• Article

Security Bulletin

Microsoft Security Bulletin MS10-031 - Critical

Vulnerability in Microsoft Visual Basic for Applications Could Allow Remote Code Execution (978213)

Published: May 11, 2010 | Updated: May 19, 2010

Version: 1.1

General Information

Executive Summary

This security update resolves a privately reported vulnerability in Microsoft Visual Basic for Applications. The vulnerability could allow remote code execution if a host application opens and passes a specially crafted file to the Visual Basic for Applications runtime. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

This security update is rated Critical for all supported versions of Microsoft Visual Basic for Applications SDK and third-party applications that use Microsoft Visual Basic for Applications. This security update is also rated Important for all supported editions of Microsoft Office XP, Microsoft Office 2003, and the 2007 Microsoft Office System. For more information, see the subsection, Affected and Non-Affected Software, in this section.

The update addresses the vulnerability by modifying the way that Visual Basic for Applications searches for ActiveX Controls embedded in documents. For more information about the vulnerability, see the Frequently Asked Questions (FAQ) subsection for the specific vulnerability entry under the next section, Vulnerability Information.

Recommendation. Microsoft recommends that customers apply the update immediately.

Known Issues. Microsoft Knowledge Base Article 978213 documents the currently known issues that customers may experience when installing this security update. The article also documents recommended solutions for these issues. When currently known issues and recommended solutions pertain only to specific releases of this software, this article provides links to further articles.

Affected and Non-Affected Software

The following software have been tested to determine which versions or editions are affected. Other versions or editions are either past their support life cycle or are not affected. To determine the support life cycle for your software version or edition, visit Microsoft Support Lifecycle.

Microsoft Office

Office Suite and Other Software Maximum Security Impact Aggregate Severity Rating Bulletins Replaced by this Update
Microsoft Office XP Service Pack 3[1] \ (KB976380) Remote Code Execution Important MS08-013
Microsoft Office 2003 Service Pack 3[1] \ (KB976382) Remote Code Execution Important MS08-013
2007 Microsoft Office System Service Pack 1 and 2007 Microsoft Office System Service Pack 2[1] \ (KB976321) Remote Code Execution Important None

[1]These updates for Microsoft Office apply to all supported Microsoft Office suites and other Microsoft Office software that contain the vulnerable shared Office component. These include, but are not limited to, supported versions of Microsoft Office Visio and Microsoft Office Project. For more information, see the next section, Frequently Asked Questions (FAQ) Related to This Security Update.

Developer Tools

Software Maximum Security Impact Aggregate Severity Rating Bulletins Replaced by this Update
Microsoft Visual Basic for Applications[1]\ (KB974945) Remote Code Execution Critical MS06-047
Microsoft Visual Basic for Applications SDK[2][3] Remote Code Execution Critical MS06-047

[1]This update package applies to supported versions of the Microsoft Visual Basic for Applications runtime (Vbe6.dll) and is available from the Microsoft Download Center only.

[2]The supported versions of the VBA SDK are Microsoft Visual Basic for Applications SDK 6.3, Microsoft Visual Basic for Applications SDK 6.4, and Microsoft Visual Basic for Applications SDK 6.5.

[3]The updated version of the Visual Basic for Applications SDK that addresses the vulnerability described in this bulletin is available for independent software vendors (ISVs) from the Summit Software Company. For more information, see the next section, Frequently Asked Questions (FAQ) Related to This Security Update.

Non-Affected Software

Office and Other Software
Microsoft Office 2010 (32-bit editions) and Microsoft Office 2010 (64-bit editions)
Microsoft Office 2004 for Mac
Microsoft Office 2008 for Mac
Open XML File Format Converter for Mac
Microsoft Office Excel Viewer Service Pack 1 and Microsoft Office Excel Viewer Service Pack 2
Microsoft Office Word Viewer Service Pack 1 and Microsoft Office Word Viewer Service Pack 2
Microsoft Office PowerPoint Viewer 2007 Service Pack 1 and Microsoft Office PowerPoint Viewer 2007 Service Pack 2
Microsoft Office Visio Viewer 2007 Service Pack 1 and Microsoft Office Visio Viewer 2007 Service Pack 2
Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats Service Pack 1 and Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats Service Pack 2

Why was this bulletin revised on May 19, 2010? 
Microsoft revised this bulletin to more clearly state that the updates for Microsoft Office apply to all supported Microsoft Office suites and other Microsoft Office software that contain a vulnerable version of VBE6.dll. This includes, but is not limited to, supported versions of Microsoft Office Visio and Microsoft Office Project. This also includes Office software that includes VBE6.dll but does not access the vulnerable code such as supported versions of Microsoft Office Outlook and Microsoft Office OneNote.

This is a bulletin-only change. There were no changes to the detection logic or the update files. Customers who have already successfully updated their systems, including customers with automatic updating enabled, do not need to take any action. Customers who have not installed this update previously may need to reassess whether their systems require this update based on the Affected Software table as revised and information provided in this Update FAQ.

