FileInfo.CopyTo Méthode

Référence

Définition

Espace de noms:: System.IO

Assemblys:: mscorlib.dll, System.IO.FileSystem.dll

Assembly:: System.IO.FileSystem.dll

Assembly:: System.Runtime.dll

Assembly:: mscorlib.dll

Assembly:: netstandard.dll

Important

Certaines informations portent sur la préversion du produit qui est susceptible d’être en grande partie modifiée avant sa publication. Microsoft exclut toute garantie, expresse ou implicite, concernant les informations fournies ici.

Copie un fichier existant vers un nouveau fichier.

Surcharges

CopyTo(String)	Copie un fichier existant vers un nouveau fichier, en interdisant le remplacement d'un fichier existant.
CopyTo(String, Boolean)	Copie un fichier existant vers un nouveau fichier, en autorisant le remplacement d'un fichier existant.

CopyTo(String)

Copie un fichier existant vers un nouveau fichier, en interdisant le remplacement d'un fichier existant.

public:
 System::IO::FileInfo ^ CopyTo(System::String ^ destFileName);

public System.IO.FileInfo CopyTo (string destFileName);

member this.CopyTo : string -> System.IO.FileInfo

Public Function CopyTo (destFileName As String) As FileInfo

Paramètres

destFileName: String

Nom du nouveau fichier de destination de la copie.

Retours

FileInfo

Nouveau fichier avec un chemin d'accès qualifié complet.

Exceptions

ArgumentException

.NET Framework et les versions .NET Core antérieures à 2.1 : destFileName est vide, contient uniquement des espaces blancs ou contient des caractères non valides.

IOException

Une erreur se produit ou le fichier de destination existe déjà.

SecurityException

L'appelant n'a pas l'autorisation requise.

ArgumentNullException

destFileName a la valeur null.

UnauthorizedAccessException

Un chemin de répertoire est passé ou le fichier est déplacé vers un autre lecteur.

DirectoryNotFoundException

Le répertoire spécifié dans destFileName n’existe pas.

PathTooLongException

Le chemin et/ou le nom de fichier spécifiés dépassent la longueur maximale définie par le système.

NotSupportedException

destFileName contient un deux-points (:) dans la chaîne mais ne spécifie pas le volume.

Exemples

L’exemple suivant illustre les deux surcharges de la CopyTo méthode.

using namespace System;
using namespace System::IO;

int main()
{
   String^ path = "c:\\MyTest.txt";
   String^ path2 = "c:\\MyTest.txttemp";
   FileInfo^ fi1 = gcnew FileInfo( path );
   FileInfo^ fi2 = gcnew FileInfo( path2 );
   try
   {
      // Create the file and clean up handles.
      FileStream^ fs = fi1->Create();
      if ( fs )
         delete (IDisposable^)fs;
      
      //Ensure that the target does not exist.
      fi2->Delete();
      
      //Copy the file.
      fi1->CopyTo( path2 );
      Console::WriteLine( "{0} was copied to {1}.", path, path2 );
      
      //Try to copy it again, which should succeed.
      fi1->CopyTo( path2, true );
      Console::WriteLine( "The second Copy operation succeeded, which is expected." );
   }
   catch ( Exception^ ) 
   {
      Console::WriteLine( "Double copying was not allowed, which is not expected." );
   }
}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//The second Copy operation succeeded, which is expected.

using System;
using System.IO;

class Test
{

    public static void Main()
    {
        string path = @"c:\SoureFile.txt";
        string path2 = @"c:\NewFile.txt";
        FileInfo fi1 = new FileInfo(path);
        FileInfo fi2 = new FileInfo(path2);

        try
        {
            // Create the source file.
            using (FileStream fs = fi1.Create()) { }

            //Ensure that the target file does not exist.
            if (File.Exists(path2))
            {
                fi2.Delete();
            }

            //Copy the file.f
            fi1.CopyTo(path2);
            Console.WriteLine("{0} was copied to {1}.", path, path2);
        }
        catch (IOException ioex)
        {
            Console.WriteLine(ioex.Message);
        }
    }
}

Imports System.IO

Public Class Test

    Public Shared Sub Main()
        'Specify the directories you want to manipulate.
        Dim path As String = "c:\SourceFile.txt"
        Dim path2 As String = "c:\NewFile.txt"
        Dim fi As FileInfo = New FileInfo(path)
        Dim fi2 As FileInfo = New FileInfo(path2)

        Try
            Using fs As FileStream = fi.Create()
            End Using

            'Ensure that the target does not exist.
            If File.Exists(path2) Then
                fi2.Delete()
            End If
            
            'Copy the file.
            fi.CopyTo(path2)
            Console.WriteLine("{0} was copied to {1}.", path, path2)

