- PENDING
- 600
|
An operation is pending.
|
- ERROR_INVALID_PORT_HANDLE
- 601
|
The port handle supplied is not valid.
|
- ERROR_PORT_ALREADY_OPEN
- 602
|
The specified port is already open.
|
- ERROR_BUFFER_TOO_SMALL
- 603
|
The buffer supplied is too small.
|
- ERROR_WRONG_INFO_SPECIFIED
- 604
|
The port information specified is incorrect.
|
- ERROR_CANNOT_SET_PORT_INFO
- 605
|
The port information specified cannot be set.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_PORT_NOT_CONNECTED
- 606
|
The port specified is not connected.
|
- ERROR_EVENT_INVALID
- 607
|
An event that is not valid was detected.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_DEVICE_DOES_NOT_EXIST
- 608
|
The specified device does not exist.
|
- ERROR_DEVICETYPE_DOES_NOT_EXIST
- 609
|
The specified device type does not exist.
|
- ERROR_BUFFER_INVALID
- 610
|
The buffer supplied is not valid.
|
- ERROR_ROUTE_NOT_AVAILABLE
- 611
|
A route was specified that is not available.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_ROUTE_NOT_ALLOCATED
- 612
|
The specified route is not allocated.
|
- ERRERROR_INVALID_COMPRESSION_SPECIFIED
- 613
|
The specified compression is not valid.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_OUT_OF_BUFFERS
- 614
|
There were insufficient buffers available.
|
- ERROR_PORT_NOT_FOUND
- 615
|
The specified port was not found.
|
- ERROR_ASYNC_REQUEST_PENDING
- 616
|
An asynchronous request is pending.
|
- ERROR_ALREADY_DISCONNECTING
- 617
|
The specified port or device is already disconnecting.
|
- ERROR_PORT_NOT_OPEN
- 618
|
The specified port is not open.
|
- ERROR_PORT_DISCONNECTED
- 619
|
The specified port is disconnected.
|
- ERROR_NO_ENDPOINTS
- 620
|
No endpoints could be determined.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_CANNOT_OPEN_PHONEBOOK
- 621
|
Cannot open the specified phone book file.
|
- ERROR_CANNOT_LOAD_PHONEBOOK
- 622
|
Cannot load the specified phone book file.
|
- ERROR_CANNOT_FIND_PHONEBOOK_ENTRY
- 623
|
Cannot find the specified phone book entry.
|
- ERROR_CANNOT_WRITE_PHONEBOOK
- 624
|
Cannot write to the specified phone book file.
|
- ERROR_CORRUPT_PHONEBOOK
- 625
|
Information found in the specified phone book is not valid.
|
- ERROR_CANNOT_LOAD_STRING
- 626
|
A string could not be loaded.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_KEY_NOT_FOUND
- 627
|
Cannot find the specified key.
|
- ERROR_DISCONNECTION
- 628
|
The specified port was disconnected.
|
- ERROR_REMOTE_DISCONNECTION
- 629
|
The specified port was disconnected by the remote computer.
|
- ERROR_HARDWARE_FAILURE
- 630
|
The specified port was disconnected due to hardware failure.
|
- ERROR_USER_DISCONNECTION
- 631
|
The specified port was disconnected by the user.
|
- ERROR_INVALID_SIZE
- 632
|
Incorrect structure size.
|
- ERROR_PORT_NOT_AVAILABLE
- 633
|
The specified port is already in use or is not configured for remote access dial-out.
|
- ERROR_CANNOT_PROJECT_CLIENT
- 634
|
Your computer could not be registered on the remote network.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_UNKNOWN
- 635
|
An unknown error has occurred.
|
- ERROR_WRONG_DEVICE_ATTACHED
- 636
|
The wrong device is attached to the specified port.
|
- ERROR_BAD_STRING
- 637
|
A string was detected that could not be converted.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_REQUEST_TIMEOUT
- 638
|
The request has timed out.
