Ports used in Configuration Manager
Applies to: Configuration Manager (current branch)
This article lists the network ports that Configuration Manager uses. Some connections use ports that aren't configurable, and some support custom ports that you specify. If you use any port filtering technology, verify that the required ports are available. These port filtering technologies include firewalls, routers, proxy servers, or IPsec.
Note
If you support internet-based clients by using SSL bridging, in addition to port requirements, you might also have to allow some HTTP verbs and headers to traverse your firewall.
Ports you can configure
Configuration Manager enables you to configure the ports for the following types of communication:
Enrollment proxy point to enrollment point
Client-to-site systems that run IIS
Client to internet (as proxy server settings)
Software update point to internet (as proxy server settings)
Software update point to WSUS server
Site server to site database server
Site server to WSUS database server
Reporting services points
Note
You configure the ports for the reporting services point in SQL Server Reporting Services. Configuration Manager then uses these ports during communications to the reporting services point. Be sure to review these ports that define the IP filter information for IPsec policies or for configuring firewalls.
By default, the HTTP port that's used for client-to-site system communication is port 80, and 443 for HTTPS. You can change these ports during setup or in the site properties.
Non-configurable ports
Configuration Manager doesn't allow you to configure ports for the following types of communication:
Site to site
Site server to site system
Configuration Manager console to SMS Provider
Configuration Manager console to the internet
Connections to cloud services, such as Microsoft Azure
Ports used by clients and site systems
The following sections detail the ports that are used for communication in Configuration Manager. The arrows in the section title show the direction of the communication:
-->
Indicates that one computer starts communication and the other computer always responds<-->
Indicates that either computer can start communication
Asset Intelligence synchronization point -->
Microsoft
Description | UDP | TCP |
---|---|---|
HTTPS | -- | 443 |
Asset Intelligence synchronization point -->
SQL Server
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 2 Alternate port available |
Client -->
Client
Wake-up proxy also uses ICMP echo request messages from one client to another client. Clients use this communication to confirm whether the other client is awake on the network. ICMP is sometimes referred to as ping commands. ICMP doesn't have a UDP or TCP protocol number, and so it isn't listed in the below table. However, any host-based firewalls on these client computers or intervening network devices within the subnet must permit ICMP traffic for wake-up proxy communication to succeed.
Description | UDP | TCP |
---|---|---|
Wake On LAN | 9 Note 2 Alternate port available | -- |
Wake-up proxy | 25536 Note 2 Alternate port available | -- |
Windows PE Peer cache broadcast | 8004 | -- |
Windows PE Peer cache download | -- | 8003 |
For more information, see Windows PE Peer Cache.
Client -->
Configuration Manager Network Device Enrollment Service (NDES) policy module
Description | UDP | TCP |
---|---|---|
HTTP | 80 | |
HTTPS | -- | 443 |
Client -->
Cloud distribution point
Description | UDP | TCP |
---|---|---|
HTTPS | -- | 443 |
For more information, see Ports and data flow.
Client -->
Cloud management gateway (CMG)
Description | UDP | TCP |
---|---|---|
HTTPS | -- | 443 |
For more information, see CMG data flow.
Client -->
Distribution point, both standard and pull
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 Note 2 Alternate port available |
HTTPS | -- | 443 Note 2 Alternate port available |
Express updates | -- | 8005 Note 2 Alternate port available |
Note
Use client settings to configure the alternate port for express updates. For more information, see Port that clients use to receive requests for delta content.
Client -->
Distribution point configured for multicast, both standard and pull
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
Multicast protocol | 63000-64000 | -- |
Client -->
Distribution point configured for PXE, both standard and pull
Description | UDP | TCP |
---|---|---|
DHCP | 67 and 68 | -- |
TFTP | 69 Note 4 | -- |
Boot Information Negotiation Layer (BINL) | 4011 | -- |
DHCPv6 for PXE responder without WDS | 547 | -- |
Important
If you enable a host-based firewall, make sure that the rules allow the server to send and receive on these ports. When you enable a distribution point for PXE, Configuration Manager can enable the inbound (receive) rules on the Windows Firewall. It doesn't configure the outbound (send) rules.
Client -->
Fallback status point
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 Note 2 Alternate port available |
Client -->
Global catalog domain controller
A Configuration Manager client doesn't contact a global catalog server when it's a workgroup computer or when it's configured for internet-only communication.
