Codec API Properties
| Microsoft DirectShow 9.0 |
Codec API Properties
Common Audio Properties
These properties apply to both audio encoders and audio decoders.
| Property | Description |
| AVAudioChannelConfig | Specifies the speaker configuration for the audio channels in the audio bit stream. |
| AVAudioChannelCount | Specifies the number of channels in the audio bit stream. |
| AVAudioSampleRate | Specifies the sample rate of the audio bit stream, in samples per seconds. |
| AVDDSurroundMode | Specifies whether the audio is encoded in Dolby Surround. |
Common Decoder Properties
These properties apply to both audio decoders and video decoders.
| Property | Description |
| AVDecCommonInputFormat | Specifies the current input format for the decoder. |
| AVDecCommonOutputFormat | Specifies the output format for the decoder. |
| AVDecMmcssClass | Specifies the Multimedia Class Scheduler Service (MMCSS) class for the decoding thread. |
Video Decoder Properties
| Property | Description |
| AVDecVideoImageSize | Specifies the size of the decoded video stream. |
| AVDecVideoInputScanType | Specifies how the decoded video stream is interlaced. |
| AVDecVideoPixelAspectRatio | Specifies the pixel aspect ratio of the decoded video stream. |
Audio Decoder Properties
| Property | Description |
| AVDecAudioDualMono | Specifies whether 2-channel audio is encoded as stereo or dual mono. |
| AVDecAudioDualMonoReproMode | Specifies how the decoder reproduces dual mono audio. |
Dolby Digital Audio Decoder Properties
| Property | Description |
| AVDecDDDynamicRangeScaleHigh | Specifies the high-level cut when the decoder performs dynamic range control. |
| AVDecDDDynamicRangeScaleLow | Specifies the low-level boost when the decoder performs dynamic range control. |
| AVDecDDOperationalMode | Specifies the compression control mode. |
Common Encoder Properties
These properties apply to both audio encoders and video encoders.
| Property | Description |
| AVEncCodecType | Specifies the encoding scheme. |
| AVEncCommonBufferInLevel | Specifies the initial level of the encoding buffer. |
| AVEncCommonBufferOutLevel | Specifies the final level of the encoding buffer at the end of the encoding process. |
| AVEncCommonBufferSize | Specifies the size of the buffer used during encoding. |
| AVEncCommonFormatConstraint | Specifies the target format for an encoder. |
| AVEncCommonLowLatency | Specifies whether the output stream should be structured so that the encoded stream has a low decoding latency. |
| AVEncCommonMaxBitRate | Specifies the maximum bit rate. |
| AVEncCommonMeanBitRate | Specifies the average bit rate. |
| AVEncCommonMeanBitRateInterval | Specifies the time interval over which the average bit rate applies. |
| AVEncCommonMinBitRate | Specifies the minimum bit rate. |
| AVEncCommonMultipassMode | Specifies the number of encoding passes that the encoder supports. |
| AVEncCommonPassEnd | Stops the current encoding pass, or queries whether the current encoding pass is the last one. |
| AVEncCommonPassStart | Starts the first encoding pass. |
| AVEncCommonQuality | Specifies the quality level for encoding. |
| AVEncCommonQualityVsSpeed | Specifies the tradeoff between encoding quality and speed. |
| AVEncCommonRateControlMode | Specifies the rate control mode. |
| AVEncCommonRealTime | Specifies whether the application requires real-time encoding performance. |
| AVEncCommonStreamEndHandling | Specifies whether the encoder discards partial groups of pictures (GOPs) at the end of the stream. |
| AVEncStatCommonCompletedPasses | Specifies the number of completed encoding passes. |
Video Encoder Properties
| Property | Description |
| AVEncInputVideoSystem | Specifies the video system of the source content. |
| AVEncStatVideoCodedFrames | Returns the number of video frames that were encoded. |
| AVEncStatVideoOutputFrameRate | Returns the average frame rate of the video content. |
| AVEncStatVideoTotalFrames | Returns the number of video frames that the encoder received. |
| AVEncVideoCBRMotionTradeoff | Specifies the tradeoff between motion and still images. |
| AVEncVideoCodedVideoAccessUnitSize | Specifies the size of the video access units. |
| AVEncVideoDefaultUpperFieldDominant | Specifies which field is displayed first. |
| AVEncVideoDisplayDimension | Specifies the size of the video stream when it is decoded. |
| AVEncVideoEncodeDimension | Specifies the width and height of the encoded video, if the video is cropped. |
| AVEncVideoEncodeOffsetOrigin | Specifies the left and top corners of the clipping rectangle, if the video is cropped. |
