Tutorial: Deploy configurations using GitOps on an Azure Arc-enabled Kubernetes cluster

Статия
09/20/2024

Important

This tutorial is for GitOps with Flux v1. GitOps with Flux v2 is now available for Azure Arc-enabled Kubernetes and Azure Kubernetes Service (AKS) clusters; go to the tutorial for GitOps with Flux v2. We recommend migrating to Flux v2 as soon as possible.

Support for Flux v1-based cluster configuration resources created prior to January 1, 2024 will end on May 24, 2025. Starting on January 1, 2024, you won't be able to create new Flux v1-based cluster configuration resources.

In this tutorial, you will apply Flux v1 configurations using GitOps on an Azure Arc-enabled Kubernetes cluster. You'll learn how to:

Create a configuration on an Azure Arc-enabled Kubernetes cluster using an example Git repository.
Validate that the configuration was successfully created.
Apply configuration from a private Git repository.
Validate the Kubernetes configuration.

Prerequisites

An Azure account with an active subscription. Create an account for free.
An existing Azure Arc-enabled Kubernetes connected cluster. If you haven't connected a cluster yet, walk through our Connect an Azure Arc-enabled Kubernetes cluster quickstart.
Install the k8s-configuration Azure CLI extension of version >= 1.0.0:
```
az extension add --name k8s-configuration
```
Tip

If the k8s-configuration extension is already installed, you can update it to the latest version using the following command - az extension update --name k8s-configuration

Create a configuration

The example repository used in this article is structured around the persona of a cluster operator. The manifests in this repository provision a few namespaces, deploy workloads, and provide some team-specific configuration. Using this repository with GitOps creates the following resources on your cluster:

Namespaces: cluster-config, team-a, team-b
Deployment: arc-k8s-demo
ConfigMap: team-a/endpoints

The config-agent polls Azure for new or updated configurations. This task will take up to 5 minutes.

If you are associating a private repository with the configuration, complete the steps below in Apply configuration from a private Git repository.

Important

Use Azure CLI

Use the Azure CLI extension for k8s-configuration to link a connected cluster to the example Git repository.

Name this configuration cluster-config.
Instruct the agent to deploy the operator in the cluster-config namespace.

Give the operator cluster-admin permissions.

az k8s-configuration flux create --name cluster-config --cluster-name AzureArcTest1 --resource-group AzureArcTest --operator-instance-name cluster-config --operator-namespace cluster-config --repository-url https://github.com/Azure/arc-k8s-demo --scope cluster --cluster-type connectedClusters

{
  "complianceStatus": {
  "complianceState": "Pending",
  "lastConfigApplied": "0001-01-01T00:00:00",
  "message": "{\"OperatorMessage\":null,\"ClusterState\":null}",
  "messageLevel": "3"
  },
  "configurationProtectedSettings": {},
  "enableHelmOperator": false,
  "helmOperatorProperties": null,
  "id": "/subscriptions/<sub id>/resourceGroups/<group name>/providers/Microsoft.Kubernetes/connectedClusters/<cluster name>/providers/Microsoft.KubernetesConfiguration/sourceControlConfigurations/cluster-config",
  "name": "cluster-config",
  "operatorInstanceName": "cluster-config",
  "operatorNamespace": "cluster-config",
  "operatorParams": "--git-readonly",
  "operatorScope": "cluster",
  "operatorType": "Flux",
  "provisioningState": "Succeeded",
  "repositoryPublicKey": "",
  "repositoryUrl": "https://github.com/Azure/arc-k8s-demo",
  "resourceGroup": "MyRG",
  "sshKnownHostsContents": "",
  "systemData": {
    "createdAt": "2020-11-24T21:22:01.542801+00:00",
    "createdBy": null,
    "createdByType": null,
    "lastModifiedAt": "2020-11-24T21:22:01.542801+00:00",
    "lastModifiedBy": null,
    "lastModifiedByType": null
  },
  "type": "Microsoft.KubernetesConfiguration/sourceControlConfigurations"
}

Use a public Git repository

Parameter	Format
`--repository-url`	http[s]://server/repo[.git]

Use a private Git repository with SSH and Flux-created keys

Add the public key generated by Flux to the user account in your Git service provider. If the key is added to the repository instead of the user account, use git@ in place of user@ in the URL.

Jump to the Apply configuration from a private Git repository section for more details.

