question

BehzadNajafizad-1149 avatar image
0 Votes"
BehzadNajafizad-1149 asked SharonZhao-MSFT commented

Error Publish Topology in skype for business 2015

Dear @SharonZhao-MSFT
I have problem in publish topology... I Remove step by step Skype for business 2015 in my domain and clean any object on domain..... so I decide start new setup SFB 2015 in new server...
In this case when publish topology in Topology Builder failed.
Condition is:
1- I have 2 Active Directory (Primary and Additional)
2- any time use Enable-CSADForest -GroupDomainController for any Active Directory FQDN error in publishing different in part of AD1.domain.local
3- All Prepare Active Directory Steps success
4- Prepare first standard edition server is success
5- install administrative tools success

55124-error-skype-publish-topology.jpg




Error: Active Directory operation failed on "AD1.domain.local". You cannot retry this operation: "A value for the attribute was not in the acceptable range of values 00002082: AtrErr: DSID-03151817, #1: 0: 00002082: DSID-03151817, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 8c38aa7e (msRTCSIP-ServerVersion):len 4 "
▼ Details
└ Type: ADOperationException
└ ▼ Stack Trace
└ at Microsoft.Rtc.Management.ADConnect.Session.ADSession.AnalyzeDirectoryError(ADConnection connection, DirectoryRequest request, DirectoryException de, Int32 totalRetries, Int32 retriesOnServer)
at Microsoft.Rtc.Management.ADConnect.Session.ADSession.ExecuteModificationRequest(ADObjectBase entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)
at Microsoft.Rtc.Management.ADConnect.Session.ADSession.Save(ADObjectBase instanceToSave, IEnumerable`1 properties)
at Microsoft.Rtc.Management.Deployment.Tasks.TopologyPrepareTask.Action()
at Microsoft.Rtc.Management.Internal.Utilities.LogWriter.InvokeAndLog(Action action)


└ ▼ Additional Details
└ Error: A value in the request is invalid.
▼ Details
└ Type: DirectoryOperationException
└ ▼ Stack Trace
└ at System.DirectoryServices.Protocols.LdapConnection.ConstructResponse(Int32 messageId, LdapOperation operation, ResultAll resultType, TimeSpan requestTimeOut, Boolean exceptionOnTimeOut)
at System.DirectoryServices.Protocols.LdapConnection.SendRequest(DirectoryRequest request, TimeSpan requestTimeout)
at Microsoft.Rtc.Management.ADConnect.Connection.ADConnection.SendRequest(DirectoryRequest request, LdapOperation ldapOperation)
at Microsoft.Rtc.Management.ADConnect.Session.ADSession.ExecuteModificationRequest(ADObjectBase entry, DirectoryRequest request, ADObjectId originalId, Boolean emptyObjectSessionOnException)



Error: An error occurred: "Microsoft.Rtc.Management.ADConnect.ADOperationException" "Active Directory operation failed on "AD1.domain.local". You cannot retry this operation: "A value for the attribute was not in the acceptable range of values
00002082: AtrErr: DSID-03151817, #1:
0: 00002082: DSID-03151817, problem 1005 (CONSTRAINT_ATT_TYPE), data 0, Att 8c38aa7e (msRTCSIP-ServerVersion):len 4
""


office-skype-business-server-deployment
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

SharonZhao-MSFT avatar image
0 Votes"
SharonZhao-MSFT answered

@BehzadNajafizad-1149,

What is your AD topology?

I am confused about this. You could read this article and give us a more understandable term.

You could try the following steps to fix this issue:

  1. Go to ADSIEDIT and connect to Schema.

  2. Look for “CN=ms-RTC-SIP-SchemaVersion” and then right click and go to properties.

  3. This will bring up the attribute editor. Clear the values from “rangeLower” and “rangeUpper”

  4. Publish topology


If the response is helpful, please click "Accept Answer" and upvote it.

Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.



5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

BehzadNajafizad-1149 avatar image
0 Votes"
BehzadNajafizad-1149 answered SharonZhao-MSFT commented

@SharonZhao-MSFT Tank you for answer me, my topology is easy....

  1. Standard Edition Config SFB

  2. I have 2 sip domain (Primary SIP is Local Domain and Additional SIP is Public Domain)

  3. Use SQL Server Express in Front End (Standard Edition SFB)

  4. Have 2 Domain Controller (Primary and Additional)
    I have double check for the Schema in two Active Directory and "rangeLower" and "rangeUpper" is correct.
    55404-image-15.jpg



image-15.jpg (439.4 KiB)
· 5
5 |1600 characters needed characters left characters exceeded

Up to 10 attachments (including images) can be used with a maximum of 3.0 MiB each and 30.0 MiB total.

@BehzadNajafizad-1149,
You could try to delete RTC service in AD from ADSI as below:
57162-image.png
Then, re-prepare AD and try again.


If the response is helpful, please click "Accept Answer" and upvote it.


1 Vote 1 ·
image.png (83.3 KiB)

@SharonZhao-MSFT , Thank You for good guidance.

  1. I Clear Value "rangeLower" and "rangeUpper" in “CN=ms-RTC-SIP-SchemaVersion”

  2. Open Active Directory Users and Computers Drill down as follows [Your Domain] Program Data-->Microsoft-->Distributed KeyMan and Delete LyncCertificates

  3. Remove permissions
    - Open Active Directory Users and Computers
    - Right click on your top level domain being cleaned and select Properties
    - From the Properties windows, select the Security tab.
    - Remove all security users titled RTC*
    this level retry for any folder in sub folder in [Your Domain]




0 Votes 0 ·

@BehzadNajafizad-1149,
What is your Skype for Business server version?
It needs Skype for Business server 2015 CU 9 or later to install on Windows Server 2019. For more details, please refer to this article.


If the response is helpful, please click "Accept Answer" and upvote it.

Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.


0 Votes 0 ·
Show more comments