| AVEncVideoFieldSwap | Reverses the order of the interlaced fields in the source video. |
| AVEncVideoForceSourceScanType | Specifies whether the input frames are progressive or interlaced. |
| AVEncVideoHeaderDropFrame | Specifies the value of drop-frame flag in the GOP header. |
| AVEncVideoHeaderFrames | Specifies the starting frame number in the GOP header. |
| AVEncVideoHeaderHours | Specifies the starting hour number in the GOP header. |
| AVEncVideoHeaderMinutes | Specifies the starting minute number in the GOP header. |
| AVEncVideoHeaderSeconds | Specifies the starting second number in the GOP header. |
| AVEncVideoInputChromaResolution | Specifies the chroma resolution of the input video. |
| AVEncVideoInputChromaSubsampling | Specifies the chroma siting for the input video. |
| AVEncVideoInputColorLighting | Specifies the intended lighting conditions for viewing the input video. |
| AVEncVideoInputColorNominalRange | Specifies the nominal range for the input video. |
| AVEncVideoInputColorPrimaries | Specifies the color primaries for the input video. |
| AVEncVideoInputColorTransferFunction | Specifies the conversion function from RGB to R'G'B' for input video |
| AVEncVideoInputColorTransferMatrix | Specifies the conversion matrix from the Y'Cb'Cr' color space to the R'G'B' color space, for the input video. |
| AVEncVideoInverseTelecineEnable | Specifies whether the encoder performs inverse telecine. |
| AVEncVideoInverseTelecineThreshold | Sets the threshold at which the encoder considers a video field redundant. |
| AVEncVideoMaxKeyframeDistance | Specifies the maximum number of frames between key frames. |
| AVEncVideoNoOfFieldsToEncode | Specifies the number of fields to encode. |
| AVEncVideoNoOfFieldsToSkip | Specifies the number of fields to skip during encoding. |
| AVEncVideoOutputChromaResolution | Specifies the chroma resolution of the encoded video. |
| AVEncVideoOutputChromaSubsampling | Specifies the chroma siting for the encoded video. |
| AVEncVideoOutputColorLighting | Specifies the intended lighting conditions for viewing the encoded video. |
| AVEncVideoOutputColorNominalRange | Specifies the nominal range for the encoded video. |
| AVEncVideoOutputColorPrimaries | Specifies the color primaries for the encoded video. |
| AVEncVideoOutputColorTransferFunction | Specifies the conversion function from RGB to R'G'B' for encoded video. |
| AVEncVideoOutputColorTransferMatrix | Specifies the conversion matrix from the Y'Cb'Cr' color space to the R'G'B' color space, for the encoded video. |
| AVEncVideoOutputFrameRate | Specifies the frame rate on the encoder's output stream, in frames per second. |
| AVEncVideoOutputFrameRateConversion | Specifies whether the encoder converts the frame rate when the output frame rate does not match the input frame rate. |
| AVEncVideoOutputScanType | Specifies how the encoder interlaces the output video. |
| AVEncVideoPixelAspectRatio | Specifies the pixel aspect ratio. |
| AVEncVideoSourceFilmContent | Specifies whether the original source of the input video was film or video. |
| AVEncVideoSourceIsBW | Specifies whether the video is monochrome (black and white) or contains color. |
Audio Encoder Properties
| Property | Description |
| AVEncAudioDualMono | Specifies whether 2-channel audio is encoded as stereo or dual mono. |
| AVEncAudioInputContent | Specifies whether the audio content contains music or voice. |
| AVEncAudioIntervalToEncode | Specifies the number of audio samples to encode. |
| AVEncAudioIntervalToSkip | Specifies the number of audio samples for the encoder to skip. |
| AVEncAudioMapDestChannelN | Specifies which audio channel is mapped to channel N in the encoded audio stream. |
| AVEncStatAudioAverageBPS | Returns the average bits per second of the encoded audio. |
| AVEncStatAudioAveragePCMValue | Returns the average volume level of the audio content. |
| AVEncStatAudioPeakPCMValue | Returns the highest volume level that was present in the audio content. |
MPEG Video Encoder Properties
| Property | Description |
| AVEncMPVAddSeqEndCode | Specifies whether the encoder adds a sequence end code at the end of the stream. |
| AVEncMPVDefaultBPictureCount | Specifies the default number of consecutive B frames between I and P frames. |
| AVEncMPVFrameFieldMode | Specifies whether the encoder produces encoded fields or encoded frames. |
| AVEncMPVGenerateHeaderPicDispExt | Specifies whether the encoder generates picture display extension headers. |
| AVEncMPVGenerateHeaderPicExt | Specifies whether the encoder generates picture extension headers. |
