Vorgehensweise: Hochladen inkrementeller Datenänderungen auf einen Server
In diesem Thema wird erläutert, wie Sie inkrementelle Datenänderungen von einer SQL Server Compact-Clientdatenbank auf eine Serverdatenbank hochladen können. Die Beispiele in diesem Thema beziehen sich auf die folgenden Sync Framework-Typen und -Ereignisse:
Informationen zum Ausführen von Beispielcode finden Sie unter "Beispielanwendungen in den Themen zur Vorgehensweise" in Programmieren von allgemeinen Client- und Serversynchronisierungsaufgaben.
Beispiel
Der Beispielcode in diesem Thema zeigt die Konfiguration der Nur-Upload-Synchronisierung für die Customer-Tabelle aus der Sync Framework-Beispieldatenbank. Eine Übersicht über die Eigenschaften, die zur Angabe der Synchronisierungsrichtung verwendet werden, finden Sie unter Vorgehensweise: Angeben der Synchronisierungsart (Momentaufnahmen-, Nur-Download-, Nur-Upload- oder bidirektionale Synchronisierung).
Für die Nur-Upload-Synchronisierung müssen die inkrementellen Datenänderungen in der Clientdatenbank nachverfolgt und für die Serverdatenbank übernommen werden. Die Nachverfolgung in der Clientdatenbank wird von Sync Framework gesteuert. Ihre Aufgabe ist es, die Befehle anzugeben, mit denen Änderungen für die Serverdatenbank übernommen werden (siehe dazu den Beispielcode).
Schlüsselbestandteile der API
In diesem Abschnitt finden Sie Codebeispiele für die Schlüsselbestandteile der API, die für die Nur-Upload-Synchronisierung verwendet werden. Das folgende Codebeispiel gibt die Synchronisierungsrichtung an und legt fest, wie die Tabelle auf dem Client erstellt werden soll.
SyncTable customerSyncTable = new SyncTable("Customer");
customerSyncTable.CreationOption = TableCreationOption.DropExistingOrCreateNewTable;
customerSyncTable.SyncDirection = SyncDirection.UploadOnly;
customerSyncTable.SyncGroup = customerSyncGroup;
this.Configuration.SyncTables.Add(customerSyncTable);
Dim customerSyncTable As New SyncTable("Customer")
customerSyncTable.CreationOption = TableCreationOption.DropExistingOrCreateNewTable
customerSyncTable.SyncDirection = SyncDirection.UploadOnly
customerSyncTable.SyncGroup = customerSyncGroup
Me.Configuration.SyncTables.Add(customerSyncTable)
Das folgende Codebeispiel gibt einen Befehl zum Abrufen eines neuen Ankerwerts vom Server an. In diesem Fall wird ein Timestampwert abgerufen und in der Clientdatenbank gespeichert. Bei jeder Synchronisierungssitzung wird durch Hinzuziehung des Ankerwerts sichergestellt, dass hochgeladene Änderungen nicht die Änderungen auf dem Server überschreiben, die seit der letzten Synchronisierungssitzung vorgenommen wurden.
SqlCommand selectNewAnchorCommand = new SqlCommand();
string newAnchorVariable = "@" + SyncSession.SyncNewReceivedAnchor;
selectNewAnchorCommand.CommandText =
"SELECT " + newAnchorVariable + " = min_active_rowversion() - 1";
selectNewAnchorCommand.Parameters.Add(newAnchorVariable, SqlDbType.Timestamp);
selectNewAnchorCommand.Parameters[newAnchorVariable].Direction = ParameterDirection.Output;
selectNewAnchorCommand.Connection = serverConn;
this.SelectNewAnchorCommand = selectNewAnchorCommand;
Dim selectNewAnchorCommand As New SqlCommand()
Dim newAnchorVariable As String = "@" + SyncSession.SyncNewReceivedAnchor
With selectNewAnchorCommand
.CommandText = "SELECT " + newAnchorVariable + " = min_active_rowversion() - 1"
.Parameters.Add(newAnchorVariable, SqlDbType.Timestamp)
.Parameters(newAnchorVariable).Direction = ParameterDirection.Output
.Connection = serverConn
End With
Me.SelectNewAnchorCommand = selectNewAnchorCommand
Das folgende Codebeispiel gibt einen Befehl an, mit dem das Schema von der Serverdatenbank abgerufen wird. Im Unterschied zu anderen Synchronisierungsarten ruft dieser Befehl bei Nur-Upload-Synchronisierungen keine Daten aus der Serverdatenbank ab.
