StringFormat.SetMeasurableCharacterRanges(CharacterRange[]) Methode

Definition

Namespace:

System.Drawing

Assembly:

System.Drawing.Common.dll

Paket:

System.Drawing.Common v9.0.0-rc.2.24474.1

Quelle:

StringFormat.cs

Gibt ein Array von CharacterRange Strukturen an, die die Zeichenbereiche darstellen, die durch einen Aufruf der MeasureCharacterRanges(String, Font, RectangleF, StringFormat) -Methode gemessen werden.

public:
 void SetMeasurableCharacterRanges(cli::array <System::Drawing::CharacterRange> ^ ranges);

public void SetMeasurableCharacterRanges (System.Drawing.CharacterRange[] ranges);

member this.SetMeasurableCharacterRanges : System.Drawing.CharacterRange[] -> unit

Public Sub SetMeasurableCharacterRanges (ranges As CharacterRange())

Parameter

ranges

CharacterRange[]

Ein Array von CharacterRange Strukturen, die die Von einem Aufruf der MeasureCharacterRanges(String, Font, RectangleF, StringFormat)-Methode gemessenen Zeichenbereiche angibt.

Ausnahmen

OverflowException

Mehr als 32 Zeichenbereiche werden festgelegt.

Beispiele

Das folgende Beispiel wurde für die Verwendung mit Windows Forms entwickelt und erfordert PaintEventArgse, bei dem es sich um einen Parameter des Paint-Ereignishandlers handelt. Der Code führt die folgenden Aktionen aus:

• Legt die Zeichenbereiche der StringFormatfest.

• Misst die Zeichenbereiche für ein bestimmtes Zeichenfolgen- und Layoutrechteck.

• Zeichnet das Zeichenfolgen- und Layoutrechteck.

• Zeichnet die Regionen. Jede Region gibt einen Bereich an, der von einem Zeichenbereich belegt wird. Die Werte in den Regionen werden festgelegt, wenn die Zeichenbereiche durch die MeasureCharacterRanges-Methode gemessen werden.

• Wiederholt die ersten vier Schritte, enthält jedoch nachfolgende Leerzeichen in der Messung jedes Zeichenbereichs.

• Löscht die Formatkennzeichnungen der StringFormat, sodass nachfolgende Leerzeichen nicht in der Maßeinheit der einzelnen Zeichenbereiche enthalten sind.

• Wiederholt die ersten vier Schritte, verwendet jedoch ein anderes Layoutrechteck, um zu veranschaulichen, dass sich das Layoutrechteck auf die Maße der Zeichenbereiche auswirkt. Der Schriftgrad wirkt sich auch auf die Messung aus.

void SetMeasCharRangesExample( PaintEventArgs^ e )
{
   Graphics^ g = e->Graphics;
   SolidBrush^ redBrush = gcnew SolidBrush( Color::FromArgb( 50, 255, 0, 0 ) );

   // Layout rectangles, font, and string format used for displaying string.
   Rectangle layoutRectA = Rectangle(20,20,165,80);
   Rectangle layoutRectB = Rectangle(20,110,165,80);
   Rectangle layoutRectC = Rectangle(20,200,240,80);
   System::Drawing::Font^ tnrFont = gcnew System::Drawing::Font( "Times New Roman",16 );
   StringFormat^ strFormat = gcnew StringFormat;

   // Ranges of character positions within a string.
   array<CharacterRange>^ charRanges = {CharacterRange(3,5),CharacterRange(15,2),CharacterRange(30,15)};

   // Each region specifies the area occupied by the characters within a
   // range of positions. the values are obtained by using a method that
   // measures the character ranges.
   array<System::Drawing::Region^>^charRegions = gcnew array<System::Drawing::Region^>(charRanges->Length);

   // String to be displayed.
   String^ str = "The quick, brown fox easily jumps over the lazy dog.";

   // Set the char ranges for the string format.
   strFormat->SetMeasurableCharacterRanges( charRanges );

   // loop counter (unsigned 8-bit integer)
   Byte i;

