members with certain parameters are not subject to what triggers:


**Your answer was submitted, and will be reviewed by a moderator before being visible to all users.

This post is currently awaiting for a moderator to review.**


For example:

Reputation score > or = 1000

Community expert tags > or = 2


5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Docs-4663 avatar image
1 Vote"
Docs-4663 commented Docs-4663 published

03/10/2022 10:17 PM CT



Today, 03/10/2022 there were two thread posts that were delayed by the Microsoft Q&A spam filter.

Once there is a failure to post the OP has to wait for a moderator.

Those helping also need to wait for a moderator.

This could take many hours.

The filter with its current settings is problematic causing interference with timely posts.



Often diskpart commands for multiple disks and partitions improperly triggers the spam filter and causes unnecessary delays.

Please fix the spam filter so that it does not interfere with diskpart commands for multiple disk drives with multiple partitions.



These are the threads that were problematic today:



https://docs.microsoft.com/en-us/answers/answers/767217/view.html


 Your answer was submitted, and will be reviewed by a moderator before being visible to all users.


 This post is currently awaiting for a moderator to review.





Open administrative command prompt and type or copy and paste:

bcdedit /enum all
diskpart
lis dis
lis vol
sel dis 0
det dis
lis par
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel par 4
det par
sel par 5
det par
sel par 6
det par
sel dis 1
det dis
lis par
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel par 4
det par
sel par 5
det par
sel par 6
det par


Post images or share links of the commands with the results into this thread using one drive, drop box, or google drive.




https://docs.microsoft.com/en-us/answers/answers/767940/view.html


 Your answer was submitted, and will be reviewed by a moderator before being visible to all users.


 This post is currently awaiting for a moderator to review.



3) Open administrative command prompt and type or copy and paste: (all at one time)

bcdedit /enum all
reagentc /info
diskpart
lis dis
lis vol
sel dis 0
det dis
lis par
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel par 4
det par
sel par 5
det par
sel par 6
det par
sel dis 1
det dis
lis par
sel par 1
det par
sel par 2
det par
sel par 3
det par
sel par 4
det par
sel par 5
det par
sel par 6
det par

Post images or share links displaying the commands with results.



5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Docs-4663 avatar image
0 Votes"
Docs-4663 commented

03/10/2022 11:38 PM CT

For this feedback thread more than one hour has passed and the post has not yet made it to the thread.

This is another example of delayed posting cause by the spam filter.

The moderator response time is also slow.

What is the expected moderator reply time?



Docs-4663 suggested • Feb 11 2022 at 10:58 PM | Docs-4663 commented • 1 hour ago

Please fix the spam filter so that it does not delay posts (for example: if the member has a User reputation > 250, 500 or 1000) and (for example: if the member is a community expert in 1 or 2 or more tags)

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Docs-4663 avatar image
0 Votes"
Docs-4663 commented Docs-4663 edited

03/11/2022 1:11 AM CT


The post that was blocked by the spam filter and waited for moderation just made it to the thread.


Docs-4663 commented • 2 hours ago | Docs-4663 published • 4 minutes ago
03/10/2022 10:17 PM CT


It took nearly three hours for the post to make it to the thread.



Docs-4663 commented • 2 hours ago | Docs-4663 published • 6 minutes ago
03/10/2022 10:17 PM CT

10:17 PM > 1:13 AM

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Docs-4663 avatar image
0 Votes"
Docs-4663 commented Docs-4663 edited

In this thread:

https://docs.microsoft.com/en-us/answers/answers/772453/view.html


UlfHolt-1392 asked • 32 minutes ago | Docs-4663 answered • 0 secs ago

Boot problem after installing dual boot



a post was just made and it displayed:


 Your answer was submitted, and will be reviewed by a moderator before being visible to all users.


 This post is currently awaiting for a moderator to review.



Please modify the spam filter so that it is not triggered by members that:

a) have high reputation points > 1000, 2000, 3000, etc.

b) have multiple community expert tags > 2, 3, 4, etc.

c) have accepted answers > 25, 50, 75, etc.







25 minutes have passed and the post still cannot help our member:


 This post is currently awaiting for a moderator to review.


UlfHolt-1392 asked • 57 minutes ago | Docs-4663 answered • 25 minutes ago

Boot problem after installing dual boot






50 minutes have passed and the post still cannot help our member:


 This post is currently awaiting for a moderator to review.



UlfHolt-1392 asked • 1 hour ago | Docs-4663 answered • 50 minutes ago

Boot problem after installing dual boot


5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Docs-4663 avatar image
0 Votes"
Docs-4663 commented

In this link:

https://docs.microsoft.com/en-us/answers/answers/782826/view.html

it displayed:

 Your answer was submitted, and will be reviewed by a moderator before being visible to all users.