The update is to a shared component used by Microsoft Office. Will the update be offered to Microsoft Office software that includes the shared component, even if the software does not access the vulnerable code? 
Yes, the update will be offered to systems where the vulnerable shared Office component is detected. This is true even for cases where the Office software includes VBE6.dll but does not access the vulnerable code. Consult the following table for examples of Office software that this update applies to.

Microsoft Office Is VBE6.dll included with this software? Does the software access the vulnerable code?
Microsoft Office XP, Microsoft Office 2003, 2007 Microsoft Office System Yes Yes, components such as Word, Excel, and PowerPoint
Microsoft Office OneNote 2003, Microsoft Office OneNote 2007 Yes No
Microsoft Office Outlook 2003, Microsoft Office Outlook 2007 Yes No
Microsoft Office Project 2002, Microsoft Office Project 2003, Microsoft Office Project 2007 Yes Yes
Microsoft Office Visio 2002, Microsoft Office Visio 2003, Microsoft Office Visio 2007 Yes Yes

Note Use this table as a guideline only. It includes a sample of the most commonly asked-about software.

In cases where the update is offered, Microsoft recommends that customers install the update regardless of whether or not the software accesses the vulnerable code. Installing the update will help to ensure customers are running the most up-to-date version of the VBE6.dll used by Microsoft Office software.

Does the offer to update a non-vulnerable version of software constitute an issue in the Microsoft update mechanism? 
No, the update mechanism is functioning correctly in that it detects a lower version of the files on the system than in the update package and thus, offers the update.

Where are the file information details? 
Refer to the reference tables in the Security Update Deployment section for the location of the file information details.

I have applied the required Microsoft security updates, but I still have an affected version of the Visual Basic for Applications runtime (VBE6.dll) on my system. How do I update this DLL? 
There are cases where your system might still have an affected version of VBE6.dll even after you have installed the required security updates for Microsoft Office and the update for Microsoft Visual Basic for Applications listed in this bulletin.

If VBE6.dll was installed on your system by a supported version of Microsoft Office, then applying the security update for the affected version of Microsoft Office will replace VBE6.dll with the updated version that addresses the vulnerability described in this bulletin. However, if VBE6.dll was installed on your system by a third-party application, you may have to install an update for that program.

To update VBE6.dll for third-party applications there are two possible scenarios depending on the third-party application's implementation of VBA. If you know that the third-party application is compliant to the recommended best practices for using a shared component as a side-by-side assembly, then applying the Microsoft Visual Basic for Applications (KB974945) update will replace VBE6.dll in the shared location with the updated version that addresses the vulnerability described in this bulletin.

On the other hand, if the third-party application does not place VBE6.dll in the shared location as per recommended best practices, then you should contact the third-party application developer and ask them to provide you with an updated version of their application that contains a newer version of the VBE6.dll that addresses the vulnerability described in this bulletin. Note that not every third-party application that installs VBE6.dll is vulnerable to the vulnerability described in this bulletin because the application might not use VBE6.dll to search for ActiveX controls in a way that is exploitable. However, only the developer of that application can make that determination.

This security update only applies to Microsoft software. How can I detect if third-party applications have deployed an affected version of the Visual Basic for Applications runtime (VBE6.dll) on my system? 
Third-party applications that support VBA could deploy VBE6.dll in a location that is not updated by this security update. In the case that you do have a third-party application that has shipped with its own copy of VBE6.dll, to help ensure that your system is fully protected from the vulnerability described in this bulletin, you should contact the developer or vendor responsible for support for the third-party application directly.

For details on how to scan for copies of VBE6.dll on your system, see Microsoft Knowledge Base Article 978213. Scanning for all copies of VBE6.dll on your system can assist in identifying potentially vulnerable copies that may have been installed by third-party applications.

I am a third-party application developer and I use Microsoft Visual Basic for Applications runtime in my application. Is my application vulnerable and how do I update it? 
Developers who redistribute the Microsoft Visual Basic for Applications runtime VBE6.dll should ensure that they update the version of the Microsoft Visual Basic for Applications runtime installed with their application by downloading an updated version of the Microsoft Visual Basic for Applications SDK from the Summit Software Company. For more information on best practices on redistributed component use, please see Microsoft Knowledge Base Article 835322 and the MSDN article, Isolated Applications and Side-by-side Assemblies.

I am an ISV. Where is the update for Microsoft Visual Basic for Applications SDK? 
The update is available from the Summit Software Company. Summit Software Company is a global supplier of application customization software products and integration support services to independent software vendors (ISVs) and corporate developers. In June 1996, Summit Software entered into an agreement with Microsoft to sell Microsoft Visual Basic for Applications and related value-added technology and services. Summit continues to sell and support Microsoft VBA.

Why is this update Critical for Microsoft Visual Basic for Applications but only Important for Microsoft Office? 
Microsoft Office XP and later versions have a built-in feature that prompts a user to Open, Save, or Cancel before opening a document. This mitigating factor reduces the vulnerability from Critical to Important because the vulnerability requires more than a single user action to complete the exploit.