SqlCommand customerIncrInserts = new SqlCommand();
customerIncrInserts.CommandText =
"SELECT CustomerId, CustomerName, SalesPerson, CustomerType " +
"FROM Sales.Customer";
customerIncrInserts.Connection = serverConn;
customerSyncAdapter.SelectIncrementalInsertsCommand = customerIncrInserts;
Dim customerIncrInserts As New SqlCommand()
With customerIncrInserts
.CommandText = _
"SELECT CustomerId, CustomerName, SalesPerson, CustomerType " _
& "FROM Sales.Customer"
.Connection = serverConn
End With
customerSyncAdapter.SelectIncrementalInsertsCommand = customerIncrInserts
Das folgende Codebeispiel gibt einen Befehl an, mit dem die Aktualisierungen vom Client für den Server übernommen werden. Dabei handelt es sich um eine UPDATE-Anweisung, die die Spalten einschließt, die aktualisiert werden sollen. Sie enthält die Client-ID und eine WHERE-Klausel, die auf den Ankerwert zurückgreift, der den SelectNewAnchorCommand abruft. Die WHERE-Klausel enthält auch den @sync_force_write = 1-Parameter. Dieser Parameter erzwingt die Übernahme sich widersprechender Aktualisierungen. Weitere Informationen zu @sync_force_write und den anderen Sitzungsvariablen finden Sie unter Vorgehensweise: Verwenden von Sitzungsvariablen.
SqlCommand customerUpdates = new SqlCommand();
customerUpdates.CommandText =
"UPDATE Sales.Customer SET " +
"CustomerName = @CustomerName, SalesPerson = @SalesPerson, " +
"CustomerType = @CustomerType, " +
"UpdateId = @sync_client_id " +
"WHERE (CustomerId = @CustomerId) " +
"AND (@sync_force_write = 1 " +
"OR (UpdateTimestamp <= @sync_last_received_anchor " +
"OR UpdateId = @sync_client_id)) " +
"SET @sync_row_count = @@rowcount";
customerUpdates.Parameters.Add("@CustomerName", SqlDbType.NVarChar);
customerUpdates.Parameters.Add("@SalesPerson", SqlDbType.NVarChar);
customerUpdates.Parameters.Add("@CustomerType", SqlDbType.NVarChar);
customerUpdates.Parameters.Add("@" + SyncSession.SyncClientId, SqlDbType.UniqueIdentifier);
customerUpdates.Parameters.Add("@CustomerId", SqlDbType.UniqueIdentifier);
customerUpdates.Parameters.Add("@" + SyncSession.SyncForceWrite, SqlDbType.Bit);
customerUpdates.Parameters.Add("@" + SyncSession.SyncLastReceivedAnchor, SqlDbType.Timestamp);
customerUpdates.Parameters.Add("@" + SyncSession.SyncRowCount, SqlDbType.Int);
customerUpdates.Connection = serverConn;
customerSyncAdapter.UpdateCommand = customerUpdates;
Dim customerUpdates As New SqlCommand()
With customerUpdates
.CommandText = _
"UPDATE Sales.Customer SET " _
& "CustomerName = @CustomerName, SalesPerson = @SalesPerson, " _
& "CustomerType = @CustomerType, " _
& "UpdateId = @sync_client_id " _
& "WHERE (CustomerId = @CustomerId) " _
& "AND (@sync_force_write = 1 " _
& "OR (UpdateTimestamp <= @sync_last_received_anchor " _
& "OR UpdateId = @sync_client_id)) " _
& "SET @sync_row_count = @@rowcount"
.Parameters.Add("@CustomerName", SqlDbType.NVarChar)
.Parameters.Add("@SalesPerson", SqlDbType.NVarChar)
.Parameters.Add("@CustomerType", SqlDbType.NVarChar)
.Parameters.Add("@" + SyncSession.SyncClientId, SqlDbType.UniqueIdentifier)
.Parameters.Add("@CustomerId", SqlDbType.UniqueIdentifier)
.Parameters.Add("@" + SyncSession.SyncForceWrite, SqlDbType.Bit)
.Parameters.Add("@" + SyncSession.SyncLastReceivedAnchor, SqlDbType.Timestamp)
.Parameters.Add("@" + SyncSession.SyncRowCount, SqlDbType.Int)
.Connection = serverConn
End With
customerSyncAdapter.UpdateCommand = customerUpdates
Vollständiges Codebeispiel
Das folgende vollständige Codebeispiel enthält die Codebeispiele, die weiter oben beschrieben wurden, sowie zusätzlichen Code zum Ausführen der Synchronisierung. Achten Sie auch darauf, wie mithilfe von SyncStatistics Informationen zur Synchronisierungssitzung angezeigt werden und wie die Ereignisse CreatingSchema und SchemaCreated zum Hinzufügen eines Standards für die CustomerId-Spalte genutzt werden. Für das Beispiel wird die in 'Utility'-Klasse für Datenbankanbieter - Themen zur Vorgehensweise enthaltene Utility-Klasse benötigt.
