Analyze load test results and errors in the Tables view of the Load Test Analyzer
Applies to: 
Visual Studio 
Visual Studio for Mac
Note
This article applies to Visual Studio 2017. If you're looking for the latest Visual Studio documentation, see Visual Studio documentation. We recommend upgrading to the latest version of Visual Studio. Download it here
When you view the results of a load test run, you can display different panes that provide you with different ways to analyze the data. You can view the data as a graph, to see how it changes over time, or you can view the data as detailed tables.
Note
Web performance and load test functionality is deprecated. Visual Studio 2019 is the last version where web performance and load testing will be fully available. For more information, see the Cloud-based load testing service end of life blog post. To reduce the impact on users some minimum support is still available in Visual Studio 2022 Preview 3 or later. Users should also note web performance and load test functionality only supports Internet Explorer which is not available on Windows 11 and some versions of Windows 10. Read more on Internet Explorer Lifecycle policy.
To switch to table view, choose Tables on the load test toolbar. To switch between the different tables, use the Table drop-down list on the toolbar above the table grid. In table view, you can view up to four tables at a time. For more information, see Tile load test tables in this topic.
Most numeric values displayed in a table for performance counters are cumulative over the whole load test run. Columns named Last are an exception, and represent the value from the most recent sampling interval.
Note
Columns named Last are available only while a load test is executing. After a load test is completed, these columns are not available.
You can sort most tables by choosing the title of the column that you want to sort on. By default, some tables do not display all available columns. You can add columns to tables, if columns are available. To add columns, right-click the table and then choose Add/Remove Columns.
Note
You can copy the data from a table into other applications such as Excel for additional analysis.
The load test tables
The following table lists the tables that are available to analyze load test runs.
| Table Name | Description |
|---|---|
| Errors | Displays a list of errors that occurred during the load test run. For more information, see The Errors table in this topic, and Analyze load test results. |
| Pages | Displays a list of pages accessed during a load test run. Some data in this table is available only after a load test has completed. For more information, see How to: View web page response. |
| Requests | Displays details for individual requests issued during a load test. This includes all HTTP requests, and dependent requests such as images. For more information, see The Requests table in this topic. |
| SQL Trace | Displays the results of SQL tracing. This table is available only after a load test has completed, and only if SQL tracing was used during the test. For more information, see The SQL Trace data table in this topic. |
| Tests | Displays details for individual tests run during a load test. For more information, see The Tests table in this topic. |
| Thresholds | Displays a list of threshold rule violations that occurred during the load test run. For more information, see Analyzing threshold rule violations. |
| Transactions | Displays a list of transactions that occurred during a load test run. For more information, see The Transactions table in this topic. |
| Agents | Displays only if your load test is using a test controller and test agents. Displays a list of the agents that were used during the load test run. The Agents table includes how many requests the agent tested and of those requests, how many failed. Additionally, the Agents table includes the number of tests in the load tests test mix that the agent tested and of those, how many failed. |
| Test Details | Displays details for the tests included in the test mix for the load test. The details include the name of the test, the scenario that the test was in, the time that the test started, the length of time it took the test to run, and the test outcome indicating if the test passed or failed. If the test failed, a link is present in the Details column. You can choose the link which will take you to the Web Performance Test Editor with the failed request highlighted. |
Collect percentile data
Some load test tables can contain additional columns, which include percentile data and response times broken into groups based on network emulation. By default, this data is not collected. Percentile data is only available when you save results to a database, and not when you save locally. For more information, see Managing load test results in the Load Test Results Repository. Additionally, to collect this data, in the Load Test Editor, under the Run Settings node, select the specific run setting node to change. In the Properties window, for the Timing Details Storage property, select StatisticsOnly or AllIndividualDetails. For more information, see How to: View web page response.
The Requests table
The Requests table displays details for individual requests issued during a load test. This includes all HTTP requests, and dependent requests such as images. The table lists requests by test and scenario, because one request can be included in many tests and scenarios.
