Επεξεργασία

Κοινή χρήση μέσω


Quickstart: Create a public load balancer to load balance VMs using the Azure portal

Get started with Azure Load Balancer by using the Azure portal to create a public load balancer for a backend pool with two virtual machines. Other resources include Azure Bastion, NAT Gateway, a virtual network, and the required subnets.

Diagram of resources deployed for a standard load balancer implement.

Prerequisites

Sign in to Azure

Sign in to the Azure portal.

Create NAT gateway

In this section, you create a NAT gateway for outbound internet access for resources in the virtual network. For other options for outbound rules, check out Network Address Translation (SNAT) for outbound connections

  1. Sign in to the Azure portal.

  2. In the search box at the top of the portal, enter NAT gateway. Select NAT gateways in the search results.

  3. Select + Create.

  4. In the Basics tab of Create network address translation (NAT) gateway enter or select the following information:

    Setting Value
    Project details
    Subscription Select your subscription.
    Resource group Select Create new.
    Enter load-balancer-rg in Name.
    Select OK.
    Instance details
    NAT gateway name Enter lb-nat-gateway.
    Region Select East US.
    Availability zone Select No zone.
    Idle timeout (minutes) Enter 15.

    Screenshot of Create network address translation gateway window in the Azure portal.

  5. Select the Outbound IP tab or select the Next: Outbound IP button at the bottom of the page.

  6. Select Create a new public IP address under Public IP addresses.

  7. Enter nat-gw-public-ip in Name in Add a public IP address.

  8. Select OK.

  9. Select the blue Review + create button at the bottom of the page, or select the Review + create tab.

  10. Select Create.

Create a virtual network and bastion host

In this section, you create a virtual network with a resource subnet, an Azure Bastion subnet, and an Azure Bastion host.

Important

Hourly pricing starts from the moment that Bastion is deployed, regardless of outbound data usage. For more information, see Pricing and SKUs. If you're deploying Bastion as part of a tutorial or test, we recommend that you delete this resource after you finish using it.

  1. In the portal, search for and select Virtual networks.

  2. On the Virtual networks page, select + Create.

  3. On the Basics tab of Create virtual network, enter or select the following information:

    Setting Value
    Project details
    Subscription Select your subscription.
    Resource group Select load-balancer-rg from the dropdown or Create new if it doesn't exist.
    Enter load-balancer-rg in Name.
    Select OK.
    Instance details
    Name Enter lb-vnet.
    Region Select (US) East US.

    Screenshot of Basics tab of Create virtual network in the Azure portal.

  4. Select the Security tab or Next button at the bottom of the page.

  5. Under Azure Bastion, enter or select the following information:

    Setting Value
    Azure Bastion
    Enable Azure Bastion Select checkbox.
    Azure Bastion host name Enter lb-bastion.
    Azure Bastion public IP address Select Create new.
    Enter lb-bastion-ip in Name.
    Select OK.
  6. Select the IP addresses tab, or Next at the bottom of the page.

  7. On Create virtual network page, enter or select the following information:

    Setting Value
    Add IPv4 address space
    IPv4 address space Enter 10.0.0.0/16 (65,356 addresses).
    Subnets Select the default subnet link to edit.
    Edit subnet
    Subnet purpose Leave the default Default.
    Name Enter backend-subnet.
    Starting address Enter 10.0.0.0.
    Subnet size Enter /24(256 addresses).
    Security
    NAT Gateway Select lb-nat-gateway.

    Screenshot of default subnet rename and configuration.

  8. Select Save.

  9. Select Review + create at the bottom of the screen, and when validation passes, select Create.

Create load balancer

In this section, you create a zone redundant load balancer that load balances virtual machines. With zone-redundancy, one or more availability zones can fail and the data path survives as long as one zone in the region remains healthy.

During the creation of the load balancer, you configure:

  • Frontend IP address
  • Backend pool
  • Inbound load-balancing rules
  • Health probe
  1. In the search box at the top of the portal, enter Load balancer. Select Load balancers in the search results.

  2. In the Load balancer page, select + Create.

  3. In the Basics tab of the Create load balancer page, enter or select the following information:

    Setting Value
    Project details
    Subscription Select your subscription
    Resource group Select load-balancer-rg
    Instance details
    Name Enter load-balancer
    Region Select East US
    SKU Leave the default Standard
    Type Select Public
    Tier Leave the default Regional

    Screenshot of create standard load balancer basics tab.

  4. Select Next: Frontend IP configuration at the bottom of the page.

  5. In Frontend IP configuration, select + Add a frontend IP configuration.

  6. Enter lb-frontend in Name.

  7. Select IPv4 for the IP version.

  8. Select IP address for the IP type.

    Note

    For more information on IP prefixes, see Azure Public IP address prefix.

  9. Select Create new in Public IP address.

  10. In Add a public IP address, enter lb-frontend-ip for Name.

  11. Select Zone-redundant in Availability zone.

    Note

    In regions with Availability Zones, you have the option to select no-zone (default option), a specific zone, or zone-redundant. The choice will depend on your specific domain failure requirements. In regions without Availability Zones, this field won't appear.
    For more information on availability zones, see Availability zones overview.