using System;
using System.IO;
using System.Text;
using System.Data;
using System.Data.SqlClient;
using System.Data.SqlServerCe;
using Microsoft.Synchronization;
using Microsoft.Synchronization.Data;
using Microsoft.Synchronization.Data.Server;
using Microsoft.Synchronization.Data.SqlServerCe;
namespace Microsoft.Samples.Synchronization
{
class Program
{
static void Main(string[] args)
{
//The SampleStats class handles information from the SyncStatistics
//object that the Synchronize method returns.
SampleStats sampleStats = new SampleStats();
//Request a password for the client database, and delete
//and re-create the database. The client synchronization
//provider also enables you to create the client database
//if it does not exist.
Utility.SetPassword_SqlCeClientSync();
Utility.DeleteAndRecreateCompactDatabase(Utility.ConnStr_SqlCeClientSync, true);
//Initial synchronization. Instantiate the SyncAgent
//and call Synchronize.
SampleSyncAgent sampleSyncAgent = new SampleSyncAgent();
SyncStatistics syncStatistics = sampleSyncAgent.Synchronize();
sampleStats.DisplayStats(syncStatistics, "initial");
//Make changes on the client.
Utility.MakeDataChangesOnClient("Customer");
//Subsequent synchronization.
syncStatistics = sampleSyncAgent.Synchronize();
sampleStats.DisplayStats(syncStatistics, "subsequent");
//Return server data back to its original state.
Utility.CleanUpServer();
//Exit.
Console.Write("\nPress Enter to close the window.");
Console.ReadLine();
}
}
//Create a class that is derived from
//Microsoft.Synchronization.SyncAgent.
public class SampleSyncAgent : SyncAgent
{
public SampleSyncAgent()
{
//Instantiate a client synchronization provider and specify it
//as the local provider for this synchronization agent.
this.LocalProvider = new SampleClientSyncProvider();
//Instantiate a server synchronization provider and specify it
//as the remote provider for this synchronization agent.
this.RemoteProvider = new SampleServerSyncProvider();
//Create a Customer SyncGroup. This is not required
//for the single table that we are synchronizing. It is typically
//used so that changes to multiple related tables are
//synchronized at the same time.
SyncGroup customerSyncGroup = new SyncGroup("Customer");
//Add the Customer table: specify a synchronization direction of
//UploadOnly, and that an existing table should be dropped.
SyncTable customerSyncTable = new SyncTable("Customer");
customerSyncTable.CreationOption = TableCreationOption.DropExistingOrCreateNewTable;
customerSyncTable.SyncDirection = SyncDirection.UploadOnly;
customerSyncTable.SyncGroup = customerSyncGroup;
this.Configuration.SyncTables.Add(customerSyncTable);
}
}
//Create a class that is derived from
//Microsoft.Synchronization.Server.DbServerSyncProvider.
public class SampleServerSyncProvider : DbServerSyncProvider
{
public SampleServerSyncProvider()
{
//Create a connection to the sample server database.