Parameter	Format	Notes
`--repository-url`	ssh://user@server/repo[.git] or user@server:repo[.git]	`git@` may replace `user@`

Use a private Git repository with SSH and user-provided keys

Provide your own private key directly or in a file. The key must be in PEM format and end with newline (\n).

Add the associated public key to the user account in your Git service provider. If the key is added to the repository instead of the user account, use git@ in place of user@.

Jump to the Apply configuration from a private Git repository section for more details.

Parameter	Format	Notes
`--repository-url`	ssh://user@server/repo[.git] or user@server:repo[.git]	`git@` may replace `user@`
`--ssh-private-key`	base64-encoded key in PEM format	Provide key directly
`--ssh-private-key-file`	full path to local file	Provide full path to local file that contains the PEM-format key

Use a private Git host with SSH and user-provided known hosts

The Flux operator maintains a list of common Git hosts in its known hosts file to authenticate the Git repository before establishing the SSH connection. If you are using an uncommon Git repository or your own Git host, you can supply the host key so that Flux can identify your repo.

Just like private keys, you can provide your known_hosts content directly or in a file. When providing your own content, use the known_hosts content format specifications, along with either of the SSH key scenarios above.

Parameter	Format	Notes
`--repository-url`	ssh://user@server/repo[.git] or user@server:repo[.git]	`git@` may replace `user@`
`--ssh-known-hosts`	base64-encoded	Provide known hosts content directly
`--ssh-known-hosts-file`	full path to local file	Provide known hosts content in a local file

Use a private Git repository with HTTPS

Parameter	Format	Notes
`--repository-url`	https://server/repo[.git]	HTTPS with basic auth
`--https-user`	raw or base64-encoded	HTTPS username
`--https-key`	raw or base64-encoded	HTTPS personal access token or password

Note

Helm operator chart version 1.2.0+ supports the HTTPS Helm release private auth.
HTTPS Helm release is not supported for AKS managed clusters.
If you need Flux to access the Git repository through your proxy, you will need to update the Azure Arc agents with the proxy settings. For more information, see Connect using an outbound proxy server.

Additional Parameters

Customize the configuration with the following optional parameters:

Parameter	Description
`--enable-helm-operator`	Switch to enable support for Helm chart deployments.
`--helm-operator-params`	Chart values for Helm operator (if enabled). For example, `--set helm.versions=v3`.
`--helm-operator-chart-version`	Chart version for Helm operator (if enabled). Use version 1.2.0+. Default: '1.2.0'.
`--operator-namespace`	Name for the operator namespace. Default: 'default'. Max: 23 characters.
`--operator-params`	Parameters for operator. Must be given within single quotes. For example, `--operator-params='--git-readonly --sync-garbage-collection --git-branch=main'`

Options supported in `--operator-params`:

Option	Description
`--git-branch`	Branch of Git repository to use for Kubernetes manifests. Default is 'master'. Newer repositories have root branch named `main`, in which case you need to set `--git-branch=main`.
`--git-path`	Relative path within the Git repository for Flux to locate Kubernetes manifests.
`--git-readonly`	Git repository will be considered read-only. Flux will not attempt to write to it.
`--manifest-generation`	If enabled, Flux will look for .flux.yaml and run Kustomize or other manifest generators.
`--git-poll-interval`	Period at which to poll Git repository for new commits. Default is `5m` (5 minutes).
`--sync-garbage-collection`	If enabled, Flux will delete resources that it created, but are no longer present in Git.
`--git-label`	Label to keep track of sync progress. Used to tag the Git branch. Default is `flux-sync`.
`--git-user`	Username for Git commit.
`--git-email`	Email to use for Git commit.

If you don't want Flux to write to the repository and --git-user or --git-email aren't set, then --git-readonly will automatically be set.

For more information, see the Flux documentation.

Note

Flux defaults to sync from the master branch of the git repo. However, newer git repositories have the root branch named main, in which case you need to set --git-branch=main in the --operator-params.

Tip

You can create a configuration in the Azure portal in the GitOps tab of the Azure Arc-enabled Kubernetes resource.

Validate the configuration

Use the Azure CLI to validate that the configuration was successfully created.

az k8s-configuration show --name cluster-config --cluster-name AzureArcTest1 --resource-group AzureArcTest --cluster-type connectedClusters

The configuration resource will be updated with compliance status, messages, and debugging information.

