Bewerken

Dial pad configuration

  • Artikel
  • Van toepassing op:
    Microsoft Teams

In the Teams client, the dial pad enables users to access Public Switched Telephone Network (PSTN) functionality. The dial pad is available for users with a Teams Phone license, provided they're configured properly. The following criteria are all required for the dial pad to show:

  • User has an enabled Teams Phone ("MCOEV") license
  • User has Microsoft Calling Plan, Operator Connect, or is enabled for Direct Routing
  • User has Enterprise Voice enabled
  • User is homed online and not in Skype for Business on premises
  • User has Teams Calling Policy enabled

Note

If Shared Calling is available in your tenant and you've users who are homed online and enabled for Enterprise Voice, the dial pad shows in Teams for those users. For more information, see Plan for Shared Calling.

The following sections describe how to use PowerShell to check the criteria. In most cases, you need to look at various properties in the output of the Get-CsOnlineUser cmdlet. Examples assume $user is either the UPN (UserPrincipalName) or SIP address of the user.

User has an enabled Teams Phone ("MCOEV") license

Make sure that the assigned plan for the user shows the CapabilityStatus attribute set to Enabled and the Capability set to MCOEV (Teams Phone license). You might see MCOEV, MCOEV1, and so on. All are acceptable--as long as the Capability starts with MCOEV. For more information on the Teams Phone license, see Microsoft Teams add-on licensing.

To check that the attributes are set correctly, use the following command:

(Get-CsOnlineUser -Identity $user).AssignedPlan

The output will look like the following. You only need to check the CapabilityStatus and the Capability attributes:

AssignedTimestamp   Capability      CapabilityStatus ServiceInstance                          ServicePlanId
-----------------   ----------      ---------------- ---------------                          -------------
07-02-2020 12:28:48 MCOEV           Enabled          MicrosoftCommunicationsOnline/NOAM-4A-S7 4828c8ec-dc2e-4779-b502-...
07-02-2020 12:28:48 Teams           Enabled          TeamspaceAPI/NA001                       57ff2da0-773e-42df-b2af-...

User has Microsoft Calling Plan, Operator Connect OR is enabled for Direct Routing

If the user has Microsoft Calling Plan, make sure that the CapabilityStatus attribute is set to Enabled, and that the Capability is set to MCOPSTN. You might see MCOPSTN1, MCOPSTN2, and so on. All are acceptable--as long as the Capability starts with MCOPSTN.

To check the attributes, use the following command:

(Get-CsOnlineUser -Identity $user).AssignedPlan

The output will look like the following. You only need to check the CapabilityStatus and the Capability attributes:

AssignedTimestamp   Capability      CapabilityStatus ServiceInstance                          ServicePlanId
-----------------   ----------      ---------------- ---------------                          -------------
07-02-2020 12:28:48 MCOEV           Enabled          MicrosoftCommunicationsOnline/NOAM-4A-S7 4828c8ec-dc2e-4779-b502-...
07-02-2020 12:28:48 MCOPSTN2        Enabled          MicrosoftCommunicationsOnline/NOAM-4A-S7 5a10155d-f5c1-411a-a8ec-...
07-02-2020 12:28:48 Teams           Enabled          TeamspaceAPI/NA001                       57ff2da0-773e-42df-b2af-...

If the user is enabled for Operator Connect, the user must have a non-null value for TeamsCarrierEmergencyCallRoutingPolicy. To check the attribute, use the following command:

Get-CsOnlineUser -Identity $user|Select TeamsCarrierEmergencyCallRoutingPolicy

The output should have a non-null value, for example:

TeamsCarrierEmergencyCallRoutingPolicy
--------------------------------------
Synergy_98d1a5cb-d3e6-4306-885e-69a95f2da5c3

If the user is enabled for Direct Routing, the user must be assigned a non-null value for OnlineVoiceRoutingPolicy. To check the attribute, use the following command:

Get-CsOnlineUser -Identity $user|Select OnlineVoiceRoutingPolicy

The output should have a non-null value, for example:

OnlineVoiceRoutingPolicy
------------------------
Test_Policy

User has Enterprise Voice enabled

To check if the user has Enterprise Voice enabled, use the following command:

Get-CsOnlineUser -Identity $user|Select EnterpriseVoiceEnabled

The output should look like:

EnterpriseVoiceEnabled
----------------------
                  True

User is homed online and not in Skype for Business on premises

To ensure the user is homed online and not in Skype for Business on premises, the RegistrarPool must not be null and the HostingProvider must contain a value that starts with "sipfed.online." To check the values, use the following command:

Get-CsOnlineUser -Identity $user|Select RegistrarPool, HostingProvider

The output should be similar to:

RegistrarPool                 HostingProvider
-------------                 ---------------
sippoolbn10M02.infra.lync.com sipfed.online.lync.com

User has Teams Calling Policy enabled

The user's effective TeamsCallingPolicy must have AllowPrivateCalling set to true. By default, users inherit the global policy, which has AllowPrivateCallingPolicy set to true by default.

To get the TeamsCallingPolicy for a user and to check that AllowPrivateCalling is set to true, use the following command:

if (($p=Get-CsUserPolicyAssignment -Identity $user -PolicyType TeamsCallingPolicy) -eq $null) {Get-CsTeamsCallingPolicy -Identity Global} else {Get-CsTeamsCallingPolicy -Identity $p.PolicyName}

The output should look like:

Identity                   : Global
Description                :
AllowPrivateCalling        : True
AllowWebPSTNCalling        : True
AllowVoicemail             : UserOverride
AllowCallGroups            : True
AllowDelegation            : True
AllowCallForwardingToUser  : True
AllowCallForwardingToPhone : True
PreventTollBypass          : False
BusyOnBusyEnabledType      : Disabled
MusicOnHoldEnabledType     : Enabled

Additional notes

  • You might need to restart the Teams client after making any of these configuration changes.

  • If you recently updated any of the above criteria, you might need to wait a few hours for the client to receive the new settings.

  • If you still don't see the dial pad, check if there's a provisioning error by using the following command:

    Get-CsOnlineUser -Identity $user|Select UserValidationErrors

  • If it's been more than 24 hours and you're still seeing problems, contact Support.