Freigeben über

Walkthrough: Using ASP.NET Application Services

  • Artikel

ASP.NET provides application services that can be accessed over the Web that enable client applications to use user authentication, role, and profile information. The services can be accessed by client applications that are written in different languages and that run on different operating systems. The only requirement is that these clients must be able to communicate by using SOAP 1.1 protocol.

This walkthrough shows how to configure and use ASP.NET application services. The walkthrough is divided into the following parts:

  • The first part shows how to configure an ASP.NET Web site to expose the application services.

  • The second part shows how to build a Windows console application that accesses a user's authentication, role, and profile information. In this walkthrough you will build a Windows console application, but the ASP.NET application services are available to any client applications that can send and receive messages in SOAP format.

  • The final part describes how to deploy the application services Web site on Windows Server 2008 and IIS 7.0.

Prerequisites

In order to complete this walkthrough, you will need:

  • Visual Studio 2008. You cannot use Microsoft Visual Web Developer 2005 for this walkthrough, because you will create a Windows console application, which is not supported in Visual Web Developer Express.

  • Microsoft SQL Server or SQL Server Express Edition installed on your computer.

Exposing the Application Services

This section describes how to expose the application services as part of an ASP.NET Web site so that they can be accessed by any client on the network. The steps described here apply only to the server.

Note

You must use a file system Web site for this walkthrough. The walkthrough assumes that you are using the ASP.NET Development Server instead of IIS to run the examples. For more information, see Web Servers in Visual Web Developer. For information about how to deploy the application on Windows Server 2008, see Deploying the Application Services Web Site on Windows Server 2008 later in this walkthrough.

To create the application services Web site

  1. Open Visual Studio 2008.

  2. On the File menu, click New Web Site.

    The New Web Site dialog box is displayed.

  3. Under Visual Studio installed templates, select ASP.NET Web Site.

  4. In the Location list, select File System.

  5. In the Folder text box, name the Web site WcfApplicationServices.

    Note

    You can use any name. If you use a different name, note the name so that you can substitute it when it is required later in this walkthrough.

  6. Click OK.

    Visual Studio creates a new ASP.NET Web site and opens the Default.aspx page.

  7. In the View menu, click Other Windows, and then click Properties Window.

  8. In Solution Explorer, click the name of the Web site.

  9. In the Properties window, set Use dynamic ports to False.

    This instructs Visual Studio to specify a fixed port instead of a randomly selected port when it starts the ASP.NET Development Server. For this walkthrough, you must have a fixed port number that you can use when you generate the client proxy classes and configuration files. For more information, see How to: Specify a Port for the ASP.NET Development Server.

    Note

    You cannot access the Web Site Properties window from the Properties Pages window.

  10. Set Port number to 8080.

    Note

    You can use any available port. If you use a different port, note the port number so that you can substitute that number for 8080 later in this walkthrough.

ASP.NET membership, role, and profile information is stored in a database. This database is created automatically when it is first accessed. In the next procedure, you will write the code that creates users and roles for the Web site. The first time that the Web site is accessed, the database is automatically created. In addition, two roles (Managers and Friends) are added to it.

To create users and role information

  1. Add a Global.asax file to the Web site.

  2. Open the Global.asax file and replace the existing Application_Start method with the following code:

    Sub Application_Start(ByVal sender As Object, ByVal e As EventArgs)
    ' Code that runs on application startup
    ' Warning. This code is just for test purposes 
    ' to generate a SQL Express database quickly.
    ' In a production environment, you must set 
    ' a SQL standard database separately.
    If Not Roles.RoleExists("Managers") Then
        Roles.CreateRole("Managers")
    End If
    If Not Roles.RoleExists("Friends") Then
        Roles.CreateRole("Friends")
    End If
End Sub

    void Application_Start(object sender, EventArgs e) {

    if (!Roles.RoleExists("Managers")) {
        Roles.CreateRole("Managers");
    }
    if (!Roles.RoleExists("Friends")) {
        Roles.CreateRole("Friends");
    }
}

    The first time that the Web site is accessed, the code creates the Aspnetdb.mdf database in the App_Data folder and adds the roles Managers and Friends to it. This database is used to store user credentials, roles, and profile information.

  3. Open the Default.aspx page and replace the markup that is in the page with the following markup.

    <%@ Page Language="VB" AutoEventWireup="true" CodeFile="Default.aspx.vb" Inherits="_Default" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
    <title>Application Services Home Page</title>
</head>
<body>
    <form id="form1" runat="server">
    <div>
        <h2>Enter Users' Information</h2>

        The following selections enable you to create users, and assign them roles and
        profile information.

        <p>
            <asp:Label ID="LoggedId"  Font-Bold="true" ForeColor="red" runat="server"/>
        </p>

        <table border="1">
            <tr>
                <td align="left">Login to change profile</td>
                <td align="left"><asp:LoginStatus ID="LoginStatus1" runat="server" /></td>
            </tr>
            <tr>
                <td align="left">Define profile information (you must login first)</td>
                <td align="left"><a href="ProfileInfo.aspx" target="_self">Profile Information</a></td>
            </tr>
            <tr>
                <td align="left">Create user and assign role</td>
                <td align="left"><a href="CreateUser.aspx"target="_self">New User</a></td>
            </tr>

         </table>

    </div>

    </form>
</body>
</html>

    <%@ Page Language="C#" AutoEventWireup="true"  CodeFile="Default.aspx.cs" Inherits="_Default" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
    <title>Application Services Home Page</title>
</head>
<body>
    <form id="form1" runat="server">
    <div>
        <h2>Enter Users' Information</h2>

    The following selections enable you to create users, and assign them roles and
        profile information.

        <p>
            <asp:Label ID="LoggedId"  Font-Bold="true" ForeColor="red" runat="server"/>
        </p>

        <table border="1">
            <tr>
                <td align="left">Login to change profile</td>
                <td align="left"><asp:LoginStatus ID="LoginStatus1" runat="server" /></td>
            </tr>
            <tr>
                <td align="left">Define profile information (you must login first)</td>
                <td align="left"><a href="ProfileInfo.aspx" target="_self">Profile Information</a></td>
            </tr>
            <tr>
                <td align="left">Create user and assign role</td>
                <td align="left"><a href="CreateUser.aspx"target="_self">New User</a></td>
            </tr>

         </table>

    </div>

    </form>
</body>
</html>

    This markup creates links for the login page, the profile information page, and the new user page. You will add these pages later in the walkthrough.

  4. In the Default.aspx code-behind file, add the following code in the Page_Load method.

    Imports System
Imports System.Web

Partial Public Class _Default
    Inherits System.Web.UI.Page
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs)
        If HttpContext.Current.User.Identity.IsAuthenticated Then
            LoggedId.Text = HttpContext.Current.User.Identity.Name + " you are logged in"
        End If

    End Sub
End Class

    using System;
using System.Web;

public partial class _Default : System.Web.UI.Page {
    protected void Page_Load(object sender, EventArgs e) {

        if (HttpContext.Current.User.Identity.IsAuthenticated) {
            LoggedId.Text = HttpContext.Current.User.Identity.Name +
                " you are logged in";
        } else
            LoggedId.Text = "Not Logged in!";

    }
}

    The code checks whether the user is authenticated.

