次の方法で共有


OID_DOT11_MPDU_MAX_LENGTH

Important  The Native 802.11 Wireless LAN interface is deprecated in Windows 10 and later. Please use the WLAN Device Driver Interface (WDI) instead. For more information about WDI, see WLAN Universal Windows driver model.

 

When queried, the OID_DOT11_MPDU_MAX_LENGTH object identifier (OID) requests that the miniport driver return the value of the IEEE 802.11 aMPDUMaxLength attribute for the current PHY type on the 802.11 station.

The data type for this OID is a ULONG value.

The aMPDUMaxLength attribute defines the maximum length, in bytes, of a MAC protocol data unit (MPDU) frame that the PHY can transmit or receive. The following table lists the values of this attribute for the various 802.11 PHY types supported.

PHY type aMPDUMaxLength value

dot11_phy_type_fhss

4095 bytes

dot11_phy_type_dsss

4-8191 bytes

dot11_phy_type_irbaseband

2500 bytes

dot11_phy_type_ofdm

4095 bytes

dot11_phy_type_hrdsss

4095 bytes

dot11_phy_type_erp

4095 bytes

 

Note  The dot11_phy_type_ht and dot11_phy_type_vht PHY types do not appear in the table, because they have no aMPDUMaxLength attribute.

 

If the miniport driver is operating in Extensible Station (ExtSTA) mode, the current PHY type is determined through the ExtSTA msDot11CurrentPhyID management information base (MIB) object. This MIB object specifies the index of the current PHY type within the 802.11 station's list of supported PHY types. For more information about this MIB object, see OID_DOT11_CURRENT_PHY_ID.

If the aMPDUMaxLength value changes, the miniport driver must make a media-specific NDIS_STATUS_DOT11_MPDU_MAX_LENGTH_CHANGED indication. This indication notifies the operating system of the change in the maximum MPDU length supported on the 802.11 station.

Requirements

Version

Available in Windows Vista and later versions of the Windows operating systems.

Header

Windot11.h (include Ndis.h)

See also

DOT11_PHY_TYPE

Native 802.11 Wireless LAN OIDs