I use Microsoft Office 2007 Service Pack 1. Are any additional security features included in this update? 
Yes, as part of the servicing model for Microsoft Office 2007, when users of Microsoft Office 2007 Service Pack 1 install this update, their systems will be upgraded to security functionality that was initially released with Microsoft Office 2007 Service Pack 2. All updates released after April 24, 2009 for Microsoft Office 2007 will include these security features, which were introduced in Microsoft Office 2007 Service Pack 2. We have thoroughly tested this update, but as with all updates, we recommend that users perform testing appropriate to the environment and configuration of their systems.

I am using an older release of the software discussed in this security bulletin. What should I do? 
The affected software listed in this bulletin have been tested to determine which releases are affected. Other releases are past their support life cycle. For more information about the product lifecycle, visit the Microsoft Support Lifecycle Web site.

It should be a priority for customers who have older releases of the software to migrate to supported releases to prevent potential exposure to vulnerabilities. To determine the support lifecycle for your software release, see Select a Product for Lifecycle Information. For more information about service packs for these software releases, see Lifecycle Supported Service Packs.

Customers who require custom support for older software must contact their Microsoft account team representative, their Technical Account Manager, or the appropriate Microsoft partner representative for custom support options. Customers without an Alliance, Premier, or Authorized Contract can contact their local Microsoft sales office. For contact information, visit the Microsoft Worldwide Information Web site, select the country in the Contact Information list, and then click Go to see a list of telephone numbers. When you call, ask to speak with the local Premier Support sales manager. For more information, see the Microsoft Support Lifecycle Policy FAQ.

Vulnerability Information

Severity Ratings and Vulnerability Identifiers

The following severity ratings assume the potential maximum impact of the vulnerability. For information regarding the likelihood, within 30 days of this security bulletin's release, of the exploitability of the vulnerability in relation to its severity rating and security impact, please see the Exploitability Index in the May bulletin summary. For more information, see Microsoft Exploitability Index.

Affected Software VBE6.dll Stack Memory Corruption Vulnerability - CVE-2010-0815 Aggregate Severity Rating
Office Suite
Microsoft Office XP Service Pack 3 Important  Remote Code Execution Important
Microsoft Office 2003 Service Pack 3 Important  Remote Code Execution Important
2007 Microsoft Office System Service Pack 1 and 2007 Microsoft Office System Service Pack 2 Important  Remote Code Execution Important
Developer Tools
Microsoft Visual Basic for Applications[1] Critical  Remote Code Execution Critical
Microsoft Visual Basic for Applications SDK[2] Critical  Remote Code Execution Critical

[1]This update package applies to supported versions of the Microsoft Visual Basic for Applications runtime (Vbe6.dll) and is available from the Microsoft Download Center only.

[2]The supported versions of the VBA SDK are Microsoft Visual Basic for Applications SDK 6.3, Microsoft Visual Basic for Applications SDK 6.4, and Microsoft Visual Basic for Applications SDK 6.5.

VBE6.dll Stack Memory Corruption Vulnerability - CVE-2010-0815

A remote code execution vulnerability exists in the way that Microsoft Visual Basic for Applications searches for ActiveX controls. This vulnerability could allow remote code execution if a host application opens and passes a specially crafted file to the Visual Basic for Applications runtime. If a user is logged on with administrative user rights, an attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

To view this vulnerability as a standard entry in the Common Vulnerabilities and Exposures list, see CVE-2010-0815.

Mitigating Factors for VBE6.dll Stack Memory Corruption Vulnerability - CVE-2010-0815

Mitigation refers to a setting, common configuration, or general best-practice, existing in a default state, that could reduce the severity of exploitation of a vulnerability. The following mitigating factors may be helpful in your situation:

  • By default, the 2007 Microsoft Office System prompts a user with a security warning before activating an embedded ActiveX control in an Office document. Users who choose to not enable the control are protected by this default setting. For more information, see the Microsoft Office Online article, Enable or disable ActiveX controls in Office documents.
  • An attacker who successfully exploited this vulnerability could gain the same user rights as the local user. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.
  • In a Web-based attack scenario, an attacker could host a Web site that contains a Web page that is used to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content or advertisements could contain specially crafted content that could exploit this vulnerability. In all cases, however, an attacker would have no way to force users to visit these Web sites. Instead, an attacker would have to convince users to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes users to the attacker's Web site, and then convince them to open the specially crafted Office file.
  • The vulnerability cannot be exploited automatically through e-mail. For an attack to be successful, a user must open an attachment that is sent in an e-mail message.

