Get-CsOnlineVoiceUser
Use the Get-CsOnlineVoiceUser cmdlet to retrieve a voice user's telephone number and location.
Syntax
Get-CsOnlineVoiceUser
[-CivicAddressId <XdsCivicAddressId>]
[-DomainController <Fqdn>]
[-EnterpriseVoiceStatus <MultiValuedProperty>]
[-ExpandLocation]
[-First <Unlimited>]
[-Force]
[-GetFromAAD]
[-GetPendingUsers]
[-Identity <UserIdParameter>]
[-LocationId <LocationID>]
[-NumberAssigned]
[-NumberNotAssigned]
[-PSTNConnectivity <MultiValuedProperty>]
[-SearchQuery <String>]
[-Skip <Unlimited>]
[-Tenant <Guid>]
[<CommonParameters>] Description
Note: This cmdlet is no longer supported on the public and GCC cloud instances. You should use the replacement cmdlets described here.
The following table lists the parameters to Get-CsOnlineVoiceUser and the alternative method of getting the same data using a combination of Get-CsOnlineUser, Get-CsPhoneNumberAssignment, Get-CsOnlineLisLocation, and Get-CsOnlineLisCivicAddress.
| Parameter | Description | Alternative |
|---|---|---|
| No parameters | Get information for all users | Get-CsOnlineUser -Filter {(FeatureTypes -contains 'PhoneSystem') -and (AccountEnabled -eq $True)} -AccountType User |
| CivicAddressId | Find phone number information where the assigned phone number is associated with the CivicAddressId | Get-CsPhoneNumberAssignment -CivicAddressId <CivicAddressId> |
| EnterpriseVoiceStatus | Find enabled users based on EnterpriseVoiceEnabled | Get-CsOnlineUser -Filter {(EnterpriseVoiceEnabled -eq $True) -and (FeatureTypes -contains 'PhoneSystem') -and (AccountEnabled -eq $True)} -AccountType User or Get-CsOnlineUser -Filter {(EnterpriseVoiceEnabled -eq $False) -and (FeatureTypes -contains 'PhoneSystem') -and (AccountEnabled -eq $True)} -AccountType User |
| ExpandLocation | Show information about the LocationId | Get-CsOnlineLisLocation -LocationId <LocationId> |
| Identity | Get information for a user | Get-CsOnlineUser -Identity <Identity> |
| LocationId | Find phone number information where the assigned phone number is associated with the LocationId | Get-CsPhoneNumberAssignment -LocationId <LocationId> |
| NumberAssigned | Find enabled users with a phone number assigned | Get-CsOnlineUser -Filter {(LineUri -ne $Null) -and (FeatureTypes -contains 'PhoneSystem') -and (AccountEnabled -eq $True)} -AccountType User |
| NumberNotAssigned | Find users without a phone number assigned | Get-CsOnlineUser -Filter {(LineUri -eq $Null) -and (FeatureTypes -contains 'PhoneSystem') -and (AccountEnabled -eq $True)} -AccountType User |
| PSTNConnectivity | Find enabled users with PhoneSystem (OnPremises) or CallingPlan (Online) | Online: Get-CsOnlineUser -Filter {(FeatureTypes -contains 'CallingPlan') -and (AccountEnabled -eq $True)} -AccountType User OnPremises: Get-CsOnlineUser -Filter {-not (FeatureTypes -contains 'CallingPlan') -and (FeatureTypes -contains 'PhoneSystem') -and (AccountEnabled -eq $True)} -AccountType User |
The following table lists the output fields from Get-CsOnlineVoiceUser and the alternative method of getting the same information using a combination of Get-CsOnlineUser, Get-CsPhoneNumberAssignment, and Get-CsOnlineLisLocation.
| Output field | Alternative |
|---|---|
| Name | DisplayName in the output from Get-CsOnlineUser |
| Id | Identity in the output from Get-CsOnlineUser |
| SipDomain | Extract SipDomain from the SipAddress in the output from Get-CsOnlineUser |
| DataCenter | Extract DataCenter from RegistrarPool in the output from Get-CsOnlineUser |
| TenantId | TenantId in the output from Get-CsOnlineUser |
| PstnConnectivity | FeatureTypes in the output from Get-CsOnlineUser. If FeatureTypes contains CallingPlan, PstnConnectivity is Online. If FeatureTypes contains PhoneSystem and does not contain CallingPlan, PstnConnectivity is OnPremises |
| UsageLocation | UsageLocation in the output from Get-CsOnlineUser |
| EnterpriseVoiceEnabled | EnterpriseVoiceEnabled in the output from Get-CsOnlineUser |
| Number | LineUri in the output from Get-CsOnlineUser. You can get same phone number format by doing LineUri.Replace('tel:+','') |
| Location | Use LocationId in the output from Get-CsPhoneNumberAssignment -AssignedPstnTargetId <Identity> as the input to Get-CsOnlineLisLocation -LocationId |
In Teams PowerShell Module version 3.0 and later in commercial cloud (and Teams PowerShell Module versions 5.0.1 and later in GCCH and DOD), the following improvements have been introduced for organizations using Teams:
- This cmdlet now accurately returns users who are voice-enabled (the older cmdlet in version 2.6.0 and earlier returned users without MCOEV* plans assigned).
