Best Practices for running Linux on Hyper-V
Applies to: Windows Server 2022, Azure Stack HCI, version 20H2; Windows Server 2019, Windows Server 2016, Hyper-V Server 2016, Windows Server 2012 R2, Hyper-V Server 2012 R2, Windows Server 2012, Hyper-V Server 2012, Windows Server 2008 R2, Windows 10, Windows 8.1, Windows 8, Windows 7.1, Windows 7
This topic contains a list of recommendations for running Linux virtual machine on Hyper-V.
Tuning Linux File Systems on Dynamic VHDX Files
Some Linux file systems may consume significant amounts of real disk space even when the file system is mostly empty. To reduce the amount of real disk space usage of dynamic VHDX files, consider the following recommendations:
- When creating the VHDX, use 1MB BlockSizeBytes (from the default 32MB) in PowerShell, for example:
PS > New-VHD -Path C:\MyVHDs\test.vhdx -SizeBytes 127GB -Dynamic -BlockSizeBytes 1MB
The ext4 format is preferred to ext3 because ext4 is more space efficient than ext3 when used with dynamic VHDX files.
When creating the filesystem specify the number of groups to be 4096, for example:
# mkfs.ext4 -G 4096 /dev/sdX1
Grub Menu Timeout on Generation 2 Virtual Machines
Because of legacy hardware being removed from emulation in Generation 2 virtual machines, the grub menu countdown timer counts down too quickly for the grub menu to be displayed, immediately loading the default entry. Until grub is fixed to use the EFI-supported timer, modify /boot/grub/grub.conf, /etc/default/grub, or equivalent to have "timeout=100000" instead of the default "timeout=5".
PxE Boot on Generation 2 Virtual Machines
Because the PIT timer is not present in Generation 2 Virtual Machines, network connections to the PxE TFTP server can be prematurely terminated and prevent the bootloader from reading Grub configuration and loading a kernel from the server.
On RHEL 6.x, the legacy grub v0.97 EFI bootloader can be used instead of grub2 as described here: https://access.redhat.com/documentation/Red_Hat_Enterprise_Linux/6/html/Installation_Guide/s1-netboot-pxe-config-efi.html
On Linux distributions other than RHEL 6.x, similar steps can be followed to configure grub v0.97 to load Linux kernels from a PxE server.
Additionally, on RHEL/CentOS 6.6 keyboard and mouse input will not work with the pre-install kernel which prevents specifying installation options in the menu. A serial console must be configured to allow choosing installation options.
In the efidefault file on the PxE server, add the following kernel parameter "console=ttyS1"
On the VM in Hyper-V, set up a COM port using this PowerShell cmdlet:
Set-VMComPort -VMName <Name> -Number 2 -Path \\.\pipe\dbg1
Specifying a kickstart file to the pre-install kernel would also avoid the need for keyboard and mouse input during installation.
Use static MAC addresses with failover clustering
Linux virtual machines that will be deployed using failover clustering should be configured with a static media access control (MAC) address for each virtual network adapter. In some versions of Linux, the networking configuration may be lost after failover because a new MAC address is assigned to the virtual network adapter. To avoid losing the network configuration, ensure that each virtual network adapter has a static MAC address. You can configure the MAC address by editing the settings of the virtual machine in Hyper-V Manager or Failover Cluster Manager.
Use Hyper-V-specific network adapters, not the legacy network adapter
Configure and use the virtual Ethernet adapter, which is a Hyper-V-specific network card with enhanced performance. If both legacy and Hyper-V-specific network adapters are attached to a virtual machine, the network names in the output of ifconfig -a might show random values such as _tmp12000801310. To avoid this issue, remove all legacy network adapters when using Hyper-V-specific network adapters in a Linux virtual machine.
Use I/O scheduler noop/none for better disk I/O performance
The Linux kernel offers two sets of disk I/O schedulers to reorder requests. One set is for the older ‘blk’ subsystem and one set is for the newer ‘blk-mq’ subsystem. In either case, with today’s solid state disks it is recommended to use a scheduler that passes the scheduling decisions to the underlying Hyper-V hypervisor. For Linux kernels using the ‘blk’ subsystem, this is the “noop” scheduler. For Linux kernels using the ‘blk-mq’ subsystem, this is the “none” scheduler.
For a particular disk, the available schedulers can be seen at this file system location: /sys/class/block/
<diskname>/queue/scheduler, with the currently selected scheduler in square brackets. You can change the scheduler by writing to this file system location. The change must be added to an initialization script in order to persist across reboots. Consult your Linux distro documentation for details.
Linux kernel versions earlier than 2.6.37 don't support NUMA on Hyper-V with larger VM sizes. This issue primarily impacts older distributions using the upstream Red Hat 2.6.32 kernel, and was fixed in Red Hat Enterprise Linux (RHEL) 6.6 (kernel-2.6.32-504). Systems running custom kernels older than 2.6.37, or RHEL-based kernels older than 2.6.32-504 must set the boot parameter
numa=off on the kernel command line in grub.conf. For more information, see Red Hat KB 436883.
Reserve more memory for kdump
In case the dump capture kernel ends up with a panic on boot, reserve more memory for the kernel. For example, change the parameter crashkernel=384M-:128M to crashkernel=384M-:256M in the Ubuntu grub configuration file.
Shrinking VHDX or expanding VHD and VHDX files can result in erroneous GPT partition tables
Hyper-V allows shrinking virtual disk (VHDX) files without regard for any partition, volume, or file system data structures that may exist on the disk. If the VHDX is shrunk to where the end of the VHDX comes before the end of a partition, data can be lost, that partition can become corrupted, or invalid data can be returned when the partition is read.
After resizing a VHD or VHDX, administrators should use a utility like fdisk or parted to update the partition, volume, and file system structures to reflect the change in the size of the disk. Shrinking or expanding the size of a VHD or VHDX that has a GUID Partition Table (GPT) will cause a warning when a partition management tool is used to check the partition layout, and the administrator will be warned to fix the first and secondary GPT headers. This manual step is safe to perform without data loss.
Prosledite i prikažite povratne informacije za