Perintah CLI klasik Azure
Penting
Komputer virtual klasik akan dihentikan pada 1 Maret 2023.
Jika Anda menggunakan sumber IaaS dari ASM, harap menyelesaikan migrasi sebelum 1 Maret 2023. Kami mendorong Anda untuk beralih lebih cepat untuk memanfaatkan banyak peningkatan fitur di Azure Resource Manager.
Untuk mengetahui informasi selengkapnya, lihat Migrasikan sumber IaaS Anda ke Azure Resource Manager sebelum 1 Maret 2023.
Topik ini menjelaskan cara menginstal Azure classic CLI. CLI klasik tidak digunakan lagi dan hanya boleh digunakan dengan model penyebaran klasik. Untuk semua penyebaran lainnya, gunakan Azure CLI.
Artikel ini menyediakan sintaks dan opsi untuk perintah antarmuka baris perintah (CLI) klasik Azure yang biasa Anda gunakan untuk membuat dan mengelola sumber daya Azure. Ini bukan referensi lengkap, dan versi CLI Anda mungkin menunjukkan perintah atau parameter yang sedikit berbeda.
Untuk memulai, pertama instal CLI klasik Azure dan sambungkan ke langganan Azure Anda.
Untuk sintaks dan opsi perintah saat ini di baris perintah dalam mode Resource Manager, ketik azure help atau, untuk menampilkan bantuan untuk perintah tertentu, azure help [command]. Temukan juga contoh CLI dalam dokumentasi untuk membuat dan mengelola layanan Azure tertentu.
Parameter opsional ditampilkan dalam tanda kurung siku (misalnya, [parameter]). Semua parameter lainnya diperlukan.
Selain parameter opsional khusus perintah yang didokumentasikan di sini, ada tiga parameter opsional yang dapat digunakan untuk menampilkan output terperinci seperti opsi permintaan dan kode status. Parameter -v menyediakan output verbose, dan -vv parameter memberikan output verbose yang lebih rinci. Opsi ini --json menghasilkan hasilnya dalam format json mentah.
Mengatur mode Resource Manager
Gunakan perintah berikut untuk mengaktifkan perintah mode Resource Manager Azure CLI.
azure config mode arm
Catatan
Mode Resource Manager Azure CLI dan mode Azure Service Management saling eksklusif. Artinya, sumber daya yang dibuat dalam satu mode tidak dapat dikelola dari mode lain.
Informasi Akun
Informasi langganan Azure Anda digunakan oleh alat untuk terhubung ke akun Anda.
Mencantumkan langganan yang diimpor
account list [options]
Memperlihatkan detail tentang langganan
account show [options] [subscriptionNameOrId]
Mengatur langganan saat ini
account set [options] <subscriptionNameOrId>
Menghapus langganan atau lingkungan, atau menghapus semua info akun dan lingkungan yang disimpan
account clear [options]
Perintah untuk mengelola lingkungan akun Anda
account env list [options]
account env show [options] [environment]
account env add [options] [environment]
account env set [options] [environment]
account env delete [options] [environment]
Objek Direktori Aktif
Perintah untuk menampilkan aplikasi direktori aktif
ad app create [options]
ad app delete [options] <object-id>
Perintah untuk menampilkan grup direktori aktif
ad group list [options]
ad group show [options]
Perintah untuk memberikan sub grup direktori aktif atau info anggota
ad group member list [options] [objectId]
Perintah untuk menampilkan perwakilan layanan direktori aktif
ad sp list [options]
ad sp show [options]
ad sp create [options] <application-id>
ad sp delete [options] <object-id>
Perintah untuk menampilkan pengguna direktori aktif
ad user list [options]
ad user show [options]
Set ketersediaan
Membuat ketersediaan yang diatur dalam grup sumber daya
availset create [options] <resource-group> <name> <location> [tags]
Mencantumkan set ketersediaan dalam grup sumber daya
availset list [options] <resource-group>
Mendapatkan satu set ketersediaan dalam grup sumber daya
availset show [options] <resource-group> <name>
Menghapus satu set ketersediaan dalam grup sumber daya
availset delete [options] <resource-group> <name>
Pengaturan Lokal
Mencantumkan pengaturan konfigurasi Azure CLI
config list [options]
Menghapus pengaturan konfigurasi
config delete [options] <name>
Memperbarui pengaturan konfigurasi
config set <name> <value>
Mengatur mode kerja Azure CLI ke salah satu arm atau asm
config mode [options] <modename>
Fitur akun
Cantumkan semua fitur yang tersedia untuk langganan Anda
feature list [options]
Memperlihatkan fitur
feature show [options] <providerName> <featureName>
Mendaftarkan fitur pratinjau dari penyedia sumber daya
feature register [options] <providerName> <featureName>
Grup sumber daya
Membuat grup sumber daya
group create [options] <name> <location>
Mengatur tag ke grup sumber daya
group set [options] <name> <tags>
Menghapus grup sumber daya
group delete [options] <name>
Mencantumkan grup sumber daya untuk langganan Anda
group list [options]
Memperlihatkan grup sumber daya untuk langganan Anda
group show [options] <name>
Perintah untuk mengelola log grup sumber daya
group log show [options] [name]
Perintah untuk mengelola penyebaran Anda dalam grup sumber daya
group deployment create [options] [resource-group] [name]
group deployment list [options] <resource-group> [state]
group deployment show [options] <resource-group> [deployment-name]
group deployment stop [options] <resource-group> [deployment-name]
Perintah untuk mengelola templat grup sumber daya lokal atau galeri Anda
group template list [options]
group template show [options] <name>
group template download [options] [name] [file]
group template validate [options] <resource-group>
Kluster HDInsight
Perintah untuk membuat atau menambah file konfigurasi kluster
hdinsight config create [options] <configFilePath> <overwrite>
hdinsight config add-config-values [options] <configFilePath>
hdinsight config add-script-action [options] <configFilePath>
Contoh: Buat file konfigurasi yang berisi tindakan skrip untuk dijalankan saat membuat kluster.
hdinsight config create "C:\myFiles\configFile.config"
hdinsight config add-script-action --configFilePath "C:\myFiles\configFile.config" --nodeType HeadNode --uri <scriptActionURI> --name myScriptAction --parameters "-param value"
Perintah untuk membuat kluster dalam grup sumber daya
hdinsight cluster create [options] <clusterName>
Contoh: Membuat Storm di kluster Linux
azure hdinsight cluster create -g myarmgroup -l westus -y Linux --clusterType Storm --version 3.2 --defaultStorageAccountName mystorageaccount --defaultStorageAccountKey <defaultStorageAccountKey> --defaultStorageContainer mycontainer --userName admin --password <clusterPassword> --sshUserName sshuser --sshPassword <sshPassword> --workerNodeCount 1 myNewCluster01
info: Executing command hdinsight cluster create
+ Submitting the request to create cluster...
info: hdinsight cluster create command OK
Contoh: Membuat kluster dengan tindakan skrip
azure hdinsight cluster create -g myarmgroup -l westus -y Linux --clusterType Hadoop --version 3.2 --defaultStorageAccountName mystorageaccount --defaultStorageAccountKey <defaultStorageAccountKey> --defaultStorageContainer mycontainer --userName admin --password <clusterPassword> --sshUserName sshuser --sshPassword <sshPassword> --workerNodeCount 1 –configurationPath "C:\myFiles\configFile.config" myNewCluster01
info: Executing command hdinsight cluster create
+ Submitting the request to create cluster...
info: hdinsight cluster create command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
-vv more verbose with debug output
--json use json output
-g --resource-group <resource-group> The name of the resource group
-c, --clusterName <clusterName> HDInsight cluster name
-l, --location <location> Data center location for the cluster
-y, --osType <osType> HDInsight cluster operating system
'Windows' or 'Linux'
--version <version> HDInsight cluster version
--clusterType <clusterType> HDInsight cluster type.
