ExceptionHandlingClauseOptions Wyliczenie

Definicja

Przestrzeń nazw:

System.Reflection

Zestaw:

System.Runtime.dll

Identyfikuje rodzaje klauzul obsługi wyjątków.

To wyliczenie obsługuje bitową kombinację jego wartości składowych.

public enum class ExceptionHandlingClauseOptions

[System.Flags]
public enum ExceptionHandlingClauseOptions

[<System.Flags>]
type ExceptionHandlingClauseOptions = 

Public Enum ExceptionHandlingClauseOptions

Dziedziczenie

Object

ValueType

Enum

ExceptionHandlingClauseOptions

Atrybuty

FlagsAttribute

Pola

Clause	0	Klauzula akceptuje wszystkie wyjątki pochodzące z określonego typu.
Fault	4	Klauzula jest wykonywana, jeśli wystąpi wyjątek, ale nie po zakończeniu normalnego przepływu sterowania.
Filter	1	Klauzula zawiera instrukcje określone przez użytkownika, które określają, czy wyjątek powinien być ignorowany (czyli czy normalne wykonywanie powinno zostać wznowione), obsługiwane przez skojarzoną procedurę obsługi lub przekazywane do następnej klauzuli.
Finally	2	Klauzula jest wykonywana za każdym razem, gdy blok try zakończy działanie, niezależnie od tego, czy jest to normalny przepływ sterowania, czy też z powodu nieobsługiwanego wyjątku.

Przykłady

Poniższy przykład kodu definiuje metodę testową o nazwie MethodBodyExamplei wyświetla informacje o zmiennej lokalnej oraz klauzule obsługi wyjątków. Metoda MethodBase.GetMethodBody służy do uzyskiwania MethodBody obiektu dla metody testowej. Właściwość ExceptionHandlingClauses służy do uzyskiwania listy obiektów i wyświetlania ExceptionHandlingClause ich właściwości.

Ten kod jest częścią większego przykładu udostępnionego MethodBody dla klasy.

#using <System.dll>

using namespace System;
using namespace System::Reflection;

public ref class Example
{
    // The Main method contains code to analyze this method, using
    // the properties and methods of the MethodBody class.
public:
    void MethodBodyExample(Object^ arg)
    {
        // Define some local variables. In addition to these variables,
        // the local variable list includes the variables scoped to 
        // the catch clauses.
        int var1 = 42;
        String^ var2 = "Forty-two";

        try
        {
            // Depending on the input value, throw an ArgumentException or 
            // an ArgumentNullException to test the Catch clauses.
            if (arg == nullptr)
            {
                throw gcnew ArgumentNullException("The argument cannot " +
                    "be null.");
            }
            if (arg->GetType() == String::typeid)
            {
                throw gcnew ArgumentException("The argument cannot " + 
                    "be a string.");
            }        
        }

        // There is no Filter clause in this code example. See the Visual 
        // Basic code for an example of a Filter clause.

        // This catch clause handles the ArgumentException class, and
        // any other class derived from Exception.
        catch (ArgumentException^ ex)
        {
            Console::WriteLine("Ordinary exception-handling clause caught:" +
                " {0}", ex->GetType());
        }        
        finally
        {
            var1 = 3033;
            var2 = "Another string.";
        }
    }
};

int main()
{ 
    // Get method body information.
    MethodInfo^ mi = 
        Example::typeid->GetMethod("MethodBodyExample");

    MethodBody^ mb = mi->GetMethodBody();
    Console::WriteLine("\r\nMethod: {0}", mi);

    // Display the general information included in the 
    // MethodBody object.
    Console::WriteLine("    Local variables are initialized: {0}", 
        mb->InitLocals);
    Console::WriteLine("    Maximum number of items on the operand " +
        "stack: {0}", mb->MaxStackSize);

using System;
using System.Reflection;

public class Example
{
    public static void Main()
    {
        // Get method body information.
        MethodInfo mi = typeof(Example).GetMethod("MethodBodyExample");
        MethodBody mb = mi.GetMethodBody();
        Console.WriteLine("\r\nMethod: {0}", mi);

        // Display the general information included in the
        // MethodBody object.
        Console.WriteLine("    Local variables are initialized: {0}",
            mb.InitLocals);
        Console.WriteLine("    Maximum number of items on the operand stack: {0}",
            mb.MaxStackSize);

Imports System.Reflection

Public Class Example

    Public Shared Sub Main()

        ' Demonstrate the effect of the Visual Basic When keyword, which
        ' generates a Filter clause in the Try block.
        Dim e As New Example()
        Console.WriteLine()
        e.MethodBodyExample("String argument")
        e.MethodBodyExample(Nothing)

        ' Get method body information.
        Dim mi As MethodInfo = _
            GetType(Example).GetMethod("MethodBodyExample")
        Dim mb As MethodBody = mi.GetMethodBody()
        Console.WriteLine(vbCrLf & "Method: {0}", mi)

        ' Display the general information included in the 
        ' MethodBody object.
        Console.WriteLine("    Local variables are initialized: {0}", _
            mb.InitLocals)
        Console.WriteLine("    Maximum number of items on the operand stack: {0}", _
            mb.MaxStackSize)

