How to configure Exchange Server on-premises to use Hybrid Modern Authentication
This article applies to both Microsoft 365 Enterprise and Office 365 Enterprise.
Hybrid Modern Authentication (HMA) is a method of identity management that offers more secure user authentication and authorization, and is available for Exchange server on-premises hybrid deployments.
Definitions
Before we begin, you should be familiar with some definitions:
Hybrid Modern Authentication > HMA
Exchange on-premises > EXCH
Exchange Online > EXO
Also, if a graphic in this article has an object that's 'grayed-out' or 'dimmed' that means the element shown in gray isn't included in HMA-specific configuration.
Enabling Hybrid Modern Authentication
Turning on HMA requires that your environment meets the following:
Make sure you meet the prerequisites before you begin.
Since many prerequisites are common for both Skype for Business and Exchange, review them in Hybrid Modern Authentication overview and prerequisites for using it with on-premises Skype for Business and Exchange servers. Do this before you begin any of the steps in this article. Requirements about linked mailboxes to be inserted.
Add on-premises web service URLs as Service Principal Names (SPNs) in Microsoft Entra ID. In case EXCH is in hybrid with multiple tenants, these on-premises web service URLs must be added as SPNs in the Microsoft Entra ID of all the tenants, which are in hybrid with EXCH.
Ensure all Virtual Directories are enabled for HMA
Check for the EvoSTS Auth Server object
Enable HMA in EXCH.
Note
Does your version of Office support MA? See How modern authentication works for Office 2013 and Office 2016 client apps.
Note
Outlook Web App and Exchange Control Panel do not work with hybrid Modern Authentication. In addition, publishing Outlook Web App and Exchange Control Panel through Microsoft Entra application proxy is unsupported.
Add on-premises web service URLs as SPNs in Microsoft Entra ID
Run the commands that assign your on-premises web service URLs as Microsoft Entra SPNs. SPNs are used by client machines and devices during authentication and authorization. All the URLs that might be used to connect from on-premises to Microsoft Entra ID must be registered in Microsoft Entra ID (including both internal and external namespaces).
First, run the following commands on your Microsoft Exchange Server:
Get-MapiVirtualDirectory | FL server,*url* Get-WebServicesVirtualDirectory | FL server,*url* Get-ClientAccessServer | fl Name, AutodiscoverServiceInternalUri Get-OABVirtualDirectory | FL server,*url* Get-AutodiscoverVirtualDirectory | FL server,*url* Get-OutlookAnywhere | FL server,*hostname*
Ensure the URLs clients might connect to are listed as HTTPS service principal names in Microsoft Entra ID. In case EXCH is in hybrid with multiple tenants, these HTTPS SPNs should be added in the Microsoft Entra ID of all the tenants in hybrid with EXCH.
Next, connect to Microsoft Entra ID with these instructions. To consent to the required permissions, run the following command:
Connect-MgGraph -Scopes Application.Read.All, Application.ReadWrite.All
For your Exchange-related URLs, type the following command:
Get-MgServicePrincipal -Filter "AppId eq '00000002-0000-0ff1-ce00-000000000000'" | select -ExpandProperty ServicePrincipalNames
Take note of (and screenshot for later comparison) the output of this command, which should include an
https://*autodiscover.yourdomain.com*
andhttps://*mail.yourdomain.com*
URL, but mostly consist of SPNs that begin with00000002-0000-0ff1-ce00-000000000000/
. If there arehttps://
URLs from your on-premises that are missing, those specific records should be added to this list.If you don't see your internal and external MAPI/HTTP, EWS, ActiveSync, OAB, and Autodiscover records in this list, you must add them using the following command (the example URLs are
mail.corp.contoso.com
andowa.contoso.com
, but you should replace the example URLs with your own):$x= Get-MgServicePrincipal -Filter "AppId eq '00000002-0000-0ff1-ce00-000000000000'" $ServicePrincipalUpdate =@( "https://mail.corp.contoso.com/","https://owa.contoso.com/" ) Update-MgServicePrincipal -ServicePrincipalId $x.Id -ServicePrincipalNames $ServicePrincipalUpdate
Verify your new records were added by running the
Get-MsolServicePrincipal
command from step 2 again, and looking through the output. Compare the list / screenshot from before to the new list of SPNs. You might also take a screenshot of the new list for your records. If you are successful, you'll see the two new URLs in the list. Going by our example, the list of SPNs now includes the specific URLshttps://mail.corp.contoso.com
andhttps://owa.contoso.com
.