{
  "complianceStatus": {
    "complianceState": "Installed",
    "lastConfigApplied": "2020-12-10T18:26:52.801000+00:00",
    "message": "...",
    "messageLevel": "Information"
  },
  "configurationProtectedSettings": {},
  "enableHelmOperator": false,
  "helmOperatorProperties": {
    "chartValues": "",
    "chartVersion": ""
  },
  "id": "/subscriptions/<sub id>/resourceGroups/AzureArcTest/providers/Microsoft.Kubernetes/connectedClusters/AzureArcTest1/providers/Microsoft.KubernetesConfiguration/sourceControlConfigurations/cluster-config",
  "name": "cluster-config",
  "operatorInstanceName": "cluster-config",
  "operatorNamespace": "cluster-config",
  "operatorParams": "--git-readonly",
  "operatorScope": "cluster",
  "operatorType": "Flux",
  "provisioningState": "Succeeded",
  "repositoryPublicKey": "...",
  "repositoryUrl": "git://github.com/Azure/arc-k8s-demo.git",
  "resourceGroup": "AzureArcTest",
  "sshKnownHostsContents": null,
  "systemData": {
    "createdAt": "2020-12-01T03:58:56.175674+00:00",
    "createdBy": null,
    "createdByType": null,
    "lastModifiedAt": "2020-12-10T18:30:56.881219+00:00",
    "lastModifiedBy": null,
    "lastModifiedByType": null
},
  "type": "Microsoft.KubernetesConfiguration/sourceControlConfigurations"
}

When a configuration is created or updated, a few things happen:

The Azure Arc config-agent monitors Azure Resource Manager for new or updated configurations (Microsoft.KubernetesConfiguration/sourceControlConfigurations) and notices the new Pending configuration.
The config-agent reads the configuration properties and creates the destination namespace.
The Azure Arc controller-manager creates a Kubernetes service account and maps it to ClusterRoleBinding or RoleBinding for the appropriate permissions (cluster or namespace scope). It then deploys an instance of flux.
If using the option of SSH with Flux-generated keys, flux generates an SSH key and logs the public key.
The config-agent reports status back to the configuration resource in Azure.

While the provisioning process happens, the configuration resource will move through a few state changes. Monitor progress with the az k8s-configuration show ... command above:

Stage change	Description
`complianceStatus`-> `Pending`	Represents the initial and in-progress states.
`complianceStatus` -> `Installed`	`config-agent` successfully configured the cluster and deployed `flux` without error.
`complianceStatus` -> `Failed`	`config-agent` ran into an error deploying `flux`. Details are provided in `complianceStatus.message` response body.

Apply configuration from a private Git repository

If you are using a private Git repository, you need to configure the SSH public key in your repository. Either you provide or Flux generates the SSH public key. You can configure the public key either on the specific Git repository or on the Git user that has access to the repository.

Get your own public key

If you generated your own SSH keys, then you already have the private and public keys.

Get the public key using Azure CLI

Use the following in Azure CLI if Flux is generating the keys.

az k8s-configuration show --resource-group <resource group name> --cluster-name <connected cluster name> --name <configuration name> --cluster-type connectedClusters --query 'repositoryPublicKey' 
"ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAREDACTED"

Get the public key from the Azure portal

Walk through the following in Azure portal if Flux is generating the keys.

In the Azure portal, navigate to the connected cluster resource.
In the resource page, select "GitOps" and see the list of configurations for this cluster.
Select the configuration that uses the private Git repository.
In the context window that opens, at the bottom of the window, copy the Repository public key.

Add public key using GitHub

Use one of the following options:

Option 1: Add the public key to your user account (applies to all repositories in your account):
1. Open GitHub and click on your profile icon at the top-right corner of the page.
2. Click on Settings.
3. Click on SSH and GPG keys.
4. Click on New SSH key.
5. Supply a Title.
6. Paste the public key without any surrounding quotes.
7. Click on Add SSH key.
Option 2: Add the public key as a deploy key to the Git repository (applies to only this repository):
1. Open GitHub and navigate to your repository.
2. Click on Settings.
3. Click on Deploy keys.
4. Click on Add deploy key.
5. Supply a Title.
6. Check Allow write access.
7. Paste the public key without any surrounding quotes.
8. Click on Add key.