   // Measure the char ranges for a given string and layout rectangle. Each
   // area occupied by the characters in a range is stored as a region. Then
   // draw the string and layout rectangle, and paint the regions.
   charRegions = g->MeasureCharacterRanges( str, tnrFont, layoutRectA, strFormat );
   g->DrawString( str, tnrFont, Brushes::Blue, layoutRectA, strFormat );
   g->DrawRectangle( Pens::Black, layoutRectA );

   // Paint the regions.
   for ( i = 0; i < charRegions->Length; i++ )
      g->FillRegion( redBrush, charRegions[ i ] );

   // Repeat the above steps, but include trailing spaces in the char
   // range measurement by setting the appropriate string format flag.
   strFormat->FormatFlags = StringFormatFlags::MeasureTrailingSpaces;
   charRegions = g->MeasureCharacterRanges( str, tnrFont, layoutRectB, strFormat );
   g->DrawString( str, tnrFont, Brushes::Blue, layoutRectB, strFormat );
   g->DrawRectangle( Pens::Black, layoutRectB );
   for ( i = 0; i < charRegions->Length; i++ )
      g->FillRegion( redBrush, charRegions[ i ] );

   // Clear all the format flags.
   strFormat->FormatFlags = StringFormatFlags(0);

   // Repeat the steps, but use a different layout rectangle. the dimensions
   // of the layout rectangle and the size of the font both affect the
   // character range measurement.
   charRegions = g->MeasureCharacterRanges( str, tnrFont, layoutRectC, strFormat );
   g->DrawString( str, tnrFont, Brushes::Blue, layoutRectC, strFormat );
   g->DrawRectangle( Pens::Black, layoutRectC );

   // Paint the regions.
   for ( i = 0; i < charRegions->Length; i++ )
      g->FillRegion( redBrush, charRegions[ i ] );
}

public void SetMeasCharRangesExample(PaintEventArgs e)
{
    Graphics     g = e.Graphics;
    SolidBrush   redBrush = new SolidBrush(Color.FromArgb(50, 255, 0, 0));
             
    // Layout rectangles, font, and string format used for displaying string.
    Rectangle    layoutRectA = new Rectangle(20, 20, 165, 80);
    Rectangle    layoutRectB = new Rectangle(20, 110, 165, 80);
    Rectangle    layoutRectC = new Rectangle(20, 200, 240, 80);
    Font         tnrFont = new Font("Times New Roman", 16);
    StringFormat strFormat = new StringFormat();
             
    // Ranges of character positions within a string.
    CharacterRange[] charRanges = { new CharacterRange(3, 5),
        new CharacterRange(15, 2), new CharacterRange(30, 15)};
             
    // Each region specifies the area occupied by the characters within a
    // range of positions. the values are obtained by using a method that
    // measures the character ranges.
    Region[]     charRegions = new Region[charRanges.Length];
             
    // String to be displayed.
    string  str =
        "The quick, brown fox easily jumps over the lazy dog.";
             
    // Set the char ranges for the string format.
    strFormat.SetMeasurableCharacterRanges(charRanges);
   
    // loop counter (unsigned 8-bit integer)
    byte  i;    
   
    // Measure the char ranges for a given string and layout rectangle. Each
    // area occupied by the characters in a range is stored as a region. Then
    // draw the string and layout rectangle, and paint the regions.
    charRegions = g.MeasureCharacterRanges(str, tnrFont,
        layoutRectA, strFormat);
   g.DrawString(str, tnrFont, Brushes.Blue, layoutRectA, strFormat);
    g.DrawRectangle(Pens.Black, layoutRectA);
     
    // Paint the regions.
    for (i = 0; i < charRegions.Length; i++)
        g.FillRegion(redBrush, charRegions[i]);   

    // Repeat the above steps, but include trailing spaces in the char
    // range measurement by setting the appropriate string format flag.
    strFormat.FormatFlags = StringFormatFlags.MeasureTrailingSpaces;
    charRegions = g.MeasureCharacterRanges(str, tnrFont,
        layoutRectB, strFormat);
    g.DrawString(str, tnrFont, Brushes.Blue, layoutRectB, strFormat);
    g.DrawRectangle(Pens.Black, layoutRectB);

    for (i = 0; i < charRegions.Length; i++)
        g.FillRegion(redBrush, charRegions[i]);   
   