Hadoop | HBase | Spark | Storm
--defaultStorageAccountName <storageAccountName> Storage account url to use for default HDInsight storage
--defaultStorageAccountKey <storageAccountKey> Key to the storage account to use for default HDInsight storage
--defaultStorageContainer <storageContainer> Container in the storage account to use for HDInsight default storage
--headNodeSize <headNodeSize> (Optional) Head node size for the cluster
--workerNodeCount <workerNodeCount> Number of worker nodes to use for the cluster
--workerNodeSize <workerNodeSize> (Optional) Worker node size for the cluster)
--zookeeperNodeSize <zookeeperNodeSize> (Optional) Zookeeper node size for the cluster
--userName <userName> Cluster username
--password <password> Cluster password
--sshUserName <sshUserName> SSH username (only for Linux clusters)
--sshPassword <sshPassword> SSH password (only for Linux clusters)
--sshPublicKey <sshPublicKey> SSH public key (only for Linux clusters)
--rdpUserName <rdpUserName> RDP username (only for Windows clusters)
--rdpPassword <rdpPassword> RDP password (only for Windows clusters)
--rdpAccessExpiry <rdpAccessExpiry> RDP access expiry.
For example 12/12/2015 (only for Windows clusters)
--virtualNetworkId <virtualNetworkId> (Optional) Virtual network ID for the cluster.
Value is a GUID for Windows cluster and ARM resource ID for Linux cluster)
--subnetName <subnetName> (Optional) Subnet for the cluster
--additionalStorageAccounts <additionalStorageAccounts> (Optional) Additional storage accounts.
Can be multiple.
In the format of 'accountName#accountKey'.
For example, --additionalStorageAccounts "acc1#key1;acc2#key2"
--hiveMetastoreServerName <hiveMetastoreServerName> (Optional) SQL Server name for the external metastore for Hive
--hiveMetastoreDatabaseName <hiveMetastoreDatabaseName> (Optional) Database name for the external metastore for Hive
--hiveMetastoreUserName <hiveMetastoreUserName> (Optional) Database username for the external metastore for Hive
--hiveMetastorePassword <hiveMetastorePassword> (Optional) Database password for the external metastore for Hive
--oozieMetastoreServerName <oozieMetastoreServerName> (Optional) SQL Server name for the external metastore for Oozie
--oozieMetastoreDatabaseName <oozieMetastoreDatabaseName> (Optional) Database name for the external metastore for Oozie
--oozieMetastoreUserName <oozieMetastoreUserName> (Optional) Database username for the external metastore for Oozie
--oozieMetastorePassword <oozieMetastorePassword> (Optional) Database password for the external metastore for Oozie
--configurationPath <configurationPath> (Optional) HDInsight cluster configuration file path
-s, --subscription <id> The subscription id
--tags <tags> Tags to set to the cluster.
Can be multiple.
In the format of 'name=value'.
Name is required and value is optional.
For example, --tags tag1=value1;tag2
Perintah untuk menghapus kluster
hdinsight cluster delete [options] <clusterName>
Perintah untuk menampilkan detail kluster
hdinsight cluster show [options] <clusterName>
Perintah untuk mencantumkan semua kluster (dalam grup sumber daya tertentu, jika disediakan)
hdinsight cluster list [options]
Perintah untuk mengubah ukuran kluster
hdinsight cluster resize [options] <clusterName> <targetInstanceCount>
Perintah untuk mengaktifkan akses HTTP untuk kluster
hdinsight cluster enable-http-access [options] <clusterName> <userName> <password>
Perintah untuk menonaktifkan akses HTTP untuk kluster
hdinsight cluster disable-http-access [options] <clusterName>
Perintah untuk mengaktifkan akses RDP untuk kluster
hdinsight cluster enable-rdp-access [options] <clusterName> <rdpUserName> <rdpPassword> <rdpExpiryDate>
Perintah untuk menonaktifkan akses HTTP untuk kluster
hdinsight cluster disable-rdp-access [options] <clusterName>
Insights (peristiwa, aturan peringatan, pengaturan skala otomatis, metrik)
Mengambil log operasi untuk langganan, correlationId, grup sumber daya, sumber daya, atau penyedia sumber daya
insights logs list [options]
Lokasi
Mencantumkan lokasi yang tersedia
location list [options]
Sumber daya jaringan
Perintah untuk mengelola jaringan virtual
network vnet create [options] <resource-group> <name> <location>
Membuat jaringan virtual. Dalam contoh berikut kita membuat jaringan virtual bernama newvnet untuk grup sumber daya myresourcegroup di wilayah AS Barat.
azure network vnet create myresourcegroup newvnet "west us"
info: Executing command network vnet create
+ Looking up virtual network "newvnet"
+ Creating virtual network "newvnet"
Loading virtual network state
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data: Name: newvnet
data: Type: Microsoft.Network/virtualNetworks
data: Location: westus
data: Tags:
data: Provisioning state: Succeeded
data: Address prefixes:
data: 10.0.0.0/8
data: DNS servers:
data: Subnets:
data:
info: network vnet create command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the virtual network
-l, --location <location> the location
-a, --address-prefixes <address-prefixes> the comma separated list of address prefixes for this virtual network
For example -a 10.0.0.0/24,10.0.1.0/24.
Default value is 10.0.0.0/8
-d, --dns-servers <dns-servers> the comma separated list of DNS servers IP addresses
-t, --tags <tags> the tags set on this virtual network.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
network vnet set [options] <resource-group> <name>
Memperbarui konfigurasi jaringan virtual dalam grup sumber daya.
azure network vnet set myresourcegroup newvnet
info: Executing command network vnet set
+ Looking up virtual network "newvnet"
+ Updating virtual network "newvnet"
+ Loading virtual network state
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data: Name: newvnet
data: Type: Microsoft.Network/virtualNetworks
data: Location: westus
data: Tags:
data: Provisioning state: Succeeded
data: Address prefixes:
data: 10.0.0.0/8
data: DNS servers:
data: Subnets:
data:
info: network vnet set command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the virtual network
-a, --address-prefixes <address-prefixes> the comma separated list of address prefixes for this virtual network.
