2.2.1.14.1 Child Elements
The following table lists the child elements of the Payload.Audio element.
|
Element |
Type |
Available |
Description |
Units |
|---|---|---|---|---|
|
PayloadType<101> |
xs:int |
Yes |
Payload number used for the codec, as specified in [MS-RTP] section 2.2.1. |
Integer |
|
PayloadDescription |
xs:string [256] |
Yes |
Codec name, as specified in [MS-SDPEXT] section 3.1.5.3 or [RFC3551] section 6. |
Not applicable |
|
SampleRate |
xs:int |
Yes |
Audio sample rate. |
Samples per second |
|
FrameDuration |
xs:int |
No |
Not used. |
|
|
FrameOctets |
xs:int |
No |
Not used. |
|
|
FramesPerSecond |
xs:int |
No |
Not used. |
|
|
PacketsPerSecond |
xs:int |
No |
Not used. |
|
|
FMTP |
xs:string |
No |
Not used. |
|
|
Signal |
SignalType |
Yes |
Metrics regarding signal level and noise. |
Not applicable |
|
JitterBuffer |
JitterBufferType |
No |
Not used. |
|
|
SilenceSupress |
SilenceSuppressionStateType |
No |
Not used. |
|
|
v2:AudioFECUsed<102> |
xs:boolean |
Yes |
"True" means that audio forward error correction (FEC) was used at some point during the call. "False" means that no audio FEC was used during the call. |
Not applicable |
|
v2:OpaqueAudioData<103> |
v2:OpaqueAudioDataType |
No |
Not used. |
|
|
v3:AudioPostFECPLR<104> |
xs:float |
No |
Reports packet loss rate after FEC has been applied for audio. Value between 0.00 and 1.00. |
Percentage |
|
v2:Separator<105> |
default |
No |
Separator element used for future schema extensions. |
Not applicable |
|
v3:DecodeStereoPercent <106> |
xs:float |
Yes |
Percentage of audio decoded as stereo. |
Percentage |
|
v3:AecRenderStereoPercent<107> |
xs:float |
Yes |
Percentage of call processed by AEC as stereo render. |
Percentage |
|
v3:EncodeStereoPercent <108> |
xs:float |
Yes |
Percentage of audio encoded as stereo. |
Percentage |
|
v3:AecCaptureStereoPercent <109> |
xs:float |
Yes |
Percentage of call processed by AEC as stereo capture. |
Percentage |
|
v3:Separator3<110> |
default |
No |
Separator element used for future schema extensions. |
Not applicable |
|
v4:JitterBufferSizeAvg<111> |
xs:int |
Yes |
Average size of jitter buffer during session. |
milliseconds |
|
v4:JitterBufferSizeMax<112> |
xs:int |
Yes |
Maximum size of jitter buffer during session. |
Milliseconds |
|
v4:JitterBufferSizeMin<113> |
xs:int |
Yes |
Minimum size of jitter buffer during session. |
Milliseconds |
|
v4:JitterBufferSizeSD<114> |
xs:int |
Yes |
Standard deviation of jitter buffer size during session. |
milliseconds |
|
v4:NetworkJitterAvg<115> |
xs:float |
Yes |
Average of network jitter computed over 20 second windows during the session. |
milliseconds |
|
v4:NetworkJitterMax<116> |
xs:float |
Yes |
Maximum of network jitter computed over 20 second windows during the session. |
milliseconds |
|
v4:NetworkJitterMin<117> |
xs:float |
Yes |
Minimum of network jitter computed over 20 second window during the session. |
milliseconds |
|
v4:NetworkJitterSD<118> |
xs:float |
Yes |
Standard deviation of network jitter computed over 20 second window during the session. |
milliseconds |
|
v4:PacketReorderRatio<119> |
xs:float |
Yes |
Ratio of packets received that were out of sequence during the session. |
Fraction |
|
v4:PacketReorderDepthAvg<120> |
xs:int |
Yes |
Average of the number of packets between the when the current packet and the out-of sequence packet was received. |
packets |
|
v4:PacketReorderDepthMax<121> |
xs:int |
Yes |