- The result size is not limited to 100 users anymore (the older cmdlet in version 2.6.0 and earlier limited the result size to 100).
In Teams PowerShell Module version 2.6.2 and later in commercial cloud (and Teams PowerShell Module versions 5.0.1 and later in GCCH and DOD), the following attributes are deprecated for organizations with Teams users using the ExpandLocation parameter:
- Force
- NumberOfResultsToSkip
- CorrelationId
- Verb
- ResultSize
- LicenceState
In Teams PowerShell Module version 2.6.2 and later in commercial cloud (and Teams PowerShell Module versions 5.0.1 and later in GCCH and DOD), the following input parameters are deprecated for organizations with Teams users due to low or zero usage:
- DomainController
- Force
- GetFromAAD
- GetPendingUsers
- SearchQuery
- Skip
- Tenant
- Common Parameters
Examples
-------------------------- Example 1 --------------------------
PS C:\> Get-CsOnlineVoiceUser -Identity Ken.Myer@contoso.comThis example uses the User Principal Name (UPN) to retrieve the location and phone number information.
Parameters
-CivicAddressId
Specifies the identity of the civic address that is assigned to the target users.
| Type: | XdsCivicAddressId |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-DomainController
This parameter is reserved for internal Microsoft use.
| Type: | Fqdn |
| Aliases: | DC |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-EnterpriseVoiceStatus
Possible values are:
- All
- Enabled
- Disabled
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-ExpandLocation
Displays the location parameter with its value.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-First
Specifies the number of users to return. The default is 100.
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-Force
This parameter has been deprecated from Teams PowerShell Modules 3.0 and above due to limited usage.
The Force switch specifies whether to suppress warning and confirmation messages. It can be useful in scripting to suppress interactive prompts. If the Force switch isn't provided in the command, you're prompted for administrative input if required.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-GetFromAAD
This parameter has been deprecated from Teams PowerShell Modules 3.0 and above due to limited usage.
Use this switch to get the users from Microsoft Entra ID.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-GetPendingUsers
This parameter has been deprecated from Teams PowerShell Modules 3.0 and above due to limited usage.
Use this switch to get only the users in pending state.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-Identity
Specifies the identity of the target user. Acceptable values include:
Example: jphillips@contoso.com
Example: sip:jphillips@contoso.com
Example: 98403f08-577c-46dd-851a-f0460a13b03d
| Type: | UserIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-LocationId
Specifies the location identity of the location whose users will be returned.
You can find location identifiers by using the Get-CsOnlineLisLocation cmdlet.
| Type: | LocationID |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-NumberAssigned
If specified, the query will return users who have a phone number assigned.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-NumberNotAssigned
If specified, the query will return users who do not have a phone number assigned.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-PSTNConnectivity
Possible values are:
- All
- Online
- OnPremises
| Type: | MultiValuedProperty |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-SearchQuery
This parameter has been deprecated from Teams PowerShell Modules 3.0 and above due to limited usage.
The SearchQuery parameter specifies a search string or a query formatted using Keyword Query Language (KQL). For more details about KQL, see Keyword Query Language syntax reference (https://go.microsoft.com/fwlink/p/?linkid=269603).
If this parameter is empty, all users are returned.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-Skip
Specifies the number of users to skip. If you used the First parameter to return the first 50 users and wanted to get another 50, you could use -Skip 50 to avoid returning the first 50 you've already reviewed. The default is 0.
| Type: | Unlimited |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
-Tenant
This parameter has been deprecated from Teams PowerShell Modules 3.0 and above due to limited usage.
This parameter is reserved for internal Microsoft use.
| Type: | Guid |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Microsoft Teams |
Inputs
None
Outputs
Deserialized.Microsoft.Rtc.Management.Hosted.Bvd.Types.LacUser
Related Links
フィードバック
以下は間もなく提供いたします。2024 年を通じて、コンテンツのフィードバック メカニズムとして GitHub の issue を段階的に廃止し、新しいフィードバック システムに置き換えます。 詳細については、「https://aka.ms/ContentUserFeedback」を参照してください。
フィードバックの送信と表示