Set-NetLbfoTeam
Sets parameters on the specified NIC team.
Syntax
Set-NetLbfoTeam
[[-Name] <String[]>]
[-AsJob]
[-CimSession <CimSession[]>]
[-LoadBalancingAlgorithm <LBAlgos>]
[-PassThru]
[-TeamingMode <TeamingModes>]
[-ThrottleLimit <Int32>]
Set-NetLbfoTeam
[-AsJob]
[-CimSession <CimSession[]>]
[-LoadBalancingAlgorithm <LBAlgos>]
[-MemberOfTheTeam <CimInstance>]
[-PassThru]
[-TeamingMode <TeamingModes>]
[-ThrottleLimit <Int32>]
Set-NetLbfoTeam
[-AsJob]
[-CimSession <CimSession[]>]
[-LoadBalancingAlgorithm <LBAlgos>]
[-PassThru]
[-TeamingMode <TeamingModes>]
[-ThrottleLimit <Int32>]
-InputObject <CimInstance[]>
Set-NetLbfoTeam
[-AsJob]
[-CimSession <CimSession[]>]
[-LoadBalancingAlgorithm <LBAlgos>]
[-PassThru]
[-TeamingMode <TeamingModes>]
[-TeamNicForTheTeam <CimInstance>]
[-ThrottleLimit <Int32>]
Description
The Set-NetLbfoTeam cmdlet sets the TeamingMode or LoadBalancingAlgorithm parameters on the specified NIC team.
You need administrator privileges to use Set-NetLbfoTeam.
Examples
Example 1: Set the teaming mode
PS C:\>Set-NetLbfoTeam -Name Team1 -TeamingMode LACP
This command sets the teaming mode of the team named Team1 to LACP.
Example 2: Set the load balancing algorithm
PS C:\>Set-NetLbfoTeam -Name Team1 -LoadBalancingAlgorithm HyperVPorts
This command sets the load balancing algorithm of the team named Team1 to HyperVPorts.
Example 3: Set the teaming mode and load balancing algorithm
PS C:\>Set-NetLbfoTeam -Name Team1 -TeamingMode LACP -LoadBalancingAlgorithm HyperVPorts
This command sets the teaming mode and load balancing algorithm of the team named Team1 at the same time. The teaming mode is set to LACP and the load balancing algorithm is set to HyperVPorts.
Parameters
-AsJob
ps_cimcommon_asjob
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227967 or Get-CimSessionhttp://go.microsoft.com/fwlink/p/?LinkId=227966 cmdlet. The default is the current session on the local computer.
Type: | CimSession[] |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-InputObject
Specifies the object which contains the NIC team parameters to set.
Type: | CimInstance[] |
Position: | Named |
Default value: | None |
Required: | True |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-LoadBalancingAlgorithm
Specifies the load balancing algorithm the NIC team uses to distribute network traffic between the interfaces.
You can specify one of the following four load balancing algorithms:
TransportPorts: Uses the source and destination TCP ports and the IP addresses to create a hash, and then assigns the packets that have the matching hash value to one of the available interfaces.
IPAddresses: Uses the source and destination IP addresses to create a hash, and then assigns the packets that have the matching hash value to one of the available interfaces.
MacAddresses: Uses the source and destination MAC addresses to create a hash and then assigns the packets that have the matching hash value to one of the available interfaces.
HyperVPort: Distributes network traffic based on the source virtual machine Hyper-V switch port identifier.
Type: | LBAlgos |
Aliases: | lba |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-MemberOfTheTeam
Specifies the network adapter name for which to modify the parameters.
Type: | CimInstance |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-Name
Specifies the name of the NIC team to modify.
Type: | String[] |
Position: | 1 |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | True |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Type: | SwitchParameter |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-TeamingMode
Specifies the mode of the NIC teaming. You can specify one of the following three teaming modes:
LACP: Requires configuration on both the switch and the host to identify which links form the team. Uses the Link Aggregation Control Protocol (LACP) to identify links that are connected between the host and a given switch.
Static: Requires configuration on both the switch and the host to identify which links form the team.
SwitchIndependent: Specifies that a network switch configuration is not needed for the NIC team. Because the network switch is not configured to know about the NIC teaming, the team members can be connected to different switches.
Type: | TeamingModes |
Aliases: | tm |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
-TeamNicForTheTeam
Specifies the team interface whose associated NIC team is to be modified.
Type: | CimInstance |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | True |
Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Type: | Int32 |
Position: | Named |
Default value: | None |
Required: | False |
Accept pipeline input: | False |
Accept wildcard characters: | False |
Inputs
None
This cmdlet takes no input objects.
Outputs
MSFT_NetLbfoTeam
By default, this cmdlet produces no output.
If the PassThru parameter is specified, the cmdlet returns the updated MSFT_NetLbfoTeam object.
Related Links
Feedback
https://aka.ms/ContentUserFeedback.
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see:Submit and view feedback for