Add an Entity to Master Data Management

Important

This content is archived and is not being updated. For the latest documentation, see Microsoft Dynamics 365 product documentation. For the latest release plans, see Dynamics 365 and Microsoft Power Platform release plans.

Applies To: Microsoft Dynamics AX 2012 R3

Out of the box, Microsoft Dynamics AX Master Data Management (MDM) supports synchronization of the Customers, Vendors, Employees, Global Address Book, and Product entities. To synchronize any other data, you can use an existing entity or create a custom Data Import/Export Framework entity and then add settings that make the Data Import/Export Framework entity available to MDM. MDM does not support compound Data Import/Export Framework entities.

Add an Existing Entity to MDM

To add an existing entity to MDM, follow these steps.

  1. In Microsoft Dynamics AX, go to Data import export framework > Setup > Target entities. Locate the entity to enable for MDM, and record the entity name, staging table, entity class, and target table.

  2. Open a development workspace, and add a change tracking query for the entity:

    1. Right-click the Queries folder, and then click New query.

    2. Right-click the new query, and then click Rename.

    3. Rename the query Mdm<staging_table_name>CTQuery.

  3. Add the tables that the entity is based on as the data source for the change tracking query. You must add all the tables that the entity is based on as data sources for the query and create relationships between them. This allows MDM to monitor all of the related tables for changes. For instructions, see How to: Create Queries by using the AOT.

    Note

    DMFCustomerEntityCTQuery is a good example of query based on multiple related tables.

  4. Expand the DataDictionary folder, expand Tables, expand DMFEntity, and then expand the Methods folder. Double-click the DefaultEntityEx method to open it.

  5. In the switch statement in the DefaultEntityEx method, add a case statement that is named case DMFEntityType::<entity name>:. Add the following code to make the entity visible in MDM forms. Substitute the entity information that you recorded in step 1.

    case DMFEntityType:: <entity name>::
    this.TargetEntity = queryStr(<entity target table name>);
    this.EntityClass  = classStr(<entity class name>);
    this.EntityTable  = tableStr(<entity staging table name>);
    this.Mdm = NoYes::Yes;
    isfound = true;
    break;
    

    The following example shows the code for the Barcode setup entity.

    case DMFEntityType::BarcodeSetup:
    this.TargetEntity = queryStr(DMFBarcodeSetupTargetEntity);
    this.EntityClass  = classStr(DMFBarcodeSetupEntityClass);
    this.EntityTable  = tableStr(DMFBarcodeSetupEntity);
    this.Mdm = NoYes::Yes;
    isfound = true;
    break;
    
  6. Click Compile, and then click Save.

  7. Right-click the DMFEntity table, and then click Open. Locate the row for the entity you are enabling for MDM, and select the Mdm checkbox for that entity. When you are finished, click Close.

  8. Expand the DataDictionary folder, expand the entity staging table, and then expand the Fields folder. Identify the natural key field for this table. Right-click the field, and then click Properties. The development workspace displays the properties of the field. Record the values for the Type and StringSize properties.

  9. In the staging table that MDM will use, create a key field: right-click Fields, click New, and then click the data type that matches the value of the Type property for the natural key.

  10. Right-click the new field, and then click Properties. Rename the field AxMdmCode, and modify other properties as required, so that the field matches the natural key field. For example, modify the StringSize property.

  11. In the staging table, right-click the Methods folder, click Override method, and then click insert. Modify the insert method by adding the following line before the super(); line.

    this.AxMdmCode = this.<staging table natural key field>;

    MDM uses this field for change tracking. If a conflict occurs, MDM replaces the value of this field in the secondary record with a GUID, but the natural key remains the same. The primary record still has the natural key value in this field. Therefore, you can see that two records are the same, because they have the same natural key. However, you can also see that the fields are in conflict, because the AxMdmcode values do not match. The following example shows a natural key field that is named AccountKey.

    public void Insert()
    {
    this.AxMdmCode = this.AccountKey;
    super();
    }
    
  12. Click Compile, and then click Save.

  13. In Microsoft Dynamics AX, go to Data import export framework > Setup, and then click Target entities.

  14. In the Target entities form, click New. In the row that is added, in the first Entity field, select the entity that you have enabled for MDM. In the second Entity field, enter a unique name for the entity.

  15. Select the entity row, and then click Modify target mapping. In the Map staging to target form, verify that staging-to-target mapping is correct. Make any corrections that are required, and then click Save. When you have finished, click Close.

