PSRemotingBaseCmdlet Class

Definition

Namespace:

Microsoft.PowerShell.Commands

Assembly:

System.Management.Automation.dll

Package:

System.Management.Automation v7.4.0

Base class for any cmdlet which takes a -Session parameter or a -ComputerName parameter (along with its other associated parameters). The following cmdlets currently fall under this category: 1. New-PSSession 2. Invoke-Expression 3. Start-PSJob.

public ref class PSRemotingBaseCmdlet abstract : Microsoft::PowerShell::Commands::PSRemotingCmdlet

public abstract class PSRemotingBaseCmdlet : Microsoft.PowerShell.Commands.PSRemotingCmdlet

type PSRemotingBaseCmdlet = class
    inherit PSRemotingCmdlet

Public MustInherit Class PSRemotingBaseCmdlet
Inherits PSRemotingCmdlet

Inheritance

Object

InternalCommand

Cmdlet

PSCmdlet

PSRemotingCmdlet

PSRemotingBaseCmdlet

Derived

Microsoft.PowerShell.Commands.EnterPSSessionCommand

Microsoft.PowerShell.Commands.NewPSSessionCommand

Microsoft.PowerShell.Commands.PSExecutionCmdlet

Constructors

PSRemotingBaseCmdlet()

Fields

ComputerInstanceIdParameterSet	Computername with session instance ID parameter set. (Inherited from PSRemotingCmdlet)
ComputerNameParameterSet	Computername parameter set. (Inherited from PSRemotingCmdlet)
ContainerIdParameterSet	Container ID parameter set. (Inherited from PSRemotingCmdlet)
DefaultPowerShellRemoteShellAppName	Default application name for the connection uri. (Inherited from PSRemotingCmdlet)
DefaultPowerShellRemoteShellName	Default shellname. (Inherited from PSRemotingCmdlet)
SessionParameterSet	Runspace parameter set. (Inherited from PSRemotingCmdlet)
SSHHostHashParameterSet	SSH host parmeter set supporting hash connection parameters. (Inherited from PSRemotingCmdlet)
SSHHostParameterSet	SSH host parameter set. (Inherited from PSRemotingCmdlet)
UriParameterSet	Uri parameter set.
UseWindowsPowerShellParameterSet	Parameter set to use Windows PowerShell. (Inherited from PSRemotingCmdlet)
VMIdParameterSet	VM guid parameter set. (Inherited from PSRemotingCmdlet)
VMNameParameterSet	VM name parameter set. (Inherited from PSRemotingCmdlet)

