Database Engine events and errors (10000 to 10999)

This article contains error message numbers (between the range 10,000 and 10,999) and their description, which is the text of the error message from the sys.messages catalog view. Where applicable, the error number is a link to further information.

For the full range of error numbers, see the list on Database Engine events and errors.

You can query the Database Engine to see a full list of all errors, by running the following query against the sys.messages catalog view:

SELECT message_id AS Error,
    severity AS Severity,
    [Event Logged] = CASE is_event_logged
        WHEN 0 THEN 'No' ELSE 'Yes'
        END,
    [text] AS [Description]
FROM sys.messages
WHERE language_id = 1040 /* replace 1040 with the desired language ID, such as 1033 for US English */
ORDER BY message_id;

SQL Server version

This article shows events and errors (between the range 10,000 and 10,999) for SQL Server 2022 (16.x). If you want to view events and errors for other versions of SQL Server, see:

• SQL Server 2019
• SQL Server 2017
• SQL Server 2016

Errors and events (10000 to 10999)

Error	Severity	Event logged	Description
10000	16	No	Unknown provider error.
10001	16	No	The provider reported an unexpected catastrophic failure.
10002	16	No	The provider did not implement the functionality.
10003	16	No	The provider ran out of memory.
10004	16	No	One or more arguments were reported invalid by the provider.
10005	16	No	The provider did not support an interface.
10006	16	No	The provider indicated an invalid pointer was used.
10007	16	No	The provider indicated an invalid handle was used.
10008	16	No	The provider terminated the operation.
10009	16	No	The provider did not give any information about the error.
10010	16	No	The data necessary to complete this operation was not yet available to the provider.
10011	16	No	Access denied.
10021	16	No	Execution terminated by the provider because a resource limit was reached.
10022	16	No	The provider called a method from IRowsetNotify in the consumer, and the method has not yet returned.
10023	16	No	The provider does not support the necessary method.
10024	16	No	The provider indicates that the user did not have the permission to perform the operation.
10025	16	No	Provider caused a server fault in an external process.
10026	16	No	No command text was set.
10027	16	No	Command was not prepared.
10028	16	No	Authentication failed.
10032	16	No	Cannot return multiple result sets (not supported by the provider).
10033	16	No	The specified index does not exist or the provider does not support an index scan on this data source.
10034	16	No	The specified table or view does not exist or contains errors.
10035	16	No	No value was given for one or more of the required parameters.
10042	16	No	Cannot set any properties while there is an open rowset.
10052	16	No	The insertion was canceled by the provider during notification.
10053	16	No	Could not convert the data value due to reasons other than sign mismatch or overflow.
10054	16	No	The data value for one or more columns overflowed the type used by the provider.
10055	16	No	The data violated the integrity constraints for one or more columns.
10056	16	No	The number of rows that have pending changes has exceeded the limit specified by the DBPROP_MAXPENDINGROWS property.
10057	16	No	Cannot create the row. Would exceed the total number of active rows supported by the rowset.
10058	16	No	The consumer cannot insert a new row before releasing previously-retrieved row handles.
10062	16	No	The change was canceled by the provider during notification.
10063	16	No	Could not convert the data value due to reasons other than sign mismatch or overflow.
10064	16	No	The data value for one or more columns overflowed the type used by the provider.
10065	16	No	The data violated the integrity constraints for one or more columns.
10066	16	No	The number of rows that have pending changes has exceeded the limit specified by the DBPROP_MAXPENDINGROWS property.
10067	16	No	The rowset was using optimistic concurrency and the value of a column has been changed after the containing row was last fetched or resynchronized.
10068	16	No	The consumer could not delete the row. A deletion is pending or has already been transmitted to the data source.
10069	16	No	The consumer could not delete the row. The insertion has been transmitted to the data source.
10081	16	No	The rowset uses integrated indexes and there is no current index.
10085	16	No	RestartPosition on the table was canceled during notification.
10086	16	No	The table was built over a live data stream and the position cannot be restarted.
10087	16	No	The provider did not release some of the existing rows.
10088	16	No	The order of the columns was not specified in the object that created the rowset. The provider had to reexecute the command to reposition the next fetch position to its initial position, and the order of the columns changed.
10100	16	No	Cannot create %S_MSG on view "%.*ls" because it contains the DISTINCT keyword. Consider removing DISTINCT from the view or not indexing the view. Alternatively, consider replacing DISTINCT with GROUP BY or COUNT_BIG(*) to simulate DISTINCT on grouping columns.
10101	16	No	Cannot create %S_MSG on view "%.*ls" because it contains the TOP or OFFSET keyword. Consider removing the TOP or OFFSET or not indexing the view.
10102	16	No	Cannot create %S_MSG on view "%.*ls" because it contains the TABLESAMPLE clause. Consider removing TABLESAMPLE or not indexing the view.
10103	16	No	Cannot create %S_MSG on view "%.*ls" because it uses OPENROWSET, OPENQUERY, or OPENDATASOURCE. Consider not indexing the view, or eliminating OPENQUERY, OPENROWSET, and OPENDATASOURCE.
10104	16	No	Cannot create %S_MSG on view "%.*ls" because it references a table using a CONTAINSTABLE or FREETEXTTABLE full-text function. Consider removing use of these functions or not indexing the view.
10105	16	No	Cannot create %S_MSG on view "%.*ls" because it uses the OPENXML rowset provider. Consider removing OPENXML or not indexing the view.
10106	16	No	Cannot create %S_MSG on view "%.*ls" because it references an internal system rowset provider. Consider not indexing this view.
10107	16	No	Cannot create %S_MSG on view "%.*ls" because it uses table variable "%.*ls". Consider not indexing this view or removing the reference to the table variable.
10108	16	No	Cannot create %S_MSG on view "%.*ls" because it references a SQL Server internal table.
10109	16	No	Cannot create %S_MSG on view "%.*ls" because it references derived table "%.*ls" (defined by SELECT statement in FROM clause). Consider removing the reference to the derived table or not indexing the view.
10110	16	No	Cannot create %S_MSG on view "%.*ls" because it contains an OUTER APPLY. Consider not indexing the view, or removing OUTER APPLY.
10111	16	No	Cannot create %S_MSG on view "%.*ls" because it contains a join using an ODBC standard escape syntax. Consider using an ANSI join syntax instead.
10112	16	No	Cannot create %S_MSG on view '%.*ls' because it contains an INNER join that specifies a join hint. Consider removing the join hint.
10113	16	No	Cannot create %S_MSG on view "%.*ls" because it uses a LEFT, RIGHT, or FULL OUTER join, and no OUTER joins are allowed in indexed views. Consider using an INNER join instead.
10114	16	No	Cannot create %S_MSG on view "%.*ls" because it uses the PIVOT operator. Consider not indexing this view.