|
- ERROR_CANNOT_GET_LANA
- 639
|
No asynchronous net is available.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_NETBIOS_ERROR
- 640
|
An error has occurred involving NetBIOS.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_SERVER_OUT_OF_RESOURCES
- 641
|
he server cannot allocate NetBIOS resources needed to support the client.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_NAME_EXISTS_ON_NET
- 642
|
One of your computer's NetBIOS names is already registered on the remote network.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_SERVER_GENERAL_NET_FAILURE
- 643
|
A network adapter at the server failed.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- WARNING_MSG_ALIAS_NOT_ADDED
- 644
|
You will not receive network message popups.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_AUTH_INTERNAL
- 645
|
An internal authentication error has occurred.
|
- ERROR_RESTRICTED_LOGON_HOURS
- 646
|
The specified account is not permitted to log in at this time of day.
|
- ERROR_ACCT_DISABLED
- 647
|
The specified account is disabled.
|
- ERROR_PASSWD_EXPIRED
- 648
|
The specified password has expired.
|
- ERROR_NO_DIALIN_PERMISSION
- 649
|
The specified account does not have remote access permissions.
|
- ERROR_SERVER_NOT_RESPONDING
- 650
|
The remote access server is not responding.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_FROM_DEVICE
- 651
|
Your modem or other connection device has reported an error.
|
- ERROR_UNRECOGNIZED_RESPONSE
- 652
|
An unrecognized response was returned by the device.
|
- ERROR_MACRO_NOT_FOUND
- 653
|
A macro required by the device was not found in the device .INF file section.
|
- ERROR_MACRO_NOT_DEFINED
- 654
|
A command or response in the device .INF file section refers to an undefined macro.
|
- ERROR_MESSAGE_MACRO_NOT_FOUND
- 655
|
The <message> macro was not found in the device .INF file section.
|
- ERROR_DEFAULTOFF_MACRO_NOT_FOUND
- 656
|
The \
|
- ERROR_EMPTY_INI_FILE
- 690
|
The media .INI file is empty.
|
- ERROR_AUTHENTICATION_FAILURE
- 691
|
Access denied because the user name, password, or both is not valid on the domain.
|
- ERROR_PORT_OR_DEVICE
- 692
|
A hardware failure has occurred in the port or attached device
|
- ERROR_NOT_BINARY_MACRO
- 693
|
The macro is not a binary macro.
|
- ERROR_DCB_NOT_FOUND
- 694
|
DCB not found.
|
- ERROR_STATE_MACHINES_NOT_STARTED
- 695
|
State machines are not started.
|
- ERROR_STATE_MACHINES_ALREADY_STARTED
- 696
|
State machines are already started.
|
- ERROR_PARTIAL_RESPONSE_LOOPING
- 697
|
Partial response looping.
|
- ERROR_UNKNOWN_RESPONSE_KEY
- 698
|
A response key name in the device .INF file is not in the expected format.
|
- ERROR_RECV_BUF_FULL
- 699
|
The device response caused a buffer overflow.
|
- ERROR_CMD_TOO_LONG
- 700
|
The expanded command in the device .INF file is too long.
|
- ERROR_UNSUPPORTED_BPS
- 701
|
The device moved to a connection speed that is not supported by the COM driver.
|
- ERROR_UNEXPECTED_RESPONSE
- 702
|
Device response received when none expected.
|
- ERROR_INTERACTIVE_MODE
- 703
|
An error occurred because the interactive mode is enabled.
|
- ERROR_BAD_CALLBACK_NUMBER
- 704
|
A bad callback number was specified.
|
- ERROR_INVALID_AUTH_STATE
- 705
|
The specified authentication state is not valid.
|
- ERROR_WRITING_INITBPS
- 706
|
An error occurred when writing the initial connection speed.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_X25_DIAGNOSTIC
- 707
|
An X.25 diagnostic indication was received.
|
- ERROR_ACCT_EXPIRED
- 708
|
The specified account has expired.
|
- ERROR_CHANGING_PASSWORD
- 709
|
An error occurred while attempting to change the password on the domain.
|
- ERROR_OVERRUN
- 710
|
Serial overrun errors were detected while communicating with your modem.
|
- ERROR_RASMAN_CANNOT_INITIALIZE
- 711
|
RasMan initialization failure. Check the event log.