Properties

AllowRedirection	The AllowRedirection parameter enables the implicit redirection functionality.
ApplicationName	This parameters specifies the appname which identifies the connection end point on the remote machine. If this parameter is not specified then the value specified in DEFAULTREMOTEAPPNAME will be used. If that's not specified as well, then "WSMAN" will be used.
Authentication	Use basic authentication to authenticate the user.
CertificateThumbprint	Specifies the certificate thumbprint to be used to impersonate the user on the remote machine.
CommandOrigin	This property tells you if you were being invoked inside the runspace or if it was an external request. (Inherited from InternalCommand)
CommandRuntime	Holds the command runtime object for this command. This object controls what actually happens when a write is called. (Inherited from Cmdlet)
ComputerName	This parameter represents the address(es) of the remote computer(s). The following formats are supported: (a) Computer name (b) IPv4 address : 132.3.4.5 (c) IPv6 address: 3ffe:8311:ffff:f70f:0:5efe:172.30.162.18.
ConnectingTimeout	Gets or sets a value in milliseconds that limits the time allowed for an SSH connection to be established. Default timeout value is infinite.
ConnectionUri	A complete URI(s) specified for the remote computer and shell to connect to and create runspace for.
ContainerId	ID of target container.
Credential	Specifies the credentials of the user to impersonate in the remote machine. If this parameter is not specified then the credentials of the current user process will be assumed.
CurrentPSTransaction	Gets an object that surfaces the current PowerShell transaction. When this object is disposed, PowerShell resets the active transaction. (Inherited from Cmdlet)
Events	Gets the event manager for the current runspace. (Inherited from PSCmdlet)
Host	Gets the host interaction APIs. (Inherited from PSCmdlet)
HostName	Host name for an SSH remote connection.
InvokeCommand	Provides access to utility routines for executing scripts and creating script blocks. (Inherited from PSCmdlet)
InvokeProvider	Gets the instance of the provider interface APIs for the current runspace. (Inherited from PSCmdlet)
JobManager	Manager for JobSourceAdapters registered. (Inherited from PSCmdlet)
JobRepository	Repository for jobs. (Inherited from PSCmdlet)
KeyFilePath	SSH Key File Path.
MyInvocation	Contains information about the identity of this cmdlet and how it was invoked. (Inherited from PSCmdlet)
Options	Gets or sets the Hashtable containing options to be passed to OpenSSH.
PagingParameters	If the cmdlet declares paging support (via SupportsPaging), then PagingParameters property contains arguments of the paging parameters. Otherwise PagingParameters property is null. (Inherited from PSCmdlet)
ParameterSetName	The name of the parameter set in effect. (Inherited from PSCmdlet)
Port	Port specifies the alternate port to be used in case the default ports are not used for the transport mechanism (port 80 for http and port 443 for useSSL)
ResolvedComputerNames	Computer names after they have been resolved (null, empty string, "." resolves to localhost)
RunAsAdministrator	When set, PowerShell process inside container will be launched with high privileged account. Otherwise (default case), PowerShell process inside container will be launched with low privileged account.
Session	The PSSession object describing the remote runspace using which the specified cmdlet operation will be performed.
SessionOption	Extended Session Options for controlling the session creation. Use "New-WSManSessionOption" cmdlet to supply value for this parameter.
SessionState	Gets the instance of session state for the current runspace. (Inherited from PSCmdlet)
SSHConnection	Hashtable array containing SSH connection parameters for each remote target ComputerName (Alias: HostName) (required) UserName (optional) KeyFilePath (Alias: IdentityFilePath) (optional)
SSHTransport	This parameter specifies that SSH is used to establish the remote connection and act as the remoting transport. By default WinRM is used as the remoting transport. Using the SSH transport requires that SSH is installed and PowerShell remoting is enabled on both client and remote machines.
Stopping	Is this command stopping? (Inherited from Cmdlet)
Subsystem	Gets or sets a value for the SSH subsystem to use for the remote connection.
ThrottleLimit	Allows the user of the cmdlet to specify a throttling value for throttling the number of remote operations that can be executed simultaneously.
UserName	SSH User Name.
UseSSL	This parameter suggests that the transport scheme to be used for remote connections is useSSL instead of the default http.Since there are only two possible transport schemes that are possible at this point, a SwitchParameter is being used to switch between the two.
VMId	Guid of target virtual machine.
VMName	Name of target virtual machine.