For example -a 10.0.0.0/24,10.0.1.0/24.
This list will be appended to the current list of address prefixes.
The address prefixes in this list should not overlap between them.
The address prefixes in this list should not overlap with existing address prefixes in the vnet.
-d, --dns-servers [dns-servers] the comma separated list of DNS servers IP addresses.
This list will be appended to the current list of DNS server IP addresses.
-t, --tags <tags> the tags set on this virtual network.
Can be multiple. In the format of "name=value".
Name is required and value is optional. For example, -t tag1=value1;tag2.
This list will be appended to the current list of tags
--no-tags remove all existing tags
-s, --subscription <subscription> the subscription identifier
network vnet list [options] <resource-group>
Perintah mencantumkan semua jaringan virtual dalam grup sumber daya.
C:\>azure network vnet list myresourcegroup
info: Executing command network vnet list
+ Listing virtual networks
data: ID
Name Location Address prefixes DNS servers
data: -------------------------------------------------------------------
------ -------- -------- ---------------- -----------
data: /subscriptions/###############################/resourceGroups/
wvnet newvnet westus 10.0.0.0/8
info: network vnet list command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-s, --subscription <subscription> the subscription identifier
network vnet show [options] <resource-group> <name>
Perintah menunjukkan properti jaringan virtual dalam grup sumber daya.
azure network vnet show -g myresourcegroup -n newvnet
info: Executing command network vnet show
+ Looking up virtual network "newvnet"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet
data: Name: newvnet
data: Type: Microsoft.Network/virtualNetworks
data: Location: westus
data: Tags:
data: Provisioning state: Succeeded
data: Address prefixes:
data: 10.0.0.0/8
data: DNS servers:
data: Subnets:
data:
info: network vnet show command OK
network vnet delete [options] <resource-group> <name>
Perintah menghapus jaringan virtual.
azure network vnet delete myresourcegroup newvnetX
info: Executing command network vnet delete
+ Looking up virtual network "newvnetX"
Delete virtual network newvnetX? [y/n] y
+ Deleting virtual network "newvnetX"
info: network vnet delete command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the virtual network
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
Perintah untuk mengelola subnet jaringan virtual
network vnet subnet create [options] <resource-group> <vnet-name> <name>
Menambahkan subnet lain ke jaringan virtual yang ada.
azure network vnet subnet create -g myresourcegroup --vnet-name newvnet -n subnet --address-prefix 10.0.1.0/24
info: Executing command network vnet subnet create
+ Looking up the subnet "subnet"
+ Creating subnet "subnet"
+ Looking up the subnet "subnet"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet
data: Name: subnet
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet create command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-e, --vnet-name <vnet-name> the name of the virtual network
-n, --name <name> the name of the subnet
-a, --address-prefix <address-prefix> the address prefix
-w, --network-security-group-id <network-security-group-id> the network security group identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/networkSecurityGroups/<nsg-name>
-o, --network-security-group-name <network-security-group-name> the network security group name
-s, --subscription <subscription> the subscription identifier
network vnet subnet set [options] <resource-group> <vnet-name> <name>
Menetapkan subnet jaringan virtual tertentu dalam grup sumber daya.
C:\>azure network vnet subnet set -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet set
+ Looking up the subnet "subnet1"
+ Setting subnet "subnet1"
+ Looking up the subnet "subnet1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet1
data: Name: subnet1
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet set command OK
network vnet subnet list [options] <resource-group> <vnet-name>
Mencantumkan semua subnet jaringan virtual untuk jaringan virtual tertentu dalam grup sumber daya.
azure network vnet subnet set -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet set
+ Looking up the subnet "subnet1"
+ Setting subnet "subnet1"
+ Looking up the subnet "subnet1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet1
data: Name: subnet1
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet set command OK
network vnet subnet show [options] <resource-group> <vnet-name> <name>
Menampilkan properti subnet jaringan virtual
azure network vnet subnet show -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet show
+ Looking up the subnet "subnet1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft
.Network/virtualNetworks/newvnet/subnets/subnet1
data: Name: subnet1
data: Type: Microsoft.Network/virtualNetworks/subnets
data: Provisioning state: Succeeded
data: Address prefix: 10.0.1.0/24
info: network vnet subnet show command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-e, --vnet-name <vnet-name> the name of the virtual network
-n, --name <name> the name of the subnet
-s, --subscription <subscription> the subscription identifier
network vnet subnet delete [options] <resource-group> <vnet-name> <subnet-name>
Menghapus subnet dari jaringan virtual yang ada.
azure network vnet subnet delete -g myresourcegroup --vnet-name newvnet -n subnet1
info: Executing command network vnet subnet delete
+ Looking up the subnet "subnet1"
Delete subnet "subnet1"? [y/n] y
+ Deleting subnet "subnet1"
info: network vnet subnet delete command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-e, --vnet-name <vnet-name> the name of the virtual network
-n, --name <name> the subnet name
-s, --subscription <subscription> the subscription identifier
-q, --quiet quiet mode, do not ask for delete confirmation
Perintah untuk mengelola penyeimbang beban
network lb create [options] <resource-group> <name> <location>
Membuat set penyeimbang beban.
azure network lb create -g myresourcegroup -n mylb -l westus
info: Executing command network lb create
+ Looking up the load balancer "mylb"
+ Creating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
data: Name: mylb
data: Type: Microsoft.Network/loadBalancers
data: Location: westus
data: Provisioning state: Succeeded
info: network lb create command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the load balancer
-l, --location <location> the location
-t, --tags <tags> the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional. For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
network lb list [options] <resource-group>
Daftar Memuat sumber daya penyeimbang dalam grup sumber daya.
azure network lb list myresourcegroup
info: Executing command network lb list
+ Getting the load balancers
data: Name Location
data: ---- --------
data: mylb westus
info: network lb list command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-s, --subscription <subscription> the subscription identifier
network lb show [options] <resource-group> <name>
Menampilkan informasi penyeimbang beban dari penyeimbang beban tertentu dalam grup sumber daya
azure network lb show myresourcegroup mylb -v
info: Executing command network lb show
verbose: Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
data: Name: mylb
data: Type: Microsoft.Network/loadBalancers
data: Location: westus
data: Provisioning state: Succeeded
info: network lb show command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb delete [options] <resource-group> <name>
Hapus sumber daya penyeimbang beban.
azure network lb delete myresourcegroup mylb
info: Executing command network lb delete
+ Looking up the load balancer "mylb"
Delete load balancer "mylb"? [y/n] y
+ Deleting load balancer "mylb"
info: network lb delete command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the load balancer
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
Perintah untuk mengelola probe penyeimbang beban
network lb probe create [options] <resource-group> <lb-name> <name>
Buat konfigurasi probe untuk status kesehatan di penyeimbang beban. Perlu diingat untuk menjalankan perintah ini, penyeimbang beban Anda memerlukan sumber daya frontend-ip (Lihat perintah "azure network frontend-ip" untuk menetapkan alamat ip ke load balancer).