Workarounds for VBE6.dll Stack Memory Corruption Vulnerability - CVE-2010-0815

Workaround refers to a setting or configuration change that does not correct the underlying vulnerability but would help block known attack vectors before you apply the update. Microsoft has tested the following workarounds and states in the discussion whether a workaround reduces functionality:

  • Disable ActiveX controls in the 2007 Microsoft Office System

    You can disable ActiveX controls in the 2007 Microsoft Office System using the TrustCenter. Refer to the instructions for how to "Disable all controls without notification" in the Microsoft Office Online article, Enable or disable ActiveX controls in Office documents.

    Impact of workaround. Embedded ActiveX controls (such as macros) will not run in Office documents.

  • Restrict access to VBE6.dll

    For Microsoft Windows 2000, Windows XP, and Windows Server 2003, enter the following at a command prompt:

    cacls "C:\Program Files\Common Files\Microsoft Shared\VBA\VBA6\vbe6.dll" /E /P everyone:N

    For Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2, enter the following at an elevated command prompt:

    takeown /f "C:\Program Files\Common Files\Microsoft Shared\VBA\VBA6\vbe6.dll"
icacls "C:\Program Files\Common Files\Microsoft Shared\VBA\VBA6\vbe6.dll" /save %TEMP%\VBE6_ACL.TXT
icacls "C:\Program Files\Common Files\Microsoft Shared\VBA\VBA6\vbe6.dll" /deny everyone:(F)

    Impact of workaround. Embedded ActiveX controls (such as macros) will not run in Office documents. For instance, users will be unable to insert objects into Office documents.

    How to undo the workaround.

    For Microsoft Windows 2000, Windows XP, and Windows Server 2003, enter the following at a command prompt:

    cacls "C:\Program Files\Common Files\Microsoft Shared\VBA\VBA6\vbe6.dll" /E /R everyone

    For Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2, enter the following at a command prompt:

    icacls "C:\Program Files\Common Files\Microsoft Shared\VBA\VBA6\" /restore %TEMP%\VBE6_ACL.TXT

  • Use the Microsoft Office Isolated Conversion Environment (MOICE) when opening files from unknown or untrusted sources

    The Microsoft Office Isolated Conversion Environment (MOICE) helps protect Office 2003 installations by more securely opening Word, Excel, and PowerPoint binary format files.

    To install MOICE, you must have Office 2003 or 2007 Office system installed.

    To install MOICE, you must have the Compatibility Pack for Word, Excel, and PowerPoint 2007 File Formats. The compatibility pack is available as a free download from the Microsoft Download Center:

    Download the FileFormatConverters.exe package now

    MOICE requires all updates that are recommended for all Office programs. Visit Microsoft Update to install all recommended updates:

    https:

    To enable MOICE, change the registered handler for the office file formats. The following table describes the command to enable or to disable MOICE for the Office file formats:

Command to enable MOICE to be the registered handler Command to disable MOICE as the registered handler
ASSOC .XLS=oice.excel.sheet ASSOC .xls=Excel.Sheet.8
ASSOC .XLT=oice.excel.template ASSOC .xlt=Excel.Template
ASSOC .XLA=oice.excel.addin ASSOC .xla=Excel.Addin
ASSOC .doc=oice.word.document ASSOC .doc=Word.Document.8
ASSOC .PPT=oice.powerpoint.show ASSOC .ppt=PowerPoint.Show.8
ASSOC .POT=oice.powerpoint.template ASSOC .PPS=oice.powerpoint.slideshow
ASSOC .PPS=oice.powerpoint.slideshow ASSOC .pps=PowerPoint.SlideShow.8

Note On Windows Vista, Windows Server 2008, Windows 7, and Windows Server 2008 R2, the commands above will need to be run from an elevated command prompt.

For more information on MOICE, see Microsoft Knowledge Base Article 935865.

Impact of workaround. Office 2003 and earlier formatted documents that are converted to the 2007 Microsoft Office System Open XML format by MOICE will not retain macro functionality. Additionally, documents with passwords or that are protected with Digital Rights Management cannot be converted.

**How to undo the workaround. **For information on how to undo this workaround, see Microsoft Knowledge Base Article 935865.

  • Do not open or save Microsoft Office files that you receive from untrusted sources or that you receive unexpectedly from trusted sources. This vulnerability could be exploited when a user opens a specially crafted file.

FAQ for VBE6.dll Stack Memory Corruption Vulnerability - CVE-2010-0815

What is the scope of the vulnerability?
This is a remote code execution vulnerability in Microsoft Visual Basic for Applications (VBA). An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

What causes the vulnerability?
The vulnerability is caused by the way that Visual Basic for Applications searches for ActiveX controls in a document that supports VBA. As a result, it is possible for a host application, such as Microsoft Office or a third-party application developed for Visual Basic programmability, to pass a specially crafted document with embedded ActiveX controls to the VBA runtime creating a condition that could allow arbitrary code to be run.

What is Visual Basic for Applications (VBA)?
Microsoft VBA is a development technology for developing client desktop packaged applications and integrating them with existing data and systems. Microsoft VBA is based on the Microsoft Visual Basic development system. Microsoft Office products include VBA and make use of VBA to perform certain functions. VBA can also be used to build customized applications based around an existing host application.