|
- ERROR_BIPLEX_PORT_NOT_AVAILABLE
- 712
|
The two-way port is initializing. Wait a few seconds and redial.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_NO_ACTIVE_ISDN_LINES
- 713
|
No active ISDN lines are available.
|
- ERROR_NO_ISDN_CHANNELS_AVAILABLE
- 714
|
No ISDN channels are available to make the call.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_TOO_MANY_LINE_ERRORS
- 715
|
Too many errors occurred because of poor phone line quality.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_IP_CONFIGURATION
- 716
|
The remote access IP configuration is unusable.
|
- ERROR_NO_IP_ADDRESSES
- 717
|
No IP addresses are available in the static pool of remote access IP addresses.
|
- ERROR_PPP_TIMEOUT
- 718
|
A PPP timeout occurred.
|
- ERROR_PPP_REMOTE_TERMINATED
- 719
|
The connection was terminated by the remote computer.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_PPP_NO_PROTOCOLS_CONFIGURED
- 720
|
No PPP control protocols are configured.
|
- ERROR_PPP_NO_RESPONSE
- 721
|
The remote PPP peer is not responding.
|
- ERROR_PPP_INVALID_PACKET
- 722
|
The PPP packet is not valid.
|
- ERROR_PHONE_NUMBER_TOO_LONG
- 723
|
The phone number, including the prefix and suffix, is too long.
|
- ERROR_IPXCP_NO_DIALOUT_CONFIGURED
- 724
|
The IPX protocol cannot dial out on the modem (or other connecting device) because this computer is not configured for dialing out (it is an IPX router).
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_IPXCP_NO_DIALIN_CONFIGURED
- 725
|
The IPX protocol cannot dial in on the modem (or other connecting device) because this computer is not configured for dialing in (the IPX router is not installed).
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_IPXCP_DIALOUT_ALREADY_ACTIVE
- 726
|
The IPX protocol cannot be used for dial-out on more than one port at a time.
|
- ERROR_ACCESSING_TCPCFGDLL
- 727
|
Cannot access TCPCFG.DLL.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_NO_IP_RAS_ADAPTER
- 728
|
Cannot find an IP adapter bound to remote access.
|
- ERROR_SLIP_REQUIRES_IP
- 729
|
SLIP cannot be used unless the IP protocol is installed.
|
- ERROR_PROJECTION_NOT_COMPLETE
- 730
|
Computer registration is not complete.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_PROTOCOL_NOT_CONFIGURED
- 731
|
The specified protocol is not configured.
|
- ERROR_PPP_NOT_CONVERGING
- 732
|
The PPP negotiation is not converging.
|
- ERROR_PPP_CP_REJECTED
- 733
|
the PPP control protocol for the specified network protocol is not available on the server.
|
- ERROR_PPP_LCP_TERMINATED
- 734
|
The PPP link control protocol was terminated.
|
- ERROR_PPP_REQUIRED_ADDRESS_REJECTED
- 735
|
The requested address was rejected by the server.
|
- ERROR_PPP_NCP_TERMINATED
- 736
|
The remote computer terminated the control protocol.
|
- ERROR_PPP_LOOPBACK_DETECTED
- 737
|
Loopback detected.
|
- ERROR_PPP_NO_ADDRESS_ASSIGNED
- 738
|
The server did not assign an address.
|
- ERROR_CANNOT_USE_LOGON_CREDENTIALS
- 739
|
The remote server cannot use the Windows NT encrypted password.
|
- ERROR_TAPI_CONFIGURATION
- 740
|
The TAPI devices configured for remote access failed to initialize or were not installed correctly.
|
- ERROR_NO_LOCAL_ENCRYPTION
- 741
|
The local computer does not support encryption.
|
- ERROR_NO_REMOTE_ENCRYPTION
- 742
|
The remote server does not support encryption.
