Policy CSP - Power
Tip
This CSP contains ADMX-backed policies which require a special SyncML format to enable or disable. You must specify the data type in the SyncML as <Format>chr</Format>. For details, see Understanding ADMX-backed policies.
The payload of the SyncML must be XML-encoded; for this XML encoding, there are a variety of online encoders that you can use. To avoid encoding the payload, you can use CDATA if your MDM supports it. For more information, see CDATA Sections.
AllowHibernate
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 11, version 21H2 [10.0.22000] and later |
./Device/Vendor/MSFT/Policy/Config/Power/AllowHibernate
This policy setting decides if hibernate on the machine is allowed or not. Supported values: 0 - Disable hibernate. 1 (default) - Allow hibernate.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Default Value | 1 |
Allowed values:
| Value | Description |
|---|---|
| 0 | Disable hibernate. |
| 1 (Default) | Allow hibernate. |
AllowStandbyStatesWhenSleepingOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1803 [10.0.17134] and later |
./Device/Vendor/MSFT/Policy/Config/Power/AllowStandbyStatesWhenSleepingOnBattery
This policy setting manages whether or not Windows is allowed to use standby states when putting the computer in a sleep state.
If you enable or don't configure this policy setting, Windows uses standby states to put the computer in a sleep state.
If you disable this policy setting, standby states (S1-S3) aren't allowed.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | AllowStandbyStatesDC_2 |
| Friendly Name | Allow standby states (S1-S3) when sleeping (on battery) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\abfc2519-3608-4c2a-94ea-171b0ed546ab |
| Registry Value Name | DCSettingIndex |
| ADMX File Name | Power.admx |
AllowStandbyWhenSleepingPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1703 [10.0.15063] and later |
./Device/Vendor/MSFT/Policy/Config/Power/AllowStandbyWhenSleepingPluggedIn
This policy setting manages whether or not Windows is allowed to use standby states when putting the computer in a sleep state.
If you enable or don't configure this policy setting, Windows uses standby states to put the computer in a sleep state.
If you disable this policy setting, standby states (S1-S3) aren't allowed.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | AllowStandbyStatesAC_2 |
| Friendly Name | Allow standby states (S1-S3) when sleeping (plugged in) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\abfc2519-3608-4c2a-94ea-171b0ed546ab |
| Registry Value Name | ACSettingIndex |
| ADMX File Name | Power.admx |
DisplayOffTimeoutOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1709 [10.0.16299] and later |
./Device/Vendor/MSFT/Policy/Config/Power/DisplayOffTimeoutOnBattery
This policy setting allows you to specify the period of inactivity before Windows turns off the display.
If you enable this policy setting, you must provide a value, in seconds, indicating how much idle time should elapse before Windows turns off the display.
If you disable or don't configure this policy setting, users control this setting.
If the user has configured a slide show to run on the lock screen when the machine is locked, this can prevent the display from turning off. The "Prevent enabling lock screen slide show" policy setting can be used to disable the slide show feature.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | VideoPowerDownTimeOutDC_2 |
| Friendly Name | Turn off the display (on battery) |
| Location | Computer Configuration |
| Path | System > Power Management > Video and Display Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\3C0BC021-C8A8-4E07-A973-6B14CBCB2B7E |
| ADMX File Name | Power.admx |
DisplayOffTimeoutPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1709 [10.0.16299] and later |
./Device/Vendor/MSFT/Policy/Config/Power/DisplayOffTimeoutPluggedIn
This policy setting allows you to specify the period of inactivity before Windows turns off the display.
If you enable this policy setting, you must provide a value, in seconds, indicating how much idle time should elapse before Windows turns off the display.
If you disable or don't configure this policy setting, users control this setting.
If the user has configured a slide show to run on the lock screen when the machine is locked, this can prevent the display from turning off. The "Prevent enabling lock screen slide show" policy setting can be used to disable the slide show feature.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | VideoPowerDownTimeOutAC_2 |
| Friendly Name | Turn off the display (plugged in) |
| Location | Computer Configuration |
| Path | System > Power Management > Video and Display Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\3C0BC021-C8A8-4E07-A973-6B14CBCB2B7E |
| ADMX File Name | Power.admx |
EnergySaverBatteryThresholdOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/EnergySaverBatteryThresholdOnBattery
This policy setting allows you to specify battery charge level at which Energy Saver is turned on.