  5. Add a page named Login.aspx.

  6. Add a Login control to the Login.aspx file.

    The following example shows the markup for the Login.aspx file:

    <%@ Page Language="VB" AutoEventWireup="true" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
    <title>Login Page</title>
</head>
<body>
    <form id="form1" runat="server">
    <div>
        <asp:Login ID="Login1"   runat="server" />
    </div>
    </form>
</body>
</html>

    <%@ Page AutoEventWireup="true" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
    <title>Login Page</title>
</head>
<body>
    <form id="form1" runat="server">
    <div>
<%--    The Login control does all the work  --%>        
<asp:Login ID="Login1"   runat="server"/>
    </div>
    </form>
</body>
</html>

  7. Add a page named ProfileInfo.aspx, and make sure that Place code in separate file is selected.

  8. Add the following markup to the ProfileInfo.aspx page:

    <%@ Page Language="VB" AutoEventWireup="false" CodeFile="ProfileInfo.aspx.vb" Inherits="ProfileInfo" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
    <title>Profile Page</title>
</head>
<body>
    <form id="form1" runat="server">
    <div>
        <h3>Current Authenticated User Profile Information</h3> 

        <a href="Default.aspx">back to default page</a>

        <h4>Read Profile Information</h4>
        <table>
            <tr>
                <td align="left">User Name</td>
                <td align="left">
                    <asp:Label ID="Label1" runat="server" Text="Label"/>
                </td>
            </tr>
            <tr>
                <td align="left">User Roles</td>
                <td align="left">
                    <asp:Label ID="Label2" runat="server" Text="Label"/>
                </td>
            </tr>
            <tr>
                <td align="left">First Name</td>
                <td>
                    <asp:Label ID="Label3" runat="server" Text="Label"/>
                </td>
            </tr>
            <tr>
                <td align="left">Last Name</td>
                <td>    
                    <asp:Label ID="Label4" runat="server" Text="Label"/>
                </td>
            </tr>
            <tr>
                <td align="left">Phone #</td>
                <td>    
                    <asp:Label ID="Label5" runat="server" Text="Label"/>
                </td>
            </tr>

        </table>

        <asp:Button ID="Button2" runat="server" onclick="Button2_Click" 
            Text="Read Profile Information" />

        <hr />

        <h3>Update Profile Information </h3>

        <table>
            <tr>
                <td align="left">First Name</td>
                <td align="left"><asp:TextBox ID="TextBox1" runat="server"/></td>
            </tr>
            <tr>
                <td align="left">Last Name</td>
                <td align="left"><asp:TextBox ID="TextBox2" runat="server"/></td>
            </tr>
            <tr>
                <td align="left">Phone Number</td>
                <td align="left"><asp:TextBox ID="TextBox3" runat="server"/></td>
            </tr>

        </table>

        <asp:Button ID="Button1" runat="server" onclick="Button1_Click" 
        Text="Update Profile Data" />

    </div>
    </form>
</body>
</html>

    <%@ Page Language="C#" AutoEventWireup="true" CodeFile="ProfileInfo.aspx.cs" Inherits="ProfileInfo" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
  <title>Profile Page</title>
</head>
<body>
    <form id="form1" runat="server">
    <div>
        <h3>Current Authenticated User Profile Information</h3> 
        <a href="Default.aspx">back to default page</a>
        <h4>Read Profile Information</h4>
        <table>
            <tr> <td align="left">User Name:</td>
                <td align="left">
                    <asp:Label ID="Lbl_UserName" runat="server"  Font-Bold="true"/>
                </td>
            </tr> <tr>
                <td align="left">User Roles:</td>
                <td align="left">
                    <asp:Label ID="Lbl_Roles" runat="server"  Font-Bold="true" />
                </td>
            </tr> <tr>
                <td align="left">First Name:</td>
                <td>
                    <asp:Label ID="Lbl_FirstName" runat="server"  Font-Bold="true"/>
                </td>
            </tr> <tr>
                <td align="left">Last Name:</td>
                <td>    
                    <asp:Label ID="Lbl_LastName" runat="server"  Font-Bold="true" />
                </td>
            </tr> <tr>
                <td align="left">Phone #:</td>
                <td>    
                    <asp:Label ID="Lbl_Phone" runat="server" Font-Bold="true"/>
                </td>
            </tr>
        </table>

        <asp:Button ID="But_ReadProfile" runat="server" onclick="But_ReadProfile_Click" 
            Text="Read Profile Information" />
        <hr />

        <h3>Update Profile Information </h3>

        <table>
            <tr>
                <td align="left">First Name</td>
                <td align="left"><asp:TextBox ID="TB_FirstName" runat="server"/></td>
            </tr>   <tr>
                <td align="left">Last Name</td>
                <td align="left"><asp:TextBox ID="TB_LastName" runat="server"/></td>
            </tr> <tr>
                <td align="left">Phone Number</td>
                <td align="left"><asp:TextBox ID="TB_phoneNumber" runat="server"/></td>
            </tr>
        </table>

        <asp:Button ID="But_UpdateProfile" runat="server" onclick="But_UpdateProfile_Click" 
        Text="Update Profile Data" />
    </div>
    </form>
</body>
</html>

    The Profile page contains Label controls that are used to display the user name and role, and TextBox controls that are used to change the user name and phone number.

  9. In the code-behind file for the ProfileInfo.aspx page, add the following code:

    Imports System
Imports System.Web
Imports System.Web.Security


Partial Class ProfileInfo
    Inherits System.Web.UI.Page

    Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs)

        Dim Profile As ProfileCommon = TryCast(HttpContext.Current.Profile, ProfileCommon)

        If HttpContext.Current.User.Identity.IsAuthenticated Then

            Label1.Text = HttpContext.Current.User.Identity.Name
            Dim roles As String() = _
                System.Web.Security.Roles.GetRolesForUser()

            Label2.Text = ""
            For Each r As String In roles
                Label2.Text += r + " "
            Next

            Label3.Text = Profile.FirstName()
            Label4.Text = Profile.LastName

            Label5.Text = Profile.PhoneNumber
        Else
            Label1.Text = "User is not Authenticated"
            Label1.ForeColor = System.Drawing.Color.Red
        End If
    End Sub

    Protected Sub Button2_Click(ByVal sender As Object, ByVal e As EventArgs)
        If HttpContext.Current.User.Identity.IsAuthenticated Then
            Label1.Text = HttpContext.Current.User.Identity.Name
            Dim roles As String() = _
                System.Web.Security.Roles.GetRolesForUser()
            Label2.Text = ""
            For Each r As String In roles
                Label2.Text += r + " "
            Next
            Label3.Text = Profile.FirstName
            Label4.Text = Profile.LastName
            Label5.Text = Profile.PhoneNumber
        Else
            Label1.Text = "User is not Authenticated"
            Label1.ForeColor = System.Drawing.Color.Red
        End If
    End Sub

