Freigeben über


Doskey

Calls Doskey.exe, which recalls Windows XP commands, edits command lines, and creates macros.

Syntax

doskey {/reinstall | **/listsize=**size | /macros:[{all | exename}] | /history | /insert | /overstrike | **/exename=**exename | /macrofile=FileName | macroname=[text]}

Parameters

/reinstall   : Installs a new copy of Doskey.exe. Clears the command history buffer.

/listsize= size   : Specifies the maximum number of commands in the history buffer.

/macros : Displays a list of all doskey macros. You can use a redirection symbol (>) with /macros to redirect the list to a file. You can abbreviate /macros to /m.

all   : Displays doskey macros for all executables.

exename   : Displays doskey macros for the specified executable.

/history   : Displays all commands stored in memory. You can use a redirection symbol (>) with /history to redirect the list to a file. You can abbreviate /history as /h.

{ /insert | /overstrike } : Specifies whether new text you type is to replace old text. If you use /insert, new text that you type on a line is inserted into old text (that is, as if you pressed the INSERT key). If you use /overstrike, new text replaces old text. The default setting is /overstrike.

/exename= exename   : Specifies the program (that is, executable) in which the doskey macro runs.

/macrofile= FileName   : Specifies a file containing macros that you want to install.

macroname = [ text ] : Creates a macro that carries out the commands specified by text. Macroname specifies the name you want to assign to the macro. Text specifies the commands you want to record. If text is left blank, macroname is cleared of any assigned commands.

/?   : Displays help at the command prompt.

Remarks

  • Using Doskey.exe

    Doskey.exe is always available for all character-based, interactive programs (such as program debuggers or file transfer programs), and maintains a command history buffer and macros for each program that it starts. You cannot use doskey command-line options from a program. You must run doskey command-line options before you start a program. Program key assignments override doskey key assignments.

  • Recalling a command

    To recall a command, you can use any of the following keys after starting Doskey.exe. If you use Doskey.exe within a program, that program's key assignments take precedence.

    Key

    Description

    UP ARROW

    Recalls the command you used before the one displayed.

    DOWN ARROW

    Recalls the command you used after the one displayed.

    PAGE UP

    Recalls the oldest command you used in the current session.

    PAGE DOWN

    Recalls the most recent command you used.

  • Editing the command line

    With Doskey.exe, you can edit the current command line. If you use Doskey.exe within a program, that program's key assignments take precedence and some Doskey.exe editing keys might not work.

    The following table lists doskey editing keys and their functions.

    Key or key combination

    Description

    LEFT ARROW

    Moves the insertion point back one character.

    RIGHT ARROW

    Moves the insertion point forward one character.

    CTRL+LEFT ARROW

    Moves the insertion point back one word.

    CTRL+RIGHT ARROW

    Moves the insertion point forward one word.

    HOME

    Moves the insertion point to the beginning of the line.

    END

    Moves the insertion point to the end of the line.

    ESC

    Clears the command from the display.

    F1

    Copies one character from the same column in the template to the same column in the Command Prompt window. (The template is a memory buffer that holds the last command you typed.)

    F2

    Searches forward in the template for the next key you type after pressing F2. Doskey.exe inserts the text from the template up to, but not including, the character you specify.

    F3

    Copies the remainder of the template to the command line. Doskey.exe begins copying characters from the position in the template that corresponds to the position indicated by the insertion point on the command line.

    F4

    Deletes characters from the current insertion point position up to a character you specify. To use this editing key, press F4 and type a character. Doskey.exe deletes the characters from the current insertion point position to the first letter specified.

    F5

    Copies the template into the current command line.

    F6

    Places an end-of-file character (that is, CTRL+Z) at the current insertion point position.

    F7

    Displays all commands for this program stored in memory in a pop-up box. Use the UP ARROW key and the DOWN ARROW key to select the command you want, and press ENTER to run the command. You can also note the sequential number in front of the command and use this number in conjunction with the F9 key.

    ALT+F7

    Deletes all commands stored in memory for the current history buffer.

    F8

    Displays all commands in the history buffer that start with the characters in the current command.

    F9

    Prompts you for a history buffer command number, then displays the command associated with the number you specify. Press ENTER to run the command. To display all the numbers and their associated commands, press F7.

    ALT+F10

    Deletes all macro definitions.

  • Using doskey within a program

    Certain character-based, interactive programs, such as program debuggers or file transfer programs (FTP), automatically use Doskey.exe. To use Doskey.exe, a program must be a console process and use buffered input. Program key assignments override doskey key assignments. For example, if the program uses the F7 key for some function, you cannot get a doskey command history in a pop-up window.

    With Doskey.exe you can maintain a command history for each program you start, repeat and edit previous commands at the program's prompt, and start doskey macros created for the program. If you exit and then restart a program from the same Command Prompt window, the command history from the previous program session is available.