 This post is currently awaiting for a moderator to review.


The website malfunctioned.
The post should have been in this thread:
https://docs.microsoft.com/en-us/answers/questions/780999/getting-an-critical-bsod-ntoskrnlexe-from-weeks-ev.html


How come it created a second thread?
https://docs.microsoft.com/en-us/answers/questions/780999/getting-an-critical-bsod-ntoskrnlexe-from-weeks-ev.html
https://docs.microsoft.com/en-us/answers/answers/782826/view.html


Please improve / fix the spam filter so that members can receive my posts without these unnecessary delays.


Options to override the spam filter:

a) if the member has a reputation > A (9000)
b) if the member has answers > B (100)
c) if the member has community expert > C (5?)


5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Docs-4663 avatar image
0 Votes"
Docs-4663 commented

In this link:

https://docs.microsoft.com/en-us/answers/answers/782826/view.html

it displayed:

 Your answer was submitted, and will be reviewed by a moderator before being visible to all users.

 This post is currently awaiting for a moderator to review.


The website malfunctioned.
The post should have been in this thread:
https://docs.microsoft.com/en-us/answers/questions/780999/getting-an-critical-bsod-ntoskrnlexe-from-weeks-ev.html


How come it created a second thread?
https://docs.microsoft.com/en-us/answers/questions/780999/getting-an-critical-bsod-ntoskrnlexe-from-weeks-ev.html
https://docs.microsoft.com/en-us/answers/answers/782826/view.html


Please improve / fix the spam filter so that members can receive my posts without these unnecessary delays.


Options to override the spam filter:

a) if the member has a reputation > A (9000)
b) if the member has answers > B (100)
c) if the member has community expert > C (5?)


5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Docs-4663 avatar image
0 Votes"
Docs-4663 commented Docs-4663 edited

In this link:

https://docs.microsoft.com/en-us/answers/answers/786469/view.html



ekontosWDB asked • 48 minutes ago | Docs-4663 answered • 0 secs ago

Need to Repair Windows 2012 R2 Server VM



it displayed:


 Your answer was submitted, and will be reviewed by a moderator before being visible to all users.

 This post is currently awaiting for a moderator to review.




Please fix the spam filter so that members do not receive delayed replies.

Once a spam trigger occurs it could take many hours for a moderator to evaluate the post.


Please modify the spam filter so members that have these criteria can post without being subject to delayed posts:


a) Reputation points > 250, 500, 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000 etc.

b) Community expert tags > 1, 2, 3, 4, 5, etc.

c) Answers accepted > 25, 50, 75, 100, etc.




As of this post on 03/24/2022:

Reputation points: 9276

Community expert tags > 5 (total unknown as it's not displayed in the profile section)

Answers accepted: 101





Over one hour has passed and the post has still not made it to the thread:

ekontosWDB asked • 1 hour ago | Docs-4663 answered • 1 hour ago
Need to Repair Windows 2012 R2 Server VM

I have an exchange 2013 server running on a windows 2012 r2 server. C: drive says disk structure is corrupted and unreadable. When I ran chkdsk it said it repaired everything. Ran it again and no complaints but it wont boot into windows. Tried repairing the boot record, etc. No luck. Any step by step instructions on how to proceed please?

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Docs-4663 avatar image
0 Votes"
Docs-4663 commented Docs-4663 edited

In this link:

https://docs.microsoft.com/en-us/answers/answers/797763/view.html


CESARRAMIROBELTRN-3112 asked • 23 hours ago | Docs-4663 answered • 0 secs ago

Bug Check 0xC000021A: WINLOGON_FATAL_ERROR in Windows Server 2019


It displayed:


 Your answer was submitted, and will be reviewed by a moderator before being visible to all users.


 This post is currently awaiting for a moderator to review.




Please fix the spam filter so that members do not receive delayed replies.

Once a spam trigger occurs it could take many hours for a moderator to evaluate the post.


Please modify the spam filter so members that have these criteria can post without being subject to delayed posts:


a) Reputation points > 250, 500, 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000, 10000 etc.

b) Community expert tags > 1, 2, 3, 4, 5, etc.

c) Answers accepted > 25, 50, 75, 100, etc.




As of this post on 04/01/2022:

Reputation points: 9486

Community expert tags > 5 (total unknown as it's not displayed in the profile section)

Answers accepted: 103

Start date: 04/04/2021

5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

Your Opinion Counts

Share your feedback, or help out by voting for other people's feedback.