The following table lists the columns in the Requests table:
| Column | Description | Visible by Default |
|---|---|---|
| Request | The URL of the request. For example, home.html, or orange-arrow.gif. | Yes |
| Scenario | The name of the scenario. | Yes |
| Test | The name of the test. | Yes |
| Total | The total number of this web performance test request issued during the load test run. The total includes passed and failed requests, but does not include cached requests, because they are not issued to the web server. | Yes |
| Passed | The number of times the request was issued and passed. | No |
| Failed | The number of times the request was issued and failed. The entries in this column appear as hyperlinks. You can choose any hyperlink to view a list of the individual errors in the Load Test Errors dialog box. For more information, see Analyze load test results. | Yes |
| Cached | The total number of times the request was already cached. | No |
| Requests/Sec | The rate per second of the request during the load test run. | No |
| Passed/Sec | The rate per second of this request during the load test run, for the instances of this request that passed. | No |
| Failed/Sec | The rate per second of this request during the load test run, for the instances of this request that failed. | No |
| First Byte Time | The average time to receive the first byte of the response, measured from the time the request was sent to the web server. The units are seconds. | No |
| Response Time | The average time to receive the entire response to a request, measured from the time the request was sent to the web server. The units are seconds. | Yes |
| Content Length | The average length of the content of the response to the request. The units are bytes. | Yes |
The Tests table
The Tests table displays details for individual tests run during a load test. The table lists tests by test and scenario, because one test can be included in many scenarios.
The following table lists the columns in the Tests table.
| Column | Description | Visible by Default |
|---|---|---|
| Test | The name of the test. | Yes |
| Scenario | The name of the scenario. | Yes |
| Total | The total number of times the test was run in the scenario. This includes the number of times the test passed and failed. | Yes |
| Passed | The number of times the test was run in the scenario and passed. | Yes |
| Failed | The number of times the test was run in the scenario and failed. The entries in this column appear as hyperlinks. You can choose any hyperlink to view a list of the individual errors in the Load Test Errors dialog box. For more information, see Analyze load test results. | Yes |
| Tests/Sec | The rate per second of the test during the load test run. | Yes |
| Passed/Sec | The rate per second of this test during the load test run, for the instances of this test that passed. | No |
| Failed/Sec | The rate per second of this test during the load test run, for the instances of this test that failed. | No |
| Test Time | The average time to execute the test during the load test run. The units are seconds. | Yes |
| 90% Test Time | The 90th percentile value for Test Time. | No |
| 95% Test Time | The 95th percentile value for Test Time. | Yes |
| Requests/Test | The average number of requests in the test if it is a web performance test. | No |
The Transactions table
The Transactions table displays a list of transactions that occurred during a load test run. Transactions refer to either transactions defined in a web performance test, or timers defined in a unit test. Transaction does not refer to database transactions.
The following table lists the columns in the Transactions table.
Note
To view all columns, you must enable the Timing Details Storage property that is associated with the active run setting. For more information, see How to: Specify the Timing Details Storage property.
| Column | Description | Visible without timing details |
|---|---|---|
| Transaction | The name of the transaction. | Yes |
| Scenario | The name of the scenario. | Yes |
| Test | The name of the test. | Yes |
| Total | The total number of transactions issued during the load test run. | Yes |
| Transaction Time | The time to execute the transaction during a load test run. For web performance tests, think time is included in the calculation. The units are seconds. | No |
| Response Time | The response time for the web performance test transaction in a load test run. Response Time is different from Transaction Time in that Response Time does not include any think time that occurred during the transaction. The units are seconds. | No |
| Ave. Transaction Time | The average transaction time. This time includes think times. For example, if you have three requests and each has a think time, this time will include those think times and the actual time to execute requests. | No |
| Ave. Response Time | The average response time for a web performance test transaction in a load test run. Response Time is different from Transaction Time in that Response Time does not include any think time that occurred during the transaction. The units are seconds. | No |
| Min Response Time | This does not include think times. | No |
| Max Response Time | This does not include think times. | No |
| Median Response Time | This does not include think times. | No |
| 90% Response Time | The 90th percentile value for Transaction Time. This does not include think times. Note: This is different from Visual Studio Team System 2008 Test Load Agent, which used the 90% Transaction Time value. | No |
| 95% Response Time | The 95th percentile value for Transaction Time. This does not include think times. Note: This is different from Visual Studio Team System 2008 Test Load Agent, which used the 95% Transaction Time value. | No |
| 99% Response Time | The 99th percentile value for Transaction Time. This does not include think times. | No |
| Std Dev Response Time | This does not include think times. | No |
The Errors table
When you run a load test, you can analyze errors that occur. Analyzing errors and adjusting your tests are an important part of the load test process. If any errors occurred, an errors hyperlink appears on the load test status bar and specifies the number of errors that occurred. To display the errors table, you choose the hyperlink.