If you enable this policy setting, you must provide a percent value, indicating the battery charge level. Energy Saver will be automatically turned on at (and below) the specified level.
If you disable or don't configure this policy setting, users control this setting.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Allowed Values | Range: [0-100] |
| Default Value | 0 |
Group policy mapping:
| Name | Value |
|---|---|
| Name | EsBattThresholdDC |
| Friendly Name | Energy Saver Battery Threshold (on battery) |
| Element Name | Energy Saver Battery Threshold (percent) |
| Location | Computer Configuration |
| Path | System > Power Management > Energy Saver Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\E69653CA-CF7F-4F05-AA73-CB833FA90AD4 |
| ADMX File Name | Power.admx |
EnergySaverBatteryThresholdPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/EnergySaverBatteryThresholdPluggedIn
This policy setting allows you to specify battery charge level at which Energy Saver is turned on.
If you enable this policy setting, you must provide a percent value, indicating the battery charge level. Energy Saver will be automatically turned on at (and below) the specified level.
If you disable or don't configure this policy setting, users control this setting.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Allowed Values | Range: [0-100] |
| Default Value | 0 |
Group policy mapping:
| Name | Value |
|---|---|
| Name | EsBattThresholdAC |
| Friendly Name | Energy Saver Battery Threshold (plugged in) |
| Element Name | Energy Saver Battery Threshold (percent) |
| Location | Computer Configuration |
| Path | System > Power Management > Energy Saver Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\E69653CA-CF7F-4F05-AA73-CB833FA90AD4 |
| ADMX File Name | Power.admx |
HibernateTimeoutOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1709 [10.0.16299] and later |
./Device/Vendor/MSFT/Policy/Config/Power/HibernateTimeoutOnBattery
This policy setting allows you to specify the period of inactivity before Windows transitions the system to hibernate.
If you enable this policy setting, you must provide a value, in seconds, indicating how much idle time should elapse before Windows transitions to hibernate.
If you disable or don't configure this policy setting, users control this setting.
If the user has configured a slide show to run on the lock screen when the machine is locked, this can prevent the sleep transition from occurring. The "Prevent enabling lock screen slide show" policy setting can be used to disable the slide show feature.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | DCHibernateTimeOut_2 |
| Friendly Name | Specify the system hibernate timeout (on battery) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\9D7815A6-7EE4-497E-8888-515A05F02364 |
| ADMX File Name | Power.admx |
HibernateTimeoutPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1709 [10.0.16299] and later |
./Device/Vendor/MSFT/Policy/Config/Power/HibernateTimeoutPluggedIn
This policy setting allows you to specify the period of inactivity before Windows transitions the system to hibernate.
If you enable this policy setting, you must provide a value, in seconds, indicating how much idle time should elapse before Windows transitions to hibernate.
If you disable or don't configure this policy setting, users control this setting.
If the user has configured a slide show to run on the lock screen when the machine is locked, this can prevent the sleep transition from occurring. The "Prevent enabling lock screen slide show" policy setting can be used to disable the slide show feature.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | ACHibernateTimeOut_2 |
| Friendly Name | Specify the system hibernate timeout (plugged in) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\9D7815A6-7EE4-497E-8888-515A05F02364 |
| ADMX File Name | Power.admx |
RequirePasswordWhenComputerWakesOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1703 [10.0.15063] and later |
./Device/Vendor/MSFT/Policy/Config/Power/RequirePasswordWhenComputerWakesOnBattery
This policy setting specifies whether or not the user is prompted for a password when the system resumes from sleep.
If you enable or don't configure this policy setting, the user is prompted for a password when the system resumes from sleep.
If you disable this policy setting, the user isn't prompted for a password when the system resumes from sleep.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | DCPromptForPasswordOnResume_2 |
| Friendly Name | Require a password when a computer wakes (on battery) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51 |
| Registry Value Name | DCSettingIndex |
| ADMX File Name | Power.admx |
RequirePasswordWhenComputerWakesPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1703 [10.0.15063] and later |
./Device/Vendor/MSFT/Policy/Config/Power/RequirePasswordWhenComputerWakesPluggedIn
This policy setting specifies whether or not the user is prompted for a password when the system resumes from sleep.
If you enable or don't configure this policy setting, the user is prompted for a password when the system resumes from sleep.