10115	16	No	Cannot create %S_MSG on view "%.*ls" because it uses the UNPIVOT operator. Consider not indexing this view.
10116	16	No	Cannot create %S_MSG on view '%.*ls' because it contains one or more UNION, INTERSECT, or EXCEPT operators. Consider creating a separate indexed view for each query that is an input to the UNION, INTERSECT, or EXCEPT operators of the original view.
10117	16	No	Cannot create %S_MSG on view "%.*ls" because the view uses the "*" operator to select columns. Consider referencing columns by name instead.
10118	16	No	Cannot create %S_MSG on view "%.*ls" because it contains a GROUP BY ALL. Consider using a GROUP BY instead.
10119	16	No	Cannot create %S_MSG on view "%.*ls" because it contains a CUBE, ROLLUP, or GROUPING SETS operator. Consider not indexing this view.
10120	16	No	Cannot create %S_MSG on view "%.*ls" because it contains the ROLLUP operator. Consider not indexing this view.
10121	16	No	Cannot create %S_MSG on view "%.*ls" because it contains a HAVING clause. Consider removing the HAVING clause.
10122	16	No	Cannot create %S_MSG on view "%.*ls" because it contains a COMPUTE clause. Consider not indexing this view, or using a GROUP BY or aggregate view instead to replace the COMPUTE calculation of aggregate results.
10124	16	No	Cannot create %S_MSG on view "%.*ls" because it references an internal SQL Server column.
10125	16	No	Cannot create %S_MSG on view "%.*ls" because it uses aggregate "%.*ls". Consider eliminating the aggregate, not indexing the view, or using alternate aggregates. For example, for AVG substitute SUM and COUNT_BIG, or for COUNT, substitute COUNT_BIG.
10126	16	No	Cannot create %S_MSG on view "%.*ls" because it uses aggregate "%.*ls" with the DISTINCT keyword. Consider not indexing this view or eliminating DISTINCT. Consider use of a GROUP BY or COUNT_BIG(*) view to simulate DISTINCT on grouping columns.
10127	16	No	Cannot create %S_MSG on view "%.*ls" because it contains one or more subqueries. Consider changing the view to use only joins instead of subqueries. Alternatively, consider not indexing this view.
10128	16	No	Cannot create %S_MSG on view "%.*ls" because it uses a CONTAINS or FREETEXT full-text predicate. Consider eliminating CONTAINS or FREETEXT, or not indexing the view.
10129	16	No	Cannot create %S_MSG on view "%.*ls" because it references the inline or multistatement table-valued function "%.*ls". Consider expanding the function definition by hand in the view definition, or not indexing the view.
10130	16	No	Cannot create %S_MSG on view "%.*ls" because it uses non-deterministic common language runtime (CLR) table-valued function "%.*ls". Consider not indexing the view or changing it to not use this function.
10131	16	No	Cannot create %S_MSG on view "%.*ls" because it references imprecise common language runtime (CLR) table-valued function "%.*ls". Consider not indexing the view.
10132	16	No	Cannot create %S_MSG on view "%.*ls" because it references table valued common language runtime (CLR) function "%.*ls". Consider removing reference to the function or not indexing the view.
10133	16	No	Cannot create %S_MSG on view "%.*ls" because function "%.*ls" referenced by the view performs user or system data access.
10134	16	No	Cannot create %S_MSG on view "%.*ls" because it contains more than one APPLY. Consider not indexing the view, or using only one APPLY.
10136	16	No	Cannot create %S_MSG on view "%.*ls" because it uses the aggregate COUNT. Use COUNT_BIG instead.
10137	16	No	Cannot create %S_MSG on view "%.*ls" because it references common table expression "%.*ls". Views referencing common table expressions cannot be indexed. Consider not indexing the view, or removing the common table expression from the view definition.
10138	16	No	Cannot create %S_MSG on view '%.*ls' because its select list does not include a proper use of COUNT_BIG. Consider adding COUNT_BIG(*) to select list.
10139	16	No	Cannot create %S_MSG on view '%.*ls' because the view uses an implicit conversion from string to datetime or smalldatetime. Use an explicit CONVERT with a deterministic style value.
10140	16	No	Cannot create %S_MSG on view '%.*ls' because the view contains a table hint. Consider removing the hint.
10141	16	No	Cannot create %S_MSG on view '%.*ls' because it references CLR routine (function or method) '%.*ls' outside non-key columns of SELECT list. Recreate or alter view so it does not reference CLR routines except in non-key columns of SELECT list, and then create index.
10142	16	No	Cannot create %S_MSG on view "%.*ls" because it contains an APPLY. Consider not indexing the view, or removing APPLY.
10143	16	No	Cannot create %S_MSG on view "%.*ls" because it contains a ranking or aggregate window function. Remove the function from the view definition or, alternatively, do not index the view.
10144	16	No	Cannot create %S_MSG on view '%.*ls' because it uses the CHANGETABLE function.
10145	16	No	Cannot create %S_MSG on the view '%.*ls' because it references a sparse column set. Views that contain a sparse column set cannot be indexed. Consider removing the sparse column set from the view or not indexing the view.
10146	16	No	Cannot create %S_MSG on the view '%.*ls' because it uses the SEMANTICSIMILARITYTABLE, SEMANTICKEYPHRASETABLE or SEMANTICSIMILARITYDETAILSTABLE function.
10147	16	No	Cannot create %S_MSG on the view '%.*ls' because it uses temporal FOR SYSTEM_TIME clause.
10148	16	No	Cannot create %S_MSG on the view '%.*ls' because it uses OPENJSON.
10149	16	No	Index that has SNAPSHOT_MATERIALIZATION cannot be created on view '%.*ls' because view definition contains memory-optimized table(s).
10150	16	No	Cannot create %S_MSG on the view '%.*ls' because it references a scalar UDF that is inlineable.
10151	16	No	Cannot create %S_MSG on view "%.*ls" because it uses a ANTISEMI or SEMI join, and no SEMI joins are allowed in indexed views. Consider using an INNER join instead.
10211	16	No	Cannot invoke mutator on a null CLR type value.
10227	16	No	Field "%.*ls" of type "%.*ls.%.*ls" cannot be updated because the field is "%.*ls".
10240	16	No	Could not find UdtExtensions.dll. Please check your installation.
10300	16	No	Assembly '%.*ls' references assembly '%.*ls', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: %S_MSG). Please load the referenced assembly into the current database and retry your request.
10301	16	No	Assembly '%.*ls' references assembly '%.*ls', which is not present in the current database. SQL Server attempted to locate and automatically load the referenced assembly from the same location where referring assembly came from, but that operation has failed (reason: %s). Please load the referenced assembly into the current database and retry your request.
10302	16	No	Could not get path for SQL Server: '%ls'.
10303	16	Yes	Could not create AppDomain manager: '%.*ls'.
10304	16	No	Failed to enter Common Language Runtime (CLR) with HRESULT 0x%x. This may due to low resource conditions.