Description | UDP | TCP |
---|---|---|
Global catalog LDAP | -- | 3268 |
Client -->
Management point
Description | UDP | TCP |
---|---|---|
Client notification (default communication before falling back to HTTP or HTTPS) | -- | 10123 Note 2 Alternate port available |
HTTP | -- | 80 Note 2 Alternate port available |
HTTPS | -- | 443 Note 2 Alternate port available |
Client -->
Software update point
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 or 8530 Note 3 |
HTTPS | -- | 443 or 8531 Note 3 |
Client -->
State migration point
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 Note 2 Alternate port available |
HTTPS | -- | 443 Note 2 Alternate port available |
Server Message Block (SMB) | -- | 445 |
CMG connection point -->
CMG virtual machine scale set
Configuration Manager uses these connections to build the CMG channel. For more information, see CMG data flow.
Description | UDP | TCP |
---|---|---|
HTTPS (one VM) | -- | 443 |
HTTPS (two or more VMs) | -- | 10124-10139 |
CMG connection point -->
CMG classic cloud service
Configuration Manager uses these connections to build the CMG channel. For more information, see CMG data flow.
Description | UDP | TCP |
---|---|---|
TCP-TLS (preferred) | -- | 10140-10155 |
HTTPS (fallback with one VM) | -- | 443 |
HTTPS (fallback with two or more VMs) | -- | 10124-10139 |
CMG connection point -->
Management point
Description | UDP | TCP |
---|---|---|
HTTPS | -- | 443 |
HTTP | -- | 80 |
The specific port required depends upon the management point configuration. For more information, see CMG data flow.
CMG connection point -->
Software update point
The specific port depends upon the software update point configuration.
Description | UDP | TCP |
---|---|---|
HTTPS | -- | 443/8531 |
HTTP | -- | 80/8530 |
For more information, see CMG data flow.
Configuration Manager console -->
Client
Description | UDP | TCP |
---|---|---|
Remote Control (control) | -- | 2701 |
Remote Assistance (RDP and RTC) | -- | 3389 |
Configuration Manager console -->
internet
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 |
HTTPS | -- | 443 |
The Configuration Manager console uses internet access for the following actions:
- Downloading software updates from Microsoft Update for deployment packages.
- The Feedback item in the ribbon.
- Links to documentation within the console.
- Downloading items from Community hub
Configuration Manager console -->
Reporting services point
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 Note 2 Alternate port available |
HTTPS | -- | 443 Note 2 Alternate port available |
Configuration Manager console -->
Site server
Description | UDP | TCP |
---|---|---|
RPC (initial connection to WMI to locate provider system) | -- | 135 |
Configuration Manager console -->
SMS Provider
Description | UDP | TCP |
---|---|---|
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
HTTPS | -- | 443 *Note |
Note for administration service
Any device that makes a call to the administration service on the SMS Provider uses HTTPS port 443. For more information, see What is the administration service?
Configuration Manager Network Device Enrollment Service (NDES) policy module -->
Certificate registration point
Description | UDP | TCP |
---|---|---|
HTTPS | -- | 443 Note 2 Alternate port available |
Data warehouse service point -->
SQL Server
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 2 Alternate port available |
Distribution point, both standard and pull -->
Management point
A distribution point communicates to the management point in the following scenarios:
To report the status of prestaged content
To report usage summary data
To report content validation
To report the status of package downloads, only for pull-distribution points
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 Note 2 Alternate port available |
HTTPS | -- | 443 Note 2 Alternate port available |
Endpoint Protection point -->
internet
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 |
Endpoint Protection point -->
SQL Server
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 2 Alternate port available |
Enrollment proxy point -->
Enrollment point
Description | UDP | TCP |
---|---|---|
HTTPS | -- | 443 Note 2 Alternate port available |
Enrollment point -->
SQL Server
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 2 Alternate port available |
Exchange Server Connector -->
Exchange Online
Description | UDP | TCP |
---|---|---|
Windows Remote Management over HTTPS | -- | 5986 |
Exchange Server Connector -->
On-premises Exchange Server
Description | UDP | TCP |
---|---|---|
Windows Remote Management over HTTP | -- | 5985 |
Mac computer -->
Enrollment proxy point
Description | UDP | TCP |
---|---|---|
HTTPS | -- | 443 |
Management point -->
Domain controller
Description | UDP | TCP |
---|---|---|
Lightweight Directory Access Protocol (LDAP) | 389 | 389 |
Secure LDAP (LDAPS, for signing and binding) | 636 | 636 |
Global catalog LDAP | -- | 3268 |
RPC Endpoint Mapper | -- | 135 |
RPC | -- | DYNAMIC Note 6 |