Maximum of the number of packets between the when the current packet and the out-of sequence packet was received. |
packets |
|
v4:BurstLossLength1<122> |
xs:float |
Yes |
Ratio of lost single lost packet over the total number packets for the session. |
Fraction |
|
v4:BurstLossLength2<123> |
xs:float |
Yes |
Ratio of 2 consecutive lost packets over the total number packets for the session. |
Fraction |
|
v4:BurstLossLength3<124> |
xs:float |
Yes |
Ratio of 3 consecutive lost packets over the total number packets for the session. |
Fraction |
|
v4:BurstLossLength4<125> |
xs:float |
Yes |
Ratio of 4 consecutive lost packets over the total number packets for the session. |
Fraction |
|
v4:BurstLossLength5<126> |
xs:float |
Yes |
Ratio of 5 consecutive lost packets over the total number packets for the session. |
Fraction |
|
v4:BurstLossLength6<127> |
xs:float |
Yes |
Ratio of 6 consecutive lost packets over the total number packets for the session. |
Fraction |
|
v4:BurstLossLength7<128> |
xs:float |
Yes |
Ratio of 7 consecutive lost packets over the total number packets for the session. |
Fraction |
|
v4:BurstLossLength8OrHigher<129> |
xs:float |
Yes |
Ratio of 8 or more consecutive lost packets over the total number packets for the session. |
Fraction |
|
v4:FECRecvOnPercent<130> |
xs:float |
Yes |
Percentage of session where FEC was enabled for packets received. |
Percentage |
|
v4:FECRecvDistance1<131> |
xs:float |
Yes |
Percentage of session where packets with FEC distance of 1 was received. |
Percentage |
|
v4:FECRecvDistance2<132> |
xs:float |
Yes |
Percentage of session where packets with FEC distance of 2 was received. |
Percentage |
|
v4:FECRecvDistance3<133> |
xs:float |
Yes |
Percentage of session where packets with FEC distance of 3 was received. |
Percentage |
|
v4:FECRecvDistance4<134> |
xs:float |
Yes |
Percentage of session where packets with FEC distance of 4 was received. |
Percentage |
|
v4:FECRecvDistance5<135> |
xs:float |
Yes |
Percentage of session where packets with FEC distance of 5 was received. |
Percentage |
|
v4:FECRecvDistance6<136> |
xs:float |
Yes |
Percentage of session where packets with FEC distance of 6 was received. |
Percentage |
|
v4:FECRecvDistance7<137> |
xs:float |
Yes |
Percentage of session where packets with FEC distance of 7 was received. |
Percentage |
|
v4:FECRecvDistance8OrHigher<138> |
xs:float |
Yes |
Percentage of session where packets with FEC distance of 8 or larger was received. |
Percentage |
|
v4:FECRecvScheme<139> |
xs:float |
Yes |
Track which FEC scheme is being used during session. |
0 – codec level FEC (in-band) 1 –external FEC (RFC 2198)
|
|
v4:FECRecvRedundancy<140> |
xs:float |
Yes |
Average FEC redundancy for packets received. |
float |
|
v4:HealerPushCount<141> |
xs:int |
Yes |
Number of packets pushed into the audio healer/jitter buffer from network. |
packets |
|
v4:HealerPullCount<142> |
xs:int |
Yes |
Number of packets pulled from the audio healer/jitter buffer to be rendered or mixed. |
packets |
|
v4:SendMutePercent<143> |
xs:float |
Yes |
Percentage of session duration where the client was muted. |
percentage |
|
v4:CaptureOffloadedEffectsAudio<144> |
xs:int |
Yes |
Bitmask representing which audio capture DSP effects were used in hardware. |
TBD |
|
v4:RenderOffloadedEffectsAudio<145> |
xs:int |
Yes |
Bitmask representing which audio render DSP effects were used in hardware. |
TBD |
|
v4:Separator4<146> |
default |
Yes |
Separator used for future schema extensions. |
Not applicable |