azure network lb probe create -g myresourcegroup --lb-name mylb -n mylbprobe --protocol tcp --port 80 -i 300
info: Executing command network lb probe create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
info: network lb probe create command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the probe
-p, --protocol <protocol> the probe protocol
-o, --port <port> the probe port
-f, --path <path> the probe path
-i, --interval <interval> the probe interval in seconds
-c, --count <count> the number of probes
-s, --subscription <subscription> the subscription identifier
network lb probe set [options] <resource-group> <lb-name> <name>
Memperbarui probe penyeimbang beban yang ada dengan nilai baru untuk itu.
azure network lb probe set -g myresourcegroup -l mylb -n mylbprobe -p mylbprobe1 -p TCP -o 443 -i 300
info: Executing command network lb probe set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
info: network lb probe set command OK
Opsi parameter waktu
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the probe
-e, --new-probe-name <new-probe-name> the new name of the probe
-p, --protocol <protocol> the new value for probe protocol
-o, --port <port> the new value for probe port
-f, --path <path> the new value for probe path
-i, --interval <interval> the new value for probe interval in seconds
-c, --count <count> the new value for number of probes
-s, --subscription <subscription> the subscription identifier
network lb probe list [options] <resource-group> <lb-name>
Cantumkan properti probe untuk set penyeimbang beban.
C:\>azure network lb probe list -g myresourcegroup -l mylb
info: Executing command network lb probe list
+ Looking up the load balancer "mylb"
data: Name Protocol Port Path Interval Count
data: --------- -------- ---- ---- -------- -----
data: mylbprobe Tcp 443 300 2
info: network lb probe list command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb probe delete [options] <resource-group> <lb-name> <name>
Menghapus probe yang dibuat untuk penyeimbang beban.
azure network lb probe delete -g myresourcegroup -l mylb -n mylbprobe
info: Executing command network lb probe delete
+ Looking up the load balancer "mylb"
Delete a probe "mylbprobe?" [y/n] y
+ Updating load balancer "mylb"
info: network lb probe delete command OK
Perintah untuk mengelola konfigurasi ip frontend dari penyeimbang beban
network lb frontend-ip create [options] <resource-group> <lb-name> <name>
Membuat konfigurasi IP frontend ke set penyeimbang beban yang ada.
azure network lb frontend-ip create -g myresourcegroup --lb-name mylb -n myfrontendip -o Dynamic -e subnet -m newvnet
info: Executing command network lb frontend-ip create
+ Looking up the load balancer "mylb"
+ Looking up the subnet "subnet"
+ Creating frontend IP configuration "myfrontendip"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/Myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb
/frontendIPConfigurations/myfrontendip
data: Name: myfrontendip
data: Type: Microsoft.Network/loadBalancers/frontendIPConfigurations
data: Provisioning state: Succeeded
data: Private IP allocation method: Dynamic
data: Private IP address: 10.0.1.4
data: Subnet: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/virtualNetworks/newvnet/subnets/subnet
data: Public IP address:
data: Inbound NAT rules
data: Outbound NAT rules
data: Load balancing rules
data:
info: network lb frontend-ip create command OK
network lb frontend-ip set [options] <resource-group> <lb-name> <name>
Memperbarui konfigurasi IP frontend yang ada. Perintah di bawah ini menambahkan IP publik yang disebut mypubip5 ke IP frontend penyeimbang beban yang ada bernama myfrontendip.
azure network lb frontend-ip set -g myresourcegroup --lb-name mylb -n myfrontendip -i mypubip5
info: Executing command network lb frontend-ip set
+ Looking up the load balancer "mylb"
+ Looking up the public ip "mypubip5"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Name: myfrontendip
data: Type: Microsoft.Network/loadBalancers/frontendIPConfigurations
data: Provisioning state: Succeeded
data: Private IP allocation method: Dynamic
data: Private IP address:
data: Subnet:
data: Public IP address: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mypubip5
data: Inbound NAT rules
data: Outbound NAT rules
data: Load balancing rules
data:
info: network lb frontend-ip set command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the frontend ip configuration
-a, --private-ip-address <private-ip-address> the private ip address
-o, --private-ip-allocation-method <private-ip-allocation-method> the private ip allocation method [Static, Dynamic]
-u, --public-ip-id <public-ip-id> the public ip identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/publicIPAddresses/<public-ip-name>
-i, --public-ip-name <public-ip-name> the public ip name.
This public ip must exist in the same resource group as the lb.
Please use public-ip-id if that is not the case.
-b, --subnet-id <subnet-id> the subnet id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/VirtualNetworks/<vnet-name>/subnets/<subnet-name>
-e, --subnet-name <subnet-name> the subnet name
-m, --vnet-name <vnet-name> the virtual network name.
This virtual network must exist in the same resource group as the lb.
Please use subnet-id if that is not the case.
-s, --subscription <subscription> the subscription identifier
network lb frontend-ip list [options] <resource-group> <lb-name>
Mencantumkan semua sumber daya IP frontend yang dikonfigurasi untuk penyeimbang beban.
azure network lb frontend-ip list -g myresourcegroup -l mylb
info: Executing command network lb frontend-ip list
+ Looking up the load balancer "mylb"
data: Name Provisioning state Private IP allocation method Subnet
data: ----------- ------------------ ---------------------------- ------
data: myprivateip Succeeded Dynamic
info: network lb frontend-ip list command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb frontend-ip delete [options] <resource-group> <lb-name> <name>
Menghapus objek IP frontend yang terkait dengan penyeimbang beban
network lb frontend-ip delete -g myresourcegroup -l mylb -n myfrontendip
info: Executing command network lb frontend-ip delete
+ Looking up the load balancer "mylb"
Delete frontend ip configuration "myfrontendip"? [y/n] y
+ Updating load balancer "mylb"
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the frontend ip configuration
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
Perintah untuk mengelola kumpulan alamat backend dari penyeimbang beban
network lb address-pool create [options] <resource-group> <lb-name> <name>
Buat kumpulan alamat backend untuk penyeimbang beban.
azure network lb address-pool create -g myresourcegroup --lb-name mylb -n myaddresspool
info: Executing command network lb address-pool create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourgroup/providers/Microso.Network/loadBalancers/mylb/backendAddressPools/myaddresspool
data: Name: myaddresspool
data: Type: Microsoft.Network/loadBalancers/backendAddressPools
data: Provisioning state: Succeeded
data: Backend IP configurations:
data: Load balancing rules:
data:
info: network lb address-pool create command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the backend address pool
-s, --subscription <subscription> the subscription identifier
network lb address-pool list [options] <resource-group> <lb-name>
Mencantumkan rentang kumpulan alamat IP backend untuk grup sumber daya tertentu
azure network lb address-pool list -g myresourcegroup -l mylb
info: Executing command network lb address-pool list
+ Looking up the load balancer "mylb"
data: Name Provisioning state
data: ------------- ------------------
data: mybackendpool Succeeded
info: network lb address-pool list command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb address-pool delete [options] <resource-group> <lb-name> <name>
Menghapus sumber daya rentang kumpulan IP backend dari penyeimbang beban.
azure network lb address-pool delete -g myresourcegroup -l mylb -n mybackendpool
info: Executing command network lb address-pool delete
+ Looking up the load balancer "mylb"
Delete backend address pool "mybackendpool"? [y/n] y
+ Updating load balancer "mylb"
info: network lb address-pool delete command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the backend address pool
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
Perintah untuk mengelola aturan penyeimbang beban
network lb rule create [options] <resource-group> <lb-name> <name>
Buat aturan penyeimbang beban.
