Freigeben über


Real World Parallel INSERT...SELECT: What else you need to know!

Arvind Shyamsundar

Reviewed by: Gjorgji Gjeorgjievski, Sunil Agarwal, Vassilis Papadimos, Denzil Ribeiro, Mike Weiner, Mike Ruthruff, Murshed Zaman, Joe Sack

In a previous post we have introduced you to the parallel INSERT operator in SQL Server 2016. In general, the parallel insert functionality has proven to be a really useful tool for ETL / data loading workloads. As an outcome of various SQLCAT engagements with customers, we learnt about some nuances when using this feature. As promised previously, here are those considerations and tips to keep in mind when using parallel INSERT...SELECT in the real world. For convenience we have demonstrated these with simple examples!

Level Set

To start with, our baseline timing for the test query which used serial INSERT (see Appendix for details) is 225 seconds. The query inserts 22,537,877 rows into a heap table, for a total dataset size of 3.35GB. The execution plan in this case is shown below, as you can see both the FROM portion and the INSERT portion are serial.

clip_image002

With Parallel INSERT

As mentioned in our previous post, we currently require that you use a TABLOCK hint on the target of the INSERT (again this is the same heap table as shown above) to leverage the parallel INSERT behavior. If we do this, you will see the dramatic difference with the query taking 14 seconds. The execution plan is as below:

clip_image004

Have Additional Indexes? Watch out!

For row store targets, it is important to note that the presence of a clustered index or any additional non-clustered indexes on the target table will disable the parallel INSERT behavior. For example, here is the query plan on the same table with an additional non-clustered index present. The same query takes 287 seconds without a TABLOCK hint and the execution plan is as follows:

clip_image006

When TABLOCK is specified for the target table, the query completes in 286 seconds and the query plan is as follows (there is still no parallelism for the insert – this is the key thing to remember.)

clip_image008

Also, please refer to The Data Loading Performance Guidewhich has more considerations on ‘Bulk Loading with Indexes in Place’.

Watch out when IDENTITY or SEQUENCE is present!

It is quite common to find IDENTITY columns being used as the target table for INSERT…SELECT statements. In those cases, the identity column is typically used to provide a surrogate key. However, IDENTITY will disable parallel INSERT, as you can see from the example below. Let’s modify the table to have an identity column defined:

 CREATE TABLE DB1BCoupon_New(
[IdentityKey] bigint NOT NULL IDENTITY(1,1),
[ItinID] [bigint] NULL,
[Coupons] [smallint] NULL,
[Year] [smallint] NULL,
[Quarter] [smallint] NULL,

… (table definition is truncated for readability). When we run the below INSERT query:

 INSERT tempdb.[dbo].[DB1BCoupon_New] WITH (TABLOCK)
(ItinID, Coupons, ... Gateway, CouponGeoType)
SELECT ItinID, Coupons, ... Gateway, CouponGeoType
FROM DB1b.dbo.DB1BCoupon_Rowstore AS R
WHERE Year = 1993 
OPTION (MAXDOP 8);

We see that the parallel insert is disabled (query plan below). The query itself completes in 104 seconds, which is a great improvement, but that is primarily because of the minimal logging. As an aside, the highlighted Compute Scalar below is because of the identity value calculation.

clip_image010

It is important to know that if there is an IDENTITY column in the target table or if a SEQUENCE object is referenced in the query, the plan will be serial. To work around this limitation, consider using a ROW_NUMBER() function as shown below. Do note that in this case, you can either leverage IDENTITY_INSERT (which has its own considerations), or declare the column in the table without the IDENTITY property. For this demo, I set IDENTITY_INSERT ON:

 SET IDENTITY_INSERT [dbo].[DB1BCoupon_New] ON

Here is the abridged version of this query:

 INSERT tempdb.[dbo].[DB1BCoupon_New] with (TABLOCK)
(IdentityKey, ItinID, Coupons, ..., CouponType, TkCarrier,
OpCarrier, FareClass, Gateway, CouponGeoType)
SELECT ROW_NUMBER() OVER (ORDER BY (SELECT NULL)) AS IdentityKey,
ItinID, Coupons, ..., CouponType, TkCarrier,
OpCarrier, FareClass, Gateway, CouponGeoType
FROM DB1b.dbo.DB1BCoupon_Rowstore AS R
WHERE Year = 1993 
OPTION (MAXDOP 8);