        Catch ioex As IOException
            Console.WriteLine(ioex.Message)
        End Try
    End Sub
End Class

L’exemple suivant illustre la copie d’un fichier dans un autre fichier, lève une exception si le fichier de destination existe déjà.

using namespace System;
using namespace System::IO;
int main()
{
   try
   {
      
      // Create a reference to a file, which might or might not exist.
      // If it does not exist, it is not yet created.
      FileInfo^ fi = gcnew FileInfo( "temp.txt" );
      
      // Create a writer, ready to add entries to the file.
      StreamWriter^ sw = fi->AppendText();
      sw->WriteLine( "Add as many lines as you like..." );
      sw->WriteLine( "Add another line to the output..." );
      sw->Flush();
      sw->Close();
      
      // Get the information out of the file and display it.
      StreamReader^ sr = gcnew StreamReader( fi->OpenRead() );
      Console::WriteLine( "This is the information in the first file:" );
      while ( sr->Peek() != -1 )
            Console::WriteLine( sr->ReadLine() );
      
      // Copy this file to another file. The file will not be overwritten if it already exists.
      FileInfo^ newfi = fi->CopyTo( "newTemp.txt" );
      
      // Get the information out of the new file and display it.* sr = new StreamReader(newfi->OpenRead());
      Console::WriteLine( "{0}This is the information in the second file:", Environment::NewLine );
      while ( sr->Peek() != -1 )
            Console::WriteLine( sr->ReadLine() );
   }
   catch ( Exception^ e ) 
   {
      Console::WriteLine( e->Message );
   }

}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...
//
//This is the information in the second file:

using System;
using System.IO;

public class CopyToTest
{
    public static void Main()
    {
        try
        {
            // Create a reference to a file, which might or might not exist.
            // If it does not exist, it is not yet created.
            FileInfo fi = new FileInfo("temp.txt");
            // Create a writer, ready to add entries to the file.
            StreamWriter sw = fi.AppendText();
            sw.WriteLine("Add as many lines as you like...");
            sw.WriteLine("Add another line to the output...");
            sw.Flush();
            sw.Close();
            // Get the information out of the file and display it.
            StreamReader sr = new StreamReader(fi.OpenRead());
            Console.WriteLine("This is the information in the first file:");
            while (sr.Peek() != -1)
                Console.WriteLine(sr.ReadLine());
            // Copy this file to another file. The file will not be overwritten if it already exists.
            FileInfo newfi = fi.CopyTo("newTemp.txt");
            // Get the information out of the new file and display it.
            sr = new StreamReader(newfi.OpenRead());
            Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine);
            while (sr.Peek() != -1)
                Console.WriteLine(sr.ReadLine());
        }
        catch(Exception e)
        {
            Console.WriteLine(e.Message);
        }
    }
}
//This code produces output similar to the following;
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...

//This is the information in the second file:
//Add as many lines as you like...
//Add another line to the output...

Imports System.IO

Public Class CopyToTest
    Public Shared Sub Main()
        Try
            ' Create a reference to a file, which might or might not exist.
            ' If it does not exist, it is not yet created.
            Dim fi As New FileInfo("temp.txt")
            ' Create a writer, ready to add entries to the file.
            Dim sw As StreamWriter = fi.AppendText()
            sw.WriteLine("Add as many lines as you like...")
            sw.WriteLine("Add another line to the output...")
            sw.Flush()
            sw.Close()
            ' Get the information out of the file and display it.
            Dim sr As New StreamReader(fi.OpenRead())
            Console.WriteLine("This is the information in the first file:")
            While sr.Peek() <> -1
                Console.WriteLine(sr.ReadLine())
            End While
            ' Copy this file to another file.
            Dim newfi As FileInfo = fi.CopyTo("newTemp.txt")
            ' Get the information out of the new file and display it.
            sr = New StreamReader(newfi.OpenRead())
            Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine)
            While sr.Peek() <> -1
                Console.WriteLine(sr.ReadLine())
            End While
        Catch e As Exception
            Console.WriteLine(e.Message)
        End Try
    End Sub
End Class
'This code produces output similar to the following; 
'results may vary based on the computer/file structure/etc.:
'
'This is the information in the first file:
'Add as many lines as you like...
'Add another line to the output...
'
'This is the information in the second file:
'Add as many lines as you like...
'Add another line to the output...

Remarques

Utilisez la méthode pour autoriser la CopyTo(String, Boolean) remplacement d’un fichier existant.