  16. Click Validate to validate the new entity.

  17. When validation is completed, click Close.

  18. In Master data management, click Publish entities to SQL Master Data Services. In the Publish entities to SQL Master Data Services form, select the entity that you enabled, and then click Create schema to publish the entity. When the schema has been created, click Close.

Add a Custom Entity to MDM

To create a custom entity and add it to MDM, follow these steps.

  1. Create a custom Data Import/Export Framework entity for the table that contains the data to manage. For instructions, see the section of Create a custom target entity for the Data Import/Export Framework that describe how to add an entity by using the data import/export wizard. When the wizard is completed, you are prompted one or more times to add a field to the current table, based on the EDT relation. Click Yes for each prompt.

  2. In the Project form that opens for the new entity, add a change tracking query for the entity:

    1. Right-click the Queries folder, click New, and then click Query.

    2. Right-click the new query, and then click Rename.

    3. Rename the query Mdm<staging_table_name>CTQuery.

  3. Open a development workspace, and locate the change tracking query in the Queries node. Add the tables that the entity is based on as the data source for the change tracking query. You must add all the tables that the entity is based on as data sources for the query and create relationships between them. This allows MDM to monitor all of the related tables for changes. For instructions, see How to: Create Queries by using the AOT.

    Note

    DMFCustomerEntityCTQuery is a good example of query based on multiple related tables.

  4. In the Project form for the new entity, expand the DataDictionary folder, expand DMFEntity, and then expand the Methods folder. Double-click the DefaultEntityEx method to open it in a development workspace.

  5. In the switch statement in the DefaultEntityEx method, locate the case statement that corresponds to the entity. This case statement is named case DMFEntityType::<entity table name>:. After the this.EntityTable = tableStr(<entity name>); line, add the line this.Mdm = NoYes::Yes;. This line makes the new entity visible in MDM forms. The code should resemble the following example.

    case DMFEntityType::Test:
    this.TargetEntity = queryStr(DMFTestTargetEntity);
    this.EntityClass  = classStr(DMFTestEntityClass);
    this.EntityTable  = tableStr(DMFTestEntity);
    this.Mdm = NoYes::Yes;
    isfound = true;
    break;
    
  6. Click Compile, and then click Save.

  7. In the Project form for the new entity, expand the DataDictionary folder, expand the staging table that has the same name as the entity, and then expand the Fields folder. Identify the natural key field for this table. Right-click the field, and then click Properties. The development workspace that opens displays the properties of the field. Record the values for the Type and StringSize properties.

  8. In the Project form for the new entity, create a key field in the staging table that MDM will use. Expand the DataDictionary folder, expand the staging table, right-click Fields, click New, and then click the data type that matches the value of the Type property for the natural key.

  9. Right-click the new field, and then click Properties. The development workspace that displays the properties of the field. Rename the field AxMdmCode, and modify other properties as required, so that the field matches the natural key field. For example, modify the StringSize property.

  10. In the Project form, expand the DataDictionary folder, and then expand the staging table. Right-click the Methods folder, click Override method, and then click insert. Modify the insert method by adding the following line before the super(); line.

    this.AxMdmCode = this.<staging table natural key field>;

    MDM uses this field for change tracking. If a conflict occurs, MDM replaces the value of this field in the secondary record with a GUID, but the natural key remains the same. The primary record still has the natural key value in this field. Therefore, you can see that two records are the same, because they have the same natural key. However, you can also see that the fields are in conflict, because the AxMdmcode values do not match. The following example shows a natural key field that is named AccountKey.

    public void Insert()
    {
    this.AxMdmCode = this.AccountKey;
    super();
    }
    
  11. Click Compile, and then click Save.

  12. In Microsoft Dynamics AX, open Data import export framework.

  13. In Setup, click Target entities.

  14. In the Target entities form, click New. In the row that is added, in the first Entity field, select the entity that you created. In the second Entity field, enter a unique name for the entity.

  15. Select the entity row, and then click Modify target mapping. In the Map staging to target form, verify that staging-to-target mapping is correct. Make any corrections that are required, and then click Save. When you have finished, click Close.

  16. Click Validate to validate the new entity.

  17. When validation is completed, click Close.

  18. In Master data management, click Publish entities to SQL Master Data Services. In the Publish entities to SQL Master Data Services form, select the entity that you created, and then click Create schema to publish the entity. When the schema has been created, click Close.