New-AzMobileNetworkPccRuleConfigurationObject
Create an in-memory object for PccRuleConfiguration.
Syntax
New-AzMobileNetworkPccRuleConfigurationObject
-RuleName <String>
-RulePrecedence <Int32>
-ServiceDataFlowTemplate <IServiceDataFlowTemplate[]>
[-GuaranteedBitRateDownlink <String>]
[-GuaranteedBitRateUplink <String>]
[-RuleQoPolicyAllocationAndRetentionPriorityLevel <Int32>]
[-RuleQoPolicyFiveQi <Int32>]
[-RuleQoPolicyMaximumBitRateDownlink <String>]
[-RuleQoPolicyMaximumBitRateUplink <String>]
[-RuleQoPolicyPreemptionCapability <PreemptionCapability>]
[-RuleQoPolicyPreemptionVulnerability <PreemptionVulnerability>]
[-TrafficControl <TrafficControlPermission>]
[<CommonParameters>] Description
Create an in-memory object for PccRuleConfiguration.
Examples
Example 1: Create an in-memory object for PccRuleConfiguration.
$ServiceDataFlowTemplate = New-AzMobileNetworkServiceDataFlowTemplateObject -Direction "Bidirectional" -Protocol "255" -RemoteIPList "any" -TemplateName azps-mn-flow-template
New-AzMobileNetworkPccRuleConfigurationObject -RuleName azps-mn-service-rule -RulePrecedence 0 -ServiceDataFlowTemplate $ServiceDataFlowTemplate -TrafficControl 'Enabled' -RuleQoPolicyPreemptionVulnerability 'Preemptable' -RuleQoPolicyPreemptionCapability 'NotPreempt' -RuleQoPolicyAllocationAndRetentionPriorityLevel 9 -RuleQoPolicyMaximumBitRateDownlink "1 Gbps" -RuleQoPolicyMaximumBitRateUplink "500 Mbps"
RuleName RulePrecedence TrafficControl
-------- -------------- --------------
azps-mn-service-rule 0 EnabledCreate an in-memory object for PccRuleConfiguration.
Parameters
-GuaranteedBitRateDownlink
Downlink bit rate.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-GuaranteedBitRateUplink
Uplink bit rate.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RuleName
The name of the rule. This must be unique within the parent service. You must not use any of the following reserved strings - 'default', 'requested' or 'service'.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RulePrecedence
A precedence value that is used to decide between data flow policy rules when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all data flow policy rules configured in the mobile network.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RuleQoPolicyAllocationAndRetentionPriorityLevel
QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RuleQoPolicyFiveQi
QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RuleQoPolicyMaximumBitRateDownlink
Downlink bit rate.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RuleQoPolicyMaximumBitRateUplink
Uplink bit rate.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RuleQoPolicyPreemptionCapability
QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.
| Type: | PreemptionCapability |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RuleQoPolicyPreemptionVulnerability
QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.
| Type: | PreemptionVulnerability |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ServiceDataFlowTemplate
The set of data flow templates to use for this data flow policy rule. To construct, see NOTES section for SERVICEDATAFLOWTEMPLATE properties and create a hash table.
| Type: | IServiceDataFlowTemplate[] |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-TrafficControl
Determines whether flows that match this data flow policy rule are permitted.
| Type: | TrafficControlPermission |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Outputs
Azure PowerShell