|
- ERROR_REMOTE_REQUIRES_ENCRYPTION
- 743
|
The remote computer requires data encryption.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_IPXCP_NET_NUMBER_CONFLICT
- 744
|
The system cannot use the IPX network number assigned by the remote computer. Additional information is provided in the event log.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_INVALID_SMM
- 745
|
The Session Management Module (SMM) is not valid.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_SMM_UNINITIALIZED
- 746
|
The SMM is uninitialized.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_NO_MAC_FOR_PORT
- 747
|
No MAC for port.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_SMM_TIMEOUT
- 748
|
The SMM timed out.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_BAD_PHONE_NUMBER
- 749
|
A bad phone number was specified.
|
- ERROR_WRONG_MODULE
- 750
|
The wrong SMM was specified.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_INVALID_CALLBACK_NUMBER
- 751
|
The callback number contains a character that is not valid. Only the following 18 characters are allowed: 0 to 9, T, P, W, (, ), -, @, and space.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_SCRIPT_SYNTAX
- 752
|
A syntax error was encountered while processing a script.
|
- ERROR_HANGUP_FAILED
- 753
|
The connection could not be disconnected because it was created by the multi-protocol router.
|
- ERROR_BUNDLE_NOT_FOUND
- 754
|
The system could not find the multi-link bundle.
|
- ERROR_CANNOT_DO_CUSTOMDIAL
- 755
|
The system cannot perform automated dial because this connection has a custom dialer specified.
|
- ERROR_DIAL_ALREADY_IN_PROGRESS
- 756
|
This connection is already being dialed.
|
- ERROR_RASAUTO_CANNOT_INITIALIZE
- 757
|
RAS could not be started automatically. Additional information is provided in the event log.
|
- ERROR_CONNECTION_ALREADY_SHARED
- 758
|
Internet Connection Sharing (ICS) is already enabled on the connection.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_SHARING_CHANGE_FAILED
- 759
|
An error occurred while the existing Internet Connection Sharing settings were being changed.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_SHARING_ROUTER_INSTALL
- 760
|
An error occurred while routing capabilities were being enabled.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_SHARE_CONNECTION_FAILED
- 761
|
An error occurred while Internet Connection Sharing was being enabled for the connection.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- 7ERROR_SHARING_PRIVATE_INSTALL64
- 762
|
An error occurred while the local network was being configured for sharing.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_CANNOT_SHARE_CONNECTION
- 763
|
Internet Connection Sharing cannot be enabled. There is more than one LAN connection other than the connection to be shared.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_NO_SMART_CARD_READER
- 764
|
No smart card reader is installed.
|
- ERROR_SHARING_ADDRESS_EXISTS
- 765
|
Internet Connection Sharing cannot be enabled. A LAN connection is already configured with the IP address that is required for automatic IP addressing.
|
- ERROR_NO_CERTIFICATE
- 766
|
A certificate could not be found. Connections that use the L2TP protocol over IPSec require the installation of a machine certificate, also known as a computer certificate.
|
- ERROR_SHARING_MULTIPLE_ADDRESSES
- 767
|
Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network has more than one IP address configured. Please reconfigure the LAN connection with a single IP address before enabling Internet Connection Sharing.
|
- ERROR_FAILED_TO_ENCRYPT
- 768
|
The connection attempt failed because of failure to encrypt data.
|
- ERROR_BAD_ADDRESS_SPECIFIED
- 769
|
The specified destination is not reachable.
|
- ERROR_CONNECTION_REJECT
- 770
|
The remote computer rejected the connection attempt.
|
- ERROR_CONGESTION
- 771
|
The connection attempt failed because the network is busy.
|
- ERROR_INCOMPATIBLE
- 772
|
The remote computer's network hardware is incompatible with the type of call requested.
|
- ERROR_NUMBERCHANGED
- 773
|
The connection attempt failed because the destination number has changed.
|
- ERROR_TEMPFAILURE
- 774
|
The connection attempt failed because of a temporary failure. Try connecting again.
|
- ERROR_BLOCKED
- 775
|
The call was blocked by the remote computer.
|
- ERROR_DONOTDISTURB
- 776
|
The call could not be connected because the remote computer has invoked the Do Not Disturb feature.
|
- ERROR_OUTOFORDER
- 777
|
The connection attempt failed because the modem or other connection device on the remote computer is out of order.
|
- ERROR_UNABLE_TO_AUTHENTICATE_SERVER
- 778
|
It was not possible to verify the identity of the server.
|
- ERROR_SMART_CARD_REQUIRED
- 779
|
To dial out using this connection you must use a smart card.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_INVALID_FUNCTION_FOR_ENTRY
- 780
|
An attempted function is not valid for this connection.
|
- ERROR_CERT_FOR_ENCRYPTION_NOT_FOUND
- 781
|
The encryption attempt failed because no valid certificate was found.