Utility util = new Utility();
SqlConnection serverConn = new SqlConnection(Utility.ConnStr_DbServerSync);
this.Connection = serverConn;
//Create a command to retrieve a new anchor value from
//the server. In this case, we use a timestamp value
//that is retrieved and stored in the client database.
//During each synchronization, the new anchor value and
//the last anchor value from the previous synchronization
//are used: the set of changes between these upper and
//lower bounds is synchronized.
//
//SyncSession.SyncNewReceivedAnchor is a string constant;
//you could also use @sync_new_received_anchor directly in
//your queries.
SqlCommand selectNewAnchorCommand = new SqlCommand();
string newAnchorVariable = "@" + SyncSession.SyncNewReceivedAnchor;
selectNewAnchorCommand.CommandText =
"SELECT " + newAnchorVariable + " = min_active_rowversion() - 1";
selectNewAnchorCommand.Parameters.Add(newAnchorVariable, SqlDbType.Timestamp);
selectNewAnchorCommand.Parameters[newAnchorVariable].Direction = ParameterDirection.Output;
selectNewAnchorCommand.Connection = serverConn;
this.SelectNewAnchorCommand = selectNewAnchorCommand;
//Create a SyncAdapter for the Customer table, and then define
//the commands to synchronize changes:
//* SelectIncrementalInsertsCommand is used to get the schema
// from the server.
//* InsertCommand, UpdateCommand, and DeleteCommand are used to apply
// to the server the changes that the client provider has selected
// from the client.
//Create the SyncAdapter.
SyncAdapter customerSyncAdapter = new SyncAdapter("Customer");
//Get the schema from the server.
SqlCommand customerIncrInserts = new SqlCommand();
customerIncrInserts.CommandText =
"SELECT CustomerId, CustomerName, SalesPerson, CustomerType " +
"FROM Sales.Customer";
customerIncrInserts.Connection = serverConn;
customerSyncAdapter.SelectIncrementalInsertsCommand = customerIncrInserts;
//Apply inserts to the server.
SqlCommand customerInserts = new SqlCommand();
customerInserts.CommandText =
"INSERT INTO Sales.Customer (CustomerId, CustomerName, SalesPerson, CustomerType, InsertId, UpdateId) " +
"VALUES (@CustomerId, @CustomerName, @SalesPerson, @CustomerType, @sync_client_id, @sync_client_id) " +
"SET @sync_row_count = @@rowcount";
customerInserts.Parameters.Add("@CustomerId", SqlDbType.UniqueIdentifier);
customerInserts.Parameters.Add("@CustomerName", SqlDbType.NVarChar);
customerInserts.Parameters.Add("@SalesPerson", SqlDbType.NVarChar);
customerInserts.Parameters.Add("@CustomerType", SqlDbType.NVarChar);
customerInserts.Parameters.Add("@" + SyncSession.SyncClientId, SqlDbType.UniqueIdentifier);
customerInserts.Parameters.Add("@" + SyncSession.SyncRowCount, SqlDbType.Int);
customerInserts.Connection = serverConn;
customerSyncAdapter.InsertCommand = customerInserts;
//Apply updates to the server.
SqlCommand customerUpdates = new SqlCommand();
customerUpdates.CommandText =
"UPDATE Sales.Customer SET " +
"CustomerName = @CustomerName, SalesPerson = @SalesPerson, " +
"CustomerType = @CustomerType, " +
"UpdateId = @sync_client_id " +
"WHERE (CustomerId = @CustomerId) " +
"AND (@sync_force_write = 1 " +
"OR (UpdateTimestamp <= @sync_last_received_anchor " +
"OR UpdateId = @sync_client_id)) " +
"SET @sync_row_count = @@rowcount";
customerUpdates.Parameters.Add("@CustomerName", SqlDbType.NVarChar);
customerUpdates.Parameters.Add("@SalesPerson", SqlDbType.NVarChar);
customerUpdates.Parameters.Add("@CustomerType", SqlDbType.NVarChar);
customerUpdates.Parameters.Add("@" + SyncSession.SyncClientId, SqlDbType.UniqueIdentifier);
customerUpdates.Parameters.Add("@CustomerId", SqlDbType.UniqueIdentifier);
customerUpdates.Parameters.Add("@" + SyncSession.SyncForceWrite, SqlDbType.Bit);
customerUpdates.Parameters.Add("@" + SyncSession.SyncLastReceivedAnchor, SqlDbType.Timestamp);
customerUpdates.Parameters.Add("@" + SyncSession.SyncRowCount, SqlDbType.Int);
customerUpdates.Connection = serverConn;
customerSyncAdapter.UpdateCommand = customerUpdates;
//Apply deletes to the server.
