Set-DhcpServerv6StatelessStore
Set-DhcpServerv6StatelessStore
Sets the properties of IPv6 stateless store for the specified IPv6 prefix.
Syntax
Parameter Set: Set1
Set-DhcpServerv6StatelessStore [[-Prefix] <IPAddress> ] [[-Enabled] <Boolean> ] [[-PurgeInterval] <TimeSpan> ] [-AsJob] [-CimSession <CimSession[]> ] [-ComputerName <String> ] [-PassThru] [-ThrottleLimit <Int32> ] [-Confirm] [-WhatIf] [ <CommonParameters>]
Detailed Description
The Set-DhcpServerv6StatelessStore cmdlet sets the properties of IPv6 stateless store for the specified IPv6 prefix. If the Prefix parameter is not specified, then the properties of the IPv6 stateless store at the server level are set.
Parameters
-AsJob
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-CimSession<CimSession[]>
Runs the cmdlet in a remote session or on a remote computer. Enter a computer name or a session object, such as the output of a New-CimSession or Get-CimSession cmdlet. The default is the current session on the local computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-ComputerName<String>
Specifies the DNS name, or IPv4 or IPv6 address, of the target computer running the Dynamic Host Configuration Protocol (DHCP) server service.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Enabled<Boolean>
Specifies the enabled state for the stateless store. The acceptable values for this parameter are: True or False.
Aliases |
none |
Required? |
false |
Position? |
2 |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
false |
-PassThru
Returns an object representing the item with which you are working. By default, this cmdlet does not generate any output.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Prefix<IPAddress>
Specifies the IPv6 subnet prefix of the scope for which the stateless store properties are set.
Aliases |
none |
Required? |
false |
Position? |
1 |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
false |
-PurgeInterval<TimeSpan>
Specifies the purge interval for the stateless store. If the DHCP client does not send a DHCPv6 information request, or a request for options, in this interval, then the DHCP client is assumed to no longer exist on that subnet and the stateless store entry for the client is purged by the DHCP server service.
This parameter value can be configured in the dd.hh
format. If minutes or seconds, using the dd.hh:mm:ss
format, are specified, then the minutes and seconds will be ignored.
Aliases |
none |
Required? |
false |
Position? |
3 |
Default Value |
none |
Accept Pipeline Input? |
true (ByPropertyName) |
Accept Wildcard Characters? |
false |
-ThrottleLimit<Int32>
Specifies the maximum number of concurrent operations that can be established to run the cmdlet. If this parameter is omitted or a value of 0
is entered, then Windows PowerShell® calculates an optimum throttle limit for the cmdlet based on the number of CIM cmdlets that are running on the computer. The throttle limit applies only to the current cmdlet, not to the session or to the computer.
Aliases |
none |
Required? |
false |
Position? |
named |
Default Value |
none |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-Confirm
Prompts you for confirmation before running the cmdlet.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
-WhatIf
Shows what would happen if the cmdlet runs. The cmdlet is not run.
Required? |
false |
Position? |
named |
Default Value |
false |
Accept Pipeline Input? |
false |
Accept Wildcard Characters? |
false |
<CommonParameters>
This cmdlet supports the common parameters: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer, and -OutVariable. For more information, see about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Inputs
The input type is the type of the objects that you can pipe to the cmdlet.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6Scope
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6StatelessStore
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Outputs
The output type is the type of the objects that the cmdlet emits.
Microsoft.Management.Infrastructure.CimInstance#root/Microsoft/Windows/DHCP/DhcpServerv6StatelessStore
The
Microsoft.Management.Infrastructure.CimInstance
object is a wrapper class that displays Windows Management Instrumentation (WMI) objects. The path after the pound sign (#
) provides the namespace and class name for the underlying WMI object.
Examples
EXAMPLE 1
This example enables the DHCPv6 stateless store for the scope 2001:4898:7020:1020:: and sets the purge interval for stateless client entries to 1 day.
PS C:\> Set-DhcpServerv6StatelessStore -ComputerName dhcpserver.contoso.com -Prefix 2001:4898:7020:1020:: -Enabled True -PurgeInterval 2.00:00:00
EXAMPLE 2
This example enables DHCPv6 stateless store at the server level and sets the purge interval for stateless client entries to 1 day.
PS C:\> Set-DhcpServerv6StatelessStore -ComputerName dhcpserver.contoso.com -Enabled True -PurgeInterval 1.00:00:00