// Display exception handling clauses.
Console::WriteLine();
for each(ExceptionHandlingClause^ exhc in mb->ExceptionHandlingClauses)
{
    Console::WriteLine(exhc->Flags.ToString());

    // The FilterOffset property is meaningful only for Filter
    // clauses. The CatchType property is not meaningful for 
    // Filter or Finally clauses. 
    switch(exhc->Flags)
    {
    case ExceptionHandlingClauseOptions::Filter:
        Console::WriteLine("        Filter Offset: {0}", 
            exhc->FilterOffset);
        break;
    case ExceptionHandlingClauseOptions::Finally:
        break;
    default:
        Console::WriteLine("    Type of exception: {0}", 
            exhc->CatchType);
        break;
    }

    Console::WriteLine("       Handler Length: {0}",
        exhc->HandlerLength);
    Console::WriteLine("       Handler Offset: {0}", 
        exhc->HandlerOffset);
    Console::WriteLine("     Try Block Length: {0}", exhc->TryLength);
    Console::WriteLine("     Try Block Offset: {0}", exhc->TryOffset);
}

// Display exception handling clauses.
Console.WriteLine();
foreach (ExceptionHandlingClause ehc in mb.ExceptionHandlingClauses)
{
    Console.WriteLine(ehc.Flags.ToString());

    // The FilterOffset property is meaningful only for Filter
    // clauses. The CatchType property is not meaningful for
    // Filter or Finally clauses.
    switch (ehc.Flags)
    {
        case ExceptionHandlingClauseOptions.Filter:
            Console.WriteLine("        Filter Offset: {0}",
                ehc.FilterOffset);
            break;
        case ExceptionHandlingClauseOptions.Finally:
            break;
        default:
            Console.WriteLine("    Type of exception: {0}",
                ehc.CatchType);
            break;
    }

    Console.WriteLine("       Handler Length: {0}", ehc.HandlerLength);
    Console.WriteLine("       Handler Offset: {0}", ehc.HandlerOffset);
    Console.WriteLine("     Try Block Length: {0}", ehc.TryLength);
    Console.WriteLine("     Try Block Offset: {0}", ehc.TryOffset);
}

' Display exception handling clauses.
Console.WriteLine()
For Each ehc As ExceptionHandlingClause In mb.ExceptionHandlingClauses
    Console.WriteLine(ehc.Flags.ToString())

    ' The FilterOffset property is meaningful only for Filter
    ' clauses. The CatchType property is not meaningful for 
    ' Filter or Finally clauses. 
    Select Case ehc.Flags
        Case ExceptionHandlingClauseOptions.Filter
            Console.WriteLine("        Filter Offset: {0}", _
                ehc.FilterOffset)
        Case ExceptionHandlingClauseOptions.Finally
        Case Else
            Console.WriteLine("    Type of exception: {0}", _
                ehc.CatchType)
    End Select

    Console.WriteLine("       Handler Length: {0}", ehc.HandlerLength)
    Console.WriteLine("       Handler Offset: {0}", ehc.HandlerOffset)
    Console.WriteLine("     Try Block Length: {0}", ehc.TryLength)
    Console.WriteLine("     Try Block Offset: {0}", ehc.TryOffset)
Next

    // The Main method contains code to analyze this method, using
    // the properties and methods of the MethodBody class.
public:
    void MethodBodyExample(Object^ arg)
    {
        // Define some local variables. In addition to these variables,
        // the local variable list includes the variables scoped to 
        // the catch clauses.
        int var1 = 42;
        String^ var2 = "Forty-two";

        try
        {
            // Depending on the input value, throw an ArgumentException or 
            // an ArgumentNullException to test the Catch clauses.
            if (arg == nullptr)
            {
                throw gcnew ArgumentNullException("The argument cannot " +
                    "be null.");
            }
            if (arg->GetType() == String::typeid)
            {
                throw gcnew ArgumentException("The argument cannot " + 
                    "be a string.");
            }        
        }

        // There is no Filter clause in this code example. See the Visual 
        // Basic code for an example of a Filter clause.

        // This catch clause handles the ArgumentException class, and
        // any other class derived from Exception.
        catch (ArgumentException^ ex)
        {
            Console::WriteLine("Ordinary exception-handling clause caught:" +
                " {0}", ex->GetType());
        }        
        finally
        {
            var1 = 3033;
            var2 = "Another string.";
        }
    }

    }

    // The Main method contains code to analyze this method, using
    // the properties and methods of the MethodBody class.
    public void MethodBodyExample(object arg)
    {
        // Define some local variables. In addition to these variables,
        // the local variable list includes the variables scoped to
        // the catch clauses.
        int var1 = 42;
        string var2 = "Forty-two";

        try
        {
            // Depending on the input value, throw an ArgumentException or
            // an ArgumentNullException to test the Catch clauses.
            if (arg == null)
            {
                throw new ArgumentNullException("The argument cannot be null.");
            }
            if (arg.GetType() == typeof(string))
            {
                throw new ArgumentException("The argument cannot be a string.");
            }
        }