SqlCommand customerDeletes = new SqlCommand();
customerDeletes.CommandText =
"DELETE FROM Sales.Customer " +
"WHERE (CustomerId = @CustomerId) " +
"AND (@sync_force_write = 1 " +
"OR (UpdateTimestamp <= @sync_last_received_anchor " +
"OR UpdateId = @sync_client_id)) " +
"SET @sync_row_count = @@rowcount " +
"IF (@sync_row_count > 0) BEGIN " +
"UPDATE Sales.Customer_Tombstone " +
"SET DeleteId = @sync_client_id " +
"WHERE (CustomerId = @CustomerId) " +
"END";
customerDeletes.Parameters.Add("@CustomerId", SqlDbType.UniqueIdentifier);
customerDeletes.Parameters.Add("@" + SyncSession.SyncForceWrite, SqlDbType.Bit);
customerDeletes.Parameters.Add("@" + SyncSession.SyncLastReceivedAnchor, SqlDbType.Timestamp);
customerDeletes.Parameters.Add("@" + SyncSession.SyncClientId, SqlDbType.UniqueIdentifier);
customerDeletes.Parameters.Add("@" + SyncSession.SyncRowCount, SqlDbType.Int);
customerDeletes.Connection = serverConn;
customerSyncAdapter.DeleteCommand = customerDeletes;
//Add the SyncAdapter to the server synchronization provider.
this.SyncAdapters.Add(customerSyncAdapter);
}
}
//Create a class that is derived from
//Microsoft.Synchronization.Data.SqlServerCe.SqlCeClientSyncProvider.
//You can just instantiate the provider directly and associate it
//with the SyncAgent, but here we use this class to handle client
//provider events.
public class SampleClientSyncProvider : SqlCeClientSyncProvider
{
public SampleClientSyncProvider()
{
//Specify a connection string for the sample client database.
Utility util = new Utility();
this.ConnectionString = Utility.ConnStr_SqlCeClientSync;
//We use the CreatingSchema event to change the schema
//by using the API. We use the SchemaCreated event to
//change the schema by using SQL.
this.CreatingSchema += new EventHandler<CreatingSchemaEventArgs>(SampleClientSyncProvider_CreatingSchema);
this.SchemaCreated += new EventHandler<SchemaCreatedEventArgs>(SampleClientSyncProvider_SchemaCreated);
}
private void SampleClientSyncProvider_CreatingSchema(object sender, CreatingSchemaEventArgs e)
{
//Set the RowGuid property because it is not copied
//to the client by default. This is also a good time
//to specify literal defaults with .Columns[ColName].DefaultValue,
//but we will specify defaults like NEWID() by calling
//ALTER TABLE after the table is created.
Console.Write("Creating schema for " + e.Table.TableName + " | ");
e.Schema.Tables["Customer"].Columns["CustomerId"].RowGuid = true;
}
private void SampleClientSyncProvider_SchemaCreated(object sender, SchemaCreatedEventArgs e)
{
//Call ALTER TABLE on the client. This must be done
//over the same connection and within the same
//transaction that Sync Framework uses
//to create the schema on the client.