It turns out that this re-write of the query actually performs worse than the serial INSERT with the identity being generated. This re-write with the window function took 161 seconds in our testing. And as you can see from the plan below, the main challenge here seems to be that the source data is being read in serial.

clip_image012

This looks disappointing, but there is hope! Read on…

Batch Mode Window Aggregate to the rescue

In the test setup, we also had created a clustered ColumnStore (CCI) version of the source table. When the test query is modified to read from the CCI instead of the rowstore version (with the above re-write for identity value generation), the query runs in 12 seconds! The main difference between this and the previous case is the parallelism in the data read, and the parallel window function which is new to SQL 2016. And the Columnstore scan does run in Batch mode.

clip_image014

Here is the drilldown into the Window Aggregate. As you can see in the ‘Actual Execution Mode’ attribute, it is running in Batch mode. And it uses parallelism with 8 threads. For more information on batch mode Window Aggregate, one of the best references is Itzik Ben-Gan’s two part series: Part 1 and Part 2.

clip_image016

Parallel INSERT and Clustered Columnstore Indexes

When the target table is a clustered Columnstore index, it is interesting to note the ‘row group quality’ (how ‘full’ are the compressed row groups) after the insert. To test this, I re-created the target table with a clustered Columnstore index (CCI) defined on it. The table started as empty, and the INSERT statement was issued with a TABLOCK hint. The insert took 77 seconds (this is somewhat expected due to the compression required for the CCI) and the query plan is shown below:

clip_image018

The compute scalar operator above is purely because of the partition scheme applied. Now, let’s look at the Columnstore row groups created, by using the DMV query below:

 select partition_number, row_group_id, state_desc, transition_to_compressed_state_desc, trim_reason_desc, total_rows, size_in_bytes, created_time
from sys.dm_db_column_store_row_group_physical_stats
order by created_time desc

Here is the result:

clip_image020

The important thing to note for this parallel insert case is that multiple row groups are created and inserted into concurrently, each by one of the CCI insert threads. If we compare this to a case where parallel insert is not used, you will see differing timestamps for the various segments, which is an indirect way of telling that the insert was serial in that case. For example, if I repeat this test without TABLOCK on the destination table, then the query takes 418 seconds. Here is the query plan:

clip_image022

Let’s review briefly the row groups created in this case. We will use these results to discuss ‘row group quality’ in the next section. Here is the output from the row group DMV for the serial INSERT case:

clip_image024

Row group / segment quality and parallelism

The point of the previous two examples above is that in general, the parallel INSERT operation prefers throughput as opposed to segment (a.k.a. row group) quality. In some cases, if row group quality (having as ‘full’ a row group / having close to a million rows each) is important, then you may need to carefully adjust the degree of parallelism. For example:

  • Let’s say we use parallel insert to insert 10 million rows
  • Let’s also imagine a hypothetical degree of parallelism as 100
  • In that case, we end up with most row groups with around 100,000 rows each. This may not be ideal for some workloads. For an in-depth discussion on segment / row group quality, please see this article.

Therefore, it is critical to adjust the degree of parallelism to balance throughput and row group quality.

Degree of parallelism and INSERT Throughput

Now, back to the heap, let’s see the effect of varying the degree of parallelism (DoP). Any allocation bottlenecks (primarily the number of data files and the I/O bandwidth) are the main constraint when it comes to increasing throughput with parallel INSERT. To overcome these, in our test setup, we have 480 data files for TEMPDB. This may sound excessive, but then we were testing on a 240 processor system! And this configuration was critical for testing parallel insert ‘at-scale’ as you will see in the next section.

For now, here are the test results with varying the DoP. For all cases, TABLOCK was used on the target table. In each case the INSERT query was the only major query running on the system. The chart and table below show the time taken to insert 22,537,877 rows into the heap, along with the Log I/O generated.

MaxDop2

Here’s the raw data in case you prefer to see numbers:

Degree of parallelism Time taken in seconds Log I/O KB/sec
1 95 122
2 53 225
4 27 430
8 14 860
15 7 1596
16 7 1597
24 6 1781
30 6 2000
32 7 1200
48 10 1105
64 13 798
128 26 370
240 14 921

What can we conclude here? The ‘sweet spot’ seems to be the number 15, which (not coincidentally) is the number of cores per physical CPU in the test setup. Once we cross NUMA node boundaries, the costs of cross-node memory latency are steep – more details on this in the next section. An important note here is that your mileage will vary depending on the specific system configuration. Please ensure adequate tests are done in the specific environment before concluding on an optimal value for DoP.