    Protected Sub Button1_Click(ByVal sender As Object, ByVal e As EventArgs)
        If HttpContext.Current.User.Identity.IsAuthenticated Then
            Profile.FirstName = TextBox1.Text
            Profile.LastName = TextBox2.Text
            Profile.PhoneNumber = TextBox3.Text
        End If
    End Sub
End Class

    public partial class ProfileInfo : System.Web.UI.Page {
    protected void Page_Load(object sender, EventArgs e) {
        ProfileCommon Profile = HttpContext.Current.Profile   as ProfileCommon;

        if (HttpContext.Current.User.Identity.IsAuthenticated) {
            Lbl_UserName.Text = HttpContext.Current.User.Identity.Name;
            string[] roles = Roles.GetRolesForUser();
            Lbl_Roles.Text = "";
            foreach (string r in roles) {
                Lbl_Roles.Text += r + " ";
            }

            Lbl_FirstName.Text = Profile.FirstName;
            Lbl_LastName.Text = Profile.LastName;
            Lbl_Phone.Text = Profile.PhoneNumber;

        } else {
            Lbl_UserName.Text = "User is not Authenticated";
            Lbl_UserName.ForeColor = System.Drawing.Color.Red;
        }
    }

    protected void But_ReadProfile_Click(object sender, EventArgs e) {
        if (HttpContext.Current.User.Identity.IsAuthenticated) {
            Lbl_UserName.Text = HttpContext.Current.User.Identity.Name;
            string[] roles = Roles.GetRolesForUser();
            Lbl_Roles.Text = "";
            foreach (string r in roles) {
                Lbl_Roles.Text += r + " ";
            }

            Lbl_FirstName.Text = Profile.FirstName;
            Lbl_LastName.Text = Profile.LastName;
            Lbl_Phone.Text = Profile.PhoneNumber;

        } else {
            Lbl_UserName.Text = "User is not Authenticated";
            Lbl_UserName.ForeColor = System.Drawing.Color.Red;
        }
    }

    protected void But_UpdateProfile_Click(object sender, EventArgs e) {
        if (HttpContext.Current.User.Identity.IsAuthenticated) {
            Profile.FirstName = TB_FirstName.Text;
            Profile.LastName = TB_LastName.Text;
            Profile.PhoneNumber = TB_phoneNumber.Text;
        }
    }
}

    The code in this page enables you to obtain and change user profile information.

    Note

    The project will not compile until you enable profile properties for the Web site. You will do this in the next procedure.

  10. Add a page named CreateUser.aspx and add the following markup to it:

    <%@ Page Language="VB" AutoEventWireup="true" CodeFile="CreateUser.aspx.vb" Inherits="CreateUser" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head id="Head1" runat="server">
    <title>Add New User</title>
</head>
<body>
    <form id="form1" runat="server">
    <div>

        <h2>Add New User</h2>

        <a href="Default.aspx">back to default page</a>

        <asp:CreateUserWizard ID="CreateUserWizard1" runat="server"
          OnCreatedUser="On_CreatedUser">
            <wizardsteps>
                <asp:CreateUserWizardStep ID="CreateUserWizardStep1" runat="server"  />
                <asp:CompleteWizardStep ID="CompleteWizardStep1" runat="server"  />
            </wizardsteps>
        </asp:CreateUserWizard>
        <p> 
            Check the following box to assign the user to the Manager role.
            Otherwise, the user will be assigned to the friends role by default. 
        </p>
        <span style="font-weight:bold; color:Red">Manager</span> 
        <asp:CheckBox ID="CheckBox1" runat="server" />

    </div>
    </form>
</body>
</html>
Imports System
Imports System.Web
Imports System.Web.Security

Partial Public Class CreateUser
    Inherits System.Web.UI.Page
    Protected Sub Page_Load(ByVal sender As Object, ByVal e As EventArgs)

    End Sub

    Protected Sub On_CreatedUser(ByVal sender As Object, ByVal e As EventArgs)
        Dim userName As String = CreateUserWizard1.UserName
        If CheckBox1.Checked Then
            HttpContext.Current.Response.Write(userName)
            Roles.AddUserToRole(userName, "Managers")
        Else
            Roles.AddUserToRole(userName, "Friends")
        End If

        CheckBox1.Visible = False

        HttpContext.Current.Response.Redirect("~/default.aspx")
    End Sub
End Class

    <%@ Page Language="C#" AutoEventWireup="true" CodeFile="CreateUser.aspx.cs" Inherits="CreateUser" %>

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">

<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
   <title>Add New User</title>
</head>
<body>
    <form id="form1" runat="server">
    <div>

        <h2>Add New User</h2>

        <a href="Default.aspx">back to default page</a>

        <asp:CreateUserWizard ID="CreateUserWizard1" runat="server"
          OnCreatedUser="On_CreatedUser">
            <wizardsteps>
                <asp:CreateUserWizardStep ID="CreateUserWizardStep1" runat="server"  />
                <asp:CompleteWizardStep ID="CompleteWizardStep1" runat="server"  />
            </wizardsteps>
        </asp:CreateUserWizard>
        <p> 
            Check the following box to assign the user to the Managers role.
            Otherwise, the user will be assigned to the friends role by default. 
        </p>
        <span style="font-weight:bold; color:Red">Managers</span> 
        <asp:CheckBox ID="CB_manager" runat="server" />

    </div>
    </form>
</body>
</html>

    using System;
using System.Web;
using System.Web.Security;

public partial class CreateUser : System.Web.UI.Page {
    protected void Page_Load(object sender, EventArgs e) {

    }
    protected void On_CreatedUser(object sender, EventArgs e) {
        string userName = CreateUserWizard1.UserName;
        if (CB_manager.Checked) {
            HttpContext.Current.Response.Write(userName);
            Roles.AddUserToRole(userName, "Managers");
        } else
            Roles.AddUserToRole(userName, "Friends");

        CB_manager.Visible = false;

        HttpContext.Current.Response.Redirect("~/default.aspx");
    }

}

  11. In the code-behind file for the CreateUser.aspx page, add the following code:

    This page enables you to create users and assign them to a role.

The next step is to enable forms authentication, roles, and profile properties in the Web site. You do this with configuration settings in the Web.config file.

To configure authentication, roles, and profile properties

  1. Open the Web site's Web.config file.

  2. In the authentication element in the system.web section, change the default windows authentication to use forms, as shown in the following example:

    <authentication mode="Forms" />

  3. In the system.web section, configure the roles service by adding the roleManager element, as shown in the following example:

    <roleManager enabled="true"/>

  4. In the system.web section, configure the profile service through the profile section and its properties element as shown in the following example:

    <profile enabled="true">
  <properties>
    <add name="FirstName"    type="String"/>
    <add name="LastName"     type="String"/>
    <add name="PhoneNumber"  type="String"/>
  </properties>
</profile>

    This profile setting defines three properties (FirstName, LastName, and PhoneNumber) that will be managed by the ASP.NET profile service. At run time, ASP.NET will dynamically create a class of type ProfileCommon that contains these properties.