Utility util = new Utility();
Utility.MakeSchemaChangesOnClient(e.Connection, e.Transaction, e.Table.TableName);
Console.WriteLine("Schema created for " + e.Table.TableName);
}
}
//Handle the statistics that are returned by the SyncAgent.
public class SampleStats
{
public void DisplayStats(SyncStatistics syncStatistics, string syncType)
{
Console.WriteLine(String.Empty);
if (syncType == "initial")
{
Console.WriteLine("****** Initial Synchronization ******");
}
else if (syncType == "subsequent")
{
Console.WriteLine("***** Subsequent Synchronization ****");
}
Console.WriteLine("Start Time: " + syncStatistics.SyncStartTime);
Console.WriteLine("Total Changes Uploaded: " + syncStatistics.TotalChangesUploaded);
Console.WriteLine("Total Changes Downloaded: " + syncStatistics.TotalChangesDownloaded);
Console.WriteLine("Complete Time: " + syncStatistics.SyncCompleteTime);
Console.WriteLine(String.Empty);
}
}
}
Imports System
Imports System.IO
Imports System.Text
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlServerCe
Imports Microsoft.Synchronization
Imports Microsoft.Synchronization.Data
Imports Microsoft.Synchronization.Data.Server
Imports Microsoft.Synchronization.Data.SqlServerCe
Class Program
Shared Sub Main(ByVal args() As String)
'The SampleStats class handles information from the SyncStatistics
'object that the Synchronize method returns.
Dim sampleStats As New SampleStats()
'Request a password for the client database, and delete
'and re-create the database. The client synchronization
'provider also enables you to create the client database
'if it does not exist.
Utility.SetPassword_SqlCeClientSync()
Utility.DeleteAndRecreateCompactDatabase(Utility.ConnStr_SqlCeClientSync, True)
'Initial synchronization. Instantiate the SyncAgent
'and call Synchronize.
Dim sampleSyncAgent As New SampleSyncAgent()
Dim syncStatistics As SyncStatistics = sampleSyncAgent.Synchronize()
sampleStats.DisplayStats(syncStatistics, "initial")
'Make changes on the client.
Utility.MakeDataChangesOnClient("Customer")
'Subsequent synchronization.
syncStatistics = sampleSyncAgent.Synchronize()
sampleStats.DisplayStats(syncStatistics, "subsequent")
'Return server data back to its original state.
Utility.CleanUpServer()
'Exit.
Console.Write(vbLf + "Press Enter to close the window.")
Console.ReadLine()
End Sub 'Main
End Class 'Program
'Create a class that is derived from
'Microsoft.Synchronization.SyncAgent.
Public Class SampleSyncAgent
Inherits SyncAgent
Public Sub New()
'Instantiate a client synchronization provider and specify it
'as the local provider for this synchronization agent.
Me.LocalProvider = New SampleClientSyncProvider()
'Instantiate a server synchronization provider and specify it
'as the remote provider for this synchronization agent.
Me.RemoteProvider = New SampleServerSyncProvider()
'Create a Customer SyncGroup. This is not required
'for the single table that we are synchronizing. It is typically
'used so that changes to multiple related tables are
'synchronized at the same time.
Dim customerSyncGroup As New SyncGroup("Customer")
'Add the Customer table: specify a synchronization direction of
'UploadOnly, and that an existing table should be dropped.
Dim customerSyncTable As New SyncTable("Customer")
customerSyncTable.CreationOption = TableCreationOption.DropExistingOrCreateNewTable
customerSyncTable.SyncDirection = SyncDirection.UploadOnly
customerSyncTable.SyncGroup = customerSyncGroup
Me.Configuration.SyncTables.Add(customerSyncTable)
End Sub 'New
End Class 'SampleSyncAgent
'Create a class that is derived from
'Microsoft.Synchronization.Server.DbServerSyncProvider.
Public Class SampleServerSyncProvider
Inherits DbServerSyncProvider
Public Sub New()
'Create a connection to the sample server database.
Dim util As New Utility()
Dim serverConn As New SqlConnection(Utility.ConnStr_DbServerSync)
Me.Connection = serverConn
'Create a command to retrieve a new anchor value from
'the server. In this case, we use a timestamp value
'that is retrieved and stored in the client database.
'During each synchronization, the new anchor value and
'the last anchor value from the previous synchronization
'are used: the set of changes between these upper and
'lower bounds is synchronized.
'
'SyncSession.SyncNewReceivedAnchor is a string constant;
'you could also use @sync_new_received_anchor directly in
'your queries.
