Споделяне чрез

Performance tuning guidance for MapReduce on HDInsight and Azure Data Lake Storage Gen1

  • Статия

Prerequisites

Parameters

When running MapReduce jobs, here are the most important parameters that you can configure to increase performance on Data Lake Storage Gen1:

Parameter Description
Mapreduce.map.memory.mb The amount of memory to allocate to each mapper.
Mapreduce.job.maps The number of map tasks per job.
Mapreduce.reduce.memory.mb The amount of memory to allocate to each reducer.
Mapreduce.job.reduces The number of reduce tasks per job.

Mapreduce.map.memory / Mapreduce.reduce.memory

Adjust this number based on how much memory is needed for the map and/or reduce task. You can view the default values of mapreduce.map.memory and mapreduce.reduce.memory in Ambari via the Yarn configuration. In Ambari, navigate to YARN and view the Configs tab. The YARN memory will be displayed.

Mapreduce.job.maps / Mapreduce.job.reduces

This determines the maximum number of mappers or reducers to create. The number of splits determines how many mappers are created for the MapReduce job. Therefore, you may get fewer mappers than you requested if there are fewer splits than the number of mappers requested.

Guidance

Step 1: Determine number of jobs running

By default, MapReduce will use the entire cluster for your job. You can use less of the cluster by using fewer mappers than there are available containers. The guidance in this document assumes that your application is the only application running on your cluster.

Step 2: Set mapreduce.map.memory/mapreduce.reduce.memory

The size of the memory for map and reduce tasks will be dependent on your specific job. You can reduce the memory size if you want to increase concurrency. The number of concurrently running tasks depends on the number of containers. By decreasing the amount of memory per mapper or reducer, more containers can be created, which enable more mappers or reducers to run concurrently. Decreasing the amount of memory too much may cause some processes to run out of memory. If you get a heap error when running your job, increase the memory per mapper or reducer. Consider that adding more containers adds extra overhead for each additional container, which can potentially degrade performance. Another alternative is to get more memory by using a cluster that has higher amounts of memory or increasing the number of nodes in your cluster. More memory will enable more containers to be used, which means more concurrency.

Step 3: Determine total YARN memory

To tune mapreduce.job.maps/mapreduce.job.reduces, consider the amount of total YARN memory available for use. This information is available in Ambari. Navigate to YARN and view the Configs tab. The YARN memory is displayed in this window. Multiply the YARN memory with the number of nodes in your cluster to get the total YARN memory.

Total YARN memory = nodes * YARN memory per node

If you're using an empty cluster, then memory can be the total YARN memory for your cluster. If other applications are using memory, then you can choose to only use a portion of your cluster’s memory by reducing the number of mappers or reducers to the number of containers you want to use.

Step 4: Calculate number of YARN containers

YARN containers dictate the amount of concurrency available for the job. Take total YARN memory and divide that by mapreduce.map.memory.

# of YARN containers = total YARN memory / mapreduce.map.memory

Step 5: Set mapreduce.job.maps/mapreduce.job.reduces

Set mapreduce.job.maps/mapreduce.job.reduces to at least the number of available containers. You can experiment further by increasing the number of mappers and reducers to see if you get better performance. Keep in mind that more mappers will have additional overhead so having too many mappers may degrade performance.

CPU scheduling and CPU isolation are turned off by default so the number of YARN containers is constrained by memory.

Example calculation

Let’s say you currently have a cluster composed of 8 D14 nodes and you want to run an I/O intensive job. Here are the calculations you should do:

Step 1: Determine number of jobs running

For our example, we assume that our job is the only one running.

Step 2: Set mapreduce.map.memory/mapreduce.reduce.memory

For our example, you're running an I/O intensive job and decide that 3 GB of memory for map tasks is sufficient.

mapreduce.map.memory = 3GB

Step 3: Determine total YARN memory

total memory from the cluster is 8 nodes * 96GB of YARN memory for a D14 = 768GB

Step 4: Calculate # of YARN containers

# of YARN containers = 768 GB of available memory / 3 GB of memory = 256

Step 5: Set mapreduce.job.maps/mapreduce.job.reduces

mapreduce.map.jobs = 256

Limitations

Data Lake Storage Gen1 throttling

As a multi-tenant service, Data Lake Storage Gen1 sets account level bandwidth limits. If you hit these limits, you will start to see task failures. This can be identified by observing throttling errors in task logs. If you need more bandwidth for your job, please contact us.

To check if you are getting throttled, you need to enable the debug logging on the client side. Here’s how you can do that:

  1. Put the following property in the log4j properties in Ambari > YARN > Config > Advanced yarn-log4j: log4j.logger.com.microsoft.azure.datalake.store=DEBUG

  2. Restart all the nodes/service for the config to take effect.

  3. If you're getting throttled, you’ll see the HTTP 429 error code in the YARN log file. The YARN log file is in /tmp/<user>/yarn.log

Examples to run

To demonstrate how MapReduce runs on Data Lake Storage Gen1, the following is some sample code that was run on a cluster with the following settings:

  • 16 node D14v2
  • Hadoop cluster running HDI 3.6

For a starting point, here are some example commands to run MapReduce Teragen, Terasort, and Teravalidate. You can adjust these commands based on your resources.

Teragen

yarn jar /usr/hdp/current/hadoop-mapreduce-client/hadoop-mapreduce-examples.jar teragen -Dmapreduce.job.maps=2048 -Dmapreduce.map.memory.mb=3072 10000000000 adl://example/data/1TB-sort-input

Terasort

yarn jar /usr/hdp/current/hadoop-mapreduce-client/hadoop-mapreduce-examples.jar terasort -Dmapreduce.job.maps=2048 -Dmapreduce.map.memory.mb=3072 -Dmapreduce.job.reduces=512 -Dmapreduce.reduce.memory.mb=3072 adl://example/data/1TB-sort-input adl://example/data/1TB-sort-output

Teravalidate

yarn jar /usr/hdp/current/hadoop-mapreduce-client/hadoop-mapreduce-examples.jar teravalidate -Dmapreduce.job.maps=512 -Dmapreduce.map.memory.mb=3072 adl://example/data/1TB-sort-output adl://example/data/1TB-sort-validate