azdata bdc config

Статия
02/20/2023

Applies to: Azure Data CLI (azdata)

The following article provides reference for the sql commands in the azdata tool. For more information about other azdata commands, see azdata reference

Commands

Command	Description
azdata bdc config init	Initializes a Big Data Cluster configuration profile that can be used with bdc create.
azdata bdc config list	Lists available configuration profile choices.
azdata bdc config show	Shows the BDC's current config or the config of a local file you specify, i.e. custom/bdc.json.
azdata bdc config add	Add a value for a json path in a config file.
azdata bdc config remove	Remove a value for a json path in a config file.
azdata bdc config replace	Replace a value for a json path in a config file.
azdata bdc config patch	Patches a config file based on a json patch file.

azdata bdc config init

Initializes a Big Data Cluster configuration profile that can be used with bdc create. The specific source of the configuration profile can be specified in the arguments.

azdata bdc config init [--path -p] 
                       [--source -s]  
                       
[--force -f]  
                       
[--accept-eula -a]

Examples

Guided BDC config init experience - you will receive prompts for needed values.

azdata bdc config init

BDC config init with arguments, creates a configuration profile of aks-dev-test in ./custom.

azdata bdc config init --source aks-dev-test --target custom

Optional Parameters

`--path -p`

File path of where you would like the config profile placed, defaults to <cwd>/custom.

`--source -s`

Config profile source: ['kubeadm-dev-test', 'kubeadm-prod', 'openshift-prod', 'aks-dev-test-ha', 'aks-dev-test', 'aro-dev-test', 'openshift-dev-test', 'aro-dev-test-ha']

`--force -f`

Force overwrite of the target file.

`--accept-eula -a`

Do you accept the license terms? [yes/no]. If you do not want to use this arg, you may set the environment variable ACCEPT_EULA to 'yes'. The license terms for this product can be viewed at https://aka.ms/eula-azdata-en.

Global Arguments

`--debug`

Increase logging verbosity to show all debug logs.

`--help -h`

Show this help message and exit.

`--output -o`

Output format. Allowed values: json, jsonc, table, tsv. Default: json.

`--query -q`

JMESPath query string. See http://jmespath.org/ for more information and examples.

`--verbose`

Increase logging verbosity. Use --debug for full debug logs.

azdata bdc config list

Lists available configuration profile choices for use in bdc config init

azdata bdc config list [--config-profile -c] 
                       [--type -t]  
                       
[--accept-eula -a]

Examples

Shows all available configuration profile names.

azdata bdc config list

Shows json of a specific configuration profile.

azdata bdc config list --config-profile aks-dev-test

Optional Parameters

`--config-profile -c`

Default config profile: ['kubeadm-dev-test', 'kubeadm-prod', 'openshift-prod', 'aks-dev-test-ha', 'aks-dev-test', 'aro-dev-test', 'openshift-dev-test', 'aro-dev-test-ha']

`--type -t`

What config type you would like to see.

`--accept-eula -a`

Global Arguments

`--debug`

Increase logging verbosity to show all debug logs.

`--help -h`

Show this help message and exit.

`--output -o`

Output format. Allowed values: json, jsonc, table, tsv. Default: json.

`--query -q`

JMESPath query string. See http://jmespath.org/ for more information and examples.

`--verbose`

Increase logging verbosity. Use --debug for full debug logs.

azdata bdc config show

Shows the BDC's current config or the config of a local file you specify, i.e. custom/bdc.json. The command can also take in a json path if you would like to only get a section. You can also specify a target file to output to. If a target file is not specified, it will just be output to the terminal.

azdata bdc config show [--config-file -c] 
                       [--target -t]  
                       
[--json-path -j]  
                       
[--force -f]

Examples

Show the BDC config in your console

azdata bdc config show

In a local config file, get a value at the end of a simple json key path.

azdata bdc config show --config-file custom-config/bdc.json --json-path "metadata.name" --target section.json

In a local config file, gets the resources within a service

azdata bdc config show --config-file custom-config/bdc.json --json-path "$.spec.services.sql.resources" --target section.json

Optional Parameters

`--config-file -c`

Big data cluster config file path if you don't want the config of the cluster you are currently signed-in to, i.e. custom/bdc.json

`--target -t`

Output file to store the result in. Default: directed to stdout.

`--json-path -j`

The json key path that leads to the section or value you want from the config, i.e. key1.key2.key3. Uses the jsonpath query language, https://jsonpath.com/, for example: -j '$.spec.pools[?(@.spec.type == "Master")]..endpoints'

`--force -f`

Force overwrite of the target file.

Global Arguments

`--debug`

Increase logging verbosity to show all debug logs.

`--help -h`

Show this help message and exit.

`--output -o`

Output format. Allowed values: json, jsonc, table, tsv. Default: json.

`--query -q`

JMESPath query string. See http://jmespath.org/ for more information and examples.