If you disable this policy setting, the user isn't prompted for a password when the system resumes from sleep.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | ACPromptForPasswordOnResume_2 |
| Friendly Name | Require a password when a computer wakes (plugged in) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\0e796bdb-100d-47d6-a2d5-f7d2daa51f51 |
| Registry Value Name | ACSettingIndex |
| ADMX File Name | Power.admx |
SelectLidCloseActionOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/SelectLidCloseActionOnBattery
This policy setting specifies the action that Windows takes when a user closes the lid on a mobile PC.
Possible actions include:
-Take no action -Sleep -Hibernate -Shut down.
If you enable this policy setting, you must select the desired action.
If you disable this policy setting or don't configure it, users can see and change this setting.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Default Value | 1 |
Allowed values:
| Value | Description |
|---|---|
| 0 | Take no action. |
| 1 (Default) | Sleep. |
| 2 | System hibernate sleep state. |
| 3 | System shutdown. |
Group policy mapping:
| Name | Value |
|---|---|
| Name | DCSystemLidAction_2 |
| Friendly Name | Select the lid switch action (on battery) |
| Element Name | Lid Switch Action. |
| Location | Computer Configuration |
| Path | System > Power Management > Button Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\5CA83367-6E45-459F-A27B-476B1D01C936 |
| ADMX File Name | Power.admx |
SelectLidCloseActionPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/SelectLidCloseActionPluggedIn
This policy setting specifies the action that Windows takes when a user closes the lid on a mobile PC.
Possible actions include:
-Take no action -Sleep -Hibernate -Shut down.
If you enable this policy setting, you must select the desired action.
If you disable this policy setting or don't configure it, users can see and change this setting.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Default Value | 1 |
Allowed values:
| Value | Description |
|---|---|
| 0 | Take no action. |
| 1 (Default) | Sleep. |
| 2 | System hibernate sleep state. |
| 3 | System shutdown. |
Group policy mapping:
| Name | Value |
|---|---|
| Name | ACSystemLidAction_2 |
| Friendly Name | Select the lid switch action (plugged in) |
| Element Name | Lid Switch Action. |
| Location | Computer Configuration |
| Path | System > Power Management > Button Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\5CA83367-6E45-459F-A27B-476B1D01C936 |
| ADMX File Name | Power.admx |
SelectPowerButtonActionOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/SelectPowerButtonActionOnBattery
This policy setting specifies the action that Windows takes when a user presses the power button.
Possible actions include:
-Take no action -Sleep -Hibernate -Shut down.
If you enable this policy setting, you must select the desired action.
If you disable this policy setting or don't configure it, users can see and change this setting.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Default Value | 1 |
Allowed values:
| Value | Description |
|---|---|
| 0 | Take no action. |
| 1 (Default) | Sleep. |
| 2 | System hibernate sleep state. |
| 3 | System shutdown. |
Group policy mapping:
| Name | Value |
|---|---|
| Name | DCPowerButtonAction_2 |
| Friendly Name | Select the Power button action (on battery) |
| Element Name | Power Button Action. |
| Location | Computer Configuration |
| Path | System > Power Management > Button Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\7648EFA3-DD9C-4E3E-B566-50F929386280 |
| ADMX File Name | Power.admx |
SelectPowerButtonActionPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/SelectPowerButtonActionPluggedIn
This policy setting specifies the action that Windows takes when a user presses the power button.
Possible actions include:
-Take no action -Sleep -Hibernate -Shut down.
If you enable this policy setting, you must select the desired action.
If you disable this policy setting or don't configure it, users can see and change this setting.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Default Value | 1 |
Allowed values:
| Value | Description |
|---|---|
| 0 | Take no action. |
| 1 (Default) | Sleep. |
| 2 | System hibernate sleep state. |
| 3 | System shutdown. |
Group policy mapping:
| Name | Value |
|---|---|
| Name | ACPowerButtonAction_2 |
| Friendly Name | Select the Power button action (plugged in) |
| Element Name | Power Button Action. |
| Location | Computer Configuration |
| Path | System > Power Management > Button Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\7648EFA3-DD9C-4E3E-B566-50F929386280 |
| ADMX File Name | Power.admx |
SelectSleepButtonActionOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/SelectSleepButtonActionOnBattery
This policy setting specifies the action that Windows takes when a user presses the sleep button.