Attention

Dans la mesure du possible, évitez d’utiliser des noms de fichiers courts (par exemple XXXXXX~1.XXX) avec cette méthode. Si deux fichiers ont des noms de fichiers courts équivalents, cette méthode peut échouer et déclencher une exception et/ou entraîner un comportement indésirable

Voir aussi

S’applique à

CopyTo(String, Boolean)

Copie un fichier existant vers un nouveau fichier, en autorisant le remplacement d'un fichier existant.

public:
 System::IO::FileInfo ^ CopyTo(System::String ^ destFileName, bool overwrite);

public System.IO.FileInfo CopyTo (string destFileName, bool overwrite);

member this.CopyTo : string * bool -> System.IO.FileInfo

Public Function CopyTo (destFileName As String, overwrite As Boolean) As FileInfo

Paramètres

destFileName: String

Nom du nouveau fichier de destination de la copie.

overwrite: Boolean

true pour autoriser le remplacement d'un fichier existant ; sinon, false.

Retours

FileInfo

Nouveau fichier ou remplacement d'un fichier existant si overwrite est défini à true. Si le fichier existe et que overwrite est défini à false, une exception IOException est levée.

Exceptions

ArgumentException

.NET Framework et les versions .NET Core antérieures à 2.1 : destFileName est vide, contient uniquement des espaces blancs ou contient des caractères non valides.

IOException

Une erreur se produit, ou le fichier de destination existe déjà et overwrite a la valeur false.

SecurityException

L'appelant n'a pas l'autorisation requise.

ArgumentNullException

destFileName a la valeur null.

DirectoryNotFoundException

Le répertoire spécifié dans destFileName n’existe pas.

UnauthorizedAccessException

Un chemin de répertoire est passé ou le fichier est déplacé vers un autre lecteur.

PathTooLongException

Le chemin et/ou le nom de fichier spécifiés dépassent la longueur maximale définie par le système.

NotSupportedException

destFileName contient un signe deux-points (:) au milieu de la chaîne.

Exemples

L’exemple suivant illustre les deux surcharges de la CopyTo méthode.

using namespace System;
using namespace System::IO;

int main()
{
   String^ path = "c:\\MyTest.txt";
   String^ path2 = "c:\\MyTest.txttemp";
   FileInfo^ fi1 = gcnew FileInfo( path );
   FileInfo^ fi2 = gcnew FileInfo( path2 );
   try
   {
      // Create the file and clean up handles.
      FileStream^ fs = fi1->Create();
      if ( fs )
         delete (IDisposable^)fs;
      
      //Ensure that the target does not exist.
      fi2->Delete();
      
      //Copy the file.
      fi1->CopyTo( path2 );
      Console::WriteLine( "{0} was copied to {1}.", path, path2 );
      
      //Try to copy it again, which should succeed.
      fi1->CopyTo( path2, true );
      Console::WriteLine( "The second Copy operation succeeded, which is expected." );
   }
   catch ( Exception^ ) 
   {
      Console::WriteLine( "Double copying was not allowed, which is not expected." );
   }
}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//The second Copy operation succeeded, which is expected.

using System;
using System.IO;

class Test
{

    public static void Main()
    {
        string path = @"c:\SoureFile.txt";
        string path2 = @"c:\NewFile.txt";
        FileInfo fi1 = new FileInfo(path);
        FileInfo fi2 = new FileInfo(path2);

        try
        {
            // Create the source file.
            using (FileStream fs = fi1.Create()) { }

            //Ensure that the target file does not exist.
            if (File.Exists(path2))
            {
                fi2.Delete();
            }

            //Copy the file.f
            fi1.CopyTo(path2);
            Console.WriteLine("{0} was copied to {1}.", path, path2);
        }
        catch (IOException ioex)
        {
            Console.WriteLine(ioex.Message);
        }
    }
}

Imports System.IO

Public Class Test

    Public Shared Sub Main()
        'Specify the directories you want to manipulate.
        Dim path As String = "c:\SourceFile.txt"
        Dim path2 As String = "c:\NewFile.txt"
        Dim fi As FileInfo = New FileInfo(path)
        Dim fi2 As FileInfo = New FileInfo(path2)

        Try
            Using fs As FileStream = fi.Create()
            End Using

            'Ensure that the target does not exist.
            If File.Exists(path2) Then
                fi2.Delete()
            End If
            
            'Copy the file.
            fi.CopyTo(path2)
            Console.WriteLine("{0} was copied to {1}.", path, path2)

        Catch ioex As IOException
            Console.WriteLine(ioex.Message)
        End Try
    End Sub
End Class

L’exemple suivant illustre la copie d’un fichier dans un autre fichier, en spécifiant s’il faut remplacer un fichier déjà existant.

using namespace System;
using namespace System::IO;
int main()
{
   
   // Create a reference to a file, which might or might not exist.
   // If it does not exist, it is not yet created.
   FileInfo^ fi = gcnew FileInfo( "temp.txt" );
   