Pushing things to the max: concurrent parallel INSERTs

Next, we decided to stress the system with multiple such parallel INSERT statements running. To do this optimally we used the RML utilities and created a simple SQL script which would each create a #temp table, parallel insert into it and then drop the table. The results are impressive, we are able to max out the system on the CPU front in some cases (given that these operations are minimally logged and in TEMPDB, there is no other major bottleneck.)

clip_image028

Here are the test results with various combinations of MAXDOP and concurrent requests into temporary tables. The MAXDOP 15 value seems to be the most efficient in this case because that way, each request lines up nicely with the NUMA node boundaries (each NUMA node in the system has 30 logical CPUs.) Do note that the values of MAXDOP and the number of connections were chosen to keep 240 threads totally active in the system.

MAXDOP Number of connections Total rows inserted End to end test timing seconds Effective rows / second CPU% Log I/O KB / sec
5 48 1,081,818,096 50 21,636,362 100 15850
8 30 676,136,310 33 20,488,979 90 15300
15 16 360,606,032 14 25,757,573 100 15200
30 8 180,303,016 11 16,391,183 75 13100

Transaction Logging

When we used the TABLOCK hint in the previous tests on heap tables, we also ended up leveraging another important optimization which has been around for a while now: minimal logging. When we monitor the amount of log space utilized in these cases, you will see a substantially lower amount of log space used in the case where TABLOCK is specified for the (heap) target table. Do note that for Columnstore indexes, minimal logging depends on the size of the insert batch, as is described by Sunil Agarwal in his blog post. Here’s a chart which compares these cases (Note: the graph below has a logarithmic scale for the vertical axis to efficiently accommodate the huge range of values!)

MinLogging

Given below is the raw data for the above chart:

Log space used in TEMPDB With TABLOCK Without TABLOCK (bytes)
Insert into heap 11,273,052 1,832,179,840
Insert into CCI 4,932,964 3,477,720

In the case of the CCI insert, the amount of transaction logging is very comparable. However, the insert into heap still requires a TABLOCK for minimal logging as is clearly evident in the large amount of transaction logging when TABLOCK is not specified.

Special case for temporary tables

[Update 16 Nov 2016: SQL Server 2016 SP1 reverts the behavior for inserts into local temporary tables to be the same as normal tables. For the record, the previous behavior (struck out below) for local temporary tables is only applicable to builds prior to SQL 2016 SP1. The KB article has also been updated to reflect the changes in SP1.

In the previous post, we mentioned that one of the key requirements for the INSERT operation to be parallel is to have a TABLOCK hint specified on the target table. This requirement is to ensure consistency by blocking any other insert / update operations. Now when it comes to ‘local’ temporary tables (the ones which have a single # prefix), it is implicit that the current session has exclusive access to the local temporary table. In turn, this satisfies the condition that otherwise needed a TABLOCK to achieve. Hence, if the target table for the INSERT is a ‘local’ temporary table, the optimizer will consider parallelizing the INSERT in case the costs are suitably high. In most cases, this will result in a positive effect on performance but if you observe PFS resource contention caused by this parallel insert, you can consider one of the following workarounds:

  • Create an index on the temporary table.  The described issue only occurs with temporary table heaps.
  • Use the MAXDOP 1 query hint for the problematic INSERT…SELECT operations.

[Update 23 Aug 2016: For the rare cases where parallel insert may cause excessive PFS contention, there is a way to disable parallel INSERT to isolate the issue; see this KB article for details.]

Fine Print

A few additional points to consider when leveraging this exciting new capability are listed below. We would love your feedback (please use the Comments section below) on if any of the items below are blocking you in any way in your specific workloads.

