Add-DhcpServerv4Scope
Adds an IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server service.
Syntax
Add-DhcpServerv4Scope
[-ComputerName <String>]
[-StartRange] <IPAddress>
[-EndRange] <IPAddress>
[-Name] <String>
[-Description <String>]
[-State <String>]
[-SuperscopeName <String>]
[-MaxBootpClients <UInt32>]
[-ActivatePolicies <Boolean>]
[-PassThru]
[-NapEnable]
[-NapProfile <String>]
[-Delay <UInt16>]
[-LeaseDuration <TimeSpan>]
[-SubnetMask] <IPAddress>
[-Type <String>]
[-CimSession <CimSession[]>]
[-ThrottleLimit <Int32>]
[-AsJob]
[-WhatIf]
[-Confirm]
[<CommonParameters>]
Description
The Add-DhcpServerv4Scope cmdlet adds an IPv4 scope on the Dynamic Host Configuration Protocol (DHCP) server service with the specified parameters.
Examples
EXAMPLE 1
PS C:\>Add-DhcpServerv4Scope -Name "Lab-4 Network" -StartRange 10.10.10.1 -EndRange 10.10.10.254 -SubnetMask 255.255.255.0
This example adds a new scope for 10.10.10.0/24 subnet on the DHCP server service running on the local computer.
EXAMPLE 2
PS C:\>Add-DhcpServerv4Scope -ComputerName dhcpserver.contoso.com -Name "Lab-5 Network" -StartRange 20.20.20.1 -EndRange 20.20.20.254 -SubnetMask 255.255.255.0 -State InActive -NapEnable
This example adds the specified inactive scope for 20.20.20.0/24 subnet on the DHCP server service. The scope is enabled for NAP.
EXAMPLE 3
PS C:\>Add-DhcpServerv4Scope -Name "Lab-6 Network" -StartRange 30.30.30.1 -EndRange 30.30.30.254 -SubnetMask 255.255.255.0 -SuperScope "Expanded Lab-6 Network"
This example adds a new scope for 30.30.30.0/24 subnet on the DHCP server service running on the local computer. The scope is added as part of the superscope named Expanded Lab-6 Network.
Parameters
-ActivatePolicies
Specifies the enabled state of the policy enforcement on the scope being added.
Type: | Boolean |
Position: | Named |
Default value: | True |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-AsJob
ps_cimcommon_asjob
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
Type: | CimSession[] |
Aliases: | Session |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-ComputerName
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.
Type: | String |
Aliases: | Cn |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
Type: | SwitchParameter |
Aliases: | cf |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Delay
Specifies the number of milliseconds by which the DHCP server service should wait before responding to the client requests. This parameter should be configured if the scope is part of a split scope deployment and this DHCP server service should act as a secondary DHCP server service for the scope being added.
Type: | UInt16 |
Position: | Named |
Default value: | 0 |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-Description
Specifies the description string for the IPv4 scope being added.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-EndRange
Specifies the ending IP address of the range within the subnet from which IP addresses should be leased by the DHCP server service.
Type: | IPAddress |
Position: | 2 |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-LeaseDuration
Specifies the time interval for which an IP address should be leased to a client in this scope.
This should be specified in the format day.hrs:mins:secs
.
Type: | TimeSpan |
Position: | Named |
Default value: | 8.00:00:00 |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-MaxBootpClients
Specifies, if the scope type is specified as Both to allow for both DHCP and BootP clients, the maximum number of BootP clients which should be leased an IP address from this scope.
Type: | UInt32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-Name
Specifies the name of the IPv4 scope being added.
Type: | String |
Position: | 4 |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-NapEnable
Specifies the enabled state of Network Access Protection (NAP) for this scope. If NAP is enabled, then the DHCP server service passes the statement of health (SoH) received from the client to the network policy server (NPS). Based on the NAP profile set, the NPS determines the network access to be granted to the client.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-NapProfile
Specifies that the NAP profile should be set only if NAP is enabled on the scope. The NAP profile refers to the MS Service Class which is a condition used in network policies on NPS.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-StartRange
Specifies the starting IP address of the range within the subnet from which IP addresses should be leased by the DHCP server service.
Type: | IPAddress |
Position: | 1 |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-State
Specifies the state of the scope when created. The acceptable values for this parameter are: Active or Inactive. Only an active scope will respond to client requests. The default value is Active.
Type: | String |
Accepted values: | Active, InActive |
Position: | Named |
Default value: | Active |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-SubnetMask
Specifies the subnet mask for the scope specified in IP address format.
For example: 255.255.255.0
.
Type: | IPAddress |
Position: | 3 |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-SuperscopeName
Specifies the name of the superscope to which the scope will be added.
Type: | String |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-Type
Specifies the type of clients to be serviced by the scope. The acceptable values for this parameter are: DHCP, BootP, or Both. The type of the scope determines if the DHCP server service responds to only DHCP client requests, only BootP client requests, or Both types of clients.
Type: | String |
Accepted values: | Dhcp, Bootp, Both |
Position: | Named |
Default value: | DHCP |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Type: | SwitchParameter |
Aliases: | wi |
Position: | Named |
Default value: | False |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Inputs
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Outputs
The Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.