Dim selectNewAnchorCommand As New SqlCommand()
Dim newAnchorVariable As String = "@" + SyncSession.SyncNewReceivedAnchor
With selectNewAnchorCommand
.CommandText = "SELECT " + newAnchorVariable + " = min_active_rowversion() - 1"
.Parameters.Add(newAnchorVariable, SqlDbType.Timestamp)
.Parameters(newAnchorVariable).Direction = ParameterDirection.Output
.Connection = serverConn
End With
Me.SelectNewAnchorCommand = selectNewAnchorCommand
'Create a SyncAdapter for the Customer table, and then define
'the commands to synchronize changes:
'* SelectIncrementalInsertsCommand is used to get the schema
' from the server.
'* InsertCommand, UpdateCommand, and DeleteCommand are used to apply
' to the server the changes that the client provider has selected
' from the client.
'Create the SyncAdapter.
Dim customerSyncAdapter As New SyncAdapter("Customer")
'Get the schema from the server.
Dim customerIncrInserts As New SqlCommand()
With customerIncrInserts
.CommandText = _
"SELECT CustomerId, CustomerName, SalesPerson, CustomerType " _
& "FROM Sales.Customer"
.Connection = serverConn
End With
customerSyncAdapter.SelectIncrementalInsertsCommand = customerIncrInserts
'Apply inserts to the server.
Dim customerInserts As New SqlCommand()
With customerInserts
.CommandText = _
"INSERT INTO Sales.Customer (CustomerId, CustomerName, SalesPerson, CustomerType, InsertId, UpdateId) " _
& "VALUES (@CustomerId, @CustomerName, @SalesPerson, @CustomerType, @sync_client_id, @sync_client_id) " _
& "SET @sync_row_count = @@rowcount"
.Parameters.Add("@CustomerId", SqlDbType.UniqueIdentifier)
.Parameters.Add("@CustomerName", SqlDbType.NVarChar)
.Parameters.Add("@SalesPerson", SqlDbType.NVarChar)
.Parameters.Add("@CustomerType", SqlDbType.NVarChar)
.Parameters.Add("@" + SyncSession.SyncClientId, SqlDbType.UniqueIdentifier)
.Parameters.Add("@" + SyncSession.SyncRowCount, SqlDbType.Int)
.Connection = serverConn
End With
customerSyncAdapter.InsertCommand = customerInserts
'Apply updates to the server.
Dim customerUpdates As New SqlCommand()
With customerUpdates
.CommandText = _
"UPDATE Sales.Customer SET " _
& "CustomerName = @CustomerName, SalesPerson = @SalesPerson, " _
& "CustomerType = @CustomerType, " _
& "UpdateId = @sync_client_id " _
& "WHERE (CustomerId = @CustomerId) " _
& "AND (@sync_force_write = 1 " _
& "OR (UpdateTimestamp <= @sync_last_received_anchor " _
& "OR UpdateId = @sync_client_id)) " _
& "SET @sync_row_count = @@rowcount"
.Parameters.Add("@CustomerName", SqlDbType.NVarChar)
.Parameters.Add("@SalesPerson", SqlDbType.NVarChar)
.Parameters.Add("@CustomerType", SqlDbType.NVarChar)
.Parameters.Add("@" + SyncSession.SyncClientId, SqlDbType.UniqueIdentifier)
.Parameters.Add("@CustomerId", SqlDbType.UniqueIdentifier)
.Parameters.Add("@" + SyncSession.SyncForceWrite, SqlDbType.Bit)
.Parameters.Add("@" + SyncSession.SyncLastReceivedAnchor, SqlDbType.Timestamp)
.Parameters.Add("@" + SyncSession.SyncRowCount, SqlDbType.Int)
.Connection = serverConn
End With
customerSyncAdapter.UpdateCommand = customerUpdates
'Apply deletes to the server.