    The following example shows a part of the Web.config file that has all the required changes.

    <system.web>
<!-- Other settings. -->
<authentication mode="Forms" />
<roleManager enabled="true"/>
<profile enabled="true">
  <properties>
    <add name="FirstName"    type="String"/>
    <add name="LastName"     type="String"/>
    <add name="PhoneNumber"  type="String"/>
  </properties>
</profile>
<!-- Other settings. -->
</system.web>

You can now create user information that you will use later to log in.

To create users and assign profile information

  1. In Solution Explorer, select the Default.aspx page then press CTRL+F5 to run the page.

    The page is displayed in the browser with the following URL:

    https://localhost:8080/WcfApplicationServices/Default.aspx

  2. Click New User.

    The CreateUser.aspx page is displayed.

  3. Create some users and assign them to the predefined roles. To do this, enter the user's credentials then click Create User.

    Record the user names and passwords that you have created. You will need them to assign or change the users' profile information.

    For example, create a user that has a user name "joeM" and select the Managers radio button so that joeM is a member of the Managers role. Create a second user that has a user name "joeNA", and select the Friends radio button. The user joeNA will be a member of the Friends role but not of the Managers role. The Friends and Managers roles are created by code that you added earlier to the Application_Start method in the Global.asax file.

    After a user is created, you are redirected to the Default.aspx page.

  4. In the Default.aspx page, click Login.

    The Login.aspx page is displayed.

  5. Log in using the credentials of one of the users that you created earlier.

    If your login is successful, you are redirected to the Default.aspx page.

  6. Click Profile Information.

    The Profile.aspx page is displayed.

  7. Enter or update the profile information for the logged-in user by entering the first name, last name, and phone number.

  8. Click Update Profile Data.

  9. Click Read Profile Information.

    The information that you just entered is displayed. This step lets you make sure that profile properties are working.

  10. Return to the Default.aspx page.

  11. Log out from the user account for the user in the manager role.

  12. Log in as a user in the Friends role.

    For example, log in as joeNA.

  13. Enter profile information for the logged-in user.

You are finished creating users, roles, and profile information. You will now make this information available to client applications.

Mapping and Configuring the Application Services

You can now expose the user information that you have created by using ASP.NET application services. Before you can access the user's credential and profile information from the client, you must create mapping files (.svc) that point to the application services. This makes the services available to any application that is running on a platform that can send and receive SOAP messages. You must also configure the Web site so the application services are exposed on the network.

To create application services mapping files

  1. Add a WCF service file (.svc) to the Web site and name it MyAuthenticationSvcWrap.svc.

  2. Open the MyAuthenticationSvcWrap.svc file and replace the existing @ ServiceHost directive with the following directive, which references the System.Web.ApplicationServices.AuthenticationService class:

    <%@ ServiceHost Language="VB"
  Service="System.Web.ApplicationServices.AuthenticationService" 
    Debug="true" %>

    <%@ ServiceHost Language="C#"
  Service="System.Web.ApplicationServices.AuthenticationService" 
    Debug="true" %>

    This example service does not implement a custom authentication service. Instead, it calls (wraps) the built-in System.Web.ApplicationServices.AuthenticationService class.

  3. Delete the interface and class files for the MyAuthenticationSvcWrap service in the App_Code directory (App_Code\MyAuthenticationSvcWrap and App_Code\IMyAuthenticationSvcWrap).

    The interface and class files were created when the .svc file was added to the project. You do not need these files, because you are using the System.Web.ApplicationServices.AuthenticationService service and are not implementing a custom service.

  4. Add another WCF service file (.svc) to the Web site and name it MyRoleSvcWrap.svc.

  5. Open the MyRoleSvcWrap.svc file and replace its contents with the following @ ServiceHost directive, which creates a reference to the System.Web.ApplicationServices.RoleService class:

    <%@ ServiceHost Language="VB" 
   Service="System.Web.ApplicationServices.RoleService"    %>

    <%@ ServiceHost Language="C#" 
  Service="System.Web.ApplicationServices.RoleService"   %>

  6. In the App_Code directory, delete the interface and class files for the MyRoleSvcWrap service.

  7. Add another WCF service file (.svc) to the Web site and name it MyProfileSvcWrap.svc.

  8. Open the MyProfileSvcWrap.svc file and replace its contents with the following directive, which creates a reference to the System.Web.ApplicationServices.ProfileService class:

    <%@ ServiceHost Language="VB"
  Service="System.Web.ApplicationServices.ProfileService" 
  %>

    <%@ ServiceHost Language="C#"
Service="System.Web.ApplicationServices.ProfileService" 
%>

  9. In the App_Code directory, delete the interface and class files for the MyProfileSvcWrap service.

  10. Save and close all .svc files

  11. Build the WcfApplicationServices project to make sure that the markup, code, and configuration settings compile.

You can now configure the Web application to expose the application services.

To configure the application services

  1. Open or switch to the Web.config file.

  2. Between the configSections element and appSettings element, add a new system.web.extensions element.

  3. Add a scripting element to the system.web.extensions element.

  4. In the scripting element, enable the authentication, profile, and roles services through the webServices section.

    The following example shows the finished system.web.extensions element.

    <configSections>
  ...
</configSections>

<system.web.extensions>
  <scripting>
    <webServices>
      <authenticationService enabled="true"
       requireSSL = "false"/>
      <profileService
          enabled="true"
          readAccessProperties="FirstName,LastName,PhoneNumber"/>
      <roleService enabled="true"/>
    </webServices>
  </scripting>
</system.web.extensions>
<appSettings/>

    Note

    In a live Web site, you should set the requireSSL attribute to true.

  5. As a child of the system.serviceModel section, add a serviceHostingEnvironmentelement and set its aspNetCompatibilityEnabled attribute to true.

    The following example shows the finished serviceHostingEnvironment element.

    <runtime>
  ...
</runtime>

<system.serviceModel>
  <serviceHostingEnvironment aspNetCompatibilityEnabled="true"/>
<behaviors>
  ...
</behaviors>

  6. In the system.serviceModel group, configure the application services so that they can be accessed by client applications by using the SOAP protocol. To do this, follow these steps:

    1. In the system.serviceModel element, find the <behaviors><serviceBehaviors><behavior> element whose name attribute is MyAuthenticationSvcWrapBehavior.

    2. Change the behavior element's name attribute value from MyAuthenticationSvcWrapBehavior to AppServiceBehaviors. In this walkthrough, you configure the application to use the AppServiceBehaviors behavior for the all three services.

    3. Delete the behavior elements whose names are MyRoleSvcWrapBehavior and MyProfileSvcWrapBehavior from the <system.serviceModel><behaviors><serviceBehaviors> element.

