Deploy a VM from a specialized image on your Azure Stack Edge Pro GPU device via Azure PowerShell

Άρθρο
06/28/2023

APPLIES TO: Yes for Pro GPU SKU Azure Stack Edge Pro - GPU Yes for Pro 2 SKU Azure Stack Edge Pro 2 Yes for Pro R SKU Azure Stack Edge Pro R Yes for Mini R SKU Azure Stack Edge Mini R

This article describes the steps required to deploy a virtual machine (VM) on your Azure Stack Edge Pro GPU device from a specialized image.

To prepare a generalized image for deploying VMs in Azure Stack Edge Pro GPU, see Prepare generalized image from Windows VHD or Prepare generalized image from an ISO.

About VM images

A Windows VHD or VHDX can be used to create a specialized image or a generalized image. The following table summarizes key differences between the specialized and the generalized images.

Image type	Generalized	Specialized
Target	Deployed on any system.	Targeted to a specific system.
Setup after boot	Setup required at first boot of the VM.	No setup needed. Platform turns on the VM.
Configuration	Hostname, admin-user, and other VM-specific settings required.	Preconfigured.
Used when	Creating multiple new VMs from the same image.	Migrating a specific machine or restoring a VM from previous backup.

Workflow

The high-level workflow to deploy a VM from a specialized image is:

Copy the VHD to a local storage account on your Azure Stack Edge Pro GPU device.
Create a new managed disk from the VHD.
Create a new virtual machine from the managed disk and attach the managed disk.

Prerequisites

Before you can deploy a VM on your device via PowerShell, make sure that:

You have access to a client that you use to connect to your device.
- Your client runs a Supported OS.
- Your client is configured to connect to the local Azure Resource Manager of your device as per the instructions in Connect to Azure Resource Manager for your device.

Verify the local Azure Resource Manager connection

Verify that your client can connect to the local Azure Resource Manager.

Call local device APIs to authenticate:

Login-AzureRMAccount -EnvironmentName <Environment Name>

Provide the username EdgeArmUser and the password to connect via Azure Resource Manager. If you don't recall the password, Reset the password for Azure Resource Manager and use this password to sign in.

Deploy VM from specialized image

The following sections contain step-by-step instructions to deploy a VM from a specialized image.

Copy VHD to local storage account on device

Follow these steps to copy VHD to local storage account:

Copy the source VHD to a local blob storage account on your Azure Stack Edge.
Take note of the resulting URI. You use this URI in a later step.

To create and access a local storage account, see the sections Create a storage account through Upload a VHD in the article: Deploy VMs on your Azure Stack Edge device via Azure PowerShell.

Create a managed disk from VHD

Follow these steps to create a managed disk from a VHD that you uploaded to the storage account earlier:

Set some parameters.

$VhdURI = <URI of VHD in local storage account>
$DiskRG = <managed disk resource group>
$DiskName = <managed disk name>

Here's an example output.

PS C:\WINDOWS\system32> $VHDURI = "https://myasevmsa.blob.myasegpudev.wdshcsso.com/vhds/WindowsServer2016Datacenter.vhd"
PS C:\WINDOWS\system32> $DiskRG = "myasevm1rg"
PS C:\WINDOWS\system32> $DiskName = "myasemd1"

Create a new managed disk.

$StorageAccountId = (Get-AzureRmStorageAccount -ResourceGroupName $ResourceGroupName -Name $StorageAccountName).Id

$DiskConfig = New-AzureRmDiskConfig -Location DBELocal -StorageAccountId $StorageAccountId -CreateOption Import -SourceUri "Source URL for your VHD"

Here's an example output. The location here is set to the location of the local storage account and is always DBELocal for all local storage accounts on your Azure Stack Edge Pro GPU device.

PS C:\WINDOWS\system32> $DiskConfig = New-AzureRmDiskConfig -Location DBELocal -CreateOption Import -SourceUri $VHDURI
PS C:\WINDOWS\system32> $disk = New-AzureRMDisk -ResourceGroupName $DiskRG -DiskName $DiskName -Disk $DiskConfig
PS C:\WINDOWS\system32>

Create a VM from managed disk

Follow these steps to create a VM from a managed disk:

Set some parameters.