Possible actions include:
-Take no action -Sleep -Hibernate -Shut down.
If you enable this policy setting, you must select the desired action.
If you disable this policy setting or don't configure it, users can see and change this setting.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Default Value | 1 |
Allowed values:
| Value | Description |
|---|---|
| 0 | Take no action. |
| 1 (Default) | Sleep. |
| 2 | System hibernate sleep state. |
| 3 | System shutdown. |
Group policy mapping:
| Name | Value |
|---|---|
| Name | DCSleepButtonAction_2 |
| Friendly Name | Select the Sleep button action (on battery) |
| Element Name | Sleep Button Action. |
| Location | Computer Configuration |
| Path | System > Power Management > Button Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\96996BC0-AD50-47EC-923B-6F41874DD9EB |
| ADMX File Name | Power.admx |
SelectSleepButtonActionPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/SelectSleepButtonActionPluggedIn
This policy setting specifies the action that Windows takes when a user presses the sleep button.
Possible actions include:
-Take no action -Sleep -Hibernate -Shut down.
If you enable this policy setting, you must select the desired action.
If you disable this policy setting or don't configure it, users can see and change this setting.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Default Value | 1 |
Allowed values:
| Value | Description |
|---|---|
| 0 | Take no action. |
| 1 (Default) | Sleep. |
| 2 | System hibernate sleep state. |
| 3 | System shutdown. |
Group policy mapping:
| Name | Value |
|---|---|
| Name | ACSleepButtonAction_2 |
| Friendly Name | Select the Sleep button action (plugged in) |
| Element Name | Sleep Button Action. |
| Location | Computer Configuration |
| Path | System > Power Management > Button Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\96996BC0-AD50-47EC-923B-6F41874DD9EB |
| ADMX File Name | Power.admx |
StandbyTimeoutOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1709 [10.0.16299] and later |
./Device/Vendor/MSFT/Policy/Config/Power/StandbyTimeoutOnBattery
This policy setting allows you to specify the period of inactivity before Windows transitions the system to sleep.
If you enable this policy setting, you must provide a value, in seconds, indicating how much idle time should elapse before Windows transitions to sleep.
If you disable or don't configure this policy setting, users control this setting.
If the user has configured a slide show to run on the lock screen when the machine is locked, this can prevent the sleep transition from occurring. The "Prevent enabling lock screen slide show" policy setting can be used to disable the slide show feature.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | DCStandbyTimeOut_2 |
| Friendly Name | Specify the system sleep timeout (on battery) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\29F6C1DB-86DA-48C5-9FDB-F2B67B1F44DA |
| ADMX File Name | Power.admx |
StandbyTimeoutPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1709 [10.0.16299] and later |
./Device/Vendor/MSFT/Policy/Config/Power/StandbyTimeoutPluggedIn
This policy setting allows you to specify the period of inactivity before Windows transitions the system to sleep.
If you enable this policy setting, you must provide a value, in seconds, indicating how much idle time should elapse before Windows transitions to sleep.
If you disable or don't configure this policy setting, users control this setting.
If the user has configured a slide show to run on the lock screen when the machine is locked, this can prevent the sleep transition from occurring. The "Prevent enabling lock screen slide show" policy setting can be used to disable the slide show feature.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | chr (string) |
| Access Type | Add, Delete, Get, Replace |
Tip
This is an ADMX-backed policy and requires SyncML format for configuration. For an example of SyncML format, refer to Enabling a policy.
ADMX mapping:
| Name | Value |
|---|---|
| Name | ACStandbyTimeOut_2 |
| Friendly Name | Specify the system sleep timeout (plugged in) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\29F6C1DB-86DA-48C5-9FDB-F2B67B1F44DA |
| ADMX File Name | Power.admx |
TurnOffHybridSleepOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/TurnOffHybridSleepOnBattery
This policy setting allows you to turn off Hybrid Sleep.
If you enable this policy setting, a hiberfile isn't generated when the system transitions to sleep (Stand By).