  7. In the <system.serviceModel><services><service> element that has a behaviorConfiguration attribute whose value is MyAuthenticationSvcWrapBehavior, do the following:

    1. Change the behaviorConfiguration attribute value from MyAuthenticationSvcWrapBehavior to AppServiceBehaviors.

    2. Change the name attribute value from MyAuthenticationSvcWrap to System.Web.ApplicationServices.AuthenticationService.

  8. Configure the <service><endpoint> element by doing the following:

    1. Delete the address attribute.

    2. Change the value of the binding attribute value from wsHttpBinding to basicHttpBinding.

    3. Change the value of the contract attribute from IMyAuthenticationSvcWrap to System.Web.ApplicationServices.AuthenticationService.

    4. Add the bindingNamespace attribute and set it to https://asp.net/ApplicationServices/v200.

    5. Delete the child identity element.

    6. Delete the endpoint element whose address attribute is set to mex.

    The following example shows the markup for the authentication service element.

    <service behaviorConfiguration="AppServiceBehaviors" 
    name="System.Web.ApplicationServices.AuthenticationService">
  <endpoint binding="basicHttpBinding"  
    bindingNamespace="https://asp.net/ApplicationServices/v200"  
    contract="System.Web.ApplicationServices.AuthenticationService"/>
  </endpoint>
</service>

    For more information, see <service> element and <endpoint> element.

  9. Repeat step 7 for the service elements that have a behaviorConfiguration attribute whose values are MyRoleSvcWrapBehavior and MyProfileSvcWrapBehavior. Substitute the following values for the name and contract attributes:

    • System.Web.ApplicationServices.RoleService

    • System.Web.ApplicationServices.ProfileService

    The following example shows the complete system.serviceModel element.

    <configuration>
  ...

  <system.serviceModel>
    <serviceHostingEnvironment aspNetCompatibilityEnabled="true"/>
    <services>
      <!-- this enables the WCF AuthenticationService endpoint -->
      <service behaviorConfiguration="AppServiceBehaviors"
          name="System.Web.ApplicationServices.AuthenticationService">
        <endpoint binding="basicHttpBinding"
            bindingNamespace="https://asp.net/ApplicationServices/v200"
            contract="System.Web.ApplicationServices.AuthenticationService"/>
      </service>
      <!-- this enables the WCF RoleService endpoint -->
      <service behaviorConfiguration="AppServiceBehaviors"
          name="System.Web.ApplicationServices.RoleService">
        <endpoint binding="basicHttpBinding"
            bindingNamespace="https://asp.net/ApplicationServices/v200"
            contract="System.Web.ApplicationServices.RoleService"/>
      </service>
      <!-- this enables the WCF ProfileService endpoint -->
      <service behaviorConfiguration="AppServiceBehaviors"
          name="System.Web.ApplicationServices.ProfileService">
        <endpoint binding="basicHttpBinding"
            bindingNamespace="https://asp.net/ApplicationServices/v200"
            contract="System.Web.ApplicationServices.ProfileService"/>
      </service>
    </services>

    <behaviors>
      <serviceBehaviors>
        <behavior name="AppServiceBehaviors">
          <serviceMetadata httpGetEnabled="true"/>
          <serviceDebug includeExceptionDetailInFaults="true"/>
        </behavior>
      </serviceBehaviors>
    </behaviors>
  </system.serviceModel>
  ...
</configuration>

You can now run the Web service in order to activate the authentication, profile, and roles services that will be used by the client application. This also enables you to verify that the application service is working correctly.

To activate the Web site to expose the application services

  • In Solution Explorer, right-click the MyAuthenticationSvcWrap.svc file and then click View in Browser.

    The Web service is invoked and a page is displayed in the browser that gives you instructions for testing the service. Make a note of the service URL (the URL that ends with "?wsdl"), because you will need it in the next steps to access the service from the client application. Repeat the process for the other two service files.

You have finished configuring the application services so that they are available on the Web. The next step is to invoke these services from a client application.

Using the Application Services in a Client Application

This section shows how to create a client application in the form of a Windows console application to access the application services. The application services can be accessed by any client that can send and receive messages in SOAP format.

To create the client console application, you follow these general steps:

  • Create the client application.

  • Generate application services proxy-class files and a related app.config configuration file.

  • Add the generated proxy-class and configuration files to the client application and compile the application.

  • Call application service operations through the generated proxy classes.

    Note

    If you pass sensitive user data to the service such as authentication credentials, use the secure sockets layer (SSL, by using HTTPS protocol). For example, in the sample later in this document, you would change the value of the authenticationService element's requireSSL attribute from false to true. (However, do not do this for the walkthrough, which does not provide instructions for configuring the site to use SSL.) For more information, see Transport Security and HTTP Security and ASP.NET Web Services on the MSDN Web site, and Configuring Secure Sockets Layer in IIS 7.0 on the IIS Web site.

To create a Windows console application

  1. In Visual Studio, on the File menu, click Add and then click New Project.

  2. Select your preferred language, and then under Visual Studio installed templates, select Console Application.

  3. Name the application AppSvcClient, enter a location for the application, and then click OK.

    Visual Studio adds the project to the current solution and opens the default class file.

  4. Right-click the name of the console application and click Add Reference.

  5. In the Add Reference dialog box, click the .NET tab, select System.ServiceModel and System.Runtime.Serialization, and then click OK. If you are using Visual Basic, you must also add System.Web.Extensions.

    This adds assemblies to the project that are required in order to use the proxy classes that you will add in the next section.

Generating Proxy Classes and Configuration Information for Application Services

You can now generate proxy classes and configuration information that will enable the console application to access the application services from the AppSvcClient console application. You generate a proxy class and configuration separately for each application service.

To generate proxy classes for the application services

  1. In the Windows Start menu, click All Programs, click Microsoft Visual Studio 2008, click Visual Studio Tools, and then click Visual Studio 2008 Command Prompt.

    Note

    If you are running Windows Vista®, run this command as an Administrator.

    This opens a Windows Command window whose environment settings include the path for the .NET Framework tools.

  2. At the Windows command line, change to the directory that contains the Program.cs or Module1.vb file for the AppSvcClient project.

  3. Generate the authentication service proxy class by using the service utility tool (Svcutil.exe). Follow these steps:

    1. In Solution Explorer, right-click the MyAuthenticationSvcWrap.svc file and then click View in Browser.

    2. Copy the svcutil.exe command from the browser window.

    3. At the Windows command window that you opened in step 1, paste the command from the browser window.

    4. If you are working in Visual Basic, append /language:"VB" to the command.

    The following example shows the command.

    svcutil https://localhost:8080/WcfApplicationServices/MyAuthenticationSvcWrap.svc?wsdl /language:"VB"

    svcutil.exe https://localhost:8080/WcfApplicationServices/MyAuthenticationSvcWrap.svc?wsdl

    Note

    The default language output is C#. The flag /language:"VB" is required only for Visual Basic. The svcutil command is displayed in the browser when you view the MyAuthenticationSvcWrap.svc file.