   // Create a writer, ready to add entries to the file.
   StreamWriter^ sw = fi->AppendText();
   sw->WriteLine( "Add as many lines as you like..." );
   sw->WriteLine( "Add another line to the output..." );
   sw->Flush();
   sw->Close();
   
   // Get the information out of the file and display it.
   StreamReader^ sr = gcnew StreamReader( fi->OpenRead() );
   Console::WriteLine( "This is the information in the first file:" );
   while ( sr->Peek() != -1 )
      Console::WriteLine( sr->ReadLine() );

   
   // Copy this file to another file. The true parameter specifies
   // that the file will be overwritten if it already exists.
   FileInfo^ newfi = fi->CopyTo( "newTemp.txt", true );
   
   // Get the information out of the new file and display it.* sr = new StreamReader( newfi->OpenRead() );
   Console::WriteLine( "{0}This is the information in the second file:", Environment::NewLine );
   while ( sr->Peek() != -1 )
      Console::WriteLine( sr->ReadLine() );
}
//This code produces output similar to the following; 
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...
//This is the information in the second file:
//

using System;
using System.IO;

public class CopyToTest
{
    public static void Main()
    {
        // Create a reference to a file, which might or might not exist.
        // If it does not exist, it is not yet created.
        FileInfo fi = new FileInfo("temp.txt");
        // Create a writer, ready to add entries to the file.
        StreamWriter sw = fi.AppendText();
        sw.WriteLine("Add as many lines as you like...");
        sw.WriteLine("Add another line to the output...");
        sw.Flush();
        sw.Close();
        // Get the information out of the file and display it.
        StreamReader sr = new StreamReader( fi.OpenRead() );
        Console.WriteLine("This is the information in the first file:");
        while (sr.Peek() != -1)
            Console.WriteLine( sr.ReadLine() );
        // Copy this file to another file. The true parameter specifies
        // that the file will be overwritten if it already exists.
        FileInfo newfi = fi.CopyTo("newTemp.txt", true);
        // Get the information out of the new file and display it.
        sr = new StreamReader( newfi.OpenRead() );
        Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine);
        while (sr.Peek() != -1)
            Console.WriteLine( sr.ReadLine() );
    }
}
//This code produces output similar to the following;
//results may vary based on the computer/file structure/etc.:
//
//This is the information in the first file:
//Add as many lines as you like...
//Add another line to the output...
//Add as many lines as you like...
//Add another line to the output...

//This is the information in the second file:
//Add as many lines as you like...
//Add another line to the output...
//Add as many lines as you like...
//Add another line to the output...

Imports System.IO

Public Class CopyToTest
    Public Shared Sub Main()
        ' Create a reference to a file, which might or might not exist.
        ' If it does not exist, it is not yet created.
        Dim fi As New FileInfo("temp.txt")
        ' Create a writer, ready to add entries to the file.
        Dim sw As StreamWriter = fi.AppendText()
        sw.WriteLine("Add as many lines as you like...")
        sw.WriteLine("Add another line to the output...")
        sw.Flush()
        sw.Close()
        ' Get the information out of the file and display it.
        Dim sr As New StreamReader(fi.OpenRead())
        Console.WriteLine("This is the information in the first file:")
        While sr.Peek() <> -1
            Console.WriteLine(sr.ReadLine())
        End While
        ' Copy this file to another file. The true parameter specifies 
        ' that the file will be overwritten if it already exists.
        Dim newfi As FileInfo = fi.CopyTo("newTemp.txt", True)
        ' Get the information out of the new file and display it.
        sr = New StreamReader(newfi.OpenRead())
        Console.WriteLine("{0}This is the information in the second file:", Environment.NewLine)
        While sr.Peek() <> -1
            Console.WriteLine(sr.ReadLine())
        End While
    End Sub
End Class
'This code produces output similar to the following; 
'results may vary based on the computer/file structure/etc.:
'
'This is the information in the first file:
'Add as many lines as you like...
'Add another line to the output...
'
'This is the information in the second file:
'Add as many lines as you like...
'Add another line to the output...
'

Remarques

Utilisez cette méthode pour autoriser ou empêcher l’écriture d’un fichier existant. Utilisez la méthode pour empêcher la CopyTo(String) remplacement d’un fichier existant par défaut.

Attention

Voir aussi

S’applique à

FileInfo.CopyTo Méthode

Définition

Surcharges

CopyTo(String)

Paramètres

Retours

Exceptions

Exemples

Remarques

Voir aussi

S’applique à

CopyTo(String, Boolean)

Paramètres

Retours

Exceptions

Exemples

Remarques

Voir aussi

S’applique à

Ressources supplémentaires