Anda dapat membuat aturan penyeimbang beban yang mengonfigurasi titik akhir frontend untuk penyeimbang beban dan rentang kumpulan alamat backend untuk menerima lalu lintas jaringan yang masuk. Pengaturan juga menyertakan port untuk titik akhir IP frontend dan port untuk rentang kumpulan alamat backend.
Contoh berikut menunjukkan cara membuat aturan penyeimbang beban, titik akhir frontend mendengarkan port 80 TCP dan lalu lintas jaringan penyeimbangan beban yang dikirim ke port 8080 untuk rentang kumpulan alamat backend.
azure network lb rule create -g myresourcegroup -l mylb -n mylbrule -p tcp -f 80 -b 8080 -i 10
info: Executing command network lb rule create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Loading rule state
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/loadBalancingRules/mylbrule
data: Name: mylbrule
data: Type: Microsoft.Network/loadBalancers/loadBalancingRules
data: Provisioning state: Succeeded
data: Frontend IP configuration: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend address pool: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
data: Protocol: Tcp
data: Frontend port: 80
data: Backend port: 8080
data: Enable floating IP: false
data: Idle timeout in minutes: 10
data: Probes
data:
info: network lb rule create command OK
network lb rule set [options] <resource-group> <lb-name> <name>
Memperbarui aturan penyeimbang beban yang ada yang ditetapkan dalam grup sumber daya tertentu. Dalam contoh berikut, kami mengubah nama aturan dari mylbrule menjadi mynewlbrule.
azure network lb rule set -g myresourcegroup -l mylb -n mylbrule -r mynewlbrule -p tcp -f 80 -b 8080 -i 10 -t myfrontendip -o mybackendpool
info: Executing command network lb rule set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Loading rule state
data: Id: /subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/loadBalancingRules/mynewlbrule
data: Name: mynewlbrule
data: Type: Microsoft.Network/loadBalancers/loadBalancingRules
data: Provisioning state: Succeeded
data: Frontend IP configuration: /subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend address pool: id=/subscriptions/###############################/resourceGroups/yresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
data: Protocol: Tcp
data: Frontend port: 80
data: Backend port: 8080
data: Enable floating IP: false
data: Idle timeout in minutes: 10
data: Probes
data:
info: network lb rule set command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the rule
-r, --new-rule-name <new-rule-name> new rule name
-p, --protocol <protocol> the rule protocol
-f, --frontend-port <frontend-port> the frontend port
-b, --backend-port <backend-port> the backend port
-e, --enable-floating-ip <enable-floating-ip> enable floating point ip
-i, --idle-timeout <idle-timeout> the idle timeout in minutes
-a, --probe-name [probe-name] the name of the probe defined in the same load balancer
-t, --frontend-ip-name <frontend-ip-name> the name of the frontend ip configuration in the same load balancer
-o, --backend-address-pool <backend-address-pool> name of the backend address pool defined in the same load balancer
-s, --subscription <subscription> the subscription identifier
network lb rule list [options] <resource-group> <lb-name>
Mencantumkan semua aturan penyeimbang beban yang dikonfigurasi untuk penyeimbang beban dalam grup sumber daya tertentu.
azure network lb rule list -g myresourcegroup -l mylb
info: Executing command network lb rule list
+ Looking up the load balancer "mylb"
data: Name Provisioning state Protocol Frontend port Backend port Enable floating IP Idle timeout in minutes Backend address pool Probe data
data: mynewlbrule Succeeded Tcp 80 8080 false 10 /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/backendAddressPools/mybackendpool
info: network lb rule list command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb rule delete [options] <resource-group> <lb-name> <name>
Menghapus aturan penyeimbang beban.
azure network lb rule delete -g myresourcegroup -l mylb -n mynewlbrule
info: Executing command network lb rule delete
+ Looking up the load balancer "mylb"
Delete load balancing rule mynewlbrule? [y/n] y
+ Updating load balancer "mylb"
info: network lb rule delete command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the rule
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
Perintah untuk mengelola aturan NAT masuk penyeimbang beban
network lb inbound-nat-rule create [options] <resource-group> <lb-name> <name>
Membuat aturan NAT masuk untuk penyeimbang beban.
Dalam contoh berikut kami membuat aturan NAT dari IP frontend (yang sebelumnya didefinisikan menggunakan perintah "azure network frontend-ip") dengan port mendengarkan masuk dan port keluar yang digunakan penyeimbang beban untuk mengirim lalu lintas jaringan.
azure network lb inbound-nat-rule create -g myresourcegroup -l mylb -n myinboundnat -p tcp -f 80 -b 8080 -i myfrontendip
info: Executing command network lb inbound-nat-rule create
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/inboundNatRules/myinboundnat
data: Name: myinboundnat
data: Type: Microsoft.Network/loadBalancers/inboundNatRules
data: Provisioning state: Succeeded
data: Frontend IP Configuration: id=/subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend IP configuration
data: Protocol Tcp
data: Frontend port 80
data: Backend port 8080
data: Enable floating IP false
info: network lb inbound-nat-rule create command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the inbound NAT rule
-p, --protocol <protocol> the rule protocol [tcp,udp]
-f, --frontend-port <frontend-port> the frontend port [0-65535]
-b, --backend-port <backend-port> the backend port [0-65535]
-e, --enable-floating-ip <enable-floating-ip> enable floating point ip [true,false]
-i, --frontend-ip <frontend-ip> the name of the frontend ip configuration
-m, --vm-id <vm-id> the VM id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Compute/virtualMachines/<vm-name>
-a, --vm-name <vm-name> the VM name.This VM must exist in the same resource group as the lb.