10305	16	No	The Init method for a CLR table-valued function must be annotated with SqlFunctionAttribute.
10306	16	No	The SqlFunctionAttribute of the Init method for a CLR table-valued function must set the FillRowMethodName property.
10307	16	No	The FillRowMethodName property of SqlFunctionAttribute does not contain a valid method name.
10308	10	No	Warning: The Microsoft .NET Framework assembly '%.*ls' you are registering is not fully tested in the SQL Server hosted environment and is not supported. In the future, if you upgrade or service this assembly or the .NET Framework, your CLR integration routine may stop working. Please refer SQL Server Books Online for more details.
10309	10	No	Warning: The SQL Server client assembly '%.*ls' you are registering is not fully tested in SQL Server hosted environment.
10310	10	Yes	AppDomain %i (%.*ls) is marked for unload due to common language runtime (CLR) or security data definition language (DDL) operations.
10311	10	Yes	AppDomain %i (%.*ls) is marked for unload due to memory pressure.
10312	16	No	.NET Framework execution was aborted. The UDP/UDF/CLR type did not revert thread token.
10313	16	No	An error occurred while using the .NET Framework during %S_MSG. The server may be running out of resources. Try running the query again. If the problem persist, contact a support professional. %.*ls
10314	16	No	An error occurred in the Microsoft .NET Framework while trying to load assembly id %d. The server may be running out of resources, or the assembly may not be trusted. Run the query again, or check documentation to see how to solve the assembly trust issues. For more information about this error: %.*ls
10316	16	No	The app domain with specified version id (%d) was unloaded due to memory pressure and could not be found.
10317	16	No	An error occurred trying to get file version info for the file '%s'.
10318	16	No	'%.*ls' failed because parameter %d of method '%.*ls' of type '%.*ls' is annotated with unsupported attribute System.ParamArrayAttribute.
10319	16	No	UserDefinedType method call failed because parameter %d of method '%.*ls' of type '%.*ls' is annotated with unsupported attribute System.ParamArrayAttribute.
10320	16	No	Method name '%.*ls' is invalid for '%.*ls'.
10321	16	No	Method name '%.*ls' is invalid for UserDefinedType method call.
10322	16	No	Type %.*ls not found in database %.*ls
10323	16	Yes	Invalid user code has been identified by .Net Framework Managed Debug Assistant %.*ls
10324	16	No	WITH ENCRYPTION option of CREATE TRIGGER is only applicable to T-SQL triggers and not to CLR triggers.
10325	16	Yes	The server is shutting down due to stack overflow in user's unmanaged code.
10326	16	Yes	Two versions of assembly '%.*ls' cannot coexist in database '%.*ls'. Keep one version and drop the other.
10327	14	No	%ls ASSEMBLY for assembly '%.*ls' failed because assembly '%.*ls' is not trusted. The assembly is trusted when either of the following is true: the assembly is signed with a certificate or an asymmetric key that has a corresponding login with UNSAFE ASSEMBLY permission, or the assembly is trusted using sp_add_trusted_assembly.
10328	16	No	There is not enough stack to create appdomain '%.*ls'.
10329	16	No	.Net Framework execution was aborted. %.*ls
10330	16	No	ALTER ASSEMBLY failed because serialization layout of type '%s' would change as a result of a change in type '%s' in the updated assembly. Persisted types are not allowed to change serialization layout.
10331	16	No	Type '%ls' in assembly '%.*ls' derives from a generic type which is not supported for a CLR Type.
10332	16	No	Assembly "%.*ls" was built using version %.*ls of the .NET Framework. SQL Server currently uses version %s.
10333	16	Yes	Failed to obtain ICLRAppDomainResourceMonitor interface from CLR. The error code from CLR was: 0x%x. As a result, resource monitoring won't work for AppDomain with ID %d.
10334	16	No	Changing the database compatibility level has caused data to be marked as unchecked in one or more objects in database %s. Refer to the column has_unchecked_assembly_data in the sys.tables and sys.views to locate all such objects.
10335	16	No	The Common Language Runtime (CLR) was loaded in an unsupported manner. This can occur if an extended stored procedure or OLE Automation object running in SQL Server calls into managed code before the CLR integration runtime host loads the CLR. You need to restart SQL Server to use CLR integration features.
10336	10	No	Failed to enque task to start CLR during SQL server startup. Error code: %u. CLR will be started in an on-demand fashion.
10337	16	No	An internal error occurred.
10338	16	No	Verification of assembly failed. Could not open the physical file '%.*ls': %ls.
10339	16	No	Verification of assembly failed. Could not read from the physical file "%.*ls": %ls.
10340	16	No	DROP ASSEMBLY failed. Error code: 0x%x.
10341	16	No	Assembly '%.*ls' cannot be loaded because Azure SQL Database does not support user-defined assemblies. Contact Azure Technical Support if you have questions.
10342	16	No	Assembly '%.*ls' cannot be loaded because this edition of SQL Server only supports SAFE assemblies.
10343	14	No	CREATE or ALTER ASSEMBLY for assembly '%.*ls' with the SAFE or EXTERNAL_ACCESS option failed because the 'clr strict security' option of sp_configure is set to 1. Microsoft recommends that you sign the assembly with a certificate or asymmetric key that has a corresponding login with UNSAFE ASSEMBLY permission. Alternatively, you can trust the assembly using sp_add_trusted_assembly.
10344	16	No	Internal table access error: failed to access the Trusted Assemblies internal table with HRESULT: 0x%x. Contact Customer Support Services.
10345	16	No	The assembly hash '0x%.*ls' is already trusted.
10346	16	No	The assembly hash '0x%.*ls' is not currently trusted. No action was taken.
10347	16	No	Common Language Runtime(CLR) is not enabled on this instance.
10501	16	No	Cannot create plan guide '%.*ls' because type '%.*ls' provided is not allowed.
10502	16	No	Cannot create plan guide '%.*ls' because the statement specified by @stmt and @module_or_batch, or by @plan_handle and @statement_start_offset, matches the existing plan guide '%.*ls' in the database. Drop the existing plan guide before creating the new plan guide.
10503	16	No	Operation '%.*ls' is not allowed.
10504	16	No	Cannot create plan guide '%.*ls' because parameter @hints is incorrect. Use N'OPTION ( <query_hint> [ ,...n ] )'.
10505	16	No	Cannot create plan guide '%.*ls' because value '%.*ls' provided for @module_or_batch is not legal two-part name. Use 'schema_name.object_name'.
10506	16	No	Cannot create plan guide '%.*ls' because parameter @stmt has more than one statement.
10507	16	No	Cannot create plan guide '%.*ls' because the statement specified by @stmt and @module_or_batch, or by @plan_handle and @statement_start_offset, does not match any statement in the specified module or batch. Modify the values to match a statement in the module or batch.
