System requirements for Azure Stack HCI
Applies to: Azure Stack HCI, versions 21H2 and 20H2
Use this topic to assess system requirements for servers, storage, and networking for Azure Stack HCI.
A standard Azure Stack HCI cluster requires a minimum of one server and a maximum of 16 servers.
Keep the following in mind for various types of Azure Stack HCI deployments:
- Stretched clusters require servers to be deployed at two separate sites. The sites can be in different countries, different cities, different floors, or different rooms. A stretched cluster requires a minimum of 4 servers (2 per site) and a maximum of 16 servers (8 per site). Each site must have the same number of servers and drives.
Stretch clusters are not supported in a single server configuration.
It's required that all servers be the same manufacturer and model, using 64-bit Intel Nehalem grade, AMD EPYC grade, or later compatible processors with second-level address translation (SLAT). A second-generation Intel Xeon Scalable processor is required to support Intel Optane DC persistent memory. Processors must be at least 1.4 GHz and compatible with the x64 instruction set.
Make sure that the servers are equipped with at least 32 GB of RAM per node to accommodate the server operating system, VMs, and other apps or workloads. In addition, allow 4 GB of RAM per terabyte (TB) of cache drive capacity on each server for Storage Spaces Direct metadata.
Verify that virtualization support is turned on in the BIOS or UEFI:
- Hardware-assisted virtualization. This is available in processors that include a virtualization option, specifically processors with Intel Virtualization Technology (Intel VT) or AMD Virtualization (AMD-V) technology.
- Hardware-enforced Data Execution Prevention (DEP) must be available and enabled. For Intel systems, this is the XD bit (execute disable bit). For AMD systems, this is the NX bit (no execute bit).
You can use any boot device supported by Windows Server, which now includes SATADOM. RAID 1 mirror is not required, but is supported for boot. A 200 GB minimum size is recommended.
For additional feature-specific requirements for Hyper-V, see System requirements for Hyper-V on Windows Server.
Azure Stack HCI works with direct-attached SATA, SAS, NVMe, or persistent memory drives that are physically attached to just one server each.
For best results, adhere to the following:
Every server in the cluster should have the same types of drives and the same number of each type. It's also recommended (but not required) that the drives be the same size and model. Drives can be internal to the server, or in an external enclosure that is connected to just one server. To learn more, see Drive symmetry considerations.
Each server in the cluster should have dedicated volumes for logs, with log storage at least as fast as data storage. Stretched clusters require at least two volumes: one for replicated data, and one for log data.
SCSI Enclosure Services (SES) is required for slot mapping and identification. Each external enclosure must present a unique identifier (Unique ID).
NOT SUPPORTED: RAID controller cards or SAN (Fibre Channel, iSCSI, FCoE) storage, shared SAS enclosures connected to multiple servers, or any form of multi-path IO (MPIO) where drives are accessible by multiple paths. Host-bus adapter (HBA) cards must implement simple pass-through mode for any storage devices used for Storage Spaces Direct.
An Azure Stack HCI cluster requires a reliable high-bandwidth, low-latency network connection between each server node.
- Verify at least one network adapter is available and dedicated for cluster management.
- Verify that physical switches in your network are configured to allow traffic on any VLANs you will use.
For physical networking considerations and requirements, see Physical network requirements.
For host networking considerations and requirements, see Host network requirements.
Software Defined Networking (SDN) requirements
When you create an Azure Stack HCI cluster using Windows Admin Center, you have the option to deploy Network Controller to enable Software Defined Networking (SDN). If you intend to use SDN on Azure Stack HCI:
Make sure the host servers have at least 50-100 GB of free space to create the Network Controller VMs.
You must copy a virtual hard disk (VHD) of the Azure Stack HCI operating system to the first node in the cluster in order to create the Network Controller VMs. You can prepare the VHD using Sysprep or by running the Convert-WindowsImage PowerShell cmdlet to convert an .iso file into a VHD.
SDN is not supported on stretched (multi-site) clusters.
There are no special domain functional level requirements for Azure Stack HCI - just an operating system version for your domain controller that's still supported. We do recommend turning on the Active Directory Recycle Bin feature as a general best practice, if you haven't already. to learn more, see Active Directory Domain Services Overview.
Maximum supported hardware specifications
Azure Stack HCI deployments that exceed the following specifications are not supported:
|Physical servers per cluster||16|
|VMs per host||1,024|
|Disks per VM (SCSI)||256|
|Storage per cluster||16 PB|
|Storage per server||400 TB|
|Volumes per cluster||64|
|Volume size||64 TB|
|Logical processors per host||512|
|RAM per host||24 TB|
|RAM per VM||12 TB (generation 2 VM) or 1 TB (generation 1)|
|Virtual processors per host||2,048|
|Virtual processors per VM||240 (generation 2 VM) or 64 (generation 1)|
For related information, see also:
Submit and view feedback for