[!Note]
Deprecated in Windows Vista and later versions of Windows.
|
- ERROR_SHARING_RRAS_CONFLICT
- 782
|
Connection Sharing (NAT) is currently installed as a routing protocol, and must be removed before enabling Internet Connection Sharing.
|
- ERROR_SHARING_NO_PRIVATE_LAN
- 783
|
Internet Connection Sharing cannot be enabled. The LAN connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling Internet Connection Sharing.
|
- ERROR_NO_DIFF_USER_AT_LOGON
- 784
|
You cannot dial using this connection at login time because it is configured to use a user name different than the one on the smart card. If you want to use this connection at login time, you must configure it to use the user name on the smart card.
|
- ERROR_NO_REG_CERT_AT_LOGON
- 785
|
You cannot dial using this connection at login time because it is not configured to use a smart card. If you want to use it at login time, you must edit the properties of this connection so that it uses a smart card.
|
- ERROR_OAKLEY_NO_CERT
- 786
|
The L2TP connection attempt failed because there is no valid machine certificate on your computer for security authentication.
|
- ERROR_OAKLEY_AUTH_FAIL
- 787
|
The L2TP connection attempt failed because the security layer could not authenticate the remote computer.
|
- ERROR_OAKLEY_ATTRIB_FAIL
- 788
|
The L2TP connection attempt failed because the security layer could not negotiate compatible parameters with the remote computer.
|
- ERROR_OAKLEY_GENERAL_PROCESSING
- 789
|
The L2TP connection attempt failed because the security layer encountered a processing error during initial negotiations with the remote computer.
|
- ERROR_OAKLEY_NO_PEER_CERT
- 790
|
The L2TP connection attempt failed because certificate validation on the remote computer failed.
|
- ERROR_OAKLEY_NO_POLICY
- 791
|
The L2TP connection attempt failed because security policy for the connection was not found.
|
- ERROR_OAKLEY_TIMED_OUT
- 792
|
The L2TP connection attempt failed because security negotiation timed out.
|
- ERROR_OAKLEY_ERROR
- 793
|
The L2TP connection attempt failed because an error occurred while negotiating security.
|
- ERROR_UNKNOWN_FRAMED_PROTOCOL
- 794
|
The Framed Protocol RADIUS attribute for this user is not PPP.
|
- ERROR_WRONG_TUNNEL_TYPE
- 795
|
The Tunnel Type RADIUS attribute for this user is not correct.
|
- ERROR_UNKNOWN_SERVICE_TYPE
- 796
|
The Service Type RADIUS attribute for this user is neither Framed nor Callback Framed.
|
- ERROR_CONNECTING_DEVICE_NOT_FOUND
- 797
|
A connection to the remote computer could not be established because the modem was not found or was busy.
|
- ERROR_NO_EAPTLS_CERTIFICATE
- 798
|
A certificate could not be found that can be used with the Extensible Authentication Protocol (EAP).
|
- ERROR_SHARING_HOST_ADDRESS_CONFLICT
- 799
|
Internet Connection Sharing (ICS) cannot be enabled due to an IP address conflict on the network. ICS requires the host be configured to use 192.168.0.1. Ensure that no other client on the network is configured to use 192.168.0.1.
[!Note]
Supported in Windows XP and later versions of Windows.
[!Note]
Windows 7 and later: The host must be configured to use 192.168.137.1
|
- ERROR_AUTOMATIC_VPN_FAILED
- 800
|
Unable to establish the VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection.
[!Note]
Supported in Windows XP and later versions of Windows.
|
- ERROR_VALIDATING_SERVER_CERT
- 801
|
This connection is configured to validate the identity of the access server, but Windows cannot verify the digital certificate sent by the server.
