Set up network mapping and IP addressing for VNets

This article describes how to map two instances of Azure virtual networks (VNets) located in different Azure regions, and how to set up IP addressing between networks. Network mapping provides a default behavior for target network selection based on source network at the time of enabling replication.

Prerequisites

Before you map networks, you should have Azure VNets in the source and target Azure regions.

Set up network mapping manually (Optional)

Note

Replication can now be done between any two Azure regions around the world. Customers are no longer limited to enabling replication within their continent.

Map networks as follows:

  1. In Site Recovery Infrastructure, click +Network Mapping.

    Screenshot of Create a network mapping.

  2. In Add network mapping, select the source and target locations. In our example, the source virtual machine is running in the East Asia region, and replicates to the Southeast Asia region.

    Screenshot of Select source and target.

  3. Now create a network mapping in the opposite direction. In our example, the source is now Southeast Asia, and the target is East Asia.

    Screenshot of Add network mapping pane - Select source and target locations for the target network.

Map networks when you enable replication

If you haven't prepared network mapping before you configure disaster recovery for Azure virtual machines, you can specify a target network when you set up and enable replication. When you do this, the following happens:

  • Based on the target you select, Site Recovery automatically creates network mappings from the source to target region, and from the target to source region.
  • By default, Site Recovery creates a network in the target region that's identical to the source network. Site Recovery adds -asr as a suffix to the name of the target network. You can customize the target network. For example, if the source network name was contoso-vnet, then the target network is named contoso-vnet-asr.

So, if the source network name was "contoso-vnet", then the target network name is contoso-vnet-asr. Source network's name won't be edited by Azure Site Recovery.

  • If network mapping has already occurred for a source network, the mapped target network is always the default at the time of enabling replications for more virtual machines. You can choose to change the target virtual network by choosing other available options from the dropdown.
  • To change the default target virtual network for new replications, you need to modify the existing network mapping.
  • If you wish to modify a network mapping from region A to region B, ensure that you first delete the network mapping from region B to region A. After reverse mapping deletion, modify the network mapping from region A to region B and then create the relevant reverse mapping.

Note

  • Modifying the network mapping only changes the defaults for new virtual machine replications. It does not impact the target virtual network selections for existing replications.
  • If you wish to modify the target network for an existing replication, go to Network Settings of the replicated item.

Specify a subnet

The subnet of the target virtual machine is selected based on the name of the subnet of the source virtual machine.

  • If a subnet with the same name as the source virtual machine subnet is available in the target network, that subnet is set for the target virtual machine.

  • If a subnet with the same name doesn't exist in the target network, the first subnet in the alphabetical order is set as the target subnet.

  • You can modify the target subnet in the Network settings for the virtual machine.

    Screenshot of Network compute properties window.

Set up IP addressing for target virtual machines

The IP address for each NIC on a target virtual machine is configured as follows:

  • DHCP: If the NIC of the source virtual machine uses DHCP, the NIC of the target virtual machine is also set to use DHCP.
  • Static IP address: If the NIC of the source virtual machine uses static IP addressing, the target virtual machine NIC also uses a static IP address.

The same holds for the Secondary IP Configurations as well.

IP address assignment during failover

Note

The following approach is used to assign IP address to the target virtual machine, irrespective of the NIC settings.

Source and target subnets Details
Same address space IP address of the source virtual machine NIC is set as the target virtual machine NIC IP address.

If the address isn't available, the next available IP address is set as the target.
Different address space The next available IP address in the target subnet is set as the target virtual machine NIC address.

IP address assignment during test failover

Target network Details
Target network is the failover VNet - Target IP address is static with the same IP address.

- If the same IP address is already assigned, then the IP address is the next one available at the end of the subnet range. For example: If the source IP address is 10.0.0.19 and failover network uses range 10.0.0.0/24, then the next IP address assigned to the target virtual machine is 10.0.0.254.
Target network isn't the failover VNet - Target IP address is static with the same IP address, only if it's available in the target virtual network.

- If the same IP address is already assigned, then the IP address is the next one available at the end of the subnet range.

For example: If the source static IP address is 10.0.0.19 and failover is on a network that isn't the failover network, with the range 10.0.0.0/24, then the target static IP address is 10.0.0.19 if available. Otherwise it is 10.0.0.254.
  • The failover VNet is the target network that you select when you set up disaster recovery.
  • We recommend that you always use a nonproduction network for test failover.
  • You can modify the target IP address in the Network settings of the virtual machine.

Next steps