What might an attacker use the vulnerability to do?
An attacker who successfully exploited this vulnerability could take complete control of an affected system. An attacker could then install programs; view, change, or delete data; or create new accounts with full user rights. Users whose accounts are configured to have fewer user rights on the system could be less impacted than users who operate with administrative user rights.

How could an attacker exploit the vulnerability?
In order for an attack to be successful, a user would have to open a specially crafted document that supports VBA. This document could be any type of document that supports VBA, such as a Word document, Excel spreadsheet, or PowerPoint presentation.

In an e-mail attack scenario, an attacker could exploit the vulnerability by sending a specially-crafted Office file to the user and by convincing the user to open the file.

In a Web-based attack scenario, an attacker would have to host a Web site that contains a document that supports VBA such as an Office file that is used to attempt to exploit this vulnerability. In addition, compromised Web sites and Web sites that accept or host user-provided content could contain specially crafted content that could exploit this vulnerability. An attacker would have no way to force users to visit a specially crafted Web site. Instead, an attacker would have to convince them to visit the Web site, typically by getting them to click a link in an e-mail message or Instant Messenger message that takes them to the attacker's Web site, and then convince them to open the specially crafted Office file.

What systems are primarily at risk from the vulnerability?
Workstations and terminal servers where Microsoft Visual Basic for Applications or Microsoft Office is used are primarily at risk. Servers could be at more risk if administrators allow users to log on to servers and to run programs. However, best practices strongly discourage allowing this.

What does the update do?
The update addresses the vulnerability by modifying the way that Microsoft Visual Basic for Applications searches for ActiveX Controls embedded in documents.

When this security bulletin was issued, had this vulnerability been publicly disclosed?
No. Microsoft received information about this vulnerability through responsible disclosure.

When this security bulletin was issued, had Microsoft received any reports that this vulnerability was being exploited?
No. Microsoft had not received any information to indicate that this vulnerability had been publicly used to attack customers when this security bulletin was originally issued.

Update Information

Detection and Deployment Tools and Guidance

Manage the software and security updates you need to deploy to the servers, desktop, and mobile systems in your organization. For more information see the TechNet Update Management Center. The Microsoft TechNet Security Web site provides additional information about security in Microsoft products.

Security updates are available from Microsoft Update and Windows Update. Security updates are also available from the Microsoft Download Center. You can find them most easily by doing a keyword search for "security update."

Finally, security updates can be downloaded from the Microsoft Update Catalog. The Microsoft Update Catalog provides a searchable catalog of content made available through Windows Update and Microsoft Update, including security updates, drivers and service packs. By searching using the security bulletin number (such as, "MS07-036"), you can add all of the applicable updates to your basket (including different languages for an update), and download to the folder of your choosing. For more information about the Microsoft Update Catalog, see the Microsoft Update Catalog FAQ.

Note Microsoft discontinued support for Office Update and the Office Update Inventory Tool as of August 1, 2009. To continue getting the latest updates for Microsoft Office products, use Microsoft Update. For more information, see About Microsoft Office Update: Frequently Asked Questions.

Detection and Deployment Guidance

Microsoft provides detection and deployment guidance for security updates. This guidance contains recommendations and information that can help IT professionals understand how to use various tools for detection and deployment of security updates. For more information, see Microsoft Knowledge Base Article 961747.

Microsoft Baseline Security Analyzer

Microsoft Baseline Security Analyzer (MBSA) allows administrators to scan local and remote systems for missing security updates as well as common security misconfigurations. For more information about MBSA, visit Microsoft Baseline Security Analyzer.

The following table provides the MBSA detection summary for this security update.

Software MBSA 2.1.1
Microsoft Office XP Service Pack 3 Yes
Microsoft Office 2003 Service Pack 3 Yes
2007 Microsoft Office System Service Pack 1 and 2007 Microsoft Office System Service Pack 2 Yes
Microsoft Visual Basic for Applications No

The latest version of MBSA has been released: Microsoft Baseline Security Analyzer 2.1.1. For more information, see Microsoft Baseline Security Analyzer 2.1.

Note For customers using legacy software not supported by MBSA 2.1.1, Microsoft Update, and Windows Server Update Services: please visit Microsoft Baseline Security Analyzer and reference the Legacy Product Support section on how to create comprehensive security update detection with legacy tools.

Windows Server Update Services

By using Windows Server Update Services (WSUS), administrators can deploy the latest critical updates and security updates for Microsoft Windows 2000 operating systems and later, Office XP and later, Exchange Server 2003, and SQL Server 2000. For more information about how to deploy this security update using Windows Server Update Services, visit the Windows Server Update Services Web site.

Systems Management Server

The following table provides the SMS detection and deployment summary for this security update.