[!Note]
Supported in Windows XP and later versions of Windows.
|
- ERROR_READING_SCARD
- 802
|
The card supplied was not recognized. Please check that the card is inserted correctly, and fits securely.
[!Note]
Supported in Windows XP with SP1 and later versions of Windows.
|
- ERROR_INVALID_PEAP_COOKIE_CONFIG
- 803
|
The PEAP configuration stored in the session cookie does not match the current session configuration.
[!Note]
Supported in Windows XP with SP1 and later versions of Windows.
|
- ERROR_INVALID_PEAP_COOKIE_USER
- 804
|
The PEAP identity stored in the session cookie does not match the current identity.
[!Note]
Supported in Windows XP with SP1 and later versions of Windows.
|
- ERROR_INVALID_MSCHAPV2_CONFIG
- 805
|
You cannot dial using this connection at login time because it is configured to use the currently-logged-in user's credentials.
[!Note]
Supported in Windows XP with SP1 and later versions of Windows.
|
- ERROR_VPN_GRE_BLOCKED
- 806
|
A connection between your computer and the VPN server has been started, but the VPN connection cannot be completed. The most common cause for this is that at least one Internet device (for example, a firewall or a router) between your computer and the VPN server is not configured to allow Generic Routing Encapsulation (GRE) protocol packets.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_VPN_DISCONNECT
- 807
|
The network connection between your computer and the VPN server was interrupted. This can be caused by a problem in the VPN transmission and is commonly the result of internet latency or simply that your VPN server has reached capacity. Try to reconnect to the VPN server.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_VPN_REFUSED
- 808
|
The network connection between your computer and the VPN server could not be established because the remote server refused the connection. This is typically caused by a mismatch between the server's configuration and your connection settings.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_VPN_TIMEOUT
- 809
|
The network connection between your computer and the VPN server could not be established because the remote server is not responding. This could be because one of the network devices (for example, firewalls, NAT, routers) between your computer and the remote server is not configured to allow VPN connections.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_VPN_BAD_CERT
- 810
|
A network connection between your computer and the VPN server was started, but the VPN connection was not completed. This is typically caused by the use of an incorrect or expired certificate for authentication between the client and the server.
[!Note]
Supported in Windows Vista and later versions of Windows
|
- ERROR_VPN_BAD_PSK
- 811
|
The network connection between your computer and the VPN server could not be established because the remote server is not responding. This is typically caused by a pre-shared key problem between the client and server. A pre-shared key is used to guarantee you are who you say you are in an IP Security (IPSec) communication cycle.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_SERVER_POLICY
- 812
|
The connection was prevented because of a policy configured on your RAS/VPN server. Specifically, the authentication method used by the server to verify your username and password may not match the authentication method configured in your connection profile.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_BROADBAND_ACTIVE
- 813
|
You have attempted to establish a second broadband connection while a previous broadband connection is already established using the same device or port.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_BROADBAND_NO_NIC
- 814
|
The underlying Ethernet connectivity required for the broadband connection was not found.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_BROADBAND_TIMEOUT
- 815
|
The broadband network connection could not be established on your computer because the remote server is not responding. This could be caused by a value that is not valid for the 'Service Name' field for this connection.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_FEATURE_DEPRECATED
- 816
|
A feature or setting you have tried to enable is no longer supported by the remote access service.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_CANNOT_DELETE
- 817
|
Cannot delete a connection while it is connected.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_RASQEC_RESOURCE_CREATION_FAILED
- 818
|
The Network Access Protection (NAP) enforcement client could not create system resources for remote access connections. Some network services or resources might not be available.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_RASQEC_NAPAGENT_NOT_ENABLED
- 819
|
The Network Access Protection Agent (NAP Agent) service has been disabled or is not installed on this computer. Some network services or resources might not be available.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_RASQEC_NAPAGENT_NOT_CONNECTED
- 820
|
The Network Access Protection (NAP) enforcement client failed to register with the Network Access Protection Agent (NAP Agent) service. Some network services or resources might not be available.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_RASQEC_CONN_DOESNOTEXIST
- 821
|
The Network Access Protection (NAP) enforcement client was unable to process the request because the remote access connection does not exist.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_RASQEC_TIMEOUT
- 822
|
The Network Access Protection (NAP) enforcement client did not respond. Some network services or resources might not be available.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_PEAP_CRYPTOBINDING_INVALID
- 823
|
The Crypto-Binding type-length-value (TLV) received is not valid.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_PEAP_CRYPTOBINDING_NOTRECEIVED
- 824
|
Crypto-Binding TLV was not received.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_INVALID_VPNSTRATEGY
- 825
|
Point-to-Point Tunneling Protocol (PPTP) is incompatible with IPv6. Change the type of virtual private network to Layer Two Tunneling Protocol (L2TP).