Management point <-->
Site server
Description | UDP | TCP |
---|---|---|
RPC Endpoint mapper | -- | 135 |
RPC | -- | DYNAMIC Note 6 |
Server Message Block (SMB) | -- | 445 |
Management point -->
SQL Server
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 2 Alternate port available |
Mobile device -->
Enrollment proxy point
Description | UDP | TCP |
---|---|---|
HTTPS | -- | 443 |
Pull-Distribution point -->
Distribution point configured as source
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 Note 2 Alternate port available |
HTTPS | -- | 443 Note 2 Alternate port available |
Express updates | -- | 8005 Note 2 Alternate port available |
Reporting Services point -->
SQL Server
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 2 Alternate port available |
Service connection point -->
Azure (CMG)
Description | UDP | TCP |
---|---|---|
HTTPS for CMG service deployment | -- | 443 |
For more information, see CMG data flow.
Service connection point -->
Azure Logic App
Description | UDP | TCP |
---|---|---|
HTTPS for external notification | -- | 443 |
For more information, see External notifications.
Service connection point -->
SQL Server
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 2 Alternate port available |
Site server <-->
Asset Intelligence synchronization point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server -->
Client
Description | UDP | TCP |
---|---|---|
Wake On LAN | 9 Note 2 Alternate port available | -- |
Site server -->
Cloud distribution point
Description | UDP | TCP |
---|---|---|
HTTPS | -- | 443 |
For more information, see Ports and data flow.
Site server -->
Distribution point, both standard and pull
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server -->
Domain controller
Description | UDP | TCP |
---|---|---|
Lightweight Directory Access Protocol (LDAP) | 389 | 389 |
Secure LDAP (LDAPS, for signing and binding) | 636 | 636 |
Global catalog LDAP | -- | 3268 |
RPC Endpoint Mapper | -- | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server <-->
Certificate registration point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server <-->
CMG connection point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server <-->
Endpoint Protection point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server <-->
Enrollment point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server <-->
Enrollment proxy point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server <-->
Fallback status point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server -->
internet
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 Note 1 |
HTTPS | -- | 443 |
Site server <-->
Issuing certification authority (CA)
This communication is used when you deploy certificate profiles by using the certificate registration point. The communication isn't used for every site server in the hierarchy. Instead, it's used only for the site server at the top of the hierarchy.
Description | UDP | TCP |
---|---|---|
RPC Endpoint Mapper | 135 | 135 |
RPC (DCOM) | -- | DYNAMIC Note 6 |
Site server -->
Server hosting remote content library share
You can move the content library to another storage location to free up hard drive space on your central administration or primary site servers. For more information, see Configure a remote content library for the site server.
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
Site server <-->
Service connection point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server <-->
Reporting services point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server <-->
Site server
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
Site server -->
SQL Server
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 2 Alternate port available |
During the installation of a site that uses a remote SQL Server to host the site database, open the following ports between the site server and the SQL Server:
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server -->
SQL Server for WSUS
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 3 Alternate port available |
Site server -->
SMS Provider
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
Site server <-->
Software update point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
RPC | -- | DYNAMIC Note 6 |
HTTP | -- | 80 or 8530 Note 3 |
HTTPS | -- | 443 or 8531 Note 3 |
Site server <-->
State migration point
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
RPC Endpoint Mapper | 135 | 135 |
SMS Provider -->
SQL Server
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 2 Alternate port available |
Software update point -->
internet
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 Note 1 |
Software update point -->
Upstream WSUS server
Description | UDP | TCP |
---|---|---|
HTTP | -- | 80 or 8530 Note 3 |
HTTPS | -- | 443 or 8531 Note 3 |
SQL Server -->
SQL Server
Intersite database replication requires the SQL Server at one site to communicate directly with the SQL Server at its parent or child site.