$NicRG = <NIC resource group>
$NicName = <NIC name>
$IPConfigName = <IP config name>
$PrivateIP = <IP address> #Optional

$VMRG = <VM resource group>
$VMName = <VM name>
$VMSize = <VM size>

Note

The PrivateIP parameter is optional. Use this parameter to assign a static IP else the default is a dynamic IP using DHCP.

Here's an example output. In this example, the same resource group is specified for all the VM resources though you can create and specify separate resource groups for the resources if needed.

PS C:\WINDOWS\system32> $NicRG = "myasevm1rg"
PS C:\WINDOWS\system32> $NicName = "myasevmnic1"
PS C:\WINDOWS\system32> $IPConfigName = "myaseipconfig1" 

PS C:\WINDOWS\system32> $VMRG = "myasevm1rg"
PS C:\WINDOWS\system32> $VMName = "myasetestvm1"
PS C:\WINDOWS\system32> $VMSize = "Standard_D1_v2"

Get the virtual network information and create a new network interface.

This sample assumes you're creating a single network interface on the default virtual network ASEVNET that is associated with the default resource group ASERG. If needed, you could specify an alternate virtual network, or create multiple network interfaces. For more information, see Add a network interface to a VM via the Azure portal.

$armVN = Get-AzureRMVirtualNetwork -Name ASEVNET -ResourceGroupName ASERG
$ipConfig = New-AzureRmNetworkInterfaceIpConfig -Name $IPConfigName -SubnetId $armVN.Subnets[0].Id [-PrivateIpAddress $PrivateIP]
$nic = New-AzureRmNetworkInterface -Name $NicName -ResourceGroupName $NicRG -Location DBELocal -IpConfiguration $ipConfig

Here's an example output.

PS C:\WINDOWS\system32> $armVN = Get-AzureRMVirtualNetwork -Name ASEVNET -ResourceGroupName ASERG
PS C:\WINDOWS\system32> $ipConfig = New-AzureRmNetworkInterfaceIpConfig -Name $IPConfigName -SubnetId $armVN.Subnets[0].Id
PS C:\WINDOWS\system32> $nic = New-AzureRmNetworkInterface -Name $NicName -ResourceGroupName $NicRG -Location DBELocal -IpConfiguration $ipConfig
WARNING: The output object type of this cmdlet will be modified in a future release.
PS C:\WINDOWS\system32>

Create a new VM configuration object.

$vmConfig = New-AzureRmVMConfig -VMName $VMName -VMSize $VMSize

Add the network interface to the VM.

$vm = Add-AzureRmVMNetworkInterface -VM $vmConfig -Id $nic.Id

Set the OS disk properties on the VM.
```
$vm = Set-AzureRmVMOSDisk -VM $vm -ManagedDiskId $disk.Id -StorageAccountType StandardLRS -CreateOption Attach –[Windows/Linux]
```
The last flag in this command will be either -Windows or -Linux depending on which OS you're using for your VM.

Create the VM.

New-AzureRmVM -ResourceGroupName $VMRG -Location DBELocal -VM $vm

Here's an example output.

PS C:\WINDOWS\system32> $vmConfig = New-AzureRmVMConfig -VMName $VMName -VMSize $VMSize
PS C:\WINDOWS\system32> $vm = Add-AzureRmVMNetworkInterface -VM $vmConfig -Id $nic.Id
PS C:\WINDOWS\system32> $vm = Set-AzureRmVMOSDisk -VM $vm -ManagedDiskId $disk.Id -StorageAccountType StandardLRS -CreateOption Attach -Windows
PS C:\WINDOWS\system32> New-AzureRmVM -ResourceGroupName $VMRG -Location DBELocal -VM $vm
WARNING: Since the VM is created using premium storage or managed disk, existing standard storage account, myasevmsa, is used for
boot diagnostics.    
RequestId IsSuccessStatusCode StatusCode ReasonPhrase
--------- ------------------- ---------- ------------
                         True         OK OK        
PS C:\WINDOWS\system32>

Delete VM and resources

This article used only one resource group to create all the VM resource. Deleting that resource group deletes the VM and all the associated resources.