`--verbose`

Increase logging verbosity. Use --debug for full debug logs.

azdata bdc config add

Adds the value at the json path in the config file. All examples below are given in Bash. If using another command line, please be aware that you may need to escape quotations appropriately. Alternatively, you may use the patch file functionality.

azdata bdc config add --path -p 
                      --json-values -j

Examples

Ex 1 - Add control plane storage.

azdata bdc config add --path custom/control.json --json-values "spec.storage={"accessMode":"ReadWriteOnce","className":"managed-premium","size":"10Gi"}"

Required Parameters

`--path -p`

Big data cluster config file path of the config you would like to set, i.e. custom/bdc.json

`--json-values -j`

A key value pair list of json paths to values: key1.subkey1=value1,key2.subkey2=value2. You may provide inline json values such as: key='{"kind":"cluster","name":"test-cluster"}' or provide a file path, such as key=./values.json. Add does NOT support conditionals. If the inline value you are providing is a key value pair itself with '=' and ',' please escape those characters. For example, key1="key2=val2,key3=val3". Please see http://jsonpatch.com/ for examples of how your path should look. If you would like to access an array, you must do so by indicating the index, such as key.0=value

Global Arguments

`--debug`

Increase logging verbosity to show all debug logs.

`--help -h`

Show this help message and exit.

`--output -o`

Output format. Allowed values: json, jsonc, table, tsv. Default: json.

`--query -q`

JMESPath query string. See http://jmespath.org/ for more information and examples.

`--verbose`

Increase logging verbosity. Use --debug for full debug logs.

azdata bdc config remove

Removes the value at the json path in the config file. All examples below are given in Bash. If using another command line, please be aware that you may need to escape quotations appropriately. Alternatively, you may use the patch file functionality.

azdata bdc config remove --path -p 
                         --json-path -j

Examples

Ex 1 - Remove control plane storage.

azdata bdc config remove --path custom/control.json --json-path ".spec.storage"

Required Parameters

`--path -p`

Big data cluster config file path of the config you would like to set, i.e. custom/bdc.json

`--json-path -j`

A list of json paths based on the jsonpatch library that indicates which values you would like removed, such as: key1.subkey1,key2.subkey2. Remove does NOT support conditionals. Please see http://jsonpatch.com/ for examples of how your path should look. If you would like to access an array, you must do so by indicating the index, such as key.0=value

Global Arguments

`--debug`

Increase logging verbosity to show all debug logs.

`--help -h`

Show this help message and exit.

`--output -o`

Output format. Allowed values: json, jsonc, table, tsv. Default: json.

`--query -q`

JMESPath query string. See http://jmespath.org/ for more information and examples.

`--verbose`

Increase logging verbosity. Use --debug for full debug logs.

azdata bdc config replace

Replaces the value at the json path in the config file. All examples below are given in Bash. If using another command line, please be aware that you may need to escape quotations appropriately. Alternatively, you may use the patch file functionality.

azdata bdc config replace --path -p 
                          --json-values -j

Examples

Ex 1 - Replace the port of a single endpoint (Controller Endpoint).

azdata bdc config replace --path custom/control.json --json-values "$.spec.endpoints[?(@.name=="Controller")].port=30080"

Ex 2 - Replace control plane storage.

azdata bdc config replace --path custom/control.json --json-values "spec.storage={"accessMode":"ReadWriteOnce","className":"managed-premium","size":"10Gi"}"

Ex 3 - Replace storage-0 resource spec, including replicas.

azdata bdc config replace --path custom/bdc.json --json-values "$.spec.resources.storage-0.spec={"replicas": 2,"storage": {"className": "managed-premium","size": "10Gi","accessMode": "ReadWriteOnce"},"type": "Storage"}"

Required Parameters

`--path -p`

Big data cluster config file path of the config you would like to set, i.e. custom/bdc.json

`--json-values -j`

A key value pair list of json paths to values: key1.subkey1=value1,key2.subkey2=value2. You may provide inline json values such as: key='{"kind":"cluster","name":"test-cluster"}' or provide a file path, such as key=./values.json. Replace supports conditionals through the jsonpath library. To use this, start your path with a $. This will allow you to do a conditional such as -j $.key1.key2[?(@.key3=='someValue'].key4=value. If the inline value you are providing is a key value pair itself with '=' and ',' please escape those characters. For example, key1="key2=val2,key3=val3". You may see examples below. For additional help, please see: https://jsonpath.com/

Global Arguments

`--debug`

Increase logging verbosity to show all debug logs.

`--help -h`

Show this help message and exit.

`--output -o`

Output format. Allowed values: json, jsonc, table, tsv. Default: json.

`--query -q`

JMESPath query string. See http://jmespath.org/ for more information and examples.