Verify Virtual Directories are Properly Configured
Now verify OAuth is properly enabled in Exchange on all of the Virtual Directories Outlook might use by running the following commands:
Get-MapiVirtualDirectory | FL server,*url*,*auth*
Get-WebServicesVirtualDirectory | FL server,*url*,*oauth*
Get-OABVirtualDirectory | FL server,*url*,*oauth*
Get-AutoDiscoverVirtualDirectory | FL server,*oauth*
Check the output to make sure OAuth is enabled on each of these VDirs, it looks something like this (and the key thing to look at is 'OAuth'):
Get-MapiVirtualDirectory | fl server,*url*,*auth*
Server : EX1
InternalUrl : https://mail.contoso.com/mapi
ExternalUrl : https://mail.contoso.com/mapi
IISAuthenticationMethods : {Ntlm, OAuth, Negotiate}
InternalAuthenticationMethods : {Ntlm, OAuth, Negotiate}
ExternalAuthenticationMethods : {Ntlm, OAuth, Negotiate}
If OAuth is missing from any server and any of the four virtual directories, you need to add it by using the relevant commands before proceeding (Set-MapiVirtualDirectory, Set-WebServicesVirtualDirectory, Set-OABVirtualDirectory, and Set-AutodiscoverVirtualDirectory).
Confirm the EvoSTS Auth Server Object is Present
Return to the on-premises Exchange Management Shell for this last command. Now you can validate that your on-premises has an entry for the evoSTS authentication provider:
Get-AuthServer | where {$_.Name -like "EvoSts*"} | ft name,enabled
Your output should show an AuthServer of the Name EvoSts with a GUID and the 'Enabled' state should be True. If not, you should download and run the most recent version of the Hybrid Configuration Wizard.
Note
In case EXCH is in hybrid with multiple tenants, your output should show one AuthServer of the Name EvoSts - {GUID}
for each tenant in hybrid with EXCH and the Enabled state should be True for all of these AuthServer objects.
Important
If you're running Exchange 2010 in your environment, the EvoSTS authentication provider won't be created.
Enable HMA
Run the following command in the Exchange Management Shell, on-premises, replacing <GUID> in the command line with the GUID from the output of the last command you ran:
Set-AuthServer -Identity "EvoSTS - <GUID>" -IsDefaultAuthorizationEndpoint $true
Set-OrganizationConfig -OAuth2ClientProfileEnabled $true
Note
In older versions of the Hybrid Configuration Wizard the EvoSts AuthServer was simply named EvoSTS without a GUID attached. There is no action you need to take, just modify the preceding command line to reflect this by removing the GUID portion of the command:
Set-AuthServer -Identity EvoSTS -IsDefaultAuthorizationEndpoint $true
If the EXCH version is Exchange 2016 (CU18 or higher) or Exchange 2019 (CU7 or higher) and hybrid was configured with HCW downloaded after September 2020, run the following command in the Exchange Management Shell, on-premises:
Set-AuthServer -Identity "EvoSTS - {GUID}" -DomainName "Tenant Domain" -IsDefaultAuthorizationEndpoint $true
Set-OrganizationConfig -OAuth2ClientProfileEnabled $true
Note
In case EXCH is in hybrid with multiple tenants, there are multiple AuthServer objects present in EXCH with domains corresponding to each tenant. The IsDefaultAuthorizationEndpoint flag should be set to true (using the IsDefaultAuthorizationEndpoint cmdlet) for any one of these AuthServer objects. This flag can't be set to true for all the Authserver objects and HMA would be enabled even if one of these AuthServer object's IsDefaultAuthorizationEndpoint flag is set to true.
Note
For the DomainName parameter, use the tenant domain value, which is usually in the form contoso.onmicrosoft.com
.
Verify
Once you enable HMA, a client's next sign in will use the new auth flow. Just turning on HMA won't trigger a reauthentication for any client, and it might take a while for Exchange to pick up the new settings.
You should also hold down the CTRL key at the same time you right-click the icon for the Outlook client (also in the Windows Notifications tray) and select Connection Status. Look for the client's SMTP address against an Authn type of Bearer\*
, which represents the bearer token used in OAuth.
Note
Need to configure Skype for Business with HMA? You'll need two articles: One that lists supported topologies, and one that shows you how to do the configuration.
Using hybrid Modern Authentication with Outlook for iOS and Android
If you're an on-premises customer using Exchange server on TCP 443, allow network traffic from the following IP ranges:
52.125.128.0/20
52.127.96.0/23
These IP address ranges are also documented in Additional endpoints not included in the Office 365 IP Address and URL Web service.
Related articles
Feedback
https://aka.ms/ContentUserFeedback.
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see:Submit and view feedback for