Configuration of Non-Plug and Play Serial Device Connected to an RS-232 Port
This topic describes the typical configuration of hardware, drivers, and device stacks for legacy serial devices that are connected to an RS-232 port.
The following diagram shows the typical configuration for a non-Plug and Play Toaster device.
Serenum is not used to install a non-Plug and Play serial device. The installation of the Toaster device stack is device-specific. To communicate with the Toaster device, the Toaster driver opens the COM port that is associated with the RS-232 port.
Feedback
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see: https://aka.ms/ContentUserFeedback.
Submit and view feedback for