2.3.4.20 EmfPlusFillRects Record

The EmfPlusFillRects record specifies filling the interiors of a series of rectangles.

0	1	2	3	4	5	6	7	8	9	1 0	1	2	3	4	5	6	7	8	9	2 0	1	2	3	4	5	6	7	8	9	3 0	1
Type																Flags
Size
DataSize
BrushId
Count
RectData (variable)
...

Type (2 bytes): An unsigned integer that identifies this record type as EmfPlusFillRects from the RecordType enumeration. The value MUST be set to 0x400A

Flags (2 bytes): An unsigned integer that provides information about how the operation is to be performed, and about the structure of the record.

0	1	2	3	4	5	6	7	8	9	1 0	1	2	3	4	5	6	7	8	9	2 0	1	2	3	4	5	6	7	8	9	3 0	1
S	C	X	X	X	X	X	X	X	X	X	X	X	X	X	X

S (1 bit): This bit specifies the type of data in the BrushId field.

If set, BrushId specifies a color as an EmfPlusARGB object. If clear, BrushId contains the index of an EmfPlusBrush object in the EMF+ Object Table.

C (1 bit): This bit indicates whether the data in the RectData field is compressed.

If set, RectData contains an EmfPlusRect object. If clear, RectData contains an EmfPlusRectF object.

X (1 bit): Reserved and MUST be ignored.

Size (4 bytes): An unsigned integer that specifies the 32-bit-aligned number of bytes in the entire record, including the 12-byte record header and record-specific data.

At least 1 RectData array element MUST be specified in this record.

Value	Meaning
0x0000001C ≤ value	If the C bit is set in the Flags field, Size MUST be computed as follows: Size = (Count * 0x00000008) + 0x00000014
0x00000024 ≤ value	If the C bit is clear in the Flags field, Size MUST be computed as follows: Size = (Count * 0x00000010) + 0x00000014

DataSize (4 bytes): An unsigned integer that specifies the 32-bit-aligned number of bytes of record-specific data that follows.

At least 1 RectData array element MUST be specified in this record.

Value	Meaning
0x00000010 ≤ value	If the C bit is set in the Flags field, DataSize MUST be computed as follows:  DataSize = (Count * 0x00000008) + 0x00000008
0x00000018 ≤ value	If the C bit is clear in the Flags field, DataSize MUST be computed as follows:  DataSize = (Count * 0x00000010) + 0x00000008

BrushId (4 bytes): An unsigned integer that defines the brush, the content of which is determined by the S bit in the Flags field.

Count (4 bytes): An unsigned integer that specifies the number of rectangles in the RectData field.

RectData (variable): An array of either an EmfPlusRect or EmfPlusRectF objects of Count length that defines the rectangle data.

See section 2.3.4 for the specification of additional drawing record types.