Test-PowerShellConnectivity
This cmdlet is available only in on-premises Exchange.
Use the Test-PowerShellConnectivity cmdlet to test client connectivity to Exchange remote PowerShell virtual directories.
Note: This cmdlet works best in Exchange 2010. In later versions of Exchange, the functionality of this cmdlet has been replaced by Managed Availability. For the best results, use the Invoke-MonitoringProbe cmdlet and specify the relevant active monitor probe instead of using this cmdlet.
For information about the parameter sets in the Syntax section below, see Exchange cmdlet syntax.
Syntax
Test-PowerShellConnectivity
-ConnectionUri <Uri>
-TestCredential <PSCredential>
[-Authentication <AuthenticationMethod>]
[-Confirm]
[-DomainController <Fqdn>]
[-MailboxServer <ServerIdParameter>]
[-MonitoringContext]
[-ResetTestAccountCredentials]
[-TrustAnySSLCertificate]
[-WhatIf]
[<CommonParameters>] Test-PowerShellConnectivity
[[-ClientAccessServer] <ServerIdParameter>]
[-TestType <OwaConnectivityTestType>]
[-VirtualDirectoryName <String>]
[-Authentication <AuthenticationMethod>]
[-Confirm]
[-DomainController <Fqdn>]
[-MailboxServer <ServerIdParameter>]
[-MonitoringContext]
[-ResetTestAccountCredentials]
[-TrustAnySSLCertificate]
[-WhatIf]
[<CommonParameters>] Description
The Test-PowerShellConnectivity cmdlet tests Exchange remote PowerShell connectivity by connecting to a specified remote PowerShell virtual directory, to any remote PowerShell virtual directories on a specified Exchange server, or to any remote PowerShell virtual directories that are available in the local Active Directory site.
The first time you use this cmdlet, you might be required to create a test user. To create a test user, run the following command:
& $env:ExchangeInstallPath\Scripts\New-TestCasConnectivityUser.ps1
The test results are displayed on-screen. The cmdlet returns the following information.
- CasServer: The Exchange server that the client connected to.
- LocalSite: The name of the local Active Directory site.
- Scenario: The operations that are tested. Values are: Logon User.
- Result: The values returned are typically Success, Skipped or Failure.
- Latency(MS): The time required to complete the test in milliseconds.
- Error: Any error messages that were encountered.
You can write the results to a file by piping the output to ConvertTo-Html and Set-Content. For example: Test-PowerShellConnectivity -ClientAccessServer MBX01 | ConvertTo-Html | Set-Content -Path "C:\My Documents\PowerShell Test.html".
You need to be assigned permissions before you can run this cmdlet. Although this topic lists all parameters for the cmdlet, you may not have access to some parameters if they're not included in the permissions assigned to you. To find the permissions required to run any cmdlet or parameter in your organization, see Find the permissions required to run any Exchange cmdlet.
Examples
Example 1
Test-PowerShellConnectivity -ClientAccessServer MBX2 -VirtualDirectoryName "PowerShell (Default Web Site)" -TrustAnySSLCertificateThis example tests the PowerShell (Default Web Site) virtual directory on the MBX2 server. The TrustAnySSLCertificate switch is used to skip the certificate check during connection.
Example 2
$UserCredentials = Get-Credential
Test-PowerShellConnectivity -ConnectionUri https://contoso.com/powershell -TestCredential $UserCredentials -Authentication BasicThis example tests the remote PowerShell virtual directory that's available at https://contoso.com/powershell. A mismatch between the SSL certificate and the URL isn't expected, so the TrustAnySSLCertificate switch isn't used. The virtual directory is configured to use Basic authentication.
The credentials that are used to connect to the virtual directory are stored in the $UserCredentials variable. The test is then run as previously described.
Parameters
-Authentication
The Authentication parameter specifies the type of authentication that's used to connect. Valid values are:
- Default
- Basic
- Credssp
- Digest
- Kerberos
- Negotiate
| Type: | AuthenticationMethod |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ClientAccessServer
The ClientAccessServer parameter specifies the Exchange server to test. This server has the Client Access server role installed, and is responsible for accepting client connections.