10508	16	No	Cannot '%ls' plan guide '%.*ls' because it does not exist or you do not have permission. Verify plan guide name and database of current session, and that you have needed permission.
10509	16	No	Cannot create plan guide '%.*ls' because the statement specified by @stmt or @statement_start_offset either contains a syntax error or is ineligible for use in a plan guide. Provide a single valid Transact-SQL statement or a valid starting position of the statement within the batch. To obtain a valid starting position, query the 'statement_start_offset' column in the sys.dm_exec_query_stats dynamic management function.
10510	16	No	Cannot create plan guide '%.*ls' because there is already a plan guide with that name in the database. Use a unique name.
10511	16	No	Cannot create plan guide '%.*ls' because @params is not NULL. @params must be NULL if @type is 'object'.
10512	16	No	Cannot create plan guide '%.*ls' because object '@module_or_batch' is encrypted. Consider tuning query using other techniques such as indexes and statistics.
10513	16	No	Cannot %S_MSG %S_MSG '%.*ls' because it is referenced by plan guide '%.*ls'. Use sp_control_plan_guide to drop the plan guide first. Record the plan guide definition for future use if needed.
10514	16	No	Cannot create plan guide '%.*ls' because @module_or_batch can not be large object when @type is object.
10515	16	No	Cannot create plan guide '%.*ls' because the module '%.*ls' does not exist or you do not have needed permission.
10516	16	No	Cannot create plan guide '%.*ls' because @module_or_batch can not be compiled.
10517	16	No	Cannot create plan guide '%.*ls' because you do not have needed permission. Alter database permission required.
10518	16	No	Cannot execute sp_control_plan_guide because of insufficient permissions to control plan guide '%.*ls'. Alter permission on object referenced by plan guide, or alter database permission required.
10519	16	No	Cannot create plan guide '%.*ls' because the hints specified in @hints cannot be applied to the statement specified by either @stmt or @statement_start_offset. Verify that the hints can be applied to the statement.
10520	16	No	Cannot create plan guide '%.*ls' because @type was specified as '%ls' and a non-NULL value is specified for the parameter '%ls'. This type requires a NULL value for the parameter. Specify NULL for the parameter, or change the type to one that allows a non-NULL value for the parameter.
10521	16	No	Cannot create plan guide '%.*ls' because @type was specified as '%ls' and the parameter '%ls' is NULL. This type requires a non-NULL value for the parameter. Specify a non-NULL value for the parameter, or change the type to one that allows a NULL value for the parameter.
10522	16	No	Cannot create plan guide '%.*ls' because @hints has illegal value. @hints must be OPTION(PARAMETERIZATION FORCED) or OPTION(PARAMETERIZATION SIMPLE) if @type is 'template'.
10523	16	No	Cannot generate query template because @querytext does not contain a valid single query.
10524	16	No	Cannot parameterize @querytext.
10525	10	No	Plan guide '%.*ls' matched statement after it was parameterized automatically by FORCED or SIMPLE parameterization, but the RECOMPILE hint it contains was ignored. RECOMPILE is not supported on automatically parameterized statements. Consider dropping this plan guide or removing RECOMPILE from it.
10526	16	No	Cannot drop %S_MSG '%.*ls' because its trigger '%.*ls' is referenced by plan guide '%.*ls'. Use sp_control_plan_guide to drop the plan guide first. Record the plan guide definition for future use if needed.
10527	16	No	Cannot create plan guide '%.*ls' because the object '%.*ls' is a temporary object.
10528	16	No	Cannot create plan guide '%.*ls' because its name is invalid. Plan guide name cannot begin with a '#' character.
10529	16	No	Cannot create plan guide '%.*ls' because there is already a planguide '%.*ls' of @type 'template' on @stmt.
10530	16	No	Cannot create plan guide '%.*ls' because the statement specified by @statement_start_offset does not match any statement in specified module or batch. Consider modifying @statement_start_offset to match a statement in module or batch.
10531	16	No	Cannot create plan guide '%.*ls' from cache because the user does not have adequate permissions. Grant the VIEW SERVER STATE permission to the user creating the plan guide.
10532	16	No	Cannot create plan guide '%.*ls' because the batch or module specified by @plan_handle does not contain a statement that is eligible for a plan guide. Specify a different value for @plan_handle.
10533	16	No	Cannot create plan guide '%.*ls' because the plan guide name exceeds 124, the maximum number of characters allowed. Specify a name that contains fewer than 125 characters.
10534	16	No	Cannot create plan guide '%.*ls' because the value specified for @params is invalid. Specify the value in the form <parameter_name> <parameter_type>, or specify NULL.
10535	16	No	Cannot create plan guide '%.*ls' because a plan was not found in the plan cache that corresponds to the specified plan handle. Specify a cached plan handle. For a list of cached plan handles, query the sys.dm_exec_query_stats dynamic management view.
10536	16	No	Cannot create plan guide '%.*ls' because the batch or module corresponding to the specified @plan_handle contains more than 1000 eligible statements. Create a plan guide for each statement in the batch or module by specifying a statement_start_offset value for each statement.
10537	16	No	Cannot enable plan guide '%.*ls' because the enabled plan guide '%.*ls' contains the same scope and starting offset value of the statement. Disable the existing plan guide before enabling the specified plan guide.
10538	16	No	Cannot find the plan guide either because the specified plan guide ID is NULL or invalid, or you do not have permission on the object referenced by the plan guide. Verify that the plan guide ID is valid, the current session is set to the correct database context, and you have ALTER permission on the object referenced by the plan guide or ALTER DATABASE permission.
10539	16	No	Cannot create plan guide '%.*ls' from cache because a query plan is not available for the statement with start offset %d.This problem can occur if the statement depends on database objects that have not yet been created. Make sure that all necessary database objects exist, and execute the statement before creating the plan guide.
10601	16	No	Cannot specify included columns for a clustered index.
10602	16	No	Mixing old and new syntax in CREATE/ALTER/DROP INDEX statement is not allowed.
10603	16	No	Cannot rebuild clustered index '%.*ls' on view '%.*ls' because the view is dependent on base table '%.*ls' whose clustered index '%.*ls' is disabled.
10604	16	No	Cannot convert a statistic to an index using DROP_EXISTING index option when ONLINE index option is also specified.
10605	16	No	Cannot disable primary key index "%.*ls" on table "%.*ls" because the table is published for replication.
10606	16	No	Cannot disable the clustered index "%.*ls" on view "%.*ls" because the indexed view is published for replication.
10607	16	No	The clustered index '%.*ls' on table '%.*ls' cannot be disabled because the table has change tracking enabled. Disable change tracking on the table before disabling the clustered index.
10608	16	No	The index '%.*ls' on table '%.*ls' cannot be disabled because the table has change tracking enabled. Change tracking requires a primary key constraint on the table, and disabling the index will drop the constraint. Disable change tracking on the table before disabling the index.
