Set-CMTSStepEnableBitLocker
設定 啟用 BitLocker 工作順序步驟的實例。
Syntax
Set-CMTSStepEnableBitLocker
[-CreateKeyOption <CreateKeyType>]
[-Drive <String>]
[-EnableSkipWhenNoValidTpm <Boolean>]
[-EncryptionMethod <DiskEncryptionMethod>]
[-IsEncryptFullDisk <Boolean>]
[-IsWaitingForBitLockerComplete <Boolean>]
[-Pin <SecureString>]
[-TpmAndPin]
[-TpmAndUsb]
[-TpmOnly]
[-UsbOnly]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
-InputObject <IResultObject>
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-CreateKeyOption <CreateKeyType>]
[-Drive <String>]
[-EnableSkipWhenNoValidTpm <Boolean>]
[-EncryptionMethod <DiskEncryptionMethod>]
[-IsEncryptFullDisk <Boolean>]
[-IsWaitingForBitLockerComplete <Boolean>]
[-Pin <SecureString>]
[-TpmAndPin]
[-TpmAndUsb]
[-TpmOnly]
[-UsbOnly]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-CreateKeyOption <CreateKeyType>]
[-Drive <String>]
[-EnableSkipWhenNoValidTpm <Boolean>]
[-EncryptionMethod <DiskEncryptionMethod>]
[-IsEncryptFullDisk <Boolean>]
[-IsWaitingForBitLockerComplete <Boolean>]
[-Pin <SecureString>]
[-TpmAndPin]
[-TpmAndUsb]
[-TpmOnly]
[-UsbOnly]
[-AddCondition <IResultObject[]>]
[-ClearCondition]
[-Description <String>]
[-IsContinueOnError <Boolean>]
[-IsEnabled <Boolean>]
[-MoveToIndex <Int32>]
[-NewStepName <String>]
[-RemoveConditionFile]
[-RemoveConditionFolder]
[-RemoveConditionIfStatement]
[-RemoveConditionOperatingSystem]
[-RemoveConditionQueryWmi]
[-RemoveConditionRegistry]
[-RemoveConditionSoftware]
[-RemoveConditionVariable]
[-StepName <String>]
[-StepOrder <ReorderType>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-Condition <IResultObject[]>]
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-Condition <IResultObject[]>]
-InputObject <IResultObject>
[-SetConditionIfStatement]
[-StatementType <ConditionStatementType>]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-ConditionVariableName <String>]
[-ConditionVariableValue <String>]
-InputObject <IResultObject>
[-OperatorType <VariableOperatorType>]
[-SetConditionVariable]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
-TaskSequenceId <String>
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
[-SetConditionFile]
[-StepName <String>]
-TaskSequenceName <String>
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-FileDateTimeOperator <VariableOperatorType>]
[-FilePath <String>]
[-FileTimestamp <DateTime>]
[-FileVersion <String>]
-InputObject <IResultObject>
[-SetConditionFile]
[-StepName <String>]
[-VersionOperator <VariableOperatorType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
[-SetConditionFolder]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-FolderDateTimeOperator <VariableOperatorType>]
[-FolderPath <String>]
[-FolderTimestamp <DateTime>]
-InputObject <IResultObject>
[-SetConditionFolder]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
-InputObject <IResultObject>
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
-InputObject <IResultObject>
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
-InputObject <IResultObject>
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
-InputObject <IResultObject>
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-IsAnyVersion <Boolean>]
[-MsiFilePath <String>]
[-SetConditionSoftware]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-Namespace <String[]>]
[-Query <String>]
[-SetConditionQueryWmi]
[-StepName <String>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
-TaskSequenceId <String>
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-RegistryKey <String>]
[-RegistryOperator <VariableOperatorType>]
[-RegistryValueData <String>]
[-RegistryValueName <String>]
[-RootKey <RegistryRootKeyType>]
[-SetConditionRegistry]
[-StepName <String>]
-TaskSequenceName <String>
[-ValueType <RegistryValueType>]
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
-TaskSequenceId <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-CMTSStepEnableBitLocker
[-SetConditionOperatingSystem]
[-StepName <String>]
[-SupportedPlatform <IResultObject[]>]
-TaskSequenceName <String>
[-DisableWildcardHandling]
[-ForceWildcardHandling]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
使用此 Cmdlet 來設定 啟用 BitLocker 工作順序步驟的實例。
如需此步驟的詳細資訊，請 參閱關於工作順序步驟：啟用 BitLocker。
注意事項
從Configuration Manager月臺磁片磁碟機執行 Configuration Manager Cmdlet，例如 PS XYZ:\> 。 如需詳細資訊，請 參閱開始使用。
範例
範例 1
此範例會變更預設 OS 部署工作順序中的[啟用 BitLocker] 步驟，以要求 USB 上的啟動金鑰、使用完整磁片加密，並等候 BitLocker 完成。