Software SMS 2.0 SMS 2003 with SUIT SMS 2003 with ITMU Configuration Manager 2007
Microsoft Office XP Service Pack 3 No No Yes Yes
Microsoft Office 2003 Service Pack 3 No No Yes Yes
2007 Microsoft Office System Service Pack 1 and 2007 Microsoft Office System Service Pack 2 No No Yes Yes
Microsoft Visual Basic for Applications No No No No

For SMS 2.0 and SMS 2003, the Security Update Inventory Tool (SUIT) can be used by SMS to detect security updates. See also Downloads for Systems Management Server 2.0.

For SMS 2003, the SMS 2003 Inventory Tool for Microsoft Updates (ITMU) can be used by SMS to detect security updates that are offered by Microsoft Update and that are supported by Windows Server Update Services. For more information about the SMS 2003 ITMU, see SMS 2003 Inventory Tool for Microsoft Updates. For more information about SMS scanning tools, see SMS 2003 Software Update Scanning Tools. See also Downloads for Systems Management Server 2003.

System Center Configuration Manager 2007 uses WSUS 3.0 for detection of updates. For more information about Configuration Manager 2007 Software Update Management, visit System Center Configuration Manager 2007.

For more information about SMS, visit the SMS Web site.

For more detailed information, see Microsoft Knowledge Base Article 910723: Summary list of monthly detection and deployment guidance articles.

Note If you have used an Administrative Installation Point (AIP) for deploying Office XP or Office 2003, you may not be able to deploy the update using SMS if you have updated the AIP from the original baseline. For more information, see the Office Administrative Installation Point heading in this section.

Office Administrative Installation Point

If you installed your application from a server location, the server administrator must update the server location with the administrative update and deploy that update to your system.

Update Compatibility Evaluator and Application Compatibility Toolkit

Updates often write to the same files and registry settings required for your applications to run. This can trigger incompatibilities and increase the time it takes to deploy security updates. You can streamline testing and validating Windows updates against installed applications with the Update Compatibility Evaluator components included with Application Compatibility Toolkit.

The Application Compatibility Toolkit (ACT) contains the necessary tools and documentation to evaluate and mitigate application compatibility issues before deploying Microsoft Windows Vista, a Windows Update, a Microsoft Security Update, or a new version of Windows Internet Explorer in your environment.

Security Update Deployment

Affected Software

For information about the specific security update for your affected software, click the appropriate link:

Office XP (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service Packs There are no more service packs planned for this software. The update for this issue may be included in a future update rollup.
Deployment
Installing without user intervention OfficeXP-kb976380-fullfile-enu /q:a
Installing without restarting OfficeXP-kb976380-fullfile-enu /r:n
Update log file Not applicable
Further information For detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance. \ \ For features you can selectively install, see the Office Features for Administrative Installations subsection in this section.
Restart Requirement
Restart required? In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.\ \ To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Hotpatching Not applicable
Removal Information Use Add or Remove Programs tool in Control Panel.Note When you remove this update, you may be prompted to insert the Microsoft Office XP CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.
File Information See Microsoft Knowledge Base Article 976380
Registry Key Verification Not applicable

Office Features

The following table contains the list of feature names (case sensitive) that must be reinstalled for the update. To install all features, you can use REINSTALL=ALL or you can install the following features:

Product Feature
ACCESS, FP, OUTLOOK, PIPC1, PPT, PROPLUS, ACCESSRT, PRO, PUB, SBE, STD, STDEDU, WORD, EXCEL, PRJPRO, PRJSTD VBAFiles

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the 2.0 or later version of Windows Installer, visit one of the following Microsoft Web sites:

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Switch Description
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/q:u Specifies user-quiet mode, which presents some dialog boxes to the user.
/q:a Specifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:n Never restarts the system after installation.
/r:I Prompts the user to restart the system if a restart is required, except when used with /q:a.
/r:a Always restarts the system after installation.
/r:s Restarts the system after installation without prompting the user.
/n:v No version checking - Install the program over any earlier version.

Note You can combine these switches into one command. For backward compatibility, the security update also supports the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

To remove this security update, use the Add or Remove Programs tool in Control Panel. Note When you remove this update, you may be prompted to insert the Microsoft Office XP CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Verifying That the Update Has Been Applied

  • Microsoft Baseline Security Analyzer
    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification
    Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.
    2. In the Search Results pane, click All files and folders under Search Companion.
    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.
    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties.
      Note Depending on the version of the operating system or programs installed, some of the files that are listed in the file information table may not be installed.
    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table.
      Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Office 2003 (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service Packs There are no more service packs planned for this software. The update for this issue may be included in a future update rollup.
Deployment
Installing without user intervention Office2003-kb976382-fullfile-enu /q:a
Installing without restarting Office2003-kb976382-fullfile-enu /r:n
Update log file Not applicable
Further information For detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance. \ \ For features you can selectively install, see the Office Features for Administrative Installations subsection in this section.
Restart Requirement
Restart required? In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.\ \ To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Hotpatching Not applicable
Removal Information After you install the update, you cannot remove it. To revert to an installation before the update was installed; you must remove the application, and then install it again from the original media.
File Information See Microsoft Knowledge Base Article 976382
Registry Key Verification Not applicable