10609	16	No	Filtered %S_MSG '%.*ls' cannot be created on table '%.*ls' because the column '%.*ls' in the filter expression is a computed column. Rewrite the filter expression so that it does not include this column.
10610	16	No	Filtered index '%.*ls' cannot be created on object '%.*ls' because it is not a user table. Filtered indexes are only supported on tables. If you are trying to create a filtered index on a view, consider creating an indexed view with the filter expression incorporated in the view definition.
10611	16	No	Filtered %S_MSG '%.*ls' cannot be created on table '%.*ls' because the column '%.*ls' in the filter expression is compared with a constant of higher data type precedence or of a different collation. Converting a column to the data type of a constant is not supported for filtered %S_MSG. To resolve this error, explicitly convert the constant to the same data type and collation as the column '%.*ls'.
10612	16	No	Filtered %S_MSG '%.*ls' cannot be created on table '%.*ls' because the column '%.*ls' in the filter expression is compared with a constant that cannot be converted to the data type of the column. Rewrite the filter expression so that it does not include this comparison.
10617	16	No	Index '%.*ls' could not be created or rebuilt. The key length for this index (%d bytes) exceeds the maximum allowed length of '%d' bytes when using the vardecimal storage format.
10618	16	No	Cannot %S_MSG filtered index '%.*ls' on table '%.*ls' because the statement sets the IGNORE_DUP_KEY option to ON. Rewrite the statement so that it does not use the IGNORE_DUP_KEY option.
10619	16	No	Filtered %S_MSG '%.*ls' cannot be created on table '%.*ls' because the column '%.*ls' in the filter expression is of a CLR data type. Rewrite the filter expression so that it does not include this column.
10620	16	No	Filtered %S_MSG '%.*ls' cannot be created on table '%.*ls' because the filter expression contains a comparison with a literal NULL value. Rewrite the comparison to use the IS [NOT] NULL comparison operator to test for NULL values.
10621	16	No	The index '%.*ls' on table '%.*ls' could not be created because the column '%.*ls' in the filter expression of the index is a column set.
10622	16	No	The %S_MSG '%.*ls' could not be created or rebuilt. A compressed index is not supported on table that contains sparse columns or a column set column.
10623	16	No	Filtered statistics '%.*ls' cannot be created on object '%.*ls' because it is not a user table. Filtered statistics are only supported on user tables.
10629	16	No	The data type specified for column '%.*ls' in table '%.*ls' cannot be used as a column in the distribution key of an index.
10633	16	No	Invalid online index creation operation
10634	10	Yes	An '%.*ls' statement was executed on object '%.*ls' by hostname '%.*ls', host process ID %d using the WAIT_AT_LOW_PRIORITY options with MAX_DURATION = %d and ABORT_AFTER_WAIT = BLOCKERS. Blocking user sessions will be killed after the max duration of waiting time.
10635	16	No	An online operation cannot be performed for '%.*ls' because the index contains column of large object type, and in the same transaction there are update operations before this online operation. Put the online operation outside the transaction or put it before any updates in the transaction.
10636	16	No	Ignore in Optimization cannot be set for '%.*ls' on '%.*ls.%.*ls' because it is only applicable to non-clustered B-tree or columnstore indexes.
10637	16	No	Cannot perform this operation on '%.*ls' with ID %I64d as one or more indexes are currently in resumable index rebuild state. Please refer to sys.index_resumable_operations for more details.
10638	16	No	ALTER INDEX '%S_MSG' failed. There is no pending resumable index operation for the index '%.*ls' on '%.*ls'.
10639	16	No	Resumable index operation for %S_MSG '%.*ls' failed because the index contains column '%.*ls' of type timestamp as a key column.
10640	16	No	Ignore in Optimization cannot be set for an index on '%.*ls.%.*ls' because it is only applicable to indexes on user defined disk-based tables.
10641	16	No	ALTER INDEX PAUSE failed. There is no actively running resumable index operation for the index '%.*ls' on '%.*ls'.
10642	16	No	SNAPSHOT_MATERIALIZATION cannot be set for index '%.*ls' on '%.*ls' because it is only applicable to indexes on views.
10643	16	No	SNAPSHOT_MATERIALIZATION cannot be set for '%.*ls' on '%.*ls' because it is only applicable to clustered indexes on views.
10644	16	No	Resumable index operation for %S_MSG '%.*ls' failed because the index contains the computed column '%.*ls' as a key or partitioning column. If this is a non clustered index, the column will be implicitly included as a key column if it is part of the clustered index key.
10645	10	No	Warning: An existing resumable operation with the same options was identified for the same index on '%.*ls'. The existing operation will be resumed instead.
10646	16	No	Index '%.*ls' on view '%.*ls' that has SNAPSHOT_MATERIALIZATION cannot be dropped using the DROP_EXISTING option.
10647	16	No	Index '%.*ls' on '%.*ls' that has SNAPSHOT_MATERIALIZATION cannot be altered.
10648	16	No	SNAPSHOT_MATERIALIZATION cannot be set for partitioned index '%.*ls' on '%.*ls'.
10649	16	No	Nonclustered index '%.*ls' cannot be created on '%.*ls' that has clustered index '%.*ls' with SNAPSHOT_MATERIALIZATION.
10650	16	No	Refresh of snapshot view(s) requires snapshot isolation to be enabled on the database.
10651	16	No	Refresh of snapshot view failed because view '%.*ls.%.*ls' does not exist.
10652	16	No	Refresh of snapshot view failed because '%.*ls.%.*ls' is not a snapshot view.
10653	16	No	Refresh of snapshot view failed.
10654	16	No	Refresh of snapshot view failed because lock could not be obtained on the database.
10655	16	No	Refresh of snapshot view failed because view is not specified in two-part name format.
10656	10	Yes	The resumable index operation for index '%.*ls' on object '%.*ls' was paused.
10657	10	No	The resumable index '%.*ls' on object '%.*ls' has been paused for '%.2f' hours.
10658	16	No	Stored procedure '%ls' is currently disabled.
10659	10	Yes	An ALTER INDEX '%S_MSG' was executed for index '%.*ls' on object '%.*ls' by hostname '%.*ls'.
10660	13	Yes	The online index build operation was chosen as a deadlock victim over 500 times while attempting to process a single row. Resolve the blocking concurrent operation, and rerun the query.
10661	10	Yes	The refresh operation for all snapshot views failed because there was another refresh operation (either for all or a single snapshot view) in progress.
10662	10	Yes	The refresh operation for snapshot view '%.*ls' failed because another refresh operation for the same snapshot view was already in progress.
10663	10	Yes	The refresh operation for snapshot view '%.*ls' failed because refresh operation for all snapshot views was already in progress.
10664	16	No	Cannot specify included columns for indexes on memory optimized tables.
