I have been receiving a lot of blue screens lately saying IRQ not less or equal

Safety Scanner

The Microsoft Safety Scanner is a free downloadable security tool that provides on-demand scanning and helps remove viruses, spyware, and other malicious software. It works with your existing antivirus software.

http://www.microsoft.com/security/scanner/en-au/default.aspx

If you can't download or run the Safety Scanner, Windows has a tiny anti virus program built in. It only targets the most common threats. It will want to update, see if it works. If not run it anyway.

Click Start - All Programs - Accessories - Run (or press Winkey + R). Type

mrt

You have a suspicious driver that is in the call stack.

c:\windows\system32\drivers\giomjken.sys

Find the file and right click - Properties - Details tab to see what it is.

If you want to disable.

Start - All Programs - Accessories - Right click Command Prompt and choose Run As Administrator. Type (or copy and paste by right clicking in the Command Prompt window and choosing Paste).

driverquery /v /fo list

and get the module name for the above file. Then type

sc stop modulename

eg

sc stop giomjken

then

sc config giomjken start= disabled

Thanks!

The attached DMP file is of the IRQL_NOT_LESS_OR_EQUAL (a) bugcheck.

A kernel-mode driver or process attempted to access a protected memory location it does not have permission for, or a kernel interrupt request level (IRQL) attempted to access a memory address that is too high.

This bugcheck usually occurs when a driver uses an incorrect memory address. Other possible causes of this error include: bug in a device driver, system service, the BIOS, an old Anti-virus program or backup tool, or possibly memory issues.

Probably caused by : fwpkclnt.sys ( fwpkclnt!FwpsInjectTransportSendAsync0+277 )

^^ This is the FWP/IPsec Kernel-Mode API system driver.

1.

Remove and replace avast! with Microsoft Security Essentials for temporary troubleshooting purposes:

avast! removal tool - http://www.avast.com/uninstall-utility

MSE - http://windows.microsoft.com/en-us/windows/security-essentials-download

2.

If after the above you're still crashing, enable Driver Verifier to look for further device driver corruption and or conflicts:

Driver Verifier:

What is Driver Verifier?

Driver Verifier is included in Windows 8, 7, Windows Server 2008 R2, Windows Vista, Windows Server 2008, Windows 2000, Windows XP, and Windows Server 2003 to promote stability and reliability; you can use this tool to troubleshoot driver issues. Windows kernel-mode components can cause system corruption or system failures as a result of an improperly written driver, such as an earlier version of a Windows Driver Model (WDM) driver.

Essentially, if there's a 3rd party driver believed to be at issue, enabling Driver Verifier will help flush out the rogue driver if it detects a violation.

Before enabling Driver Verifier, it is recommended to create a System Restore Point:

Vista - START | type rstrui - create a restore point

Windows 7 - START | type create | select "Create a Restore Point"

Windows 8 - http://www.eightforums.com/tutorials/4690-restore-point-create-windows-8-a.html

How to enable Driver Verifier:

Start > type "verifier" without the quotes > Select the following options -

1. Select - "Create custom settings (for code developers)"
2. Select - "Select individual settings from a full list"
3. Check the following boxes -

• Special Pool
• Pool Tracking
• Force IRQL Checking
• Deadlock Detection
• Security Checks (Windows 7)
• Concurrentcy Stress Test (Windows 8)
• DDI compliance checking (Windows 8)
• Miscellaneous Checks

4. Select  - "Select driver names from a list"
5. Click on the "Provider" tab. This will sort all of the drivers by the provider.
6. Check EVERY box that is [B]NOT[/B] provided by Microsoft / Microsoft Corporation.
7. Click on Finish.

 8.    Restart.

Important information regarding Driver Verifier:

• If Driver Verifier finds a violation, the system will BSOD.
• After enabling Driver Verifier and restarting the system, depending on the culprit, if for example the driver is on start-up, you may not be able to get back into normal Windows because Driver Verifier will flag it, and as stated above, that will cause / force a BSOD.

If this happens, do not panic, do the following:

• Boot into Safe Mode by repeatedly tapping the F8 key during boot-up.
• Once in Safe Mode - Start > type "system restore" without the quotes.
• Choose the restore point you created earlier.

If you did not set up a restore point, do not worry, you can still disable Driver Verifier to get back into normal Windows:

• Start > Search > type "cmd" without the quotes.
• To turn off Driver Verifier, type in cmd "verifier /reset" without the quotes.

・    Restart and boot into normal Windows.

How long should I keep Driver Verifier enabled for?

It varies, many experts and analysts have different recommendations. Personally, I recommend keeping it enabled for at least 24 hours. If you don't BSOD by then, disable Driver Verifier.

My system BSOD'd, where can I find the crash dumps?

They will be located in %systemroot%\Minidump

Any other questions can most likely be answered by this article:

http://support.microsoft.com/kb/244617

Regards,

Patrick

Here is the mini dump zip folder:

http://xportcms.com/siteresources/data/files/minidump.zip

Hi,

In order to assist you, we will need the DMP files to analyze what exactly occurred at the time of the crash, etc.

If you don't know where DMP files are located, here's how to get to them:

 1.    Navigate to the %systemroot%\Minidump folder.

 2.    Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.

 3.    Upload the zip containing the DMP files to Skydrive or a hosting site of your choice and paste in your reply.

If you are going to use Skydrive but don't know how to upload to it, please visit the following:

http://www.wikihow.com/Use-SkyDrive

Please note that any "cleaner" programs such as TuneUp Utilities, CCleaner, etc, by default will delete DMP files upon use.

If your computer is not generating DMP files, please do the following:

1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system log'.

Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.

4. Double check that the WERS is ENABLED:

Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.

If you cannot get into normal mode to do any of this, please do this via Safe Mode.

Regards,

Patrick