| AVEncMPVGenerateHeaderSeqDispExt | Specifies whether the encoder generates sequence display extension headers. |
| AVEncMPVGenerateHeaderSeqExt | Specifies whether the encoder generates sequence extension headers. |
| AVEncMPVGenerateHeaderSeqScaleExt | Specifies whether the encoder generates sequence scalable extension headers. |
| AVEncMPVGOPOpen | Specifies whether the encoder produces open GOPs or closed GOPs. |
| AVEncMPVGOPSInSeq | Specifies the number of GOPs between sequence headers. |
| AVEncMPVGOPSize | Specifies the maximum number of pictures from one GOP header to the next GOP header. |
| AVEncMPVIntraDCPrecision | Specifies the precision of the DC coefficients. |
| AVEncMPVIntraVLCTable | Specifies which variable-length coding (VLC) table to use for entropy coding. |
| AVEncMPVLevel | Specifies the MPEG-2 level. |
| AVEncMPVProfile | Specifies the MPEG-2 profile. |
| AVEncMPVQScaleType | Specifies whether the quantizer scale is linear or non-linear. |
| AVEncMPVQuantMatrixChromaIntra | Specifies the chroma quantization matrix for intra macroblocks. |
| AVEncMPVQuantMatrixChromaNonIntra | Specifies the chroma quantization matrix for non-intra macroblocks. |
| AVEncMPVQuantMatrixIntra | Specifies the luma quantization matrix for intra macroblocks. |
| AVEncMPVQuantMatrixNonIntra | Specifies the luma quantization matrix for non-intra macroblocks. |
| AVEncMPVScanPattern | Specifies the macroblock scan pattern. |
| AVEncMPVSceneDetection | Specifies how the encoder behaves when it detects a new scene. |
| AVEncMPVUseConcealmentMotionVectors | Specifies whether the encoder uses concealment motion vectors. |
MPEG Audio Encoder Properties
| Property | Description |
| AVEncMPACodingMode | Specifies the MPEG-1 audio encoding mode. |
| AVEncMPACopyright | Specifies the default setting for the copyright bit. |
| AVEncMPAEmphasisType | Specifies the type of de-emphasis filter that should be used when decoding. |
| AVEncMPAEnableRedundancyProtection | Specifies whether to add a cyclic redundancy check (CRC) to the frame header. |
| AVEncMPALayer | Specifies the MPEG audio layer. |
| AVEncMPAOriginalBitstream | Specifies the default setting for the original bit. |
| AVEncMPAPrivateUserBit | Sets the value of the private user bit. |
Dolby Digital Audio Encoder Properties
| Property | Description |
| AVEncDDAtoDConverterType | Specifies the type of analog-to-digital (A/D) conversion. |
| AVEncDDCentreDownMixLevel | Specifies the center downmix level. |
| AVEncDDChannelBWLowPassFilter | Specifies whether a low pass filter is applied to the main input channels. |
| AVEncDDCopyright | Specifies the copyright flag. |
| AVEncDDDCHighPassFilter | Specifies whether a DC-blocking high pass filter is applied. |
| AVEncDDDialogNormalization | Specifies the dialog normalization level. |
| AVEncDDDigitalDeemphasis | Specifies whether digital de-emphasis. |
| AVEncDDDynamicRangeCompressionControl | Specifies the dynamic range control profile. |
| AVEncDDHeadphoneMode | Specifies the headphone mode. |
| AVEncDDLFELowPassFilter | Specifies whether a low pass filter is applied to the low frequency effect (LFE) channel. |
| AVEncDDLoRoCenterMixLvl_x10 | Specifies the level shift that is applied to the center channel for Lo/Ro downmixing. |
| AVEncDDLoRoSurroundMixLvl_x10 | Specifies the level shift that is applied to the Surround channels for Lo/Ro downmixing. |
| AVEncDDLtRtCenterMixLvl_x10 | Specifies the level shift that is applied to the center channel for Lt/Rt downmixing. |
| AVEncDDLtRtSurroundMixLvl_x10 | Specifies the level shift that is applied to the Surround channels for Lt/Rt downmixing. |
| AVEncDDOriginalBitstream | Specifies the original bitstream flag. |
| AVEncDDPreferredStereoDownMixMode | Specifies the preferred stereo downmix mode. |
| AVEncDDProductionInfoExists | Specifies the audio production information flag. |
| AVEncDDProductionMixLevel | Specifies the mixing level. |
| AVEncDDProductionRoomType | Specifies the room type. |
| AVEncDDRFPreEmphasisFilter | Specifies the RF overmodulation protection setting. |
| AVEncDDService | Specifies the audio service. |
| AVEncDDSurround3dBAttenuation | Specifies whether the Surround channels are attenuated before encoding. |
| AVEncDDSurround90DegreeePhaseShift | Specifies whether a 90-degree phase shift is applied to the Surround channels. |
| AVEncDDSurroundDownMixLevel | Specifies the Surround down mix level. |
| AVEncDDSurroundExMode | Specifies whether the audio stream is encoded in Surround EX. |
See Also