$tsNameOsd = "Default OS deployment"
$tsStepNameEnableBitLocker = "Enable BitLocker"
Set-CMTSStepEnableBitLocker -TaskSequenceName $tsNameOsd -StepName $tsStepNameEnableBitLocker -UsbOnly -EncryptionMethod AES_256 -EncryptFullDisk $true -WaitForBitLockerComplete $true參數
-AddCondition
指定要加入此步驟的條件物件。 若要取得這個物件，請使用其中一個工作順序條件 Cmdlet。 例如， Get-CMTSStepConditionVariable。
| Type: | IResultObject[] |
| Aliases: | AddConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ClearCondition
從這個步驟中移除條件。 使用 -Condition 參數來指定要移除的條件。
| Type: | SwitchParameter |
| Aliases: | ClearConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Condition
指定要與這個步驟搭配使用的條件物件。 若要取得這個物件，請使用其中一個工作順序條件 Cmdlet。 例如， Get-CMTSStepConditionVariable。
| Type: | IResultObject[] |
| Aliases: | SubCondition, SubConditions |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConditionVariableName
指定要做為條件的工作順序變數名稱。
| Type: | String |
| Aliases: | Variable |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ConditionVariableValue
指定要在條件中使用之工作順序變數的值。
| Type: | String |
| Aliases: | Value |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
執行 Cmdlet 之前提示您確認。
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CreateKeyOption
使用下列其中一個值來指定要在何處建立修復金鑰：
ActiveDirectoryDomainServices：建立修復密碼並在 Active Directory 中委付， (建議的)DoNotCreateRecoveryKey：加密磁片磁碟機，但不要建立修復密碼。
| Type: | CreateKeyType |
| Accepted values: | ActiveDirectoryDomainServices, DoNotCreateRecoveryKey |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Description
指定此工作順序步驟的選擇性描述。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisableWildcardHandling
此參數會將萬用字元視為常值字元值。 您無法將其與 ForceWildcardHandling結合。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Drive
指定要加密的磁片磁碟機。
| Type: | String |
| Aliases: | SpecificDrive |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EnableSkipWhenNoValidTpm
適用于 2006 版和更新版本。 將此參數 true 設定為 ，以針對沒有 TPM 或未啟用 TPM 的電腦略過此步驟。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-EncryptionMethod
適用于 2006 版和更新版本。 使用此參數來指定磁片加密模式。 根據預設或未指定，此步驟會繼續使用 OS 版本的預設加密方法。
| Type: | DiskEncryptionMethod |
| Aliases: | DiskEncryptionMethod |
| Accepted values: | DoNotSpecify, AES_128, AES_256, XTS_AES128, XTS_AES256, TotalCount |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileDateTimeOperator
指定檔案日期/時間條件的變數運算子類型。
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FilePath
指定檔案條件的路徑。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileTimestamp
指定要用於檔案條件的日期/時間值。
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FileVersion
指定檔案條件的版本字串。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderDateTimeOperator
指定資料夾日期/時間條件的變數運算子。
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderPath
指定資料夾條件的路徑。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-FolderTimestamp
指定要用於資料夾條件的日期/時間值。
| Type: | DateTime |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ForceWildcardHandling
此參數會處理萬用字元，並可能導致非預期的行為 (不建議) 。 您無法將其與 DisableWildcardHandling結合。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-InputObject
指定要從中取得 啟用 BitLocker 步驟的工作順序物件。 若要取得此物件，請使用 Get-CMTaskSequence Cmdlet。
| Type: | IResultObject |
| Aliases: | TaskSequence |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
-IsAnyVersion
使用此參數搭配 SetConditionSoftware 參數，以符合產品的任何版本。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IsContinueOnError
使用此參數來啟用步驟選項 [ 發生錯誤時繼續]。 當您啟用此選項時，如果步驟失敗，工作順序會繼續。
| Type: | Boolean |
| Aliases: | IsThisStepContinueOnError |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IsEnabled
使用此參數來啟用此工作順序步驟。
| Type: | Boolean |
| Aliases: | IsThisStepEnabled |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IsEncryptFullDisk
將此參數設定為 $true ，以使用完整磁片加密。 根據預設， [啟用 BitLocker] 步驟只會加密磁片磁碟機上的已使用空間。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-IsWaitingForBitLockerComplete
將此參數設定為 $true ，以設定步驟，以等候 BitLocker 完成所有磁片磁碟機上的磁片磁碟機加密程式，然後再繼續執行工作順序。
| Type: | Boolean |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MoveToIndex
將此步驟移至工作順序中指定的索引位置。
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-MsiFilePath
指定軟體條件的 Windows Installer 檔案路徑。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Namespace
指定 WMI 查詢準則的命名空間。
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NewStepName
使用此參數來重新命名此工作順序步驟。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-OperatorType
指定要搭配工作順序變數條件使用的運算子。
| Type: | VariableOperatorType |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual, Like, NotLike |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Pin