  • Just as it is with SQL Server 2016, in order to utilize the parallel insert in Azure SQL DB, do ensure that your compatibility level is set to 130. In addition, it is recommended to use a suitable SKU from the Premium service tier to ensure that the I/O and CPU requirements of parallel insert are satisfied.
  • The usage of any scalar UDFs in the SELECT query will prevent the usage of parallelism. While usage of non-inlined UDFs are in general ‘considered harmful’ they end up actually ‘blocking’ usage of this new feature.
  • Presence of triggers on the target table and / or indexed views which reference this table will prevent parallel insert.
  • If the SET ROWCOUNT clause is enabled for the session, then we cannot use parallel insert.
  • If the OUTPUT clause is specified in the INSERT…SELECT statement to return results to the client, then parallel plans are disabled in general, including INSERTs. If the OUTPUT…INTO clause is specified to insert into another table, then parallelism is used for the primary table, and not used for the target of the OUTPUT…INTO clause.

Summary

Whew! We covered a lot here, so here’s a quick recap:

  • Parallel INSERT is used only when inserting into a heap without any additional non-clustered indexes. It is also used when inserting into a Columnstore index.
  • If the target table has an IDENTITY column present then you need to work around appropriately to leverage parallel INSERT.
  • Choose your degree of parallelism carefully – it impacts throughput. Also, in the case of Columnstore it impacts the quality of the row groups created.
  • To maximize the impact and benefits of the parallel INSERT operation, the system should be configured appropriately (no I/O bottlenecks, sufficient number of data files).
  • Be aware of the power and benefit of minimal logging – something you get for free when parallel INSERT is used in databases with the simple recovery model.
  • Be aware of the fact that large INSERTs into local temporary tables are candidates for parallel insert by default.

We hope you enjoyed this post, and if you did, we’d love to hear your comments! If you have questions as well please do not hesitate to ask!

Appendix: Test Setup

For the tests in this post, we are using the Airline Origin and Destination Survey (DB1B) Coupon dataset. There are large number of rows in that table (we tested with one slice, for the year 1993) and this being a real-world dataset, it is quite representative of many applications. The destination table schema is identical to the source table schema. The test query is a very simple INSERT…SELECT of the form:

 INSERT tempdb.[dbo].[DB1BCoupon_New]
(ItinID, Coupons, ..., Gateway, CouponGeoType)
SELECT ItinID, Coupons, ..., Gateway, CouponGeoType
FROM DB1b.dbo.DB1BCoupon_Rowstore AS R
WHERE Year = 1993 
OPTION (MAXDOP 8);

The use of the MAXDOP query hint is so that we can test with differing parallelism levels. The tests were performed on a SQL Server 2016 instance running on Windows Server 2012 R2. The storage used was high-performance local PCIe storage cards. SQL Server was configured to use large pages (-T834) and was set to a maximum of 3.7TB of RAM.

Appendix: Table schemas

Here's the definition for the partition function:

 CREATE PARTITION FUNCTION [pfn_ontime](smallint) AS RANGE RIGHT FOR VALUES (1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016)

Here's the definition for the partition scheme used:

 CREATE PARTITION SCHEME [ps_ontime] AS PARTITION [pfn_ontime] ALL TO ([PRIMARY])

Here's the definition for the table used:

 CREATE TABLE [dbo].[DB1BCoupon_Rowstore](
[ItinID] [bigint] NULL,
[Coupons] [smallint] NULL,
[Year] [smallint] NULL,
[Quarter] [smallint] NULL,
[Origin] [varchar](4) NULL,
[OriginAirportID] [smallint] NULL,
[OriginAirportSeqID] [int] NULL,
[OriginCityMarketID] [int] NULL,
[OriginCountry] [varchar](3) NULL,
[OriginStateFips] [smallint] NULL,
[OriginState] [varchar](3) NULL,
[OriginStateName] [varchar](50) NULL,
[OriginWac] [smallint] NULL,
[RPCarrier] [varchar](3) NULL,
[Passengers] [real] NULL,
[Distance] [real] NULL,
[DistanceGroup] [smallint] NULL,
[ItinGeoType] [smallint] NULL,
[MktID] [bigint] NULL,
[SeqNum] [smallint] NULL,
[DestAirportID] [smallint] NULL,
[DestAirportSeqID] [int] NULL,
[DestCityMarketID] [int] NULL,
[Dest] [varchar](4) NULL,
[DestCountry] [varchar](3) NULL,
[DestStateFips] [smallint] NULL,
[DestState] [varchar](3) NULL,
[DestStateName] [varchar](50) NULL,
[DestWac] [smallint] NULL,
[Break] [varchar](1) NULL,
[CouponType] [varchar](1) NULL,
[TkCarrier] [varchar](3) NULL,
[OpCarrier] [varchar](3) NULL,
[FareClass] [varchar](1) NULL,
[Gateway] [bit] NULL,
[CouponGeoType] [smallint] NULL
)
ON [ps_ontime] ([Year])