Please use vm-id if that is not the case.
this parameter will be ignored if --vm-id is specified
-s, --subscription <subscription> the subscription identifier
network lb inbound-nat-rule set [options] <resource-group> <lb-name> <name>
Memperbarui aturan nat masuk yang ada. Dalam contoh berikut, kami mengubah port mendengarkan masuk dari 80 menjadi 81.
azure network lb inbound-nat-rule set -g group-1 -l mylb -n myinboundnat -p tcp -f 81 -b 8080 -i myfrontendip
info: Executing command network lb inbound-nat-rule set
+ Looking up the load balancer "mylb"
+ Updating load balancer "mylb"
+ Looking up the load balancer "mylb"
data: Id: /subscriptions/###############################/resourceGroups/group-1/providers/Microsoft.Network/loadBalancers/mylb/inboundNatRules/myinboundnat
data: Name: myinboundnat
data: Type: Microsoft.Network/loadBalancers/inboundNatRules
data: Provisioning state: Succeeded
data: Frontend IP Configuration: id=/subscriptions/###############################/resourceGroups/group-1/providers/Microsoft.Network/loadBalancers/mylb/frontendIPConfigurations/myfrontendip
data: Backend IP configuration
data: Protocol Tcp
data: Frontend port 81
data: Backend port 8080
data: Enable floating IP false
info: network lb inbound-nat-rule set command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the inbound NAT rule
-p, --protocol <protocol> the rule protocol [tcp,udp]
-f, --frontend-port <frontend-port> the frontend port [0-65535]
-b, --backend-port <backend-port> the backend port [0-65535]
-e, --enable-floating-ip <enable-floating-ip> enable floating point ip [true,false]
-i, --frontend-ip <frontend-ip> the name of the frontend ip configuration
-m, --vm-id [vm-id] the VM id.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Compute/virtualMachines/<vm-name>
-a, --vm-name <vm-name> the VM name.
This virtual machine must exist in the same resource group as the lb.
Please use vm-id if that is not the case
-s, --subscription <subscription> the subscription identifier
network lb inbound-nat-rule list [options] <resource-group> <lb-name>
Mencantumkan semua aturan nat masuk untuk penyeimbang beban.
azure network lb inbound-nat-rule list -g myresourcegroup -l mylb
info: Executing command network lb inbound-nat-rule list
+ Looking up the load balancer "mylb"
data: Name Provisioning state Protocol Frontend port Backend port Enable floating IP Idle timeout in minutes Backend IP configuration
data: ------------ ------------------ -------- ------------- ------------ ------------------ ----------------------- ---
---------------------
data: myinboundnat Succeeded Tcp 81 8080 false 4
info: network lb inbound-nat-rule list command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-s, --subscription <subscription> the subscription identifier
network lb inbound-nat-rule delete [options] <resource-group> <lb-name> <name>
Menghapus aturan NAT untuk penyeimbang beban dalam grup sumber daya tertentu.
azure network lb inbound-nat-rule delete -g myresourcegroup -l mylb -n myinboundnat
info: Executing command network lb inbound-nat-rule delete
+ Looking up the load balancer "mylb"
Delete inbound NAT rule "myinboundnat?" [y/n] y
+ Updating load balancer "mylb"
info: network lb inbound-nat-rule delete command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-l, --lb-name <lb-name> the name of the load balancer
-n, --name <name> the name of the inbound NAT rule
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
Perintah untuk mengelola alamat IP publik
network public-ip create [options] <resource-group> <name> <location>
Membuat sumber daya ip publik. Anda akan membuat sumber daya ip publik dan mengaitkan dengan nama domain.
azure network public-ip create -g myresourcegroup -n mytestpublicip1 -l eastus -d azureclitest -a "Dynamic"
info: Executing command network public-ip create
+ Looking up the public ip "mytestpublicip1"
+ Creating public ip address "mytestpublicip1"
+ Looking up the public ip "mytestpublicip1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip1
data: Name: mytestpublicip1
data: Type: Microsoft.Network/publicIPAddresses
data: Location: eastus
data: Provisioning state: Succeeded
data: Allocation method: Dynamic
data: Idle timeout: 4
data: Domain name label: azureclitest
data: FQDN: azureclitest.eastus.cloudapp.azure.com
info: network public-ip create command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public ip
-l, --location <location> the location
-d, --domain-name-label <domain-name-label> the domain name label.
This set DNS to <domain-name-label>.<location>.cloudapp.azure.com
-a, --allocation-method <allocation-method> the allocation method [Static][Dynamic]
-i, --idletimeout <idletimeout> the idle timeout in minutes
-f, --reverse-fqdn <reverse-fqdn> the reverse fqdn
-t, --tags <tags> the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
network public-ip set [options] <resource-group> <name>
Memperbarui properti sumber daya ip publik yang ada. Dalam contoh berikut kami mengubah alamat IP publik dari Dinamis ke Statis.
azure network public-ip set -g group-1 -n mytestpublicip1 -d azureclitest -a "Static"
info: Executing command network public-ip set
+ Looking up the public ip "mytestpublicip1"
+ Updating public ip address "mytestpublicip1"
+ Looking up the public ip "mytestpublicip1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip1
data: Name: mytestpublicip1
data: Type: Microsoft.Network/publicIPAddresses
data: Location: eastus
data: Provisioning state: Succeeded
data: Allocation method: Static
data: Idle timeout: 4
data: IP Address: (static IP address)
data: Domain name label: azureclitest
data: FQDN: azureclitest.eastus.cloudapp.azure.com
info: network public-ip set command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public ip
-d, --domain-name-label [domain-name-label] the domain name label.
This set DNS to <domain-name-label>.<location>.cloudapp.azure.com
-a, --allocation-method <allocation-method> the allocation method [Static][Dynamic]
-i, --idletimeout <idletimeout> the idle timeout in minutes
-f, --reverse-fqdn [reverse-fqdn] the reverse fqdn
-t, --tags <tags> the list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
--no-tags remove all existing tags
-s, --subscription <subscription> the subscription identifier
network public-ip list [options] <resource-group>
Mencantumkan semua sumber daya IP publik dalam grup sumber daya.
azure network public-ip list -g myresourcegroup
info: Executing command network public-ip list
+ Getting the public ip addresses
data: Name Location Allocation IP Address Idle timeout DNS Name
data: --------------- -------- ---------- ------------ ------------ -------------------------------------------
data: mypubip5 westus Dynamic 4 "domain name".westus.cloudapp.azure.com
data: myPublicIP eastus Dynamic 4 "domain name".eastus.cloudapp.azure.com
data: mytestpublicip eastus Dynamic 4 "domain name".eastus.cloudapp.azure.com
data: mytestpublicip1 eastus Static (Static IP address) 4 azureclitest.eastus.cloudapp.azure.com
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-s, --subscription <subscription> the subscription identifier
network public-ip show [options] <resource-group> <name>
Menampilkan properti ip publik untuk sumber daya ip publik dalam grup sumber daya.