First view all the resources created under the resource group.

Get-AzureRmResource -ResourceGroupName <Resource group name>

Here's an example output.

PS C:\WINDOWS\system32> Get-AzureRmResource -ResourceGroupName myasevm1rg


Name              : myasemd1
ResourceGroupName : myasevm1rg
ResourceType      : Microsoft.Compute/disks
Location          : dbelocal
ResourceId        : /subscriptions/992601bc-b03d-4d72-598e-d24eac232122/resourceGroups/myasevm1rg/providers/Microsoft.Compute/disk
                    s/myasemd1

Name              : myasetestvm1
ResourceGroupName : myasevm1rg
ResourceType      : Microsoft.Compute/virtualMachines
Location          : dbelocal
ResourceId        : /subscriptions/992601bc-b03d-4d72-598e-d24eac232122/resourceGroups/myasevm1rg/providers/Microsoft.Compute/virt
                    ualMachines/myasetestvm1

Name              : myasevmnic1
ResourceGroupName : myasevm1rg
ResourceType      : Microsoft.Network/networkInterfaces
Location          : dbelocal
ResourceId        : /subscriptions/992601bc-b03d-4d72-598e-d24eac232122/resourceGroups/myasevm1rg/providers/Microsoft.Network/netw
                    orkInterfaces/myasevmnic1

Name              : myasevmsa
ResourceGroupName : myasevm1rg
ResourceType      : Microsoft.Storage/storageaccounts
Location          : dbelocal
ResourceId        : /subscriptions/992601bc-b03d-4d72-598e-d24eac232122/resourceGroups/myasevm1rg/providers/Microsoft.Storage/stor
                    ageaccounts/myasevmsa

PS C:\WINDOWS\system32>

Delete the resource group and all the associated resources.

Remove-AzureRmResourceGroup -ResourceGroupName <Resource group name>

Here's an example output.

PS C:\WINDOWS\system32> Remove-AzureRmResourceGroup -ResourceGroupName myasevm1rg

Confirm
Are you sure you want to remove resource group 'myasevm1rg'
[Y] Yes  [N] No  [S] Suspend  [?] Help (default is "Y"): Y
True
PS C:\WINDOWS\system32>

Verify that the resource group has deleted. Get all the resource groups that exist on the device.

Get-AzureRmResourceGroup

Here's an example output.

PS C:\WINDOWS\system32> Get-AzureRmResourceGroup

ResourceGroupName : ase-image-resourcegroup
Location          : dbelocal
ProvisioningState : Succeeded
Tags              :
ResourceId        : /subscriptions/992601bc-b03d-4d72-598e-d24eac232122/resourceGroups/ase-image-resourcegroup

ResourceGroupName : ASERG
Location          : dbelocal
ProvisioningState : Succeeded
Tags              :
ResourceId        : /subscriptions/992601bc-b03d-4d72-598e-d24eac232122/resourceGroups/ASERG

ResourceGroupName : myaserg
Location          : dbelocal
ProvisioningState : Succeeded
Tags              :
ResourceId        : /subscriptions/992601bc-b03d-4d72-598e-d24eac232122/resourceGroups/myaserg

PS C:\WINDOWS\system32>

Κοινή χρήση μέσω

Deploy a VM from a specialized image on your Azure Stack Edge Pro GPU device via Azure PowerShell

About VM images

Workflow

Prerequisites

Verify the local Azure Resource Manager connection

Deploy VM from specialized image

Copy VHD to local storage account on device

Create a managed disk from VHD

Create a VM from managed disk

Delete VM and resources

Next steps

Σχόλια

Πρόσθετοι πόροι