Set-NetFirewallHyperVRule
Modifies existing Hyper-V firewall rules.
Syntax
Set-NetFirewallHyperVRule
[-Name] <string[]>
[-NewDisplayName <string>]
[-RulePriority <uint16>]
[-Direction {Inbound | Outbound}]
[-VMCreatorId <string>]
[-Protocol <string>]
[-LocalAddresses <string[]>]
[-LocalPorts <string[]>]
[-RemoteAddresses <string[]>]
[-RemotePorts <string[]>]
[-Action {NotConfigured | Allow | Block}]
[-Enabled {True | False}]
[-Profiles {Any | Domain | Private | Public | NotApplicable}]
[-CimSession <CimSession[]>]
[-ThrottleLimit <int>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-NetFirewallHyperVRule
-DisplayName <string[]>
[-NewDisplayName <string>]
[-RulePriority <uint16>]
[-Direction {Inbound | Outbound}]
[-VMCreatorId <string>]
[-Protocol <string>]
[-LocalAddresses <string[]>]
[-LocalPorts <string[]>]
[-RemoteAddresses <string[]>]
[-RemotePorts <string[]>]
[-Action {NotConfigured | Allow | Block}]
[-Enabled {True | False}]
[-Profiles {Any | Domain | Private | Public | NotApplicable}]
[-CimSession <CimSession[]>]
[-ThrottleLimit <int>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Set-NetFirewallHyperVRule
-InputObject <CimInstance#MSFT_NetFirewallHyperVRule[]>
[-NewDisplayName <string>]
[-RulePriority <uint16>]
[-Direction {Inbound | Outbound}]
[-VMCreatorId <string>]
[-Protocol <string>]
[-LocalAddresses <string[]>]
[-LocalPorts <string[]>]
[-RemoteAddresses <string[]>]
[-RemotePorts <string[]>]
[-Action {NotConfigured | Allow | Block}]
[-Enabled {True | False}]
[-Profiles {Any | Domain | Private | Public | NotApplicable}]
[-CimSession <CimSession[]>]
[-ThrottleLimit <int>]
[-AsJob]
[-PassThru]
[-WhatIf]
[-Confirm]
[<CommonParameters>] Description
The Set-NetFirewallHyperVRule cmdlet modifies existing Hyper-V firewall rule properties. This cmdlet gets one or more rules to be modified using the Name parameter or the DisplayName parameter.
Rules cannot be queried by property in this cmdlet, but the querying can be done by the Get-NetFirewallHyperVRule cmdlet and piped into this cmdlet. The remaining parameters modify the properties of the specified rules.
Examples
EXAMPLE 1
PS C:\> Set-NetFirewallHyperVRule -Name DisplayName "Block Outbound to My Servers" -RemoteAddresses "10.0.0.0/32"This example modifies the existing Hyper-V firewall rules with DisplayName "Block Outbound to My Servers" and updates the RemoteAddresses condition.
Parameters
-Action
Updates the Action value for the matching Hyper-V firewall rules. This parameter specifies the action to take on traffic that matches this rule. The acceptable values for this parameter are: Allow or Block.
- Allow: Network packets that match all criteria specified in this rule are permitted through the firewall. This is the default value.
- Block: Network packets that match all criteria specified in this rule are dropped by the firewall.
| Type: | Action |
| Accepted values: | NotConfigured, Allow, Block |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-AsJob
Runs the cmdlet as a background job. Use this parameter to run commands that take a long time to complete.
| Type: | SwitchParameter |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-CimSession
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
| Type: | CimSession[] |
| Aliases: | Session |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Confirm
Prompts you for confirmation before running the cmdlet.
| Type: | SwitchParameter |
| Aliases: | cf |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Direction
Updates the Direction value for the matching Hyper-V firewall rules. This parameter specifies which direction of traffic to match with this rule. The acceptable values for this parameter are: Inbound or Outbound.
| Type: | Direction |
| Accepted values: | Inbound, Outbound |
| Position: | Named |
| Default value: | Inbound |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-DisplayName
Specifies that only matching Hyper-V firewall rules of the indicated display name are updated.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | True |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Enabled
Updates the Enabled value of the matching Hyper-V firewall rules. This parameter specifies that the rule object is administratively enabled or administratively disabled. The acceptable values for this parameter are:
- True: Specifies the rule is currently enabled.
- False: Specifies the rule is currently disabled.
Note that the type of this parameter is not Boolean, therefore $true and $false variables are not acceptable values here. Use "True" and "False" text strings instead.