    You must run Doskey.exe before you start a program. You cannot use doskey command-line options from a program's command prompt, even if the program has a shell command.

    If you want to customize how Doskey.exe works with a program and create doskey macros for that program, you can create a batch program that modifies Doskey.exe and starts the program.

  • Specifying a default insert mode

    If you press the INSERT key, you can type text on the doskey command line in the middle of old text without replacing the old text. However, after you press ENTER, Doskey.exe returns your keyboard to replace mode. You must press INSERT again to return to insert mode.

    Use /insert to switch your keyboard to insert mode each time you press ENTER. Your keyboard effectively remains in insert mode until you use /overstrike. You can temporarily return to replace mode by pressing the INSERT key, but after you press ENTER, Doskey.exe returns your keyboard to insert mode.

    The insertion point changes shape when you use the INSERT key to change from one mode to the other.

  • Creating a macro

    You can use Doskey.exe to create macros that carry out one or more commands. The following table lists special characters you can use to control command operations when you define a macro.

    Character

    Description

    $G or $g

    Redirects output. Use either of these special characters to send output to a device or a file instead of to the screen. This character is equivalent to the redirection symbol for output (>).

    $G$G or $g$g

    Appends output to the end of a file. Use either of these special double characters to append output to an existing file instead of replacing the data in the file. These double characters are equivalent to the append redirection symbol for output (>>).

    $L or $l

    Redirects input. Use either of these special characters to read input from a device or a file instead of from the keyboard. This character is equivalent to the redirection symbol for input (<).

    $B or $b

    Sends macro output to a command. These special characters are equivalent to using the pipe (|) on a command line.

    $T or $t

    Separates commands. Use either of these special characters to separate commands when you create macros or type commands on the doskey command line. These special characters are equivalent to using the ampersand (&) on a command line.

    $$

    Specifies the dollar-sign character ($).

    $1 through $9

    Represent any command-line information you want to specify when you run the macro. The special characters $1 through $9 are batch parameters, which make it possible for you to use different data on the command line each time you run the macro. The $1 character in a doskey command is similar to the %1 character in a batch program.

    $*

    Represents all the command-line information you want to specify when you type the macro name. The special character $* is a replaceable parameter that is similar to the batch parameters $1 through $9, with one important difference: everything you type on the command line after the macro name is substituted for the $* in the macro.

  • Running a doskey macro

    To run a macro, type the macro name starting at the first position on the command line. If the macro was defined with $* or any of the batch parameters $1 through $9, use a white space to separate parameters. You cannot run a doskey macro from a batch program.

  • Creating a macro with the same name as a Windows XP command

    If you always use a particular command with specific command-line options, you can create a macro that has the same name as the command. To specify whether you want to run the macro or the command, follow these guidelines:

    • To run the macro, begin typing the macro name immediately after the command prompt, with no space between the prompt and the command name.

    • To run the command, insert one or more white spaces between the command prompt and the command name.

  • Deleting a macro

    To delete a macro, type:

    doskey macroname =

Examples

The /macros and /history command-line options are useful for creating batch programs to save macros and commands. For example, to store all current doskey macros, type:

doskey /macros > macinit

To use the macros stored in Macinit, type:

doskey /macrofile=macinit

To create a batch program named Tmp.bat that contains recently used commands, type:

doskey /history > tmp.bat

To define a macro with multiple commands, use $t to separate commands, as follows:

doskey tx=cd temp$tdir/w $*

In the preceding example, the TX macro changes the current directory to Temp and then displays a directory listing in wide display format. You can use $* at the end of the macro to append other command-line options to dir when you run TX.

The following macro uses a batch parameter for a new directory name:

doskey mc=md $1$tcd $1

The macro creates a new directory and then changes to it from the current directory.

To use the preceding macro to create and change to a directory named Books, type:

mc books

To create a doskey macro for a program called Ftp.exe, include /exename as follows:

doskey /exename:ftp.exe go=open 10.127.1.100$tmget *.TXT c:\reports$bye

To use the preceding macro, start ftp. At the ftp prompt, type:

go

Ftp runs the open, mget, and bye commands.

To create a macro that performs a quick and unconditional format of a disk, type:

doskey qf=format $1 /q /u

To format a disk in drive A quickly and unconditionally, type:

qf a:

Formatting legend

Format

Meaning

Italic

Information that the user must supply

Bold

Elements that the user must type exactly as shown

Ellipsis (...)

Parameter that can be repeated several times in a command line

Between brackets ([])

Optional items

Between braces ({}); choices separated by pipe (|). Example: {even|odd}

Set of choices from which the user must choose only one

Courier font

Code or program output

Format

Command-line reference A-Z