All about Dynamics AX https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/feed.xml Tue, 16 Apr 2019 05:04:46 GMT en-US hourly 1 AX 2012 - Add new address in existing Party through code https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/ax-2012-add-new-address-in-existing-party-through-code Sat, 24 Sep 2011 11:14:00 GMT https://blogs.msdn.microsoft.com/dynamics_ax_horizon/2011/09/24/ax-2012-add-new-address-in-existing-party-through-code/ LogisticsLocation   location;
    RecId               LocationRecId;
    DirPartyRecId       partyRecId = 5637174415;
    LogisticsElectronicAddress      electronicAddress;

    location = LogisticsLocation::create(DirPartyTable::findRec(partyRecId).name, false);
    DirParty::addLocation(partyRecId, location.RecId, false, true);
    electronicAddress.Location = location.RecId;
    electronicAddress.Type = LogisticsElectronicAddressMethodType::Fax;
    electronicAddress.Locator = '09012345';
    electronicAddress.ValidFrom = DirUtility::getCurrentDateTime();
    electronicAddress.ValidTo   = DateTimeUtil::maxValue();
    electronicAddress.insert();

]]> AX 2012 - Get Active Dimensions from Accounting structure https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/ax-2012-get-active-dimensions-from-accounting-structure Sat, 24 Sep 2011 11:11:07 GMT https://blogs.msdn.microsoft.com/dynamics_ax_horizon/2011/09/24/ax-2012-get-active-dimensions-from-accounting-structure/     DimensionAttribute              dimAttr;
    DimensionAttributeSetItem       dimAttrSetItem;
    DimensionAttributeSetItem       dimAttrSetItemEditable;
    DimensionEnumeration            dimensionSetId;
    recId   editableDimensionAttributeSetId;

    ;
   
    dimensionSetId = DimensionCache::getDimensionAttributeSetForLedger();
    // Get all the active dimensions from Accounting Structure.
     while select RecId from dimAttr
        order by Name
        join RecId from dimAttrSetItem
            where dimAttrSetItem.DimensionAttribute == dimAttr.RecId &&
                dimAttrSetItem.DimensionAttributeSet == dimensionSetId
        outer join RecId from dimAttrSetItemEditable
            where dimAttrSetItemEditable.DimensionAttributeSet == editableDimensionAttributeSetId &&
                dimAttrSetItemEditable.DimensionAttribute == dimAttr.RecId &&
                dimAttrSetItemEditable.EnumerationValue == NoYes::Yes
    {
       
        Info(dimAttr.name);
    }

}

]]> AX 2012 - Create new Worker/Employee through code https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/ax-2012-create-new-workeremployee-through-code Fri, 29 Jul 2011 05:42:49 GMT https://blogs.msdn.microsoft.com/dynamics_ax_horizon/2011/07/29/ax-2012-create-new-workeremployee-through-code/ DirPersonName   DirPersonName;
DirPersonName.initValue();
DirPersonName.FirstName = "Pri02";
DirPersonName.LastName = "sin02";
   
HcmWorkerTransition::newCreateHcmWorker(DirPersonName, "Empl_001");

]]> AX 2012 - Create new Name & Address through code https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/ax-2012-create-new-name-address-through-code Fri, 29 Jul 2011 02:26:00 GMT https://blogs.msdn.microsoft.com/dynamics_ax_horizon/2011/07/29/ax-2012-create-new-name-address-through-code/ static void createNameAndAddress(Args _args)
{
    DirPartyPostalAddressView   addressView;
    Name                        name;
    DirPartyRecId               partyRecId;
    DirParty                    dirParty;
    ;
    //Create new Name
    partyRecId = DirPartyTable::createNew( DirPartyType::Organization, name).RecId;
   
    addressView.CountryRegionId = "USA";
    addressView.State = "OH";
    addressView.ZipCode = "00210";
    addressView.Street  = "Park Ave";
    addressView.Party = partyRecId;
    
    //Handel errors for addresses
    if (!LogisticsAddressCountryRegion::exist(addressView.CountryRegionId))
        throw error(strFmt("@SYS9347",addressView.CountryRegionId));
    if (addressView.County && !LogisticsAddressCounty::exist(addressView.CountryRegionId, addressView.State, addressView.County))
        throw error(strFmt("@SYS72719",addressView.County));
    if (addressView.State && !LogisticsAddressState::exist(addressView.CountryRegionId, addressView.State))
        throw error(strFmt("@SYS72786",addressView.State));
    if (!LogisticsAddressZipCode::exist(addressView.ZipCode))
        throw error(strFmt("@SYS24626",addressView.ZipCode));

    addressView.Party  = partyRecId;
    if( addressView.Street || addressView.ZipCode || addressView.City || addressView.State || addressView.CountryRegionId)
    {
        DirParty = DirParty::constructFromPartyRecId(addressView.Party );
        DirParty.createOrUpdatePostalAddress(addressView);
    }