Office Features

The following table contains the list of feature names (case sensitive) that must be reinstalled for the update. To install all features, you can use REINSTALL=ALL or you can install the following features:

Product Feature
ACCESSRT, OUTLS11, VISVEA, PPT11, ACC11, BASIC11, FP11, OUTL11, OUTLSM11, PERS11, PRO11SB, PROI11, PRO11, PUB11, STDP11, STD11, WORD11, EXCEL11, PRJPROE, PRJPRO, PRJSTDE, PRJSTD, VISPRO, VISPROR, VISSTD, VISSTDR VBAFile

Note Administrators working in managed environments can find complete resources for deploying Office updates in an organization at the Office Admin Update Center. At that site, scroll down and look under the Update Resources section for the software version you are updating. The Windows Installer Documentation also provides more information about the parameters supported by Windows Installer.

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 2.0 or later be installed on the system. All supported versions of Windows include Windows Installer 2.0 or a later version.

To install the 2.0 or later version of Windows Installer, visit one of the following Microsoft Web sites:

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Switch Description
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/q:u Specifies user-quiet mode, which presents some dialog boxes to the user.
/q:a Specifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:n Never restarts the system after installation.
/r:I Prompts the user to restart the system if a restart is required, except when used with /q:a.
/r:a Always restarts the system after installation.
/r:s Restarts the system after installation without prompting the user.
/n:v No version checking - Install the program over any earlier version.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

After you install the update, you cannot remove it. To revert to an installation before the update was installed; you must remove the application, and then install it again from the original media.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer
    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification
    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start and then enter an update file name in Start Search.
    2. When the file appears under Programs, right-click on the file name and click Properties.
    3. Under the General tab, compare the file size with the file information tables provided in the bulletin KB article.
    4. You may also click on the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
    5. Finally, you may also click on the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

The 2007 Microsoft Office System (all editions)

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service Packs The update for this issue will be included in a future service pack or update rollup
Deployment
Installing without user intervention office2007-kb976321-fullfile-x86-glb /passive
Installing without restarting office2007-kb976321-fullfile-x86-glb /norestart
Update log file Not applicable
Further information For detection and deployment, see the earlier section, Detection and Deployment Tools and Guidance.
Restart Requirement
Restart required? In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.\ \ To help reduce the chance that a restart will be required, stop all affected services and close all applications that may use the affected files prior to installing the security update. For more information about the reasons why you may be prompted to restart, see Microsoft Knowledge Base Article 887012.
Hotpatching Not applicable
Removal Information Use Add or Remove Programs tool in Control Panel.
File Information See Microsoft Knowledge Base Article 976321
Registry Key Verification Not applicable

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system. For more information about Administrative Installation Points, refer to the Office Administrative Installation Point information in the Detection and deployment Tools and Guidance subsection.

This security update requires that Windows Installer 3.1 or later be installed on the system.

To install the 3.1 or later version of Windows Installer, visit one of the following Microsoft Web sites:

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Switch Description
/? or /help Displays usage dialog.
/passive Specifies passive mode. Requires no user interaction; users see basic progress dialogs but cannot cancel.
/quiet Specifies quiet mode, or suppresses prompts, when files are being extracted.
/norestart Suppresses restarting the system if the update requires a restart.
/forcerestart Automatically restarts the system after applying the update, regardless of whether the update requires the restart.
/extract Extracts the files without installing them. You are prompted for a target folder.
/extract:<path> Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/lang:<LCID> Forces the use of a specific language, when the update package supports that language.
/log:<log file> Enables logging, by both Vnox and Installer, during the update installation.

Note You can combine these switches into one command. For backward compatibility, the security update also supports many of the setup switches that the earlier version of the Setup program uses. For more information about the supported installation switches, see Microsoft Knowledge Base Article 262841.

Removing the Update

To remove this security update, use the Add or Remove Programs tool in Control Panel.

Note When you remove this update, you may be prompted to insert the 2007 Microsoft Office CD in the CD drive. Additionally, you may not have the option to uninstall the update from the Add or Remove Programs tool in Control Panel. There are several possible causes for this issue. For more information about the removal, see Microsoft Knowledge Base Article 903771.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer
    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification
    Because there are several editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start and then enter an update file name in Start Search.
    2. When the file appears under Programs, right-click on the file name and click Properties.
    3. Under the General tab, compare the file size with the file information tables provided in the bulletin KB article.
    4. You may also click on the Details tab and compare information, such as file version and date modified, with the file information tables provided in the bulletin KB article.
    5. Finally, you may also click on the Previous Versions tab and compare file information for the previous version of the file with the file information for the new, or updated, version of the file.

Microsoft Visual Basic for Applications

Reference Table

The following table contains the security update information for this software. You can find additional information in the subsection, Deployment Information, in this section.