The errors table groups the errors that occurred during a load test by the type and subtype of the error. There is also a total line in the table that specifies the total count of all the errors that occurred.
The errors table contains the following columns:
| Column | Description | Visible by default |
|---|---|---|
| Type | The type of the error. For example, HttpError. | Yes |
| SubType | The subtype of the error. For example, LoadTestException. | Yes |
| Count | The number of errors of this type that occurred during the load test. The entries in this column appear as hyperlinks. You can choose any hyperlink to view a list of the individual errors. | Yes |
| Last Message | A message that describes the error. For example, 404 - NotFound. | Yes |
For more information, see Working with load test tables.
Drill down to the error list
The errors table groups the errors by the type and subtype of the error. To view a table of the individual errors, you display the Load Test Errors dialog box. To display the dialog box, choose a hyperlink in the Count column of the errors table. You can also display the dialog box by right-clicking a row in the errors table that is populated, and choosing Errors.
Note
Only the first 1,000 instances of any error type and subtype combination are collected. When you display the Load Test Errors dialog box, you will see at most the first 1,000 instances that error.
The Load Test Errors table contains the following columns:
| Column | Description |
|---|---|
| Time | The time during the load test at which the error occurred. |
| Agent | The name of the agent computer on which the error occurred. This is important when you run load tests using test controllers and test agents. For more information, see Install and configure test agents. |
| Test | The name of the web performance test in which the error occurred. |
| Scenario | The name of the scenario in which the error occurred. |
| Request | The URL of the request in which the error occurred. |
| Type | The type of the error. For example, HttpError. |
| SubType | The subtype of the error. For example, LoadTestException. |
| Text | The text of the error message. For example, 404 - NotFound. |
| Stack | The entries in this column are either empty, or the word Stack is formatted as a hyperlink. You can choose the hyperlink to view a stack trace of the error. |
| Details | The entries in this column are either empty, or the word TestLog is formatted as a hyperlink. This link can help you isolate errors in the load test. For example, choosing the TestLog link on a web performance test request error will open up the results for the web performance test in the Web Performance Test Results Viewer and highlight the request error. |
Note
You can sort the table by choosing the column headers.
The SQL Trace data table
You can collect SQL trace data during a load test run to analyze later. Collecting trace data lets you identify the slowest running queries and stored procedures in the SQL Server database being tested.
If SQL tracing is enabled, a file is created during the load test run that contains the trace data. This data is automatically saved in the Load Test Results Store at the end of the test run and the trace file is deleted. You analyze the trace data in the SQL Trace table after your load test has completed.
To view SQL trace data
In the Load Test Analyzer, choose Tables on the toolbar to make sure that the table grid is displayed.
In the Table drop-down list box, select SQL Trace.
The trace data that was collected during the run is displayed in the grid. The table lists the slowest running SQL operations sorted by duration, with the slowest at the top. Typically, the Duration column is the first column to examine. The data is displayed in milliseconds.
The columns displayed are as follows:
Event Class
Duration
CPU
Reads
Writes
TextData
StartTime
EndTime
If you want to trace SQL events other than the data identified in these columns, you can set up your own custom SQL tracing using the SQL Profiler tool, separate from Visual Studio.
Tile load test tables
When you view the results of a load test run, you can view the data as detailed tables. To switch to table view, choose Tables on the load test toolbar. The tables that are available are Errors, Pages, Requests, SQL Trace, Tests, Thresholds, and Transactions. For more information, see Working with load test tables.
In table view, you can view up to four tables at a time without the tables overlapping.
To tile tables
On the Load Test Analyzer toolbar, choose Tables.
Table view opens. The default layout is two horizontal panels.
On the Load Test Analyzer toolbar, choose the layout button and then choose one of the following options:
One Panel
Two Horizontal Panels
Three Horizontal Panels
Four Horizontal Panels
To switch between the different tables, use the drop-down list above the table grid in each panel.
Note
You cannot display the same table in more than one panel. If you change the table displayed in one panel to a table already displayed in another panel, the tables switch panels.