  12. Leave the default of Microsoft Network for Routing preference.

  13. Select Save.

  14. Select Save.

  15. Select Next: Backend pools at the bottom of the page.

  16. In the Backend pools tab, select + Add a backend pool.

  17. Enter lb-backend-pool for Name in Add backend pool.

  18. Select lb-vnet in Virtual network.

  19. Select IP Address for Backend Pool Configuration.

  20. Select Save.

  21. Select Next: Inbound rules at the bottom of the page.

  22. Under Load balancing rule in the Inbound rules tab, select + Add a load balancing rule.

  23. In Add load balancing rule, enter or select the following information:

    Setting Value
    Name Enter lb-HTTP-rule
    IP Version Select IPv4 or IPv6 depending on your requirements
    Frontend IP address Select lb-frontend (To be created)
    Backend pool Select lb-backend-pool
    Protocol Select TCP
    Port Enter 80
    Backend port Enter 80
    Health probe Select Create new.
    In Name, enter lb-health-probe.
    Select HTTP in Protocol.
    Leave the rest of the defaults, and select Save.
    Session persistence Select None.
    Idle timeout (minutes) Enter or select 15
    Enable TCP reset Select checkbox
    Enable Floating IP Leave unchecked
    Outbound source network address translation (SNAT) Leave the default of (Recommended) Use outbound rules to provide backend pool members access to the internet.
  24. Select Save.

  25. Select the blue Review + create button at the bottom of the page.

  26. Select Create.

    Note

    In this example we'll create a NAT gateway to provide outbound Internet access. The outbound rules tab in the configuration is bypassed as it's optional and isn't needed with the NAT gateway. For more information on Azure NAT gateway, see What is Azure Virtual Network NAT? For more information about outbound connections in Azure, see Source Network Address Translation (SNAT) for outbound connections

Create virtual machines

In this section, you create two VMs (lb-vm1 and lb-VM2) in two different zones (Zone 1 and Zone 2).

These VMs are added to the backend pool of the load balancer that was created earlier.

  1. In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.

  2. In Virtual machines, select + Create > Azure virtual machine.

  3. In Create a virtual machine, enter or select the following values in the Basics tab:

    Setting Value
    Project Details
    Subscription Select your Azure subscription
    Resource Group Select load-balancer-rg
    Instance details
    Virtual machine name Enter lb-VM1
    Region Select ((US) East US)
    Availability Options Select Availability zones
    Availability zone Select Zone 1
    Security type Select Standard.
    Image Select Windows Server 2022 Datacenter: Azure Edition - Gen2
    Azure Spot instance Leave the default of unchecked.
    Size Choose VM size or take default setting
    Administrator account
    Username Enter a username
    Password Enter a password
    Confirm password Reenter password
    Inbound port rules
    Public inbound ports Select None
  4. Select the Networking tab, or select Next: Disks, then Next: Networking.

  5. In the Networking tab, select or enter the following information:

    Setting Value
    Network interface
    Virtual network Select lb-vnet
    Subnet Select backend-subnet
    Public IP Select None.
    NIC network security group Select Advanced
    Configure network security group Skip this setting until the rest of the settings are completed. Complete after Select a backend pool.
    Delete NIC when VM is deleted Leave the default of unselected.
    Accelerated networking Leave the default of selected.
    Load balancing
    Load balancing options
    Load-balancing options Select Azure load balancer
    Select a load balancer Select load-balancer
    Select a backend pool Select lb-backend-pool
    Configure network security group Select Create new.
    In the Create network security group, enter lb-NSG in Name.
    Under Inbound rules, select +Add an inbound rule.
    In Service, select HTTP.
    Under Priority, enter 100.
    In Name, enter lb-NSG-Rule
    Select Add
    Select OK
  6. Select Review + create.

  7. Review the settings, and then select Create.

  8. Follow the steps 1 through 7 to create another VM with the following values and all the other settings the same as lb-VM1:

    Setting VM 2
    Name lb-VM2
    Availability zone Zone 2
    Network security group Select the existing lb-NSG

Note

Azure provides a default outbound access IP for VMs that either aren't assigned a public IP address or are in the backend pool of an internal basic Azure load balancer. The default outbound access IP mechanism provides an outbound IP address that isn't configurable.

The default outbound access IP is disabled when one of the following events happens:

  • A public IP address is assigned to the VM.
  • The VM is placed in the backend pool of a standard load balancer, with or without outbound rules.
  • An Azure NAT Gateway resource is assigned to the subnet of the VM.

VMs that you create by using virtual machine scale sets in flexible orchestration mode don't have default outbound access.

For more information about outbound connections in Azure, see Default outbound access in Azure and Use Source Network Address Translation (SNAT) for outbound connections.

Install IIS

  1. In the search box at the top of the portal, enter Virtual machine. Select Virtual machines in the search results.

  2. Select lb-VM1.

  3. On the Overview page, select Connect, then Bastion.

  4. Enter the username and password entered during VM creation.

  5. Select Connect.

  6. On the server desktop, navigate to Start > Windows PowerShell > Windows PowerShell.

  7. In the PowerShell Window, run the following commands to:

    • Install the IIS server.
    • Remove the default iisstart.htm file.
    • Add a new iisstart.htm file that displays the name of the VM:
     # Install IIS server role
     Install-WindowsFeature -name Web-Server -IncludeManagementTools
    
     # Remove default htm file
     Remove-Item  C:\inetpub\wwwroot\iisstart.htm
    
     # Add a new htm file that displays server name