    The value "localhost:8080" must match the URL that you use when you run the Web site from this walkthrough. If you used a different port number for the ASP.NET Development Server, or if you are using a dynamic port assignment, substitute the appropriate value. If the port number changes, you must update the .config file that is generated by the Svcutil.exe tool to match the new port number.

    The name of the .svc file in the command must match the name that you used to create the .svc file earlier in this walkthrough. Because you are not explicitly specifying a name for the generated proxy class, the name of the generated proxy class is based on the service name that is assigned in the .svc file in the Web site (AuthenticationServices).

  4. Rename the output.config configuration file that was generated by the service utility tool to App.config.

    Note

       Do not close the Windows Command window; you will generate additional proxy classes later in this walkthrough.

  5. In Solution Explorer, right-click the name of the console application, click Add, click Existing Item, select the AuthenticationService proxy class file that you generated, and then click Add.

  6. Using the same procedure as in the previous step, add the App.config file to the console application project.

  7. In the console application's main class file, add the following code to create a test.

    Imports System.ServiceModel

Module Module1

    Sub Main(ByVal args As String())


        Dim username As String = "joeM"
        Dim password As String = "*(IU89iu"
        Dim result As Boolean = False
        Dim customCredential As String = "Not Used by the default membership provider"
        Dim isPersistent As Boolean = True ' authentication ticket remains valid across sessions.

        'BasicHttpBinding and endpoint are provided in app.config file.
        Dim authService As New AuthenticationServiceClient()

        result = authService.Login(username, password, customCredential, isPersistent)

        If result Then
            Console.WriteLine("Welcome " + username + ". You have logged in.")
        Else
            Console.WriteLine("We could not validate your credentials.")
        End If

        Console.WriteLine("Enter any key to exit.")
        Console.Read()

    End Sub

End Module

    using System;
using System.Text;
using System.ServiceModel;

class Program {

    static void Main(string[] args) {

        string username = "joeM";
        string password = "*(IU89iu";
        bool result = false;

        // BasicHttpBinding and endpoint are provided in app.config file.
        AuthenticationServiceClient authService = new AuthenticationServiceClient();
        string customCredential = "Not used by the default membership provider.";

        // Authentication ticket remains valid across sessions.
        bool isPersistent = true;

        result = authService.Login(username, password, customCredential, isPersistent);

        if (result == true)
            Console.WriteLine("Welcome " + username + ". You have logged in.");
        else
            Console.WriteLine("Unable to login!");
    }
}

    The code enables you to pass a user name and password to the service when you run it from the console application. You can use values from the users and passwords that you created earlier in the walkthrough.

    The test application gets the binding and endpoint information from the App.config file.

  8. Test the project by doing the following:

    1. Change the user name and password to values that you used earlier in the walkthrough.

    2. In Solution Explorer, right-click the name of the console application (AppSvcClient) and then click Set as Startup Project.

    3. In Visual Studio, press CTRL+F5 to build and run the solution.

    The console application displays a message that states that you have logged in.

  9. Generate the profile service proxy class by doing the following:

    1. In Solution Explorer, right-click the MyProfileSvcWrap.svc file and then click View in Browser.

    2. Copy the svcutil.exe command from the browser window.

    3. At the Windows command window that you opened in step 1, paste the command from the browser window.

    4. If you are working in Visual Basic, append /language:"VB" to the command.

    5. Append the merge configuration (/mergeConfig) parameter.

    The following example shows the command.

    svcutil.exe https://localhost:8080/WcfApplicationServices/MyProfileSvcWrap.svc?wsdl /language:"VB" /config:app.config /mergeConfig

    svcutil.exe https://localhost:8080/WcfApplicationServices/MyProfileSvcWrap.svc?wsdl /language:"C#" /config:app.config /mergeConfig

    The /config:app.config option designates the App.config file as the configuration file instead of the output.config file, which is the default. The /mergeConfig option specifies that the configuration information that is generated in this step should be merged with the information that is already in the App.config file from previous steps.

  10. Generate the role service proxy class by doing the following:

    1. In Solution Explorer, right-click the MyRoleSvcWrap.svc file and then click View in Browser.

    2. Copy the svcutil.exe command from the browser window.

    3. At the Windows command window that you opened in step 1, paste the command from the browser window.

    4. If you are working in Visual Basic, append /language:"VB" to the command.

    5. Append the merge configuration (/mergeConfig) parameter.

    The following example shows the command.

    svcutil.exe https://localhost:8080/WcfApplicationServices/MyRoleSvcWrap.svc?wsdl /language:"VB" /config:app.config /mergeConfig

    svcutil.exe https://localhost:8080/WcfApplicationServices/MyRoleSvcWrap.svc?wsdl  /language:"C#" /config:app.config /mergeConfig

  11. In Solution Explorer, right-click the name of the console application, click Add, click Existing Item, select the proxy class files that you generated, and then click Add.

    The proxy classes are in the same folder as the App.config file, and are named AuthenticationService, ProfileService, and RoleService.

  12. Replace the code in the Program class with the following code:

    Imports System
Imports System.Collections.Generic
Imports System.Text
Imports System.ServiceModel
Imports System.ServiceModel.Activation
Imports System.ServiceModel.Channels
Imports System.ComponentModel
Imports System.Web
Imports System.Net

Module Module1

    Class MyServiceTst

        Dim _host As String

        Public Property Host() As String
            Get
                Return _host
            End Get
            Set(ByVal value As String)
                _host = value
            End Set
        End Property

        Function GetCookies(ByVal oc As OperationContext) As CookieContainer
            Dim httpResponseProperty As HttpResponseMessageProperty = DirectCast(oc.IncomingMessageProperties(HttpResponseMessageProperty.Name), HttpResponseMessageProperty)
            If (httpResponseProperty.Equals(Nothing) = False) Then
                Dim cookieContainer As New CookieContainer()
                Dim header As String = httpResponseProperty.Headers(HttpResponseHeader.SetCookie)

                If header <> Nothing Then
                    cookieContainer.SetCookies(New Uri("http://someuri.tld"), header)
                End If
                Return cookieContainer
            End If
            Return Nothing
        End Function

        Sub SetCookies(ByVal oc As OperationContext, ByVal cookieContainer As CookieContainer)
            Dim httpRequestProperty = New HttpRequestMessageProperty()
            httpRequestProperty = Nothing
            If oc.OutgoingMessageProperties.ContainsKey(HttpRequestMessageProperty.Name) Then
                httpRequestProperty = TryCast(oc.OutgoingMessageProperties(HttpRequestMessageProperty.Name), HttpRequestMessageProperty)
            End If
            If httpRequestProperty Is Nothing Then
                httpRequestProperty = New HttpRequestMessageProperty()
                oc.OutgoingMessageProperties.Add(HttpRequestMessageProperty.Name, httpRequestProperty)
            End If
            httpRequestProperty.Headers.Add(HttpRequestHeader.Cookie, cookieContainer.GetCookieHeader(New Uri("http://someuri.tld")))
        End Sub

