แก้ไข

แชร์ผ่าน


Data gateways are missing in Power Automate

If you can't see one or more of your on-premises data gateways in the Power Automate portal, follow the recommendations in this article to isolate and resolve the issue.

Applies to:   Power Automate
Original KB number:   4555609

Symptoms

You can't see one or more of your data gateways on the Gateways page in the Power Automate portal.

Cause

If the region where you installed the on-premises data gateway doesn't match the region where your Power Automate or Power Apps environment is located, you won't be able to view or use that gateway in that environment.

Verify the issue

To verify the issue, first check the region of the environment you're using and ensure you've selected the desired environment in Power Automate. Then, check the region of your on-premises data gateway.

Step 1: Verify the region of your Power Apps environment

  1. Sign in to the Power Platform admin center as an administrator.

  2. Verify the region of the environment you're using.

    Screenshot that shows how to check the region of the Power Platform environment.

  3. Sign in to Power Automate and ensure you've selected the desired environment.

    Screenshot that shows how to check the environment used in the flow.

  4. Select Gateways in the left navigation pane.

    If Gateways isn't visible in the left navigation pane, select More > Discover all, find Gateways under Data, and then pin it to the navigation pane.

  5. If you don't see your gateway, go to step 2 to verify the gateway's region.

Step 2: Verify the region of your gateway

  1. On the computer hosting the gateway, go to the Start menu, search for On-premises data gateway, and launch the app:

    Screenshot that shows how to search for the On-premises data gateway app from the Start menu.

  2. On the app's Status page, select Sign in and sign in with the credentials you used when creating the gateway. If you can't remember the credentials, go to the Resolution section.

    Screenshot that shows the Sign in option on the app's Status page.

  3. After signing in, you can see the region of your gateway on the Status page.

    Screenshot that shows the gateway's region on the Status page.

    Note

    The region where your gateway is installed must map to your Power Automate region. To check the mapping of the gateway region to the Power Platform region, see Regions overview for Power Automate.

  4. If the region doesn't match your environment, follow the steps in the Resolution section to resolve the issue. If the region matches your environment, or if the following steps don't resolve the issue, contact Microsoft Power Automate support for further assistance.

Resolution

It's not possible to change the region of a gateway that's already installed. However, you can follow the steps below to reinstall the gateway in a region that matches your Power Automate environment region.

  1. Go to Add or Remove Programs and select On-premises Data Gateway.

  2. Select Uninstall and follow the wizard to uninstall the gateway.

  3. Download and run the latest version of the On-Premises Data Gateway installer. Before installing, see Install an on-premises data gateway for minimum requirements and considerations.

  4. Follow the installation wizard until you reach the step to name the gateway. For detailed installation steps, see Install an on-premises data gateway.

  5. Select the Change Region link.

    Screenshot that shows how to change the gateway region on the Gateway naming page.

  6. Select the region matching your Power Apps environment and select Done.

    Note

    The region where your gateway is installed must map to your Power Automate region. To check the mapping of the gateway region to the Power Platform region, see Regions overview for Power Automate.

  7. Follow the gateway installation wizard until it's complete.

  8. Sign in to Power Automate, and select Gateways in the left navigation pane.

    If Gateways isn't visible in the navigation pane, select More > Discover all, find Gateways under Data, and then pin it to the navigation pane.

  9. Check if the gateway appears in the list of gateways. If the gateway is still missing, contact Microsoft Power Automate support for assistance.

More information