Description | UDP | TCP |
---|---|---|
SQL Server service | -- | 1433 Note 2 Alternate port available |
SQL Server Service Broker | -- | 4022 Note 2 Alternate port available |
Tip
Configuration Manager doesn't require the SQL Server Browser, which uses port UDP 1434.
State migration point -->
SQL Server
Description | UDP | TCP |
---|---|---|
SQL over TCP | -- | 1433 Note 2 Alternate port available |
Notes for ports used by clients and site systems
Note 1: Proxy server port
This port can't be configured but can be routed through a configured proxy server.
Note 2: Alternate port available
You can define an alternate port in Configuration Manager for this value. If you define a custom port, use that custom port in the IP filter information for IPsec policies or to configure firewalls.
Note 3: Windows Server Update Services (WSUS)
Since Windows Server 2012, by default WSUS uses port 8530 for HTTP and port 8531 for HTTPS.
After installation, you can change the port. You don't have to use the same port number throughout the site hierarchy.
If the HTTP port is 80, the HTTPS port must be 443.
If the HTTP port is anything else, the HTTPS port must be 1 or higher, for example, 8530 and 8531.
Note
When you configure the software update point to use HTTPS, the HTTP port must also be open. Unencrypted data, such as the EULA for specific updates, uses the HTTP port.
The site server makes a connection to the SQL Server hosting the SUSDB when you enable the following options for WSUS cleanup:
- Add non-clustered indexes to the WSUS database to improve WSUS cleanup performance
- Remove obsolete updates from the WSUS database
If you change the default SQL Server port to an alternate port with SQL Server Configuration Manager, make sure the site server can connect using the defined port. Configuration Manager doesn't support dynamic ports. By default, SQL Server named instances use dynamic ports for connections to the database engine. When you use a named instance, manually configure the static port.
Note 4: Trivial FTP (TFTP) Daemon
The Trivial FTP (TFTP) Daemon system service doesn't require a user name or password and is an integral part of Windows Deployment Services (WDS). The Trivial FTP Daemon service implements support for the TFTP protocol that's defined by the following RFCs:
RFC 1350: TFTP
RFC 2347: Option extension
RFC 2348: Block size option
RFC 2349: Time-out interval and transfer size options
TFTP is designed to support diskless boot environments. TFTP Daemons listen on UDP port 69 but respond from a dynamically allocated high port. If you enable this port, the TFTP service can receive incoming TFTP requests, but the selected server can't respond to those requests. You can't enable the selected server to respond to inbound TFTP requests unless you configure the TFTP server to respond from port 69.
The PXE-enabled distribution point and the client in Windows PE select dynamically allocated high ports for TFTP transfers. These ports are defined by Microsoft between 49152 and 65535. For more information, see Service overview and network port requirements for Windows.
However, during the actual PXE boot, the network card on the device selects the dynamically allocated high port it uses during the TFTP transfer. The network card on the device isn't bound to the dynamically allocated high ports defined by Microsoft. It's only bound to the ports defined in RFC 1350. This port can be any from 0 to 65535. For more information about what dynamically allocated high ports the network card uses, contact the device hardware manufacturer.
Note 5: Communication between the site server and site systems
By default, communication between the site server and site systems is bi-directional. The site server starts communication to configure the site system, and then most site systems connect back to the site server to send status information. Reporting service points and distribution points don't send status information. If you select Require the site server to initiate connections to this site system on the site system properties after the site system has been installed, the site system won't start communication with the site server. Instead, the site server starts the communication. It uses the site system installation account for authentication to the site system server.
Note 6: Dynamic ports
Dynamic ports use a range of port numbers that's defined by the OS version. These ports are also known as ephemeral ports. For more information about the default port ranges, see Service overview and network port requirements for Windows.
Other ports
The following sections provide more information about ports that Configuration Manager uses.
Client to server shares
Clients use Server Message Block (SMB) whenever they connect to UNC shares. For example:
Manual client installation that specifies the CCMSetup.exe
/source:
command-line propertyEndpoint Protection clients that download definition files from a UNC path
Description | UDP | TCP |
---|---|---|
Server Message Block (SMB) | -- | 445 |
Connections to SQL Server
For communication to the SQL Server database engine and for intersite replication, you can use the default SQL Server port or specify custom ports:
Intersite communications use:
SQL Server Service Broker, which defaults to port TCP 4022.