You can use any value that uniquely identifies the server. For example:
- Name
- Distinguished name (DN)
- ExchangeLegacyDN
- GUID
You can't use this parameter with the ConnectionUri parameter.
| Type: | ServerIdParameter |
| Position: | 1 |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | True |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-Confirm
The Confirm switch specifies whether to show or hide the confirmation prompt. How this switch affects the cmdlet depends on if the cmdlet requires confirmation before proceeding.
- Destructive cmdlets (for example, Remove-* cmdlets) have a built-in pause that forces you to acknowledge the command before proceeding. For these cmdlets, you can skip the confirmation prompt by using this exact syntax:
-Confirm:$false. - Most other cmdlets (for example, New-* and Set-* cmdlets) don't have a built-in pause. For these cmdlets, specifying the Confirm switch without a value introduces a pause that forces you acknowledge the command before proceeding.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ConnectionUri
The ConnectionUri parameter specifies the URL of the remote PowerShell virtual directory to test, for example, https://contoso.com/powershell.
You can't use this parameter with the ClientAccessServer parameter.
| Type: | Uri |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-DomainController
The DomainController parameter specifies the domain controller that's used by this cmdlet to read data from or write data to Active Directory. You identify the domain controller by its fully qualified domain name (FQDN). For example, dc01.contoso.com.
| Type: | Fqdn |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-MailboxServer
The MailboxServer parameter specifies the Exchange Mailbox server that you want to test. This parameter identifies the backend server that accepts proxied connections from the frontend server where clients connect.
You can use any value that uniquely identifies the server. For example:
- Name
- Distinguished name (DN)
- ExchangeLegacyDN
- GUID
If you don't use this parameter, connections to all Mailbox servers in the local Active Directory site are tested.
| Type: | ServerIdParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-MonitoringContext
The MonitoringContext switch includes the associated monitoring events and performance counters in the results. You don't need to specify a value with this switch.
Typically, you include the monitoring events and performance counters in the results when the output is passed to Microsoft System Center Operations Manager (SCOM).
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-ResetTestAccountCredentials
The ResetTestAccountCredentials switch resets the password for the test account that's used to run this command. You don't need to specify a value with this switch.
The password for the test account is typically reset every seven days. Use this switch to force a password reset any time it's required for security reasons.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-TestCredential
The TestCredential parameter specifies the credentials to use for the test.
A value for this parameter requires the Get-Credential cmdlet. To pause this command and receive a prompt for credentials, use the value (Get-Credential). Or, before you run this command, store the credentials in a variable (for example, $cred = Get-Credential) and then use the variable name ($cred) for this parameter. For more information, see Get-Credential.
You can only use this parameter with the ConnectionUri parameter.
| Type: | PSCredential |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-TestType
The TestType parameter specifies whether the command tests internal or external URLs. Values are Internal and External. The default value is Internal.
You can only use this parameter with the ClientAccessServer parameter.
| Type: | OwaConnectivityTestType |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-TrustAnySSLCertificate
The TrustAnySSLCertificate switch allows Exchange to accept certificates from untrusted certification authorities (CAs). You don't need to specify a value with this switch.
This switch is useful for testing internal URLs, because a URL that has an associated certificate is typically an external URL. This switch lets the task check an internal URL without generating an error when the certificate doesn't match the URL.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-VirtualDirectoryName
The VirtualDirectoryName parameter specifies the name of the remote PowerShell virtual directory that you want to test. Enclose values that contain spaces in quotation marks (").
You can only use this parameter with the ClientAccessServer parameter. If you don't use this parameter, all available remote PowerShell virtual directories on the server are tested.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
-WhatIf
The WhatIf switch simulates the actions of the command. You can use this switch to view the changes that would occur without actually applying those changes. You don't need to specify a value with this switch.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
| Applies to: | Exchange Server 2010, Exchange Server 2013, Exchange Server 2016, Exchange Server 2019 |
Inputs
Input types
To see the input types that this cmdlet accepts, see Cmdlet Input and Output Types. If the Input Type field for a cmdlet is blank, the cmdlet doesn't accept input data.
Outputs
Output types
To see the return types, which are also known as output types, that this cmdlet accepts, see Cmdlet Input and Output Types. If the Output Type field is blank, the cmdlet doesn't return data.