}

]]> Debug in AIF Classes https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/debug-in-aif-classes Wed, 01 Sep 2010 00:38:44 GMT https://blogs.msdn.microsoft.com/dynamics_ax_horizon/2010/09/01/debug-in-aif-classes/ Enable Debug on AIF Classes in AX 4.0

 There is a Piece of code in \Classes\AifOutboundProcessingService\run or \Classes\AifInboundProcessingService\run

 

runas(message.sourceEndpointAxUserId(),

                        classnum(AifInboundProcessingService),

                        staticmethodstr(AifInboundProcessingService, processAsUser),

                        [message.pack(), messageId]);

 

just comment this code and change the scope of the static method processAsUser from the same class to public and then call it exactly as below in the run method

 

                             AifInboundProcessingService::processAsUser([message.pack(), messageId]);

 

this would allow you to debug the code in Aif and the Axd's but make sure you delete these changes once you complete your debugging.

 

 

]]> Get the EDT realation of particular table https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/get-the-edt-realation-of-particular-table Tue, 13 Apr 2010 09:07:00 GMT https://blogs.msdn.microsoft.com/dynamics_ax_horizon/2010/04/13/get-the-edt-realation-of-particular-table/ static void getFieldRel(Args _args)
{
    int i = 1;
    DictField dictField;
    DictRelation DR = new DictRelation(Tablenum(InventTable));
    DictTable Dict = new DictTable(Tablenum(InventTable));
    DictTable Formref;
;
    while(i <= Dict.fieldCnt())
    {
        if(DR.loadFieldRelation(dict.fieldCnt2Id(i)))
        {
        Formref = new DictTable(DR.loadFieldRelation(dict.fieldCnt2Id(i)));
        info("Table Name " + Formref.name());
        }
        i +=1;
    }

pause;
}

]]> Closing all windows in AX https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/closing-all-windows-in-ax Tue, 13 Apr 2010 04:50:00 GMT https://blogs.msdn.microsoft.com/dynamics_ax_horizon/2010/04/13/closing-all-windows-in-ax/ void closeAllWindows()
{
     hwnd _hwnd, tempHwnd;
    #WinApi;

    While
    (WinApi::getWindow(WinAPI::getWindow(infolog.hWnd(),#GW_CHILD),#GW_CHILD))
    {
        _hwnd =
            WinAPI::getWindow(WinAPI::getWindow(infolog.hWnd(),#GW_CHILD),#GW_CHILD);
            WinAPI::sendMessageEx(_hwnd,#wm_sysCommand,#sc_close,0);

        if(_hwnd == tempHwnd)
            break;

        tempHwnd = _hwnd;
   }

}

]]> BP check through code https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/bp-check-through-code Tue, 13 Apr 2010 03:56:00 GMT https://blogs.msdn.microsoft.com/dynamics_ax_horizon/2010/04/13/bp-check-through-code/ static void BPCheck(Args _args)
{
    SysBPCheck sysBPCheck;
    #AOT
    Args args;
    TreeNode contextNode;
    ;

    args=new Args();
    contextNode = infolog.findNode(#ClassesPath+"\\Activities");
    args.object(contextNode);
    SysBPCheck::main(args);
}

]]> Get application path https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/get-application-path Tue, 13 Apr 2010 03:50:00 GMT https://blogs.msdn.microsoft.com/dynamics_ax_horizon/2010/04/13/get-application-path/

xInfo::directory( DirectoryType: :Appl)

]]> Open Outlook appointment from AX https://docs.microsoft.com/archive/blogs/dynamics_ax_horizon/open-outlook-appointment-from-ax Tue, 13 Apr 2010 03:47:00 GMT https://blogs.msdn.microsoft.com/dynamics_ax_horizon/2010/04/13/open-outlook-appointment-from-ax/ static void OutlookAppointment( Args _args)
{
  COM sysOutlookCollectio n;
  COM collection;
  COMVariant StartDate = new COMVariant() ;
  COMVariant EndDate = new COMVariant() ;
  COM c;
   #SysOutLookCOMDEF
   #define.mapi("MAPI")
   #define.outlook("Outlook.Application")
   COM sysOutlook;
   COM sysOutlookNameSpace ;
   COM sysOutlookMAPIFolde r;
;
   sysOutlook = new COM(#outlook) ;
   sysOutlookNameSpace = sysOutlook.getNames pace(#mapi) ;
   sysOutlookNameSpace .logon();
   sysOutlookMAPIFolde r = sysOutlookNameSpace .getDefaultFolde r (#OlDefaultFolders_ olFolderCalendar );
   collection = sysOutlookMAPIFolde r.items() ;
   c = collection.add( );
   comStartDate. date(systemDateGet( ));
   comStartDate. time(str2Time( "18:00:00"));
   comEndDate.date( today());
   comEndDate.time( str2Time( "18:30:00"));
   c.location("Some location");
   c.subject("Some subject");
   c.body(Some contents");
   c.start(comStartDat e);
   c.end(comEndDate) ;
   c.save();
   if (c)
   {
     c.display();
     info("This has been created in Microsoft Outlook");
   }
   else
    throw error("Error");
    sysOutlookNameSpace .logoff() ;
}

]]>