        Sub GetUserRoles(ByVal cookieContainer As CookieContainer)
            Dim roleSvc As New RoleServiceClient()

            Using New OperationContextScope(DirectCast(roleSvc.InnerChannel, IContextChannel))
                SetCookies(OperationContext.Current, cookieContainer)
                Dim roles As String() = roleSvc.GetRolesForCurrentUser()
                If roles.Length = 0 Then
                    Console.WriteLine("User does not belong to any role.")
                Else
                    Dim userRoles As String = ""
                    Dim i As Integer = 0
                    While i < roles.Length
                        userRoles += roles(i) + " "
                        Global.System.Math.Max(Global.System.Threading.Interlocked.Increment(i), i - 1)
                    End While
                    Console.WriteLine("User's roles: " + userRoles)

                End If
            End Using
        End Sub

        'Sub GetProfileInfo(ByVal cookieContainer As CookieContainer)
        '    Dim profileSvc As New ProfileServiceClient()

        '    Using New OperationContextScope(DirectCast(profileSvc.InnerChannel, IContextChannel))
        '        SetCookies(OperationContext.Current, cookieContainer)
        '        Dim profileData As Dictionary(Of String, Object) = profileSvc.GetPropertiesForCurrentUser(New String() {"FirstName", "LastName", "EmployeeId"}, True)

        '        Console.WriteLine("FirstName: " + profileData("FirstName"))
        '        Console.WriteLine("LastName: " + profileData("LastName"))
        '        Console.WriteLine("EmployeeId: " + profileData("EmployeeId"))
        '    End Using
        'End Sub

        Public Function strEndPtAddr(ByVal service As String) As String
            Dim endPtAddr As String = "http://" + Host + "/WcfApplicationServices/" + service + ".svc?wsdl"

            Return endPtAddr
        End Function

        Sub Init(ByVal args As String())

            If (args.Length = 3) Then  'The host address was passed in , use that.
                Host = args(2)
            Else
                Host = "localhost:8080"  
            End If

            Dim username As String = args(0)
            Dim password As String = args(1)
            Dim result As Boolean
            Dim binding As BasicHttpBinding = New BasicHttpBinding()
            Dim endPtAddr As String = strEndPtAddr("MyAuthenSvcWrap")

            Console.WriteLine("Attempting to connect as username = " + username + vbNewLine _
              + "password length = " + password.Length.ToString() + vbNewLine _
              + " on server " + Host + vbNewLine _
              + "End point address: " + endPtAddr _
              )
            ' BasicHttpBinding and endpoint are explicitly passed and ignored
            ' in app.config file.

            Dim authService As AuthenticationServiceClient = New AuthenticationServiceClient(binding, _
                                                  New EndpointAddress(endPtAddr))

            Dim cookieContainer As CookieContainer = Nothing
            Dim customCredential As String = "Not Used by the default membership provider"
            Dim isPersistent As Boolean = True   ' authentication ticket remains valid across sessions.

            Using New OperationContextScope(authService.InnerChannel)
                Try
                    result = authService.Login(username, password, customCredential, isPersistent)
                    cookieContainer = GetCookies(OperationContext.Current)
                Catch enf As EndpointNotFoundException
                    Console.WriteLine(enf.Message)
                    Return
                End Try


            End Using

            If result Then
                Console.WriteLine("Welcome " + username + ". You have logged in.")

                GetProfileInfo(cookieContainer)
                GetUserRoles(cookieContainer)
            Else
                Console.WriteLine("We could not validate your credentials.")
            End If


        End Sub
    End Class



    Sub Main(ByVal args As String())

        If (args.Length < 1) Then
            Console.WriteLine("missing args username password")
            Return
        End If

        Dim mst As MyServiceTst = New MyServiceTst()
        mst.Init(args)


        Console.WriteLine("Enter any key to exit.")
        Console.Read()

    End Sub

End Module

    using System;
using System.Collections.Generic;
using System.Text;
using System.ServiceModel;
using System.ServiceModel.Activation;
using System.ServiceModel.Channels;
using System.ComponentModel;
using System.Web;
using System.Net;


class MyServiceTst {

    string Host { get; set; }      

    CookieContainer GetCookies(OperationContext oc) {
        HttpResponseMessageProperty httpResponseProperty =
            (HttpResponseMessageProperty)oc.IncomingMessageProperties[HttpResponseMessageProperty.Name];
        if (httpResponseProperty != null) {
            CookieContainer cookieContainer = new CookieContainer();
            string header = httpResponseProperty.Headers[HttpResponseHeader.SetCookie];

            if (header != null) {
                cookieContainer.SetCookies(new Uri(@"http://someuri.tld"), header);
            }
            return cookieContainer;
        }
        return null;
    }

    void SetCookies(OperationContext oc, CookieContainer cookieContainer) {

        HttpRequestMessageProperty httpRequestProperty = null;
        if (oc.OutgoingMessageProperties.ContainsKey(HttpRequestMessageProperty.Name)) {
            httpRequestProperty =
                oc.OutgoingMessageProperties[HttpRequestMessageProperty.Name]
                as HttpRequestMessageProperty;
        }

        if (httpRequestProperty == null) {
            httpRequestProperty = new HttpRequestMessageProperty();
            oc.OutgoingMessageProperties.Add(HttpRequestMessageProperty.Name,
                httpRequestProperty);
        }
        httpRequestProperty.Headers.Add(HttpRequestHeader.Cookie,
            cookieContainer.GetCookieHeader(new Uri(@"http://someuri.tld")));
    }


    void GetUserRoles(CookieContainer cookieContainer) {

        string endPtAddr = strEndPtAddr("MyRoleSvcWrap");

        RoleServiceClient roleSvc = new RoleServiceClient(new BasicHttpBinding(),
             new EndpointAddress(endPtAddr));

        using (new OperationContextScope((IContextChannel)roleSvc.InnerChannel)) {
            SetCookies(OperationContext.Current, cookieContainer);
            string[] roles = roleSvc.GetRolesForCurrentUser();
            if (roles.Length == 0) {
                Console.WriteLine("User does not belong to any role.");
            } else {
                string userRoles = "";
                for (int i = 0; i < roles.Length; i++) {
                    userRoles += roles[i] + " ";
                }
                Console.WriteLine("User's roles: " + userRoles);
            }

        }
    }

    void GetProfileInfo(CookieContainer cookieContainer) {

        string endPtAddr = strEndPtAddr("MyProfileSvcWrap");