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_EAPTLS_CACHE_CREDENTIALS_INVALID
- 826
|
EAPTLS validation of the cached credentials failed. Discard cached credentials.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_IPSEC_SERVICE_STOPPED
- 827
|
The L2TP/IPsec connection cannot be completed because the IKE and AuthIP IPSec Keying Modules service and/or the Base Filtering Engine service is not running. These services are required to establish an L2TP/IPSec connection.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_IDLE_TIMEOUT
- 828
|
The connection was terminated because of idle timeout.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_LINK_FAILURE
- 829
|
The modem (or other connecting device) was disconnected due to link failure.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_USER_LOGOFF
- 830
|
The connection was terminated because user logged off.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_FAST_USER_SWITCH
- 831
|
The connection was terminated because user switch happened.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_HIBERNATION
- 832
|
The connection was terminated because of hibernation.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_SYSTEM_SUSPENDED
- 833
|
The connection was terminated because the system got suspended.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_RASMAN_SERVICE_STOPPED
- 834
|
The connection was terminated because Remote Access Connection manager stopped.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_INVALID_SERVER_CERT
- 835
|
The L2TP connection attempt failed because the security layer could not authenticate the remote computer. This could be because one or more fields of the certificate presented by the remote server could not be validated as belonging to the target destination.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_NOT_NAP_CAPABLE
- 836
|
The machine is not NAP capable.
[!Note]
Supported in Windows Vista and later versions of Windows.
|
- ERROR_INVALID_TUNNELID
- 837
|
Invalid Tunnel ID.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_UPDATECONNECTION_REQUEST_IN_PROCESS
- 838
|
Another update connection request is in progress. RAS allows only one update connection request at a time.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_PROTOCOL_ENGINE_DISABLED
- 839
|
Negotiating using configured protocol is disable. Edit connection properties and select different protocol for negotiation and try again.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_INTERNAL_ADDRESS_FAILURE
- 840
|
Internal address negotiation failed.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_FAILED_CP_REQUIRED
- 841
|
Client has to request an Internal IPv4 or IPv6 address.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_TS_UNACCEPTABLE
- 842
|
Traffic Selectors negotiation failed.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_MOBIKE_DISABLED
- 843
|
Mobility is disabled for this connection.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_CANNOT_INITIATE_MOBIKE_UPDATE
- 844
|
The VPN Connection is still connecting or re-authenticating because of Quarantine state change. Initiate mobile update only when connection state is 'Connected'.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_PEAP_SERVER_REJECTED_CLIENT_TLV
- 845
|
Server rejected client authentication, due to unexpected TLV or value mismatch for a TLV.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_INVALID_PREFERENCES
- 846
|
Either VPN destination preference is not selected by the user or it is no longer valid.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_EAPTLS_SCARD_CACHE_CREDENTIALS_INVALID
- 847
|
Cached smart card credential is invalid.
