Add-NetworkControllerNode
Add-NetworkControllerNode
Adds a network controller node to an existing network controller deployment.
Syntax
Parameter Set: Default
Add-NetworkControllerNode -FaultDomain <String> -Name <String> -RestInterface <String> -Server <String> [-CertificateThumbprint <String> ] [-ComputerName <String> ] [-Credential <PSCredential> ] [-Force] [-NodeCertificate <X509Certificate2> ] [-PassThru] [-UseSsl] [-Confirm] [-WhatIf] [ <CommonParameters>]
Detaillierte Beschreibung
The Add-NetworkControllerNode cmdlet adds a network controller node to an existing network controller deployment. If the existing computers in the deployment are not able to handle the load, this cmdlet can be used to scale up an existing deployment. A two node deployment is not supported. Therefore, if you are on a single node cluster and want to scale up, you must add at least two nodes to gain the benefits of high availability.
Parameter
-CertificateThumbprint<String>
Specifies the digital public key X.509 certificate of a user account that has permission to perform this action. Specify this parameter only if you run this cmdlet on a computer that is not part of the network controller cluster.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-ComputerName<String>
Specifies the name of the network controller node on which this cmdlet operates.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-Credential<PSCredential>
Specifies a user credential that has permission to perform this action. The default is the current user. Specify this parameter only if you run this cmdlet on a computer that is not part of the network controller cluster.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-FaultDomain<String>
Specifies the servers that are likely to experience failure at the same time due to shared physical dependencies such as power and networking sources. Fault domains typically represent hierarchies that are related to these shared dependencies, with more servers likely to fail together from a higher point in the fault domain tree. During runtime, network controllers enumerate the fault domains in the cluster and attempt to spread out the network controller services so that they are in separate fault domains. This process helps ensure, in case of failure of any one fault domain, that the availability of that service and its state is not compromised. Fault domains are specified in a hierarchical format. For example: /DC1/Rack1/Host1, where DC1 is the datacenter name, Rack1 is the rack name and Host1 is the name of the host where the node is placed.
Aliase |
none |
Erforderlich? |
true |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-Force
Erzwingt die Ausführung des Befehls, ohne den Benutzer zur Bestätigung aufzufordern.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-Name<String>
Specifies the friendly name of the computer to be added to the deployment.
Aliase |
none |
Erforderlich? |
true |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-NodeCertificate<X509Certificate2>
Specifies the certificate used for authenticating the computer. You should only specify this parameter if the cluster is using certificate based authentication.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-PassThru
Gibt ein Objekt an, das das Element darstellt, mit dem Sie arbeiten. Dieses Cmdlet generiert standardmäßig keine Ausgabe.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-RestInterface<String>
Specifies the name of the interface on the node that will receive requests from Representational State Transfer (REST) clients.
Aliase |
none |
Erforderlich? |
true |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-Server<String>
Specifies the fully qualified domain name (FQDN), IP address, or hostname of the computer to be added to the deployment. If Kerberos is being used for cluster authentication, the FQDN must be provided.
Aliase |
none |
Erforderlich? |
true |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-UseSsl
Indicates that the remote machine uses the Secure Sockets Layer (SSL) protocol to establish a connection to the Network Controller node. The default value of this parameter is false. Specify this parameter only if you run this cmdlet on a computer that is not part of the network controller cluster.
Aliase |
none |
Erforderlich? |
false |
Position? |
named |
Standardwert |
none |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-Confirm
Fordert Sie vor der Ausführung des Cmdlet zum Bestätigen auf.
Erforderlich? |
false |
Position? |
named |
Standardwert |
false |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
-WhatIf
Zeit, was passieren würde, wenn das Cmdlet ausgeführt wird. Das Cmdlet wird nicht ausgeführt.
Erforderlich? |
false |
Position? |
named |
Standardwert |
false |
Pipelineeingaben akzeptieren? |
false |
Platzhalterzeichen akzeptieren? |
false |
<CommonParameters>
Dieses Cmdlet unterstützt die allgemeinen Parameter: -Verbose, -Debug, -ErrorAction, -ErrorVariable, -OutBuffer und -OutVariable. Weitere Informationen finden Sie unter about_CommonParameters (https://go.microsoft.com/fwlink/p/?LinkID=113216).
Eingaben
Der Eingabetyp ist der Typ der Objekte, die Sie per Piping an das Cmdlet übergeben können.
Ausgaben
Der Ausgabetyp ist der Typ der Objekte, die vom Cmdlet ausgegeben werden.
- This cmdlet returns an object that contains the following fields:
-- Name of the node
-- Hostname, FQDN, or IP address of the node
-- Fault domain of the node
-- Name of interface to be used for REST operations on the node
-- Node certificate
Beispiele
Example 1: Add network controller to an existing network controller deployment
This command adds a network controller node named Node1 to the existing network controller deployment. The FQDN of the computer is named NCNode1.contoso.com and the interface on the computer listening to REST requests is named Ethernet.
PS C:\> Add-NetworkControllerNode -Name "Node1" -Server "NCNode1.contoso.com" -FaultDomain "fd:/rack1/host1" -RestInterface "Ethernet"