        ProfileServiceClient profileSvc = new ProfileServiceClient(new BasicHttpBinding(),
             new EndpointAddress(endPtAddr));

        string[] strProfileProps = new string[] { "FirstName", "LastName", "PhoneNumber" };

        using (new OperationContextScope((IContextChannel)profileSvc.InnerChannel)) {
            SetCookies(OperationContext.Current, cookieContainer);
            Dictionary<string, object> profileData =
                profileSvc.GetPropertiesForCurrentUser(strProfileProps, true);

            foreach (string sProp in strProfileProps)
                Console.WriteLine(sProp + ": " + profileData[sProp]);

        }
    }

    public string strEndPtAddr(string service) {

        string endPtAddr = @"http://" + Host + "/WcfApplicationServices/"
            + service + ".svc?wsdl";

        return endPtAddr;
    }

    public  MyServiceTst(string[] args) {

        if (args.Length == 3)   // The host address was passed in , use that.
            Host = args[2];
        else
            Host = "localhost:8080";  

        string username = args[0];
        string password = args[1];
        bool result = false;
        BasicHttpBinding binding = new BasicHttpBinding();
        string endPtAddr = strEndPtAddr("MyAuthenSvcWrap");

        Console.WriteLine("Attempting to connect as username = " + username
            + "\n password length = " + password.Length.ToString()
            + "\n on server " + Host + "\n"
            + "\n" + endPtAddr
        );

        // BasicHttpBinding and endpoint are explicitly passed and ignored
        // in app.config file.

        AuthenticationServiceClient authService = new AuthenticationServiceClient(binding,
                                                     new EndpointAddress(endPtAddr));

        CookieContainer cookieContainer;
        string customCredential = "Not Used by the default membership provider";
        // Authentication ticket remains valid across sessions.
        bool isPersistent = true;  

        using (new OperationContextScope(authService.InnerChannel)) {
            try {
                result = authService.Login(username, password,
                                             customCredential, isPersistent);
                cookieContainer = GetCookies(OperationContext.Current);
            } catch (EndpointNotFoundException enfe) {
                Console.WriteLine(enfe.Message);
                if (enfe.InnerException != null && enfe.InnerException.Message != null)
                    Console.WriteLine(enfe.InnerException.Message);
                return;
            }
        }

        if (result) {
            Console.WriteLine("Welcome " + username + ". You have logged in.");

            GetUserRoles(cookieContainer);
            GetProfileInfo(cookieContainer);
        } else {
            Console.WriteLine("We could not validate your credentials.");
        }

    }
}

class Program {

    static void Main(string[] args) {

        if (args.Length < 1) {
            Console.WriteLine("missing args username password [host]");
            return;
        }
        MyServiceTst mst = new MyServiceTst(args);

        Console.WriteLine("Enter any key to exit.");
        Console.Read();
    }

}

  13. Build the project.

Accessing the Application Services

You can now run the client application and use the application services that you have exposed as part of the Web site.

To run the Windows application

  1. At the Windows command prompt, change to the console application directory.

  2. Enter the following command, using the user name and password of one of the users that you created earlier in the walkthrough:

    AppSvcClient.exe <userName> <password>

    If you entered the correct credentials, you will be authenticated and will be able to obtain roles and profile information that is associated with the logged-in user.

Deploying the Application Services Web Site on Windows Server 2008

In order to run the application in a production environment, you can copy the Web site to a computer that is running Windows Server 2008 and then access the Web service from a client.

Note

This procedure assumes that you are familiar with Windows 2008 server administration tasks and with using IIS Manager to manage Web applications.

To run the Web application on Windows Server 2008

  1. On the computer that is running Windows Server 2008, verify that the Web Server Role is installed on the server and the ASP.NET Role Service.

  2. Verify that Microsoft SQL Server Express Edition installed is installed.

    Note

    SQL Server Express Edition is not recommended for production systems.

  3. Copy the WcfApplicationServices directory and its subdirectories to the server.

  4. Using IIS Manager, add a virtual directory at the root of the Web site and give it the alias WcfApplicationServices.

  5. Set the WcfApplicationServices physical path to the path of the WcfApplicationServices directory from the previous step.

  6. Convert the WcfApplicationServices virtual directory into an application.

  7. In Windows Explorer, open the WcfApplicationServices directory.

  8. Delete the SQL Server Express Edition log file (aspnetdb_log.ldf), which is in the App_Data folder of the Web site.

  9. Right-click the WcfApplicationServices\App_Data directory, click Properties, and then click the Security tab.

  10. Click Edit.

    The Permissions dialog box for the App_Data folder is displayed.

  11. Click Add.

    The Select Users, Computers, or Groups dialog box is displayed

  12. Verify that the local server computer is listed under From this location type. If the server is not listed, click Location and then select the local server.

  13. In the text box, enter NETWORK SERVICE.

  14. Close the dialog boxes that you have opened.

    The default application pool runs under the NETWORK SERVICE account. This account needs permission to create the SQL log file and to make changes to the aspnetdb.mdf file.

  15. On a different computer that has access to the server, open a browser and request the Default.aspx page in the Web application.

  16. Log in to one of the accounts that you created earlier in the walkthrough to verify that the application is working.

  17. On the server computer, run the ServiceModel registration tool (ServiceModelReg.exe) to register the service. From an elevated command prompt, enter the following command:

    ServiceModelReg.exe -i

    This registers the service model and updates the scriptmaps on IIS to expose the service.

  18. On the client computer, run the following AppSvcClient.exe command, passing a user name and password, and passing the server as the third argument:

    AppSvcClient.exe <userName> <password> <server>

    You see the same output from AppSvcClient.exe as in the previous step.

    If the AppSvcClient program returns an error, compare the URL parameter passed to AppSvcClient with the URL that is displayed by Svcutil.exe when you browse to WcfApplicationServices/MyAuthenticationSvcWrap.svc. For example, if the server computer name is bp0, enter the following URL in the browser:

    http://bp0/WcfApplicationServices/MyAuthenticationSvcWrap.svc

    The instructions to test the service include the URL that is required by the client application.

Next Steps

This walkthrough has illustrated the basic principles of accessing the ASP.NET application services from a client application that can send and receive messages in SOAP format.

You might want to experiment with additional application service features. Suggestions for additional exploration include the following:

  • Learn more about how to use application services from .NET Framework clients. For more information, see Client Application Services Overview.

  • Learn more about the Windows Communication Foundation (WCF) and about data exchange with the client in SOAP format. For more information, see XML Web Services Infrastructure on the MSDN Web site.

For general information about Web services, you might want to do following:

  • Understand how to use Web services. For more information, see XML Web Service Scenarios.

  • Learn more about ASP.NET application services. For more information, see AuthenticationServiceLogin().

  • Understand the processing that occurs when you make a Web service call. For more information, see Anatomy of an XML Web Service Lifetime.

See Also

Tasks

Walkthrough: Creating a Web Site with Membership and User Login

How to: Enable the WCF Authentication Service

How to: Enable the WCF Role Service

How to: Enable the WCF Profile Service

Concepts

Defining ASP.NET Profile Properties

ASP.NET Application Services Overview

Reference

How to: Enable the WCF Role Serviced

Other Resources

Bindings and Security