Methods

BeginProcessing()	Resolves shellname and appname.
CurrentProviderLocation(String)	(Inherited from PSCmdlet)
EndProcessing()	When overridden in the derived class, performs clean-up after the command execution. Default implementation in the base class just returns. (Inherited from Cmdlet)
GetResolvedProviderPathFromPSPath(String, ProviderInfo)	(Inherited from PSCmdlet)
GetResourceString(String, String)	Gets the resource string corresponding to baseName and resourceId from the current assembly. You should override this if you require a different behavior. (Inherited from Cmdlet)
GetUnresolvedProviderPathFromPSPath(String)	(Inherited from PSCmdlet)
GetVariableValue(String)	(Inherited from PSCmdlet)
GetVariableValue(String, Object)	(Inherited from PSCmdlet)
Invoke()	Invoke this cmdlet object returning a collection of results. (Inherited from Cmdlet)
Invoke<T>()	Returns a strongly-typed enumerator for the results of this cmdlet. (Inherited from Cmdlet)
ParseSshHostName(String, String, String, Int32)	Parse a hostname used with SSH Transport to get embedded username and/or port.
ProcessRecord()	When overridden in the derived class, performs execution of the command. (Inherited from Cmdlet)
ResolveAppName(String)	Determines the appname to be used based on the following order: 1. AppName parameter specified 2. DEFAULTREMOTEAPPNAME variable set 3. WSMan. (Inherited from PSRemotingCmdlet)
ResolveComputerName(String)	Resolves a computer name. If its null or empty its assumed to be localhost. (Inherited from PSRemotingCmdlet)
ResolveComputerNames(String[], String[])	Resolve all the machine names provided. Basically, if a machine name is '.' assume localhost. (Inherited from PSRemotingCmdlet)
ResolveShell(String)	Determines the shellname to use based on the following order: 1. ShellName parameter specified 2. DEFAULTREMOTESHELLNAME variable set 3. PowerShell. (Inherited from PSRemotingCmdlet)
ShouldContinue(String, String)	Confirm an operation or grouping of operations with the user. This differs from ShouldProcess in that it is not affected by preference settings or command-line parameters, it always does the query. This variant only offers Yes/No, not YesToAll/NoToAll. (Inherited from Cmdlet)
ShouldContinue(String, String, Boolean, Boolean)	Confirm an operation or grouping of operations with the user. This differs from ShouldProcess in that it is not affected by preference settings or command-line parameters, it always does the query. This variant offers Yes, No, YesToAll and NoToAll. (Inherited from Cmdlet)
ShouldContinue(String, String, Boolean, Boolean, Boolean)	Confirm an operation or grouping of operations with the user. This differs from ShouldProcess in that it is not affected by preference settings or command-line parameters, it always does the query. This variant offers Yes, No, YesToAll and NoToAll. (Inherited from Cmdlet)
ShouldProcess(String)	Confirm the operation with the user. Cmdlets which make changes (e.g. delete files, stop services etc.) should call ShouldProcess to give the user the opportunity to confirm that the operation should actually be performed. (Inherited from Cmdlet)
ShouldProcess(String, String)	Confirm the operation with the user. Cmdlets which make changes (e.g. delete files, stop services etc.) should call ShouldProcess to give the user the opportunity to confirm that the operation should actually be performed. This variant allows the caller to specify text for both the target resource and the action. (Inherited from Cmdlet)
ShouldProcess(String, String, String)	Confirm the operation with the user. Cmdlets which make changes (e.g. delete files, stop services etc.) should call ShouldProcess to give the user the opportunity to confirm that the operation should actually be performed. This variant allows the caller to specify the complete text describing the operation, rather than just the name and action. (Inherited from Cmdlet)
ShouldProcess(String, String, String, ShouldProcessReason)	Confirm the operation with the user. Cmdlets which make changes (e.g. delete files, stop services etc.) should call ShouldProcess to give the user the opportunity to confirm that the operation should actually be performed. This variant allows the caller to specify the complete text describing the operation, rather than just the name and action. (Inherited from Cmdlet)
StopProcessing()	When overridden in the derived class, interrupts currently running code within the command. It should interrupt BeginProcessing, ProcessRecord, and EndProcessing. Default implementation in the base class just returns. (Inherited from Cmdlet)
ThrowTerminatingError(ErrorRecord)	Terminate the command and report an error. (Inherited from Cmdlet)
TransactionAvailable()	Returns true if a transaction is available and active. (Inherited from Cmdlet)
ValidateComputerName(String[])	Validates computer names to check if none of them happen to be a Uri. If so this throws an error.
ValidateRemoteRunspacesSpecified()	Validate the PSSession objects specified and write appropriate error records.
WriteCommandDetail(String)	Write text into pipeline execution log. (Inherited from Cmdlet)
WriteDebug(String)	Display debug information. (Inherited from Cmdlet)
WriteError(ErrorRecord)	Internal variant: Writes the specified error to the error pipe. (Inherited from Cmdlet)
WriteInformation(InformationRecord)	Route information to the user or host. (Inherited from Cmdlet)
WriteInformation(Object, String[])	Route information to the user or host. (Inherited from Cmdlet)
WriteObject(Object)	Writes the object to the output pipe. (Inherited from Cmdlet)
WriteObject(Object, Boolean)	Writes one or more objects to the output pipe. If the object is a collection and the enumerateCollection flag is true, the objects in the collection will be written individually. (Inherited from Cmdlet)
WriteProgress(ProgressRecord)	Display progress information. (Inherited from Cmdlet)
WriteVerbose(String)	Display verbose information. (Inherited from Cmdlet)
WriteWarning(String)	Display warning information. (Inherited from Cmdlet)