    // Clear all the format flags.
    strFormat.FormatFlags = 0;                   
 
    // Repeat the steps, but use a different layout rectangle. the dimensions
    // of the layout rectangle and the size of the font both affect the
    // character range measurement.
    charRegions = g.MeasureCharacterRanges(str, tnrFont,
        layoutRectC, strFormat);
    g.DrawString(str, tnrFont, Brushes.Blue, layoutRectC, strFormat);
    g.DrawRectangle(Pens.Black, layoutRectC);
    
    // Paint the regions.
    for (i = 0; i < charRegions.Length; i++)
        g.FillRegion(redBrush, charRegions[i]);   
}

Public Sub SetMeasCharRangesExample(ByVal e As PaintEventArgs)
    Dim g As Graphics = e.Graphics
    Dim redBrush As New SolidBrush(Color.FromArgb(50, 255, 0, 0))

    ' Layout rectangles, font, and string format used for
    ' displaying string.
    Dim layoutRectA As New Rectangle(20, 20, 165, 80)
    Dim layoutRectB As New Rectangle(20, 110, 165, 80)
    Dim layoutRectC As New Rectangle(20, 200, 240, 80)
    Dim tnrFont As New Font("Times New Roman", 16)
    Dim strFormat As New StringFormat

    ' Ranges of character positions within a string.
    Dim charRanges As CharacterRange() = {New CharacterRange(3, 5), _
    New CharacterRange(15, 2), New CharacterRange(30, 15)}

    ' Each region specifies the area occupied by the characters within
    ' a range of positions. The values are obtained by using a method
    ' that measures the character ranges.
    Dim charRegions(charRanges.Length) As [Region]

    ' String to be displayed.
    Dim str As String = _
    "The quick, brown fox easily jumps over the lazy dog."

    ' Set the char ranges for the string format.
    strFormat.SetMeasurableCharacterRanges(charRanges)

    ' Loop counter (unsigned 8-bit integer).
    Dim i As Byte


    ' Measure the char ranges for a given string and layout rectangle.
    ' Each area occupied by the characters in a range is stored as a
    ' region. then draw the string and layout rectangle and paint the
    ' regions.
    charRegions = g.MeasureCharacterRanges(str, tnrFont, _
    RectangleF.op_Implicit(layoutRectA), strFormat)
    g.DrawString(str, tnrFont, Brushes.Blue, _
    RectangleF.op_Implicit(layoutRectA), strFormat)
    g.DrawRectangle(Pens.Black, layoutRectA)

    ' Paint the regions.
    For i = 0 To charRegions.Length - 1
        g.FillRegion(redBrush, charRegions(i))
    Next i

    ' Repeat the above steps, but include trailing spaces in the char
    ' range measurement by setting the appropriate string format flag.
    strFormat.FormatFlags = StringFormatFlags.MeasureTrailingSpaces
    charRegions = g.MeasureCharacterRanges(str, tnrFont, _
    RectangleF.op_Implicit(layoutRectB), strFormat)
    g.DrawString(str, tnrFont, Brushes.Blue, _
    RectangleF.op_Implicit(layoutRectB), strFormat)
    g.DrawRectangle(Pens.Black, layoutRectB)

    ' Paint the regions.
    For i = 0 To charRegions.Length - 1
        g.FillRegion(redBrush, charRegions(i))
    Next i

    ' Clear all the format flags.
    strFormat.FormatFlags = 0

    ' Repeat the steps, but use a different layout rectangle. The
    ' dimensions of the layout rectangle and the size of the font both
    ' affect the character range measurement.
    charRegions = g.MeasureCharacterRanges(str, tnrFont, _
    RectangleF.op_Implicit(layoutRectC), strFormat)
    g.DrawString(str, tnrFont, Brushes.Blue, _
    RectangleF.op_Implicit(layoutRectC), strFormat)
    g.DrawRectangle(Pens.Black, layoutRectC)

    ' Paint the regions.
    For i = 0 To charRegions.Length - 1
        g.FillRegion(redBrush, charRegions(i))
    Next i
End Sub

Hinweise

Das Festlegen von mehr als 32 Zeichenbereichen ist nicht zulässig und führt zu einer System.OverflowException.