10665	15	No	'%.*ls' with DROP_EXISTING option is not supported with %S_MSG option.
10666	16	Yes	Cannot resume index build as required DOP %d (DOP operation was started with) is not available. Please ensure sufficient DOP is available or abort existing index operation and try again.
10667	10	No	Warning: Create Index was started with MAXDOP %d. The operation will resume with MAXDOP value %d.
10668	16	No	The %S_MSG option is not supported for creating an index on a heap.
10669	16	No	The %S_MSG option is not supported for creating a nonclustered index on clustered columnstore index.
10670	16	No	Resumable index creation for %S_MSG '%.*ls' failed because the index includes a large object column '%.*ls'.
10671	16	No	The %S_MSG option is not supported for creating a filtered index.
10672	16	No	The %S_MSG option is not supported for creating a clustered index on a relation that has a filtered index.
10673	16	No	Cannot resume index creation due to incorrect persisted state found. Please ABORT the operation and try again.
10674	16	No	The %S_MSG option is not supported for creating a clustered index on a table containing nonclustered columnstore index.
10675	16	No	Internal Query Processor Error: The query processor could not produce a query plan. The RESUMABLE option is not supported for this index build. Remove the RESUMABLE option and rerun the statement.
10676	10	No	The resumable index '%.*ls' on object '%.*ls' is being auto aborted because it has remained paused for more than %d minutes. Refer to the PAUSED_RESUMABLE_INDEX_ABORT_DURATION_MINUTES DATABASE SCOPED CONFIGURATION option for configuring the threshold for automatically aborting paused index operations.
10677	10	No	The index '%.*ls' on object '%.*ls' was rebuilt with valid data rows but null stats were found.
10678	16	No	Could not create columnstore index '%.*ls' on table '%.*ls' since column '%.*ls' is computed column which is not supported in the ORDER list.
10679	16	No	Online columnstore index is not supported with ORDER clause.
10680	16	No	ALTER INDEX ALL '%S_MSG' failed. There is no pending resumable index operation on '%.*ls'.
10681	16	No	Cannot create a row of size %d which is greater than the allowable maximum row size of %d. Abort and retry the operation by specifying the RESUMABLE = OFF option.
10700	16	No	The table-valued parameter "%.*ls" is READONLY and cannot be modified.
10701	15	No	The READONLY option cannot be used in an EXECUTE or CREATE AGGREGATE statement.
10702	15	No	The WITH CUBE and WITH ROLLUP options are not permitted with a ROLLUP, CUBE, or GROUPING SETS specification.
10703	15	No	Too many grouping sets. The maximum number is %d.
10704	15	No	To rethrow an error, a THROW statement must be used inside a CATCH block. Insert the THROW statement inside a CATCH block, or add error parameters to the THROW statement.
10705	15	No	Subqueries are not allowed in the OUTPUT clause.
10706	15	No	Too many expressions are specified in the GROUP BY clause. The maximum number is %d when grouping sets are supplied.
10707	15	No	The CUBE() and ROLLUP() grouping constructs are not allowed in the current compatibility mode. They are only allowed in 100 mode or higher.
10708	15	No	DEFAULT is not allowed on the right hand side of "%.*ls"
10709	15	No	The number of columns for each row in a table value constructor must be the same.
10710	15	No	An action of type '%S_MSG' is not allowed in the 'WHEN NOT MATCHED' clause of a MERGE statement.
10711	15	No	An action of type 'INSERT' is not allowed in the '%S_MSG' clause of a MERGE statement.
10712	15	No	The pseudocolumn '%.*ls' cannot be part of an index or used as partitioning column.
10713	15	No	A MERGE statement must be terminated by a semi-colon (;).
10714	15	No	An action of type '%S_MSG' cannot appear more than once in a '%S_MSG' clause of a MERGE statement.
10715	15	No	'%.*ls' is not a valid hint.
10716	15	No	A nested INSERT, UPDATE, DELETE, or MERGE statement must have an OUTPUT clause.
10717	15	No	The %S_MSG clause is not allowed when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
10718	15	No	Query hints are not allowed in nested INSERT, UPDATE, DELETE, or MERGE statements.
10719	16	No	Foreign key relationships from a memory optimized table with DURABILITY set to SCHEMA_AND_DATA to a memory optimized table with DURABILITY set to SCHEMA_ONLY are not supported.
10720	15	No	An OUTPUT INTO clause is not allowed in a nested INSERT, UPDATE, DELETE, or MERGE statement.
10721	15	No	The WHERE CURRENT OF clause is not allowed in a nested INSERT, UPDATE, DELETE, or MERGE statement.
10722	15	No	The DISTINCT keyword is not allowed when the FROM clause contains a nested INSERT, UPDATE, DELETE, or MERGE statement.
10723	15	No	In a MERGE statement, a variable cannot be set to a column and expression in the same assignment in the SET clause of an UPDATE action. Assignments of the form 'SET @variable = column = expression' are not valid in the SET clause of an UPDATE action in a MERGE statement. Modify the SET clause to only specify assignments of the form 'SET @variable = column' or 'SET @variable = expression'.
10724	15	No	The FORCESEEK hint is not allowed for target tables of INSERT, UPDATE, or DELETE statements.
10725	15	No	Cannot use the VARYING option in a DECLARE, CREATE AGGREGATE or CREATE FUNCTION statement.
10726	15	No	User defined aggregates do not support default parameters.
10727	15	No	A nested INSERT, UPDATE, DELETE, or MERGE statement is not allowed on either side of a JOIN or APPLY operator.
10728	15	No	A nested INSERT, UPDATE, DELETE, or MERGE statement is not allowed as the table source of a PIVOT or UNPIVOT operator.
10729	15	No	A nested INSERT, UPDATE, DELETE, or MERGE statement is not allowed in a SELECT statement that is not the immediate source of rows for an INSERT statement.
10730	15	No	A nested INSERT, UPDATE, DELETE, or MERGE statement is not allowed in the FROM clause of an UPDATE or DELETE statement.
10731	15	No	A nested INSERT, UPDATE, DELETE, or MERGE statement is not allowed inside another nested INSERT, UPDATE, DELETE, or MERGE statement.
10732	15	No	A nested INSERT, UPDATE, DELETE, or MERGE statement is not allowed on either side of a UNION, INTERSECT, or EXCEPT operator.
10733	15	No	A nested INSERT, UPDATE, DELETE, or MERGE statement is not allowed in the USING clause of a MERGE statement.
10734	16	No	Variable assignment is not allowed in a statement containing a top level UNION, INTERSECT or EXCEPT operator.
10735	15	No	Incorrect WHERE clause for filtered %S_MSG '%.*ls' on table '%.*ls'.
10736	15	No	A full-text stoplist statement must be terminated by a semi-colon (;).