Comments

  • Anonymous
    July 21, 2016
    Terrible to see all that row group trimming due to dictionary size in your screenshots. This ruins otherwise perfectly good row groups. Please remove the dictionary size limit and allow us to create even bigger row groups e.g. 2, 4, 8M rows. Some data sets benefit greatly from deduplication provided by larger dictionaries.
    • Anonymous
      July 27, 2016
      Mark - Thank you for your comment and feedback. We wanted to mention that having larger row groups might affect segment elimination as these larger row groups mean a larger range values per segment, and hence a lower probability of segment elimination. At the same time larger row groups and larger dictionary sizes mean increased memory requirements. So there can be supporting arguments either way (for larger or smaller row groups.)In conclusion, this is a valid ask, but there are no immediate plans to provide a way to tweak row group sizes. Feel free to log a suggestion at https://connect.microsoft.com and we can revisit the item based on collective feedback.
  • Anonymous
    July 22, 2016
    Thanks for this, Arvind. Do you think parallel insert into b+trees (from a single query) will be implemented in the future? Would this be impractical for technical reasons?
    • Anonymous
      July 22, 2016
      The comment has been removed
      • Anonymous
        July 30, 2016
        Hi Arvind, yes, the parallel load into a heap followed by a clustered index build has been much faster. To give an example, I recently had to reload a 850 million row table to convert an int IDENTITY to a bigint. On SQL Server 2014, the single-threaded INSERT ... SELECT into a page-compressed clustered index followed by building a couple nonclustered indexes took about 85 minutes minutes. On SQL Server 2016, the parallel INSERT ... SELECT into an uncompressed heap took 5 minutes, followed by a page-compressed clustered index build with MAXDOP=8 which takes 40 minutes. The SQL Server 2016 instance is running on a machine with much less RAM and fewer CPUs, so this is quite an improvement for the subset of rowstore data-loading scenarios where I can load into a heap and create a btree afterwards.
  • Anonymous
    July 25, 2016
    The comment has been removed
    • Anonymous
      July 27, 2016
      Thank you very much Mohamed for your detailed feedback, it is very much appreciated! The restriction with triggers has been mentioned in my post. The feedback about the SEQUENCE object usage is also noted.
  • Anonymous
    August 09, 2016
    The comment has been removed
  • Anonymous
    August 12, 2016
    Will the presence of "ORDER BY" in the select statement in any way affect parallel insert/select?
    • Anonymous
      August 17, 2016
      Hi Steven, first I must ask a side question: why do you have an OrderBy clause in the SELECT? Do note that the order of the rowset being inserted in no way guarantees the physical layout of the data. As you probably already know, the only way to guarantee the ordering of results returned to client is to specify an OrderBy clause in the final SELECT.Now, that said, I don't think the OrderBy in the SELECT will cause serial plan. However it might introduce a costly sort operator, and in some cases, order-preserving parallel sort can be somewhat slower. Do let me know why you have this ordering construct in your query in the first place and then I can comment further.- Arvind.
      • Anonymous
        October 14, 2016
        The comment has been removed
  • Anonymous
    December 12, 2018
    I wanted to add some updates after doing considerable testing on SQL2017, since it has been a while and this is still the best article out there.In SQL 2017/AzureSQL, having an IDENTITY or a SEQUENCE does not disable parallel inserts.In SQL 2017, you can have a single clustered index and you will get parallel inserts, while in AzureSQL (compat level 140), the parallel insert is disabled. In AzureSQL/SQL2017 - you get parallel inserts with a clustered columnstore index (with an identity too). I have found it about 20% faster to parallel insert into a new table with a columnstore index already in place then it is to do the parallel insert (or select * into) and then create the columnstore index. Also in 2017, the columnstore that is parallel inserted is immediately left in the final COMPRESSED state. Also, on AzureSQL (both DTU and vCore models), I have done a ton of testing and found that you get incremental performance increases going from MAXDOP 4 to 8 to 16 to 32 - even though the documentation suggests setting MAXDOP shouldn't help.