Path markup syntax

Browse the sample

.NET Multi-platform App UI (.NET MAUI) path markup syntax enables you to compactly specify path geometries in XAML.

Path markup syntax is specified as a string value to the Path.Data property:

<Path Stroke="Black"
      Data="M13.908992,16.207977 L32.000049,16.207977 32.000049,31.999985 13.908992,30.109983Z" />

Path markup syntax is composed of an optional FillRule value, and one or more figure descriptions. This syntax can be expressed as: <Path Data="[fillRule] figureDescription [figureDescription] * " ... />

In this syntax:

• fillRule is an optional FillRule that specifies whether the geometry should use the EvenOdd or Nonzero fill rule. F0 is used to specify the EvenOdd fill rule, while F1 is used to specify the Nonzero fill rule. For more information about fill rules, see Fill rules.
• figureDescription represents a figure composed of a move command, draw commands, and an optional close command. A move command specifies the start point of the figure. Draw commands describe the figure's contents, and the optional close command closes the figure.

In the example above, the path markup syntax specifies a start point using the move command (M), a series of straight lines using the line command (L), and closes the path with the close command (Z).

In path markup syntax, spaces are not required before or after commands. In addition, two numbers don't have to be separated by a comma or white space, but this can only be achieved when the string is unambiguous.

Tip

Path markup syntax is compatible with Scalable Vector Graphics (SVG) image path definitions, and so it can be useful for porting graphics from SVG format.

While path markup syntax is intended for consumption in XAML, it can be converted to a Geometry object in code by invoking the ConvertFromInvariantString method in the PathGeometryConverter class:

Geometry pathData = (Geometry)new PathGeometryConverter().ConvertFromInvariantString("M13.908992,16.207977 L32.000049,16.207977 32.000049,31.999985 13.908992,30.109983Z");

Move command

The move command specifies the start point of a new figure. The syntax for this command is: M startPoint or m startPoint.

In this syntax, startPoint is a Point structure that specifies the start point of a new figure. If you list multiple points after the move command, a line is drawn to those points.

M 10,10 is an example of a valid move command.

Draw commands

A draw command can consist of several shape commands. The following draw commands are available:

• Line (L or l).
• Horizontal line (H or h).
• Vertical line (V or v).
• Elliptical arc (A or a).
• Cubic Bezier curve (C or c).
• Quadratic Bezier curve (Q or q).
• Smooth cubic Bezier curve (S or s).
• Smooth quadratic Bezier curve (T or t).

Each draw command is specified with a case-insensitive letter. When sequentially entering more than one command of the same type, you can omit the duplicate command entry. For example L 100,200 300,400 is equivalent to L 100,200 L 300,400.

Line command

The line command creates a straight line between the current point and the specified end point. The syntax for this command is: L endPoint or l endPoint.

In this syntax, endPoint is a Point that represents the end point of the line.

L 20,30 and L 20 30 are examples of valid line commands.

For information about creating a straight line as a PathGeometry object, see Create a LineSegment.

Horizontal line command

The horizontal line command creates a horizontal line between the current point and the specified x-coordinate. The syntax for this command is: H x or h x.

In this syntax, x is a double that represents the x-coordinate of the end point of the line.

H 90 is an example of a valid horizontal line command.

Vertical line command

The vertical line command creates a vertical line between the current point and the specified y-coordinate. The syntax for this command is: V y or v y.

In this syntax, y is a double that represents the y-coordinate of the end point of the line.

V 90 is an example of a valid vertical line command.

Elliptical arc command

The elliptical arc command creates an elliptical arc between the current point and the specified end point. The syntax for this command is: A size rotationAngle isLargeArcFlag sweepDirectionFlag endPoint or a size rotationAngle isLargeArcFlag sweepDirectionFlag endPoint.

In this syntax:

• size is a Size that represents the x- and y-radius of the arc.
• rotationAngle is a double that represents the rotation of the ellipse, in degrees.
• isLargeArcFlag should be set to 1 if the angle of the arc should be 180 degrees or greater, otherwise set it to 0.
• sweepDirectionFlag should be set to 1 if the arc is drawn in a positive-angle direction, otherwise set it to 0.
• endPoint is a Point to which the arc is drawn.

A 150,150 0 1,0 150,-150 is an example of a valid elliptical arc command.

For information about creating an elliptical arc as a PathGeometry object, see Create an ArcSegment.

Cubic Bezier curve command

The cubic Bezier curve command creates a cubic Bezier curve between the current point and the specified end point by using the two specified control points. The syntax for this command is: C controlPoint1 controlPoint2 endPoint or c controlPoint1 controlPoint2 endPoint.

In this syntax:

• controlPoint1 is a Point that represents the first control point of the curve, which determines the starting tangent of the curve.
• controlPoint2 is a Point that represents the second control point of the curve, which determines the ending tangent of the curve.
• endPoint is a Point that represents the point to which the curve is drawn.

C 100,200 200,400 300,200 is an example of a valid cubic Bezier curve command.

For information about creating a cubic Bezier curve as a PathGeometry object, see Create a BezierSegment.

Quadratic Bezier curve command

The quadratic Bezier curve command creates a quadratic Bezier curve between the current point and the specified end point by using the specified control point. The syntax for this command is: Q controlPoint endPoint or q controlPoint endPoint.

In this syntax:

• controlPoint is a Point that represents the control point of the curve, which determines the starting and ending tangents of the curve.
• endPoint is a Point that represents the point to which the curve is drawn.

Q 100,200 300,200 is an example of a valid quadratic Bezier curve command.

For information about creating a quadratic Bezier curve as a PathGeometry object, see Create a QuadraticBezierSegment.

Smooth cubic Bezier curve command

The smooth cubic Bezier curve command creates a cubic Bezier curve between the current point and the specified end point by using the specified control point. The syntax for this command is: S controlPoint2 endPoint or s controlPoint2 endPoint.

In this syntax:

• controlPoint2 is a Point that represents the second control point of the curve, which determines the ending tangent of the curve.
• endPoint is a Point that represents the point to which the curve is drawn.

The first control point is assumed to be the reflection of the second control point of the previous command, relative to the current point. If there is no previous command, or the previous command was not a cubic Bezier curve command or a smooth cubic Bezier curve command, the first control point is assumed to be coincident with the current point.

S 100,200 200,300 is an example of a valid smooth cubic Bezier curve command.

Smooth quadratic Bezier curve command

The smooth quadratic Bezier curve command creates a quadratic Bezier curve between the current point and the specified end point by using a control point. The syntax for this command is: T endPoint or t endPoint.

In this syntax, endPoint is a Point that represents the point to which the curve is drawn.

The control point is assumed to be the reflection of the control point of the previous command relative to the current point. If there is no previous command or if the previous command was not a quadratic Bezier curve or a smooth quadratic Bezier curve command, the control point is assumed to be coincident with the current point.

T 100,30 is an example of a valid smooth quadratic cubic Bezier curve command.

Close command

The close command ends the current figure and creates a line that connects the current point to the starting point of the figure. Therefore, this command creates a line-join between the last segment and the first segment of the figure.

The syntax for the close command is: Z or z.

Additional values

Instead of a standard numerical value, you can also use the following case-sensitive special values:

• Infinity represents double.PositiveInfinity.
• -Infinity represents double.NegativeInfinity.
• NaN represents double.NaN.

In addition, you may also use case-insensitive scientific notation. Therefore, +1.e17 is a valid value.