Edit

Share via

Set-DhcpServerv6OptionValue

  • Reference
Module:
DhcpServer

Sets an IPv6 option value at the server, scope, or reservation level.

Syntax

Set-DhcpServerv6OptionValue
   [-PassThru]
   [-Force]
   [[-Prefix] <IPAddress>]
   [-UserClass <String>]
   [-ComputerName <String>]
   [-ReservedIP <IPAddress>]
   [-Value] <String[]>
   [-OptionId] <UInt32>
   [-VendorClass <String>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]
Set-DhcpServerv6OptionValue
   [-PassThru]
   [-Force]
   [[-Prefix] <IPAddress>]
   [-UserClass <String>]
   [-DnsServer <IPAddress[]>]
   [-DomainSearchList <String[]>]
   [-InfoRefreshTime <UInt32>]
   [-ComputerName <String>]
   [-ReservedIP <IPAddress>]
   [-CimSession <CimSession[]>]
   [-ThrottleLimit <Int32>]
   [-AsJob]
   [-WhatIf]
   [-Confirm]
   [<CommonParameters>]

Description

The Set-DhcpServerv6OptionValue cmdlet sets an IPv6 option value at the server, scope, or reservation level. The definition for the option must already exist on the Dynamic Host Configuration Protocol (DHCP) server service. If the ReservedIP parameter is specified, then the option values are set at the reservation level. If only the Prefix parameter is specified, then the option values are set at the scope level. If neither the Prefix nor ReservedIP parameter is specified, then the option values are set at the server level. The Prefix and ReservedIP parameters cannot both be specified.

If the VendorClass parameter is specified, then this cmdlet sets the option value for the specified vendor class. If the UserClass parameter is specified, then this cmdlet sets the option value for the specified user class.

Examples

EXAMPLE 1

PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -DnsServer 2001:4898:7020:1020::2 -DomainSearchList contoso.com

This example sets the DHCPv6 server level option values for DNS server and domain search list options.

EXAMPLE 2

PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -DnsServer 2001:4898:7020:1020::2 -DomainSearchList contoso.com

This example sets the DHCPv6 option values for DNS server and domain search list options on the scope 2001:4898:7020:1020::.

EXAMPLE 3

PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -OptionId 23 -Value 2001:4898:7020:1020::2

This example sets server-wide DHCPv6 option value for option ID 23, or the DNS server.

EXAMPLE 4

PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -OptionId 23 -Value 2001:4898:7020:1020::2

This example sets the DHCPv6 option value for option ID 23, or the DNS server, for the specified DHCPv6 scope.

EXAMPLE 5

PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -ReservedIP 2001:4898:7020:1020::5 -OptionId 23 -Value 2001:4898:7020:1020::2

This example sets the DHCPv6 option value for option ID 23, or the DNS server, for the specified reservation.

EXAMPLE 6

PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -VendorClass MSUCClient -OptionId 5 -Value 6874747073

This example sets the vendor-class-specific DHCPv6 option value configured on the specified scope for the specified vendor class named MSUCClient.

EXAMPLE 7

PS C:\>Set-DhcpServerv6OptionValue -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -UserClass LabComputer -OptionId 23 -Value 2001:4898:7020:1020::20

This example sets the user-class-specific DHCPv6 option value for option ID 23, or the DNS server, on the specified scope for the specified user class.

Parameters

-AsJob

ps_cimcommon_asjob

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-CimSession

Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.

Type:CimSession[]
Aliases:Session
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-ComputerName

Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the DHCP server service.

Type:String
Aliases:Cn
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Confirm

Prompts you for confirmation before running the cmdlet.

Type:SwitchParameter
Aliases:cf
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-DnsServer

Specifies one or more values for the DNS server option.

Type:IPAddress[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-DomainSearchList

Specifies one or more values for the domain search list option.

Type:String[]
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Force

Specifies that the DNS server validation should not be performed. This parameter is applicable only if the DNSServer parameter or option ID 23 is specified.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-InfoRefreshTime

Specifies the value for the information refresh option. This parameter value specifies an upper bound for how long a client should wait before refreshing information retrieved from DHCPv6 server. This parameter is used with stateless DHCPv6 as there are no addresses or other entities with lifetimes that can tell the client when to contact the DHCPv6 server to refresh its configuration.

Type:UInt32
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-OptionId

Specifies the numeric identifier (ID) of the option for which a value is being set.

Type:UInt32
Position:1
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-PassThru

Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.

Type:SwitchParameter
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-Prefix

Specifies the IPv6 subnet prefix of the scope on which the option value is being set.

Type:IPAddress
Position:3
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ReservedIP

Specifies the IPv6 address of the reservation for which the option value is being set.

Type:IPAddress
Aliases:IPAddress
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-ThrottleLimit

Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0 is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.

Type:Int32
Position:Named
Default value:None
Required:False
Accept pipeline input:False
Accept wildcard characters:False

-UserClass

Specifies the option value for the specified user class.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-Value

Specifies the value being set for the option.

Type:String[]
Position:2
Default value:None
Required:True
Accept pipeline input:True
Accept wildcard characters:False

-VendorClass

Specifies the option value for the specified vendor class.

Type:String
Position:Named
Default value:None
Required:False
Accept pipeline input:True
Accept wildcard characters:False

-WhatIf

Shows what would happen if the cmdlet runs. The cmdlet is not run.

Type:SwitchParameter
Aliases:wi
Position:Named
Default value:False
Required:False
Accept pipeline input:False
Accept wildcard characters:False

Inputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.

Outputs

CimInstance

The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.