SQL Server service, which defaults to port TCP 1433.
Intrasite communication between the SQL Server database engine and various Configuration Manager site system roles defaults to port TCP 1433.
Configuration Manager uses the same ports and protocols to communicate with each SQL Server Always On availability group replica that hosts the site database as if the replica was a standalone SQL Server instance.
When you use Azure and the site database is behind an internal or external load balancer, configure the following components:
- Firewall exceptions on each replica
- Load-balancing rules
Configure the following ports:
- SQL over TCP: TCP 1433
- SQL Server Service Broker: TCP 4022
- Server Message Block (SMB): TCP 445
- RPC Endpoint Mapper: TCP 135
Warning
Configuration Manager doesn't support dynamic ports. By default, SQL Server named instances use dynamic ports for connections to the database engine. When you use a named instance, manually configure the static port for intrasite communication.
The following site system roles communicate directly with the SQL Server database:
Certificate registration point role
Enrollment point role
Management point
Site server
Reporting Services point
SMS Provider
SQL Server
-->
SQL Server
When a SQL Server hosts a database from more than one site, each database must use a separate instance of SQL Server. Configure each instance with a unique set of ports.
If you enable a host-based firewall on the SQL Server, configure it to allow the correct ports. Also configure network firewalls in between computers that communicate with the SQL Server.
For an example of how to configure SQL Server to use a specific port, see Configure a server to listen on a specific TCP port.
Discovery and publishing
Configuration Manager uses the following ports for the discovery and publishing of site information:
- Lightweight Directory Access Protocol (LDAP): 389
- Secure LDAP (LDAPS, for signing and binding): 636
- Global catalog LDAP: 3268
- RPC Endpoint Mapper: 135
- RPC: Dynamically allocated high TCP ports
- TCP: 1024: 5000
- TCP: 49152: 65535
External connections made by Configuration Manager
On-premises Configuration Manager clients or site systems can make the following external connections:
Installation requirements for site systems that support internet-based clients
Note
This section only applies to internet-based client management (IBCM). It doesn't apply to the cloud management gateway. For more information, see Manage clients on the internet.
Internet-based management points, distribution points that support internet-based clients, the software update point, and the fallback status point use the following ports for installation and repair:
Site server
-->
Site system: RPC endpoint mapper using UDP and TCP port 135Site server
-->
Site system: RPC dynamic TCP portsSite server
<-->
Site system: Server message blocks (SMB) using TCP port 445
Application and package installations on distribution points require the following RPC ports:
Site server
-->
Distribution point: RPC endpoint mapper using UDP and TCP port 135Site server
-->
Distribution point: RPC dynamic TCP ports
Use IPsec to help secure the traffic between the site server and site systems. If you must restrict the dynamic ports that are used with RPC, you can use the Microsoft RPC configuration tool (rpccfg.exe). Use the tool to configure a limited range of ports for these RPC packets. For more information, see How to configure RPC to use certain ports and how to help secure those ports by using IPsec.
Important
Before you install these site systems, make sure that the remote registry service is running on the site system server and that you have specified a site system installation account if the site system is in a different Active Directory forest without a trust relationship. For example, the remote registry service is used on servers running site systems such as distribution points (both pull and standard) and remote SQL Servers.
Ports used by Configuration Manager client installation
The ports that Configuration Manager uses during client installation depends on the deployment method:
For a list of ports for each client deployment method, see Ports used during Configuration Manager client deployment
For more information about how to configure Windows Firewall on the client for client installation and post-installation communication, see Windows Firewall and port settings for clients
Ports used by migration
The site server that runs migration uses several ports to connect to applicable sites in the source hierarchy. For more information, see Required configurations for migration.
Ports used by Windows Server
The following table lists some of the key ports used by Windows Server.
Description | UDP | TCP |
---|---|---|
DNS | 53 | 53 |
DHCP | 67 and 68 | -- |
NetBIOS Name Resolution | 137 | -- |
NetBIOS Datagram Service | 138 | -- |
NetBIOS Session Service | -- | 139 |
Kerberos authentication | -- | 88 |
For more information, see the following articles:
Diagram
The following diagram shows the connections between the main components that are in a typical Configuration Manager site. It currently doesn't include all connections.