10737	15	No	In an ALTER TABLE REBUILD or ALTER INDEX REBUILD statement, when a partition is specified in a DATA_COMPRESSION clause, PARTITION=ALL must be specified. The PARTITION=ALL clause is used to reinforce that all partitions of the table or index will be rebuilt, even if only a subset is specified in the DATA_COMPRESSION clause.
10738	15	No	The number of row value expressions in the INSERT statement exceeds the maximum allowed number of %d row values.
10739	15	No	The insert column list used in the MERGE statement cannot contain multi-part identifiers. Use single part identifiers instead.
10740	15	No	A search property list statement must end with a semicolon (;).
10741	15	No	A TOP can not be used in the same query or sub-query as a OFFSET.
10742	15	No	The offset specified in a OFFSET clause may not be negative.
10743	15	No	The number of rows provided for a OFFSET clause must be an integer.
10744	15	No	The number of rows provided for a FETCH clause must be greater then zero.
10745	15	No	The FORCESCAN hint is not allowed for target tables of INSERT, UPDATE, or DELETE statements.
10746	15	No	The FORCESCAN hint is specified simultaneously with the FORCESEEK hint. Remove one of the hints and resubmit the query.
10747	15	No	The parameterized FORCESEEK hint cannot be simultaneously used with INDEX hints or a non-parameterized FORCESEEK hint on the same object. Use either INDEX hints and a non-parameterized FORCESEEK hint or use a parameterized FORCESEEK hint without INDEX hints for each table or view.
10748	15	No	There are multiple FORCESEEK hints specified on the same table or view. Remove the extra FORCESEEK hints and resubmit the query.
10749	15	No	The FORCESEEK hint cannot be used with index 0. Correct the index provided to the FORCESEEK hint and resubmit the query.
10750	15	No	The FORCESCAN hint cannot be used with more than one INDEX hint. Remove the extra INDEX hints and resubmit the query.
10751	15	No	The ORDER BY in WITHIN GROUP clause of '%.*ls' function must have exactly one expression.
10752	15	No	The function '%.*ls' may not have a window frame.
10753	15	No	The function '%.*ls' must have an OVER clause.
10754	15	No	The function '%.*ls' must have a WITHIN GROUP clause.
10755	15	No	The function '%.*ls' takes between %d and %d arguments.
10756	15	No	Window frame with ROWS or RANGE must have an ORDER BY clause.
10757	15	No	The function '%.*ls' may not have a WITHIN GROUP clause.
10758	15	No	The function '%.*ls' may not have ORDER BY in OVER clause.
10759	15	No	Use of DISTINCT is not allowed with the OVER clause.
10760	16	No	Scale argument is not valid. Valid expressions for data type %ls scale argument are integer constants and integer constant expressions.
10761	16	No	Invalid data type %.*ls in function %.*ls.
10762	16	No	The %.*ls function is not allowed in the current compatibility mode. It is only allowed in 110 mode or higher.
10763	15	No	GROUP BY clause can only contain one query hint. Remove the extra hints and re-run the query.
10764	15	No	Number of grouping columns in the query exceeded maximum number allowed. SQL Server allows 64k grouping columns. Reduce number of grouping columns and re-run the query.
10765	15	No	DISTRIBUTED_AGG and CENTRAL_AGG hints cannot be used with a CUBE or ROLLUP clause. Modify the query and re-run it.
10766	15	No	CENTRAL_AGG must be specified after all columns in the GROUP BY clause. Modify the query and re-run it.
10767	15	No	DISTRIBUTED_AGG hint cannot be used when the GROUP BY clause contains the same column more than once. Modify the query and re-run it.
10768	15	No	LABEL hint can only be used one time in the query. Modify the query and re-run it.
10769	15	No	SET options are not supported inside ATOMIC blocks.
10770	15	No	The SERVER option and one of CREDENTIAL or FEDERATED_SERVICE_ACCOUNT = ON options are required for setting REMOTE_DATA_ARCHIVE on a database.
10771	15	No	The CREDENTIAL option cannot be used with the FEDERATED_SERVICE_ACCOUNT = ON option.
10772	15	No	There are multiple REMOTE_DATA_ARCHIVE_OVERRIDE hints specified on the same table or view reference. Remove the extra REMOTE_DATA_ARCHIVE_OVERRIDE hint(s) and resubmit the query.
10773	15	No	The REMOTE_DATA_ARCHIVE_OVERRIDE hint is not applicable to object '%.*ls' because it is not a table with REMOTE_DATA_ARCHIVE enabled. Remove the REMOTE_DATA_ARCHIVE_OVERRIDE hint and resubmit the statement.
10774	15	No	Incorrect WHERE clause for filtered index.
10775	16	No	Object '%.*ls' is not a memory optimized table or a natively compiled inline table-valued function and cannot be accessed from a natively compiled module.
10776	16	No	Triggers on non-memory optimized tables cannot use WITH NATIVE_COMPILATION.
10777	16	No	Triggers on memory-optimized tables must use WITH NATIVE_COMPILATION.
10778	16	No	Foreign key relationships between memory optimized tables and non-memory optimized tables are not supported.
10779	16	No	The durability option 'schema_only' is supported only with memory optimized tables.
10780	16	No	There is no primary key in the referenced table '%.*ls' that matches the referencing column list in the foreign key '%.*ls'. Foreign keys in memory-optimized tables must reference primary keys.
10781	16	No	Querytraceon %d and optimizer hint '%.*ls' specify conflicting behaviors. Remove one of them and rerun the query.
10782	16	No	BEGIN ATOMIC is supported only in natively compiled modules.
10783	16	No	The body of a natively compiled module must be an ATOMIC block.
10784	16	No	The WITH clause of BEGIN ATOMIC statement must specify a value for the option '%ls'.
10785	15	No	The %S_MSG '%ls' is supported only with %S_MSG.
10786	16	No	The ALTER AVAILABILITY GROUP command failed because it contained multiple MODIFY REPLICA options: %ls. Enter a separate ALTER AVAILABILITY GROUP ... MODIFY REPLICA command for each replica option that you want to modify.
10787	16	No	The REPEATABLEREAD and SERIALIZABLE hints are not permitted on Hekaton tables with columnstore indexes.
10788	15	No	The option '%ls' is not supported with table types.
10789	15	No	The option '%ls' must be specified for index '%.*ls' on table '%.*ls'. It is required for hash indexes.
10790	15	No	The option '%ls' can be specified only for hash indexes.
10791	15	No	Hash indexes are permitted only in memory optimized tables.
10792	15	No	When used in a natively compiled module, the function '%.*ls' cannot appear outside of a catch block.
10793	16	No	Both an index and a PRIMARY KEY constraint have been defined inline, with the definition of column '%.*ls', table '%.*ls'. Defining both an index and a PRIMARY KEY constraint inline with the column definition is not allowed.
10794	15	No	The %S_MSG '%ls' is not supported with %S_MSG.
10795	15	No	The variable '%.*ls' was declared as not null, and must be declared with an initial value.