If you disable or don't configure this policy setting, users control this setting.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Default Value | 0 |
Allowed values:
| Value | Description |
|---|---|
| 0 (Default) | . |
| 1 | Hybrid Sleep. |
Group policy mapping:
| Name | Value |
|---|---|
| Name | DCStandbyWithHiberfileEnable_2 |
| Friendly Name | Turn off hybrid sleep (on battery) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\94ac6d29-73ce-41a6-809f-6363ba21b47e |
| Registry Value Name | DCSettingIndex |
| ADMX File Name | Power.admx |
TurnOffHybridSleepPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/TurnOffHybridSleepPluggedIn
This policy setting allows you to turn off Hybrid Sleep.
If you enable this policy setting, a hiberfile isn't generated when the system transitions to sleep (Stand By).
If you disable or don't configure this policy setting, users control this setting.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Default Value | 0 |
Allowed values:
| Value | Description |
|---|---|
| 0 (Default) | . |
| 1 | Hybrid Sleep. |
Group policy mapping:
| Name | Value |
|---|---|
| Name | ACStandbyWithHiberfileEnable_2 |
| Friendly Name | Turn off hybrid sleep (plugged in) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\94ac6d29-73ce-41a6-809f-6363ba21b47e |
| Registry Value Name | ACSettingIndex |
| ADMX File Name | Power.admx |
UnattendedSleepTimeoutOnBattery
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/UnattendedSleepTimeoutOnBattery
This policy setting allows you to specify the period of inactivity before Windows transitions to sleep automatically when a user isn't present at the computer.
If you enable this policy setting, you must provide a value, in seconds, indicating how much idle time should elapse before Windows automatically transitions to sleep when left unattended. If you specify 0 seconds, Windows doesn't automatically transition to sleep.
If you disable or don't configure this policy setting, users control this setting.
If the user has configured a slide show to run on the lock screen when the machine is locked, this can prevent the sleep transition from occurring. The "Prevent enabling lock screen slide show" policy setting can be used to disable the slide show feature.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Allowed Values | Range: [0-4294967295] |
| Default Value | 0 |
Group policy mapping:
| Name | Value |
|---|---|
| Name | UnattendedSleepTimeOutDC |
| Friendly Name | Specify the unattended sleep timeout (on battery) |
| Element Name | Unattended Sleep Timeout (seconds) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\7bc4a2f9-d8fc-4469-b07b-33eb785aaca0 |
| ADMX File Name | Power.admx |
UnattendedSleepTimeoutPluggedIn
| Scope | Editions | Applicable OS |
|---|---|---|
| ✅ Device ❌ User |
✅ Pro ✅ Enterprise ✅ Education ✅ Windows SE ✅ IoT Enterprise / IoT Enterprise LTSC |
✅ Windows 10, version 1903 [10.0.18362] and later |
./Device/Vendor/MSFT/Policy/Config/Power/UnattendedSleepTimeoutPluggedIn
This policy setting allows you to specify the period of inactivity before Windows transitions to sleep automatically when a user isn't present at the computer.
If you enable this policy setting, you must provide a value, in seconds, indicating how much idle time should elapse before Windows automatically transitions to sleep when left unattended. If you specify 0 seconds, Windows doesn't automatically transition to sleep.
If you disable or don't configure this policy setting, users control this setting.
If the user has configured a slide show to run on the lock screen when the machine is locked, this can prevent the sleep transition from occurring. The "Prevent enabling lock screen slide show" policy setting can be used to disable the slide show feature.
Description framework properties:
| Property name | Property value |
|---|---|
| Format | int |
| Access Type | Add, Delete, Get, Replace |
| Allowed Values | Range: [0-4294967295] |
| Default Value | 0 |
Group policy mapping:
| Name | Value |
|---|---|
| Name | UnattendedSleepTimeOutAC |
| Friendly Name | Specify the unattended sleep timeout (plugged in) |
| Element Name | Unattended Sleep Timeout (seconds) |
| Location | Computer Configuration |
| Path | System > Power Management > Sleep Settings |
| Registry Key Name | Software\Policies\Microsoft\Power\PowerSettings\7bc4a2f9-d8fc-4469-b07b-33eb785aaca0 |
| ADMX File Name | Power.admx |
Related articles
Opinia
Dostępne już wkrótce: W 2024 r. będziemy stopniowo wycofywać zgłoszenia z serwisu GitHub jako mechanizm przesyłania opinii na temat zawartości i zastępować go nowym systemem opinii. Aby uzyskać więcej informacji, sprawdź: https://aka.ms/ContentUserFeedback.
Prześlij i wyświetl opinię dla