azure network public-ip show -g myresourcegroup -n mytestpublicip
info: Executing command network public-ip show
+ Looking up the public ip "mytestpublicip1"
data: Id: /subscriptions/###############################/resourceGroups/myresourcegroup/providers/Microsoft.Network/publicIPAddresses/mytestpublicip
data: Name: mytestpublicip
data: Type: Microsoft.Network/publicIPAddresses
data: Location: eastus
data: Provisioning state: Succeeded
data: Allocation method: Static
data: Idle timeout: 4
data: IP Address: (static IP address)
data: Domain name label: azureclitest
data: FQDN: azureclitest.eastus.cloudapp.azure.com
info: network public-ip show command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public IP
-s, --subscription <subscription> the subscription identifier
network public-ip delete [options] <resource-group> <name>
Menghapus sumber daya ip publik.
azure network public-ip delete -g group-1 -n mypublicipname
info: Executing command network public-ip delete
+ Looking up the public ip "mypublicipname"
Delete public ip address "mypublicipname"? [y/n] y
+ Deleting public ip address "mypublicipname"
info: network public-ip delete command OK
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the public IP
-q, --quiet quiet mode, do not ask for delete confirmation
-s, --subscription <subscription> the subscription identifier
Perintah untuk mengelola antarmuka jaringan
network nic create [options] <resource-group> <name> <location>
Membuat sumber daya yang disebut antarmuka jaringan (NIC) yang dapat digunakan untuk penyeimbang beban atau asosiasi ke Mesin Virtual.
azure network nic create -g myresourcegroup -l eastus -n testnic1 --subnet-name subnet-1 --subnet-vnet-name myvnet
info: Executing command network nic create
+ Looking up the network interface "testnic1"
+ Looking up the subnet "subnet-1"
+ Creating network interface "testnic1"
+ Looking up the network interface "testnic1"
data: Id: /subscriptions/c4a17ddf-aa84-491c-b6f9-b90d882299f7/resourceGroups/group-1/providers/Microsoft.Network/networkInterfaces/testnic1
data: Name: testnic1
data: Type: Microsoft.Network/networkInterfaces
data: Location: eastus
data: Provisioning state: Succeeded
data: IP configurations:
data: Name: NIC-config
data: Provisioning state: Succeeded
data: Private IP address: 10.0.0.5
data: Private IP Allocation Method: Dynamic
data: Subnet: /subscriptions/c4a17ddf-aa84-491c-b6f9-b90d882299f7/resourceGroups/group-1/providers/Microsoft.Network/virtualNetworks/myVNET/subnets/Subnet-1
Opsi parameter:
-h, --help output usage information
-v, --verbose use verbose output
--json use json output
-g, --resource-group <resource-group> the name of the resource group
-n, --name <name> the name of the network interface
-l, --location <location> the location
-w, --network-security-group-id <network-security-group-id> the network security group identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/networkSecurityGroups/<nsg-name>
-o, --network-security-group-name <network-security-group-name> the network security group name.
This network security group must exist in the same resource group as the nic.
Please use network-security-group-id if that is not the case.
-i, --public-ip-id <public-ip-id> the public IP identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/publicIPAddresses/<public-ip-name>
-p, --public-ip-name <public-ip-name> the public IP name.
This public ip must exist in the same resource group as the nic.
Please use public-ip-id if that is not the case.
-a, --private-ip-address <private-ip-address> the private IP address
-u, --subnet-id <subnet-id> the subnet identifier.
e.g. /subscriptions/<subscription-id>/resourceGroups/<resource-group-name>/providers/Microsoft.Network/virtualNetworks/<vnet-name>/subnets/<subnet-name>
--subnet-name <subnet-name> the subnet name
-m, --subnet-vnet-name <subnet-vnet-name> the vnet name under which subnet-name exists
-t, --tags <tags> the comma separated list of tags.
Can be multiple. In the format of "name=value".
Name is required and value is optional.
For example, -t tag1=value1;tag2
-s, --subscription <subscription> the subscription identifier
data:
info: network nic create command OK
network nic set [options] <resource-group> <name>
network nic list [options] <resource-group>
network nic show [options] <resource-group> <name>
network nic delete [options] <resource-group> <name>
Perintah untuk mengelola grup keamanan jaringan
network nsg create [options] <resource-group> <name> <location>
network nsg set [options] <resource-group> <name>
network nsg list [options] <resource-group>
network nsg show [options] <resource-group> <name>
network nsg delete [options] <resource-group> <name>
Perintah untuk mengelola aturan grup keamanan jaringan
network nsg rule create [options] <resource-group> <nsg-name> <name>
network nsg rule set [options] <resource-group> <nsg-name> <name>
network nsg rule list [options] <resource-group> <nsg-name>
network nsg rule show [options] <resource-group> <nsg-name> <name>
network nsg rule delete [options] <resource-group> <nsg-name> <name>
Perintah untuk mengelola profil pengelola lalu lintas
network traffic-manager profile create [options] <resource-group> <name>
network traffic-manager profile set [options] <resource-group> <name>
network traffic-manager profile list [options] <resource-group>
network traffic-manager profile show [options] <resource-group> <name>
network traffic-manager profile delete [options] <resource-group> <name>
network traffic-manager profile is-dns-available [options] <resource-group> <relative-dns-name>
Perintah untuk mengelola titik akhir pengelola lalu lintas
network traffic-manager profile endpoint create [options] <resource-group> <profile-name> <name> <endpoint-location>
network traffic-manager profile endpoint set [options] <resource-group> <profile-name> <name>
network traffic-manager profile endpoint delete [options] <resource-group> <profile-name> <name>
Perintah untuk mengelola gateway jaringan virtual
network gateway list [options] <resource-group>
Pendaftaran penyedia sumber daya
Daftar penyedia yang terdaftar saat ini di Resource Manager
provider list [options]
Tampilkan detail tentang namespace penyedia yang diminta
provider show [options] <namespace>
Daftarkan penyedia dengan langganan
provider register [options] <namespace>
Penyedia yang tidak terdaftar dengan langganan
provider unregister [options] <namespace>
Sumber
Membuat sumber daya dalam grup sumber daya
resource create [options] <resource-group> <name> <resource-type> <location> <api-version>
Memperbarui sumber daya dalam grup sumber daya tanpa templat atau parameter apa pun
resource set [options] <resource-group> <name> <resource-type> <properties> <api-version>
Mencantumkan sumber daya
resource list [options] [resource-group]
Mendapatkan satu sumber daya dalam grup sumber daya atau langganan
resource show [options] <resource-group> <name> <resource-type> <api-version>
Menghapus sumber daya dalam grup sumber daya
resource delete [options] <resource-group> <name> <resource-type> <api-version>
Peran Azure
Dapatkan semua definisi peran yang tersedia
role list [options]
Dapatkan definisi peran yang tersedia
role show [options] [name]
Perintah untuk mengelola penetapan peran Anda
role assignment create [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