10796	15	No	The SCHEMABINDING option is supported only for natively compiled modules, and is required for those modules.
10797	15	No	Only one MEMORY_OPTIMIZED_DATA filegroup is allowed per database.
10798	16	No	This is not a valid data compression setting for this object. It can only be used with columnstore indexes. Please choose NONE, PAGE, or ROW compression.
10799	16	No	This is not a valid data compression setting for a columnstore index. Please choose COLUMNSTORE or COLUMNSTORE_ARCHIVE compression.
10800	16	No	The listener for the WSFC resource '%.*ls' failed to start, and returned error code %d, '%.*ls'. For more information about this error code, see "System Error Codes" in the Windows Development Documentation.
10801	16	No	Failed to stop the listener for Windows Failover Cluster resource '%.*ls'. Error: %d. %.*ls
10802	10	No	Failed to enqueue a task to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is added manually or SQL Server is restarted. SQLOS error code: %d.
10900	16	No	Failed to configure resource governor during startup. Check SQL Server error log for specific error messages or check the consistency of master database by running DBCC CHECKCATALOG('master').
10901	16	No	User does not have permission to alter the resource governor configuration.
10902	16	No	User-defined function '%s' does not exist in master database, or the user does not have permission to access it.
10903	16	No	The specified schema name '%.*ls' for classifier user-defined function either does not exist, or the user does not have permission to use it.
10904	16	No	Resource governor configuration failed. There are active sessions in workload groups being dropped or moved to different resource pools. Disconnect all active sessions in the affected workload groups and try again.
10905	16	No	Could not complete resource governor configuration because there is not enough memory. Reduce the server load or try the operation on a dedicated administrator connection.
10906	16	No	The object '%.*ls'.'%.*ls' is not a valid resource governor classifier user-defined function. A valid classifier user-defined function must be schema-bound, return sysname, and have no parameters.
10907	16	No	Attribute '%.*ls' with value of %u is greater than attribute '%.*ls' with value of %u.
10908	16	No	Attribute '%.*ls' with value of %u is less than attribute '%.*ls' with value of %u.
10909	16	No	The resource pool cannot be created. The maximum number of resource pools cannot exceed current limit of %u including predefined resource pools.
10910	16	No	The operation could not be completed. The specified '%.*ls' value, %u, causes the sum of minimums on all resource pools on scheduler %u to exceed 100 percent. Reduce the value for one or more pools, or change pool affinity, so that the sum is less than or equal to 100.
10911	16	No	Requested operation cannot be performed because the resource pool '%.*ls' does not exist.
10912	16	No	The operation could not be completed. Dropping predefined %S_MSG is not allowed.
10913	16	No	Users are not allowed to %S_MSG the workload group '%.*ls' in the '%.*ls' resource pool.
10914	16	No	The name of the %S_MSG '%.*ls' cannot begin with # of ##.
10915	16	No	The operation could not be completed. Altering '%.*ls' %S_MSG is not allowed.
10916	16	No	Cannot drop resource pool '%.*ls' because it contains workload group '%.*ls'. Drop or remove all workload groups using this resource pool before dropping it.
10917	16	No	ALTER WORKLOAD GROUP failed. Either a 'WITH' or 'USING' clause must be specified.
10918	16	No	Cannot create %S_MSG '%.*ls' because it already exists.
10919	16	No	An error occurred while reading the resource governor configuration from master database. Check the integrity of master database or contact the system administrator.
10920	16	No	Cannot %S_MSG user-defined function '%.*ls'. It is being used as a resource governor classifier.
10921	16	No	The '%.*ls' %S_MSG cannot be moved out of '%.*ls' %S_MSG.
10922	16	No	%ls failed. Rerun the statement.
10923	16	No	%ls failed. The resource governor is not available in this edition of SQL Server. You can manipulate resource governor metadata but you will not be able to apply resource governor configuration. Only Enterprise edition of SQL Server supports resource governor.
10924	16	No	The pool affinity range is invalid. The lower bound %d must be less than the upper bound %d.
10925	16	No	A %S_MSG value was specified more than one time in the pool affinity range list.
10926	16	No	The %S_MSG range that specifies %S_MSG %d includes at least one %S_MSG that is not available to the current instance. The maximum %S_MSG number that is available to this instance is %d.
10927	16	No	The operation could not be completed. The specified '%.*ls' value, %u, causes the sum of minimums on all workload groups using resource pool '%.*ls' to exceed 100 percent. Reduce the value or modify other workload groups so that the sum is less than or equal to 100.
10928	16	No	Resource ID : %d. The %ls limit for the database is %d and has been reached. See 'https://learn.microsoft.com/azure/azure-sql/database/resource-limits-logical-server' for assistance.
10929	16	No	Resource ID : %d. The %ls minimum guarantee is %d, maximum limit is %d and the current usage for the database is %d. However, the server is currently too busy to support %ls greater than %d for this database. See 'https://learn.microsoft.com/azure/azure-sql/database/resource-limits-logical-server' for assistance. Otherwise, please try again later.
10930	16	No	The service is currently too busy. Please try again later.
10931	16	No	Cannot drop resource pool '%.*ls' because it is bound to a database. Remove all bindings to this resource pool before dropping it.
10932	16	No	Resource governor configuration failed, because there is an active database in the resource pool being dropped. Take the database offline and try again.
10933	16	No	A %S_MSG with id %d does not exist on this system. Use sys.dm_os_schedulers to locate valid %S_MSGs for this system.
10934	16	No	Requested operation cannot be performed because the external resource pool '%.*ls' does not exist.
10935	16	No	External resource pool does not allow more than one processor group.
10936	16	No	Resource ID : %d. The %ls limit for the elastic pool is %d and has been reached. See 'https://learn.microsoft.com/azure/azure-sql/database/resource-limits-logical-server' for assistance.
10937	16	No	Default workload group does not allow to alter attribute '%.*ls'.
10961	16	No	The request has been aborted because its CPU usage exceeds the maximum configured limit for the workload group.
10981	10	No	Resource governor reconfiguration succeeded.
10982	16	Yes	Failed to run resource governor classifier user-defined function '%.*ls'. Last error %u, state %u. See previous errors in SQL Server error log from session ID %ld for details. Classifier elapsed time: %I64u ms.
10983	16	No	Resource governor '%ls' operation was canceled by user.
10984	16	No	Resource governor reconfiguration failed.
10985	10	No	Resource governor reconfiguration encountered an issue (HRESULT code : 0x%lx, reason: %ls), while sending active external resource pool ids to launchpad. This will not fail reconfigure.
10986	10	No	Load resource governor configuration from replicated master failed to complete.
10987	10	No	Load resource governor configuration from replicated master failed to start. Unable to submit async task.

Related content

• Database Engine events and errors
• Understanding Database Engine errors
• Cause and resolution of Database Engine errors