        // This filter clause selects only exceptions that derive
        // from the ArgumentException class.
        // Other exceptions, including ArgumentException itself,
        // are not handled by this filter clause.
        catch (ArgumentException ex) when (ex.GetType().IsSubclassOf(typeof(ArgumentException)))
        {
            Console.WriteLine("Filter clause caught: {0}", ex.GetType());
        }

        // This catch clause handles the ArgumentException class, and
        // any other class derived from Exception.
        catch(Exception ex)
        {
            Console.WriteLine("Ordinary exception-handling clause caught: {0}",
                ex.GetType());
        }
        finally
        {
            var1 = 3033;
            var2 = "Another string.";
        }
    }
}

// This code example produces output similar to the following:
//
//Method: Void MethodBodyExample(System.Object)
//    Local variables are initialized: True
//    Maximum number of items on the operand stack: 2

    End Sub

    ' This test method is executed at the beginning of Main, to show
    ' how the Filter clause works. The Filter clause is generated by 
    ' a Visual Basic When expression. If arg is Nothing, this method
    ' throws ArgumentNullException, which is caught by the filter
    ' clause. If arg is a string, the method throws ArgumentException,
    ' which does not match the filter clause.
    '
    ' Sub Main also contains code to analyze this method, using 
    ' the properties and methods of the MethodBody class.
    Public Sub MethodBodyExample(ByVal arg As Object)

        ' Define some local variables. In addition to these variables,
        ' the local variable list includes the variables scoped to 
        ' the catch clauses.
        Dim var1 As Integer = 42
        Dim var2 As String = "Forty-two"

        Try
            ' Depending on the input value, throw an ArgumentException or 
            ' an ArgumentNullException to test the Catch clauses.
            '
            If arg Is Nothing Then
                Throw New ArgumentNullException("The argument cannot be Nothing.")
            End If
            If arg.GetType() Is GetType(String) Then
                Throw New ArgumentException("The argument cannot be a string.")
            End If
        
        ' The When expression makes this a filter clause. The expression 
        ' selects only exceptions that derive from the ArgumentException
        ' class. Other exceptions, including ArgumentException itself, 
        ' are not handled by this filter clause.
        Catch ex As ArgumentException _
            When ex.GetType().IsSubclassOf(GetType(ArgumentException))

            Console.WriteLine("Filter clause caught: {0}", ex.GetType())
        
        ' This catch clause handles the ArgumentException class, and
        ' any other class derived from Exception.
        Catch ex As Exception
            Console.WriteLine("Ordinary exception-handling clause caught: {0}", _
                ex.GetType())

        Finally
            var1 = 3033
            var2 = "Another string."
        End Try
    End Sub
End Class

' This code example produces output similar to the following:
'
'Ordinary exception-handling clause caught: System.ArgumentException
'Filter clause caught: System.ArgumentNullException
'
'Method: Void MethodBodyExample(System.Object)
'    Local variables are initialized: True
'    Maximum number of items on the operand stack: 3

//Clause
//    Type of exception: System.ArgumentException
//       Handler Length: 29
//       Handler Offset: 78
//     Try Block Length: 65
//     Try Block Offset: 13
//Finally
//       Handler Length: 13
//       Handler Offset: 113
//     Try Block Length: 100
//     Try Block Offset: 13

//
//Filter
//      Filter Offset: 71
//      Handler Length: 23
//      Handler Offset: 116
//      Try Block Length: 61
//      Try Block Offset: 10
//Clause
//    Type of exception: System.Exception
//       Handler Length: 21
//       Handler Offset: 70
//     Try Block Length: 61
//     Try Block Offset: 9
//Finally
//       Handler Length: 14
//       Handler Offset: 94
//     Try Block Length: 85
//     Try Block Offset: 9

'
'Filter
'        Filter Offset: 0
'       Handler Length: 19
'       Handler Offset: 99
'     Try Block Length: 45
'     Try Block Offset: 9
'Clause
'    Type of exception: System.Exception
'       Handler Length: 25
'       Handler Offset: 118
'     Try Block Length: 45
'     Try Block Offset: 9
'Finally
'       Handler Length: 13
'       Handler Offset: 153
'     Try Block Length: 144
'     Try Block Offset: 9

Uwagi

Aby zbadać klauzule obsługi wyjątków w metodzie, uzyskaj obiekt i wywołaj GetMethodBody metodę MethodInfo w celu uzyskania treści metody. ExceptionHandlingClauses Użyj właściwości , aby uzyskać listę ExceptionHandlingClause obiektów.

Uwaga

Praca z klauzulami obsługi wyjątków wymaga dokładnego zrozumienia metadanych i Microsoft formatów instrukcji języka pośredniego (MSIL). Informacje można znaleźć w dokumentacji infrastruktury języka wspólnego (CLI), zwłaszcza "Partition II: Metadata Definition and Semantics" (Partycja II: definicja metadanych i semantyka).

Zobacz też

• MethodBody
• ExceptionHandlingClause