如果您使用 TpmAndPin參數，請使用此參數來指定 PIN 值。 將 4-20 個整數指定為安全字串。
| Type: | SecureString |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Query
指定要用於條件的 WMI 查詢字串。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryKey
指定要與登錄條件搭配使用的金鑰。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryOperator
指定要搭配登錄條件使用的運算子。
| Type: | VariableOperatorType |
| Accepted values: | Exists, NotExists, Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryValueData
指定要與登錄條件搭配使用的值資料。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RegistryValueName
指定要與登錄條件搭配使用的值名稱。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionFile
使用此參數來移除檔案條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionFolder
使用此參數來移除資料夾條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionIfStatement
使用此參數來移除語 if 句條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionOperatingSystem
使用此參數來移除 OS 條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionQueryWmi
使用此參數來移除 WMI 查詢準則。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionRegistry
使用此參數來移除登錄條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionSoftware
使用此參數來移除軟體條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoveConditionVariable
使用此參數來移除工作順序變數條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RootKey
指定要搭配登錄條件使用的根金鑰。
| Type: | RegistryRootKeyType |
| Accepted values: | HKeyCurrentUser, HKeyLocalMachine, HKeyUsers, HKeyCurrentConfig |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionFile
新增檔案條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionFolder
新增資料夾條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionIfStatement
新增語 if 句條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionOperatingSystem
新增作業系統條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionQueryWmi
新增 WMI 查詢準則。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionRegistry
新增登錄條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionSoftware
新增軟體條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SetConditionVariable
新增工作順序變數條件。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StatementType
設定語句條件的 if 類型。
| Type: | ConditionStatementType |
| Aliases: | Operator |
| Accepted values: | All, Any, None |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StepName
指定要選取變更的步驟名稱。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-StepOrder
使用此參數來重新排序工作順序中的步驟。
| Type: | ReorderType |
| Accepted values: | MoveUp, MoveDown, MoveToIndex |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-SupportedPlatform
使用此參數來指定 OS 條件的平臺。
| Type: | IResultObject[] |
| Aliases: | SupportedPlatforms |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TaskSequenceId
指定要從中取得啟用 BitLocker步驟之工作順序的套件標識符。 此值是標準套件識別碼，例如 XYZ00858 。
| Type: | String |
| Aliases: | Id, TaskSequencePackageId |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TaskSequenceName
指定要以變更為目標的工作順序名稱。
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TpmAndPin
新增此參數以設定 OS 磁片磁碟機的金鑰管理，以使用 TPM 和個人識別碼 (PIN) 。 當您指定此選項時，BitLocker 會鎖定一般開機程式，直到使用者提供 PIN 為止。 如果您使用此參數，請使用 Pin 來指定 PIN 值。 您無法將此參數與 TpmAndUsb、 TpmOnly或 UsbOnly結合。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TpmAndUsb
新增此參數，以設定 OS 磁片磁碟機的金鑰管理，以使用 TPM 和儲存在 USB 快閃磁片磁碟機上的啟動金鑰。 當您選取此選項時，BitLocker 會鎖定一般開機程式，直到包含 BitLocker 啟動金鑰的 USB 裝置連結至電腦為止。 您無法將此參數與 TpmAndPin、 TpmOnly或 UsbOnly結合。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TpmOnly
新增此參數，以將 OS 磁片磁碟機的金鑰管理設定為只使用 TPM。 您無法將此參數與 TpmAndPin、 TpmAndUsb或 UsbOnly結合。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-UsbOnly
新增此參數，將 OS 磁片磁碟機的金鑰管理設定為只使用儲存在 USB 快閃磁片磁碟機上的啟動金鑰。 當您選取此選項時，BitLocker 會鎖定一般開機程式，直到包含 BitLocker 啟動金鑰的 USB 裝置連結至電腦為止。 您無法將此參數與 TpmAndPin、 TpmAndUsb或 TpmOnly結合。
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ValueType
指定登錄條件的數值型別。
| Type: | RegistryValueType |
| Accepted values: | RegistrySZ, RegistryExpandSZ, RegistryDWord |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VersionOperator
指定要與檔案條件搭配使用的運算子。
| Type: | VariableOperatorType |
| Accepted values: | Equals, NotEquals, Greater, GreaterEqual, Less, LessEqual |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
顯示執行 Cmdlet 時會發生什麼情況。 它不會執行 Cmdlet。
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
輸入
Microsoft.ConfigurationManagement.ManagementProvider.IResultObject
輸出
System.Object
相關連結
意見反應
即將登場：在 2024 年，我們將逐步淘汰 GitHub 問題作為內容的意見反應機制，並將它取代為新的意見反應系統。 如需詳細資訊，請參閱：https://aka.ms/ContentUserFeedback。
提交並檢視相關的意見反應