role assignment list [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
role assignment delete [options] [objectId] [upn] [mail] [spn] [role] [scope] [resource-group] [resource-type] [resource-name]
objek Storage
Perintah untuk mengelola akun Storage Anda
storage account list [options]
storage account show [options] <name>
storage account create [options] <name>
storage account set [options] <name>
storage account delete [options] <name>
Perintah untuk mengelola kunci akun Storage Anda
storage account keys list [options] <name>
storage account keys renew [options] <name>
Perintah untuk menampilkan string koneksi Storage Anda
storage account connectionstring show [options] <name>
Perintah untuk mengelola kontainer Storage Anda
storage container list [options] [prefix]
storage container show [options] [container]
storage container create [options] [container]
storage container delete [options] [container]
storage container set [options] [container]
Perintah untuk mengelola tanda tangan akses bersama dari kontainer Storage Anda
storage container sas create [options] [container] [permissions] [expiry]
Perintah untuk mengelola kebijakan akses tersimpan dari kontainer Storage Anda
storage container policy create [options] [container] [name]
storage container policy show [options] [container] [name]
storage container policy list [options] [container]
storage container policy set [options] [container] [name]
storage container policy delete [options] [container] [name]
Perintah untuk mengelola blob Storage Anda
storage blob list [options] [container] [prefix]
storage blob show [options] [container] [blob]
storage blob delete [options] [container] [blob]
storage blob upload [options] [file] [container] [blob]
storage blob download [options] [container] [blob] [destination]
Perintah untuk mengelola operasi penyalinan blob Anda
storage blob copy start [options] [sourceUri] [destContainer]
storage blob copy show [options] [container] [blob]
storage blob copy stop [options] [container] [blob] [copyid]
Perintah untuk mengelola tanda tangan akses bersama dari blob Storage Anda
storage blob sas create [options] [container] [blob] [permissions] [expiry]
Perintah untuk mengelola berbagi file Storage Anda
storage share create [options] [share]
storage share show [options] [share]
storage share delete [options] [share]
storage share list [options] [prefix]
Perintah untuk mengelola file Storage Anda
storage file list [options] [share] [path]
storage file delete [options] [share] [path]
storage file upload [options] [source] [share] [path]
storage file download [options] [share] [path] [destination]
Perintah untuk mengelola direktori file Storage Anda
storage directory create [options] [share] [path]
storage directory delete [options] [share] [path]
Perintah untuk mengelola antrean Storage Anda
storage queue create [options] [queue]
storage queue list [options] [prefix]
storage queue show [options] [queue]
storage queue delete [options] [queue]
Perintah untuk mengelola tanda tangan akses bersama dari antrean Storage Anda
storage queue sas create [options] [queue] [permissions] [expiry]
Perintah untuk mengelola kebijakan akses tersimpan dari antrean Storage Anda
storage queue policy create [options] [queue] [name]
storage queue policy show [options] [queue] [name]
storage queue policy list [options] [queue]
storage queue policy set [options] [queue] [name]
storage queue policy delete [options] [queue] [name]
Perintah untuk mengelola properti Storage logging Anda
storage logging show [options]
storage logging set [options]
Perintah untuk mengelola properti metrik Storage Anda
storage metrics show [options]
storage metrics set [options]
Perintah untuk mengelola tabel Storage Anda
storage table create [options] [table]
storage table list [options] [prefix]
storage table show [options] [table]
storage table delete [options] [table]
Perintah untuk mengelola tanda tangan akses bersama dari tabel Storage Anda
storage table sas create [options] [table] [permissions] [expiry]
Perintah untuk mengelola kebijakan akses tersimpan dari tabel Storage Anda
storage table policy create [options] [table] [name]
storage table policy show [options] [table] [name]
storage table policy list [options] [table]
storage table policy set [options] [table] [name]
storage table policy delete [options] [table] [name]
Tag
Menambahkan tag
tag create [options] <name> <value>
Menghapus seluruh tag atau nilai tag
tag delete [options] <name> <value>
Mencantumkan informasi tag
tag list [options]
Dapatkan tag
tag show [options] [name]
Komputer Virtual
Buat VM
vm create [options] <resource-group> <name> <location> <os-type>
Membuat VM dengan sumber daya default
vm quick-create [options] <resource-group> <name> <location> <os-type> <image-urn> <admin-username> <admin-password
Tip
Dimulai dengan CLI versi 0.10, Anda dapat memberikan alias pendek seperti "UbuntuLTS" atau "Win2012R2Datacenter" sebagai image-urn untuk beberapa gambar Marketplace populer. Jalankan azure help vm quick-create untuk opsi. Selain itu, dimulai dengan versi 0.10, azure vm quick-create menggunakan penyimpanan premium secara default jika tersedia di wilayah yang dipilih.
Mencantumkan mesin virtual dalam akun
vm list [options]
Dapatkan satu mesin virtual dalam grup sumber daya
vm show [options] <resource-group> <name>
Menghapus satu komputer virtual dalam grup sumber daya
vm delete [options] <resource-group> <name>
Mematikan satu komputer virtual dalam grup sumber daya
vm stop [options] <resource-group> <name>
Memulai ulang satu mesin virtual dalam grup sumber daya
vm restart [options] <resource-group> <name>
Memulai satu mesin virtual dalam grup sumber daya
vm start [options] <resource-group> <name>
Mematikan satu komputer virtual dalam grup sumber daya dan melepaskan sumber daya komputasi
vm deallocate [options] <resource-group> <name>
Daftar ukuran mesin virtual yang tersedia
vm sizes [options]
Menangkap VM sebagai OS Image atau VM Image
vm capture [options] <resource-group> <name> <vhd-name-prefix>
Mengatur status VM ke Generalized
vm generalize [options] <resource-group> <name>
Mendapatkan tampilan instans VM
vm get-instance-view [options] <resource-group> <name>
Memungkinkan Anda untuk mengatur ulang pengaturan Remote Desktop Access atau SSH pada Mesin Virtual dan untuk mengatur ulang kata sandi untuk akun yang memiliki administrator atau otoritas sudo
vm reset-access [options] <resource-group> <name>
Perbarui VM dengan data baru
vm set [options] <resource-group> <name>
Perintah untuk mengelola disk data Mesin Virtual Anda
vm disk attach-new [options] <resource-group> <vm-name> <size-in-gb> [vhd-name]
vm disk detach [options] <resource-group> <vm-name> <lun>
vm disk attach [options] <resource-group> <vm-name> [vhd-url]
Perintah untuk mengelola ekstensi sumber daya VM
vm extension set [options] <resource-group> <vm-name> <name> <publisher-name> <version>
vm extension get [options] <resource-group> <vm-name>
Perintah untuk mengelola Docker Virtual Machine Anda
vm docker create [options] <resource-group> <name> <location> <os-type>
Perintah untuk mengelola gambar VM
vm image list-publishers [options] <location>
vm image list-offers [options] <location> <publisher>
vm image list-skus [options] <location> <publisher> <offer>
vm image list [options] <location> <publisher> [offer] [sku]