Dim customerDeletes As New SqlCommand()
With customerDeletes
.CommandText = _
"DELETE FROM Sales.Customer " _
& "WHERE (CustomerId = @CustomerId) " _
& "AND (@sync_force_write = 1 " _
& "OR (UpdateTimestamp <= @sync_last_received_anchor " _
& "OR UpdateId = @sync_client_id)) " _
& "SET @sync_row_count = @@rowcount " _
& "IF (@sync_row_count > 0) BEGIN " _
& "UPDATE Sales.Customer_Tombstone " _
& "SET DeleteId = @sync_client_id " _
& "WHERE (CustomerId = @CustomerId) " _
& "END"
.Parameters.Add("@CustomerId", SqlDbType.UniqueIdentifier)
.Parameters.Add("@" + SyncSession.SyncForceWrite, SqlDbType.Bit)
.Parameters.Add("@" + SyncSession.SyncLastReceivedAnchor, SqlDbType.Timestamp)
.Parameters.Add("@" + SyncSession.SyncClientId, SqlDbType.UniqueIdentifier)
.Parameters.Add("@" + SyncSession.SyncRowCount, SqlDbType.Int)
.Connection = serverConn
End With
customerSyncAdapter.DeleteCommand = customerDeletes
'Add the SyncAdapter to the server synchronization provider.
Me.SyncAdapters.Add(customerSyncAdapter)
End Sub 'New
End Class 'SampleServerSyncProvider
'Create a class that is derived from
'Microsoft.Synchronization.Data.SqlServerCe.SqlCeClientSyncProvider.
'You can just instantiate the provider directly and associate it
'with the SyncAgent, but here we use this class to handle client
'provider events.
Public Class SampleClientSyncProvider
Inherits SqlCeClientSyncProvider
Public Sub New()
'Specify a connection string for the sample client database.
Dim util As New Utility()
Me.ConnectionString = Utility.ConnStr_SqlCeClientSync
'We use the CreatingSchema event to change the schema
'by using the API. We use the SchemaCreated event to
'change the schema by using SQL.
AddHandler Me.CreatingSchema, AddressOf SampleClientSyncProvider_CreatingSchema
AddHandler Me.SchemaCreated, AddressOf SampleClientSyncProvider_SchemaCreated
End Sub 'New
Private Sub SampleClientSyncProvider_CreatingSchema(ByVal sender As Object, ByVal e As CreatingSchemaEventArgs)
'Set the RowGuid property because it is not copied
'to the client by default. This is also a good time
'to specify literal defaults with .Columns[ColName].DefaultValue,
'but we will specify defaults like NEWID() by calling
'ALTER TABLE after the table is created.
Console.Write("Creating schema for " + e.Table.TableName + " | ")
e.Schema.Tables("Customer").Columns("CustomerId").RowGuid = True
End Sub 'SampleClientSyncProvider_CreatingSchema
Private Sub SampleClientSyncProvider_SchemaCreated(ByVal sender As Object, ByVal e As SchemaCreatedEventArgs)
'Call ALTER TABLE on the client. This must be done
'over the same connection and within the same
'transaction that Sync Framework uses
'to create the schema on the client.
Dim util As New Utility()
Utility.MakeSchemaChangesOnClient(e.Connection, e.Transaction, e.Table.TableName)
Console.WriteLine("Schema created for " + e.Table.TableName)
End Sub 'SampleClientSyncProvider_SchemaCreated
End Class 'SampleClientSyncProvider
'Handle the statistics that are returned by the SyncAgent.
Public Class SampleStats
Public Sub DisplayStats(ByVal syncStatistics As SyncStatistics, ByVal syncType As String)
Console.WriteLine(String.Empty)
If syncType = "initial" Then
Console.WriteLine("****** Initial Synchronization ******")
ElseIf syncType = "subsequent" Then
Console.WriteLine("***** Subsequent Synchronization ****")
End If
Console.WriteLine("Start Time: " & syncStatistics.SyncStartTime)
Console.WriteLine("Total Changes Uploaded: " & syncStatistics.TotalChangesUploaded)
Console.WriteLine("Total Changes Downloaded: " & syncStatistics.TotalChangesDownloaded)
Console.WriteLine("Complete Time: " & syncStatistics.SyncCompleteTime)
Console.WriteLine(String.Empty)
End Sub 'DisplayStats
End Class 'SampleStats
Siehe auch
Konzepte
Architektur und Klassen für die Client- und Serversynchronisierung
Vorgehensweise: Angeben der Synchronisierungsart (Momentaufnahmen-, Nur-Download-, Nur-Upload- oder bidirektionale Synchronisierung)