A disabled rule will not actively modify computer behavior, but the management construct still exists on the computer so it can be re-enabled.
| Type: | Enabled |
| Accepted values: | True, False |
| Position: | Named |
| Default value: | True |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LocalAddresses
Updates the LocalAddresses value for the matching Hyper-V firewall rules. This parameter specifies that network packets with matching IP addresses match this rule. This parameter value is an IPv4 or IPv6 address, hostname, subnet, or range. The acceptable formats for this parameter are:
- Single IPv4 Address: 1.2.3.4
- Single IPv6 Address: fe80::1
- IPv4 Subnet (by network bit count): 1.2.3.4/24
- IPv6 Subnet (by network bit count): fe80::1/48
- IPv4 Subnet (by network mask): 1.2.3.4/255.255.255.0
- IPv4 Range: 1.2.3.4-1.2.3.7
- IPv6 Range: fe80::1-fe80::9
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-LocalPorts
Updates the LocalPorts value for the matching Hyper-V firewall rules.
This parameter specifies that network packets with matching IP local port numbers match this rule. The acceptable values are:
- Port range: 0-65535
- Port number: 80
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Name
Specifies that only matching Hyper-V firewall rules of the indicated name are updated.
| Type: | String |
| Aliases: | ID |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-NewDisplayName
Updates the DisplayName of the matching Hyper-V firewall rules.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Profiles
Specifies one or more profiles to which the hyper-v firewall rule is assigned. The rule is active on the local computer only when the specified profile is currently active. This relationship is many-to-many and can be indirectly modified by the user, by changing the Profiles field on instances of rules. Only one profile is applied at a time. The acceptable values for this parameter are: Any, Domain, Private, Public, or NotApplicable. The default value is Any. Separate multiple entries with a comma and do not include any spaces.
| Type: | Profiles |
| Accepted values: | Any, Domain, Private, Public, NotApplicable |
| Position: | Named |
| Default value: | Any |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-Protocol
Updates the protocol value of the matching Hyper-V firewall rules.
This parameter specifies that network packets with matching IP protocol match this rule. The acceptable values for this parameter are:
- Protocols by number: 0-255.
- Protocols by name: TCP, UDP, ICMPv4, or ICMPv6.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemoteAddresses
Updates the RemoteAddresses value of the matching Hyper-V firewall rules. This parameter specifies that network packets with matching IP addresses match this rule. This parameter value is an IPv4 or IPv6 address, subnet, or range. The acceptable formats for this parameter are:
- Single IPv4 Address: 1.2.3.4
- Single IPv6 Address: fe80::1
- IPv4 Subnet (by network bit count): 1.2.3.4/24
- IPv6 Subnet (by network bit count): fe80::1/48
- IPv4 Subnet (by network mask): 1.2.3.4/255.255.255.0
- IPv4 Range: 1.2.3.4-1.2.3.7
- IPv6 Range: fe80::1-fe80::9
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RemotePorts
Updates the RemotePorts value of the matching Hyper-V firewall rules. This parameter specifies that network packets with matching IP port numbers match this rule. The acceptable values are:
- Port range: 0-65535
- Port number: 80
| Type: | String[] |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-RulePriority
Updates the RulePriority value of the matching Hyper-V firewall rules. This parameter specifies the order in which rules are evaluated. A lower priority rule is evaluated before a higher priority rule.
| Type: | uint16 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-ThrottleLimit
Specifies the maximum number of concurrent operations that can be established to run the cmdlet.
If this parameter is omitted or a value of 0 is entered, Windows PowerShell calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer.
The throttle limit applies only to the current cmdlet, not to the session or to the computer.
| Type: | Int32 |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-VMCreatorId
Updates the VMCreatorId value of the matching Hyper-V firewall rules. This parameter specifies that network packets originating from a VM matching this VMCreatorId matches this rule. The format for this value is a GUID enclosed in brackets: '{9E288F02-CE00-4D9E-BE2B-14CE463B0298}'.
| Type: | String |
| Position: | Named |
| Default value: | None |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
| Type: | SwitchParameter |
| Aliases: | wi |
| Position: | Named |
| Default value: | False |
| Required: | False |
| Accept pipeline input: | False |
| Accept wildcard characters: | False |
Inputs
None
Outputs
The Microsoft.Management.Infrastructure.CimInstance object is a wrapper class that displays Windows Management Instrumentation (WMI) objects.
The path after the pound sign (#) provides the namespace and class name for the underlying WMI object.
Related Links
Feedback
Bald verfügbar: Im Laufe des Jahres 2024 werden wir GitHub-Issues stufenweise als Feedbackmechanismus für Inhalte abbauen und durch ein neues Feedbacksystem ersetzen. Weitere Informationen finden Sie unter https://aka.ms/ContentUserFeedback.
Feedback senden und anzeigen für