`--verbose`

Increase logging verbosity. Use --debug for full debug logs.

azdata bdc config patch

Patches the config file according to the given patch file. Please consult http://jsonpatch.com/ for a better understanding of how the paths should be composed. The replace operation can use conditionals in its path due to the jsonpath library https://jsonpath.com/. All patch json files must start with a key of "patch" that has an array of patches with their corresponding op (add, replace, remove), path, and value. The "remove" op does not require a value, just a path. Please see the examples below.

azdata bdc config patch --path 
                        --patch-file -p

Examples

Ex 1 - Replace the port of a single endpoint (Controller Endpoint) with patch file.

azdata bdc config patch --path custom/control.json --patch ./patch.json

    Patch File Example (patch.json):
        {"patch":[{"op":"replace","path":"$.spec.endpoints[?(@.name=="Controller")].port","value":30080}]}

Ex 2 - Replace control plane storage with patch file.

azdata bdc config patch --path custom/control.json --patch ./patch.json

    Patch File Example (patch.json):
        {"patch":[{"op":"replace","path":".spec.storage","value":{"accessMode":"ReadWriteMany","className":"managed-premium","size":"10Gi"}}]}

Ex 3 - Replace pool storage, including replicas (Storage Pool) with patch file.

azdata bdc config patch --path custom/bdc.json --patch ./patch.json

    Patch File Example (patch.json):
        {"patch":[{"op":"replace","path":"$.spec.resources.storage-0.spec","value":{"replicas": 2,"storage": {"className": "managed-premium","size": "10Gi","accessMode": "ReadWriteOnce"},"type": "Storage"}}]}

Required Parameters

`--path`

Big data cluster config file path of the config you would like to set, i.e. custom/bdc.json

`--patch-file -p`

Path to a patch json file that is based off the jsonpatch library: http://jsonpatch.com/. You must start your patch json file with a key called "patch", whose value is an array of patch operations you intend to make. For the path of a patch operation, you may use dot notation, such as key1.key2 for most operations. If you would like to do a replace operation, and you are replacing a value in an array that requires a conditional, please use the jsonpath notation by beginning your path with a $. This will allow you to do a conditional such as $.key1.key2[?(@.key3=='someValue'].key4. Please see the examples below. For additional help with conditionals, please see: https://jsonpath.com/.

Global Arguments

`--debug`

Increase logging verbosity to show all debug logs.

`--help -h`

Show this help message and exit.

`--output -o`

Output format. Allowed values: json, jsonc, table, tsv. Default: json.

`--query -q`

JMESPath query string. See http://jmespath.org/ for more information and examples.

`--verbose`

Increase logging verbosity. Use --debug for full debug logs.

Next steps

For more information about other azdata commands, see azdata reference.

For more information about how to install the azdata tool, see Install azdata.

Споделяне чрез

azdata bdc config

Commands

azdata bdc config init

Examples

Optional Parameters

--path -p

--source -s

--force -f

--accept-eula -a

Global Arguments

--debug

--help -h

--output -o

--query -q

--verbose

azdata bdc config list

Examples

Optional Parameters

--config-profile -c

--type -t

--accept-eula -a

Global Arguments

--debug

--help -h

--output -o

--query -q

--verbose

azdata bdc config show

Examples

Optional Parameters

--config-file -c

--target -t

--json-path -j

--force -f

Global Arguments

--debug

--help -h

--output -o

--query -q

--verbose

azdata bdc config add

Examples

Required Parameters

--path -p

--json-values -j

Global Arguments

--debug

--help -h

--output -o

--query -q

--verbose

azdata bdc config remove

Examples

Required Parameters

--path -p

--json-path -j

Global Arguments

--debug

--help -h

--output -o

--query -q

--verbose

azdata bdc config replace

Examples

Required Parameters

--path -p

--json-values -j

Global Arguments

--debug

--help -h

--output -o

--query -q

--verbose

azdata bdc config patch

Examples

Required Parameters

--path

--patch-file -p

Global Arguments

`--path -p`

`--source -s`

`--force -f`

`--accept-eula -a`

`--debug`

`--help -h`

`--output -o`

`--query -q`

`--verbose`

`--config-profile -c`

`--type -t`

`--accept-eula -a`

`--debug`

`--help -h`

`--output -o`

`--query -q`

`--verbose`

`--config-file -c`

`--target -t`

`--json-path -j`

`--force -f`

`--debug`

`--help -h`

`--output -o`

`--query -q`

`--verbose`

`--path -p`

`--json-values -j`

`--debug`

`--help -h`

`--output -o`

`--query -q`

`--verbose`

`--path -p`

`--json-path -j`

`--debug`

`--help -h`

`--output -o`

`--query -q`

`--verbose`

`--path -p`

`--json-values -j`

`--debug`

`--help -h`

`--output -o`

`--query -q`

`--verbose`

`--path`

`--patch-file -p`

`--debug`

`--help -h`

`--output -o`

`--query -q`

`--verbose`