Inclusion in Future Service Packs The update for this issue may be included in a future update rollup
Deployment
Installing without user intervention VBA65-KB974945-x86-ENU /q:a
Installing without restarting VBA65-KB974945-x86-ENU /r:n
Update log file Not applicable
Further information See the subsection, Detection and Deployment Tools and Guidance
Restart Requirement
Restart required? In some cases, this update does not require a restart. If the required files are being used, this update will require a restart. If this behavior occurs, a message appears that advises you to restart.
HotPatching Not applicable
Removal Information After you install the update, you cannot remove it.
File Information See Microsoft Knowledge Base Article 974945
Registry Key Verification Not applicable\ \ Note You may be able to verify the file installed by the security update as follows:\ File version of vbe6.dll is 6.5.10.53

Deployment Information

Installing the Update

You can install the update from the appropriate download link in the Affected and Non-Affected Software section. If you installed your application from a server location, the server administrator must instead update the server location with the administrative update and deploy that update to your system.

For more information about the terminology that appears in this bulletin, such as hotfix, see Microsoft Knowledge Base Article 824684.

This security update supports the following setup switches.

Switch Description
/q Specifies quiet mode, or suppresses prompts, when files are being extracted.
/q:u Specifies user-quiet mode, which presents some dialog boxes to the user.
/q:a Specifies administrator-quiet mode, which does not present any dialog boxes to the user.
/t:path Specifies the target folder for extracting files.
/c Extracts the files without installing them. If /t:path is not specified, you are prompted for a target folder.
/c:path Overrides the install command that is defined by author. Specifies the path and name of the Setup.inf or .exe file.
/r:n Never restarts the system after installation.
/r:I Prompts the user to restart the system if a restart is required, except when used with /q:a.
/r:a Always restarts the system after installation.
/r:s Restarts the system after installation without prompting the user.
/n:v No version checking - Install the program over any earlier version.

Note You can combine these switches into one command.

Removing the Update

After you install the update, you cannot remove it.

Verifying that the Update Has Been Applied

  • Microsoft Baseline Security Analyzer
    To verify that a security update has been applied to an affected system, you may be able to use the Microsoft Baseline Security Analyzer (MBSA) tool. See the section, Detection and Deployment Tools and Guidance, earlier in this bulletin for more information.

  • File Version Verification
    Note Because there are several versions and editions of Microsoft Windows, the following steps may be different on your system. If they are, see your product documentation to complete these steps.

    1. Click Start, and then click Search.

    2. In the Search Results pane, click All files and folders under Search Companion.

    3. In the All or part of the file name box, type a file name from the appropriate file information table, and then click Search.

    4. In the list of files, right-click a file name from the appropriate file information table, and then click Properties. Note Depending on the edition of the operating system, or the programs that are installed on your system, some of the files that are listed in the file information table may not be installed.

    5. On the Version tab, determine the version of the file that is installed on your system by comparing it to the version that is documented in the appropriate file information table. Note Attributes other than the file version may change during installation. Comparing other file attributes to the information in the file information table is not a supported method of verifying that the update has been applied. Also, in certain cases, files may be renamed during installation. If the file or version information is not present, use one of the other available methods to verify update installation.

Other Information

Acknowledgments

Microsoft thanks the following for working with us to help protect customers:

Microsoft Active Protections Program (MAPP)

To improve security protections for customers, Microsoft provides vulnerability information to major security software providers in advance of each monthly security update release. Security software providers can then use this vulnerability information to provide updated protections to customers via their security software or devices, such as antivirus, network-based intrusion detection systems, or host-based intrusion prevention systems. To determine whether active protections are available from security software providers, please visit the active protections Web sites provided by program partners, listed in Microsoft Active Protections Program (MAPP) Partners.

Support

  • Customers in the U.S. and Canada can receive technical support from Security Support or 1-866-PCSAFETY. There is no charge for support calls that are associated with security updates. For more information about available support options, see Microsoft Help and Support.
  • International customers can receive support from their local Microsoft subsidiaries. There is no charge for support that is associated with security updates. For more information about how to contact Microsoft for support issues, visit the International Support Web site.

Disclaimer

The information provided in the Microsoft Knowledge Base is provided "as is" without warranty of any kind. Microsoft disclaims all warranties, either express or implied, including the warranties of merchantability and fitness for a particular purpose. In no event shall Microsoft Corporation or its suppliers be liable for any damages whatsoever including direct, indirect, incidental, consequential, loss of business profits or special damages, even if Microsoft Corporation or its suppliers have been advised of the possibility of such damages. Some states do not allow the exclusion or limitation of liability for consequential or incidental damages so the foregoing limitation may not apply.

Revisions

  • V1.0 (May 11, 2010): Bulletin published.
  • V1.1 (May 19, 2010): Added an Update FAQ to explain the bulletin-only changes. There were no changes to the security update files or detection logic. Customers who have already successfully updated their systems do not need to take any action.

Built at 2014-04-18T13:49:36Z-07:00 </https:>