[!Note]
Supported in Windows 7 and later versions of Windows.
|
- ERROR_SSTP_COOKIE_SET_FAILURE
- 848
|
VPN connection attempt failed due to internal error occurred while adding cookies to the Secure Socket Tunneling Protocol (SSTP). Please see the System Event Log for the detailed information.
|
- ERROR_INVALID_PEAP_COOKIE_ATTRIBUTES
- 849
|
The PEAP inner method attribute(s) stored in the cookie is/are invalid.
|
- ERROR_EAP_METHOD_NOT_INSTALLED
- 850
|
The Extensible Authentication Protocol type required for authentication of the remote access connection is not installed on your computer.
|
- ERROR_EAP_METHOD_DOES_NOT_SUPPORT_SSO
- 851
|
The Extensible Authentication Protocol type configured on the remote access connection does not support single sign-on.
|
- ERROR_EAP_METHOD_OPERATION_NOT_SUPPORTED
- 852
|
The Extensible Authentication Protocol type configured on the remote access connection does not support the requested operation.
|
- ERROR_EAP_USER_CERT_INVALID
- 853
|
The remote access connection completed, but authentication failed because the certificate that authenticates the client to the server is not valid. Ensure that the certificate used for authentication is valid.
|
- ERROR_EAP_USER_CERT_EXPIRED
- 854
|
The remote access connection completed, but authentication failed because the certificate that authenticates the client to the server is expired. Renew the certificate.
|
- ERROR_EAP_USER_CERT_REVOKED
- 855
|
The remote access connection completed, but authentication failed because the certificate that authenticates the client to the server is revoked. Use a certificate that has not been revoked.
|
- ERROR_EAP_USER_CERT_OTHER_ERROR
- 856
|
The remote access connection completed, but authentication failed because of an error in the certificate that authenticates the client to the server.
|
- ERROR_EAP_SERVER_CERT_INVALID
- 857
|
The remote access connection completed, but authentication failed because the certificate that the client uses to authenticate the server is not valid.
|
- ERROR_EAP_SERVER_CERT_EXPIRED
- 858
|
The remote access connection completed, but authentication failed because the certificate that the client uses to authenticate the server is expired.
|
- ERROR_EAP_SERVER_CERT_REVOKED
- 859
|
The remote access connection completed, but authentication failed because the certificate that the client uses to authenticate the server is revoked.
|
- ERROR_EAP_SERVER_CERT_OTHER_ERROR
- 860
|
The remote access connection completed, but authentication failed because of an error in the certificate that the client uses to authenticate the server.
|
- ERROR_EAP_USER_ROOT_CERT_NOT_FOUND
- 861
|
The remote access connection completed, but authentication failed because a trusted root certificate that validates the user certificate was not found in the Trusted Root Certification Authorities certificate store.
|
- ERROR_EAP_USER_ROOT_CERT_INVALID
- 862
|
The remote access connection completed, but authentication failed because the trusted root certificate that is used to validate the user certificate is not valid.
|
- ERROR_EAP_USER_ROOT_CERT_EXPIRED
- 863
|
The remote access connection completed, but authentication failed because the certificate in the Trusted Root Certification Authorities certificate store that authenticates the user certificate is expired. Renew the certificate.
|
- ERROR_EAP_SERVER_ROOT_CERT_NOT_FOUND
- 864
|
The remote access connection completed, but authentication failed because a certificate that validates the server certificate was not found in the Trusted Root Certification Authorities certificate store.
|
- ERROR_EAP_SERVER_ROOT_CERT_INVALID
- 865
|
The remote access connection completed, but authentication failed because the certificate in the Trusted Root Certification Authorities certificate store that validates the server certificate is not valid.
|
- ERROR_EAP_SERVER_ROOT_CERT_NAME_REQUIRED
- 866
|
The remote access connection completed, but authentication failed because the certificate on the server computer does not have a server name specified.
|
- ERROR_PEAP_IDENTITY_MISMATCH
- 867
|
The PEAP outer identity is not same as the inner identity when identity privacy is turned OFF.
|
- ERROR_DNSNAME_NOT_RESOLVABLE
- 868
|
The remote connection was not made because the name of the remote access server did not resolve.
|
- ERROR_EAPTLS_PASSWD_INVALID
- 869
|
The password provided for the certificate is not valid.
|
- ERROR_IKEV2_PSK_INTERFACE_ALREADY_EXISTS
- 870
|
The interface could not be enabled because more than one interface with the same destination has been created with the pre-shared key authentication method. Change the destination/auth method and enable the interface.
|