Add public key using an Azure DevOps repository

Use the following steps to add the key to your SSH keys:

Under User Settings in the top right (next to the profile image), click SSH public keys.
Select + New Key.
Supply a name.
Paste the public key without any surrounding quotes.
Click Add.

Validate the Kubernetes configuration

After config-agent has installed the flux instance, resources held in the Git repository should begin to flow to the cluster. Check to see that the namespaces, deployments, and resources have been created with the following command:

kubectl get ns --show-labels

NAME              STATUS   AGE    LABELS
azure-arc         Active   24h    <none>
cluster-config    Active   177m   <none>
default           Active   29h    <none>
itops             Active   177m   fluxcd.io/sync-gc-mark=sha256.9oYk8yEsRwWkR09n8eJCRNafckASgghAsUWgXWEQ9es,name=itops
kube-node-lease   Active   29h    <none>
kube-public       Active   29h    <none>
kube-system       Active   29h    <none>
team-a            Active   177m   fluxcd.io/sync-gc-mark=sha256.CS5boSi8kg_vyxfAeu7Das5harSy1i0gc2fodD7YDqA,name=team-a
team-b            Active   177m   fluxcd.io/sync-gc-mark=sha256.vF36thDIFnDDI2VEttBp5jgdxvEuaLmm7yT_cuA2UEw,name=team-b

We can see that team-a, team-b, itops, and cluster-config namespaces have been created.

The flux operator has been deployed to cluster-config namespace, as directed by the configuration resource:

kubectl -n cluster-config get deploy  -o wide

NAME             READY   UP-TO-DATE   AVAILABLE   AGE   CONTAINERS   IMAGES                         SELECTOR
cluster-config   1/1     1            1           3h    flux         docker.io/fluxcd/flux:1.16.0   instanceName=cluster-config,name=flux
memcached        1/1     1            1           3h    memcached    memcached:1.5.15               name=memcached

Further exploration

You can explore the other resources deployed as part of the configuration repository using:

kubectl -n team-a get cm -o yaml
kubectl -n itops get all

Clean up resources

Delete a configuration using the Azure CLI or Azure portal. After you run the delete command, the configuration resource will be deleted immediately in Azure. Full deletion of the associated objects from the cluster should happen within 10 minutes. If the configuration is in a failed state when removed, the full deletion of associated objects can take up to an hour.

When a configuration with namespace scope is deleted, the namespace is not deleted by Azure Arc to avoid breaking existing workloads. If needed, you can delete this namespace manually using kubectl.

az k8s-configuration delete --name cluster-config --cluster-name AzureArcTest1 --resource-group AzureArcTest --cluster-type connectedClusters

Note

Any changes to the cluster that were the result of deployments from the tracked Git repository are not deleted when the configuration is deleted.

Important

Next steps

Advance to the next tutorial to learn how to implement CI/CD with GitOps.

Implement CI/CD with GitOps

Споделяне чрез

Tutorial: Deploy configurations using GitOps on an Azure Arc-enabled Kubernetes cluster

Prerequisites

Create a configuration

Use Azure CLI

Use a public Git repository

Use a private Git repository with SSH and Flux-created keys

Use a private Git repository with SSH and user-provided keys

Use a private Git host with SSH and user-provided known hosts

Use a private Git repository with HTTPS

Additional Parameters

Options supported in `--operator-params`:

Validate the configuration

Apply configuration from a private Git repository

Get your own public key

Get the public key using Azure CLI

Get the public key from the Azure portal

Add public key using GitHub

Add public key using an Azure DevOps repository

Validate the Kubernetes configuration

Further exploration

Clean up resources

Next steps

Обратна връзка

Допълнителни ресурси

Споделяне чрез

Tutorial: Deploy configurations using GitOps on an Azure Arc-enabled Kubernetes cluster

Prerequisites

Create a configuration

Use Azure CLI

Use a public Git repository

Use a private Git repository with SSH and Flux-created keys

Use a private Git repository with SSH and user-provided keys

Use a private Git host with SSH and user-provided known hosts

Use a private Git repository with HTTPS

Additional Parameters

Options supported in --operator-params:

Validate the configuration

Apply configuration from a private Git repository

Get your own public key

Get the public key using Azure CLI

Get the public key from the Azure portal

Add public key using GitHub

Add public key using an Azure DevOps repository

Validate the Kubernetes configuration

Further exploration

Clean up resources

Next steps

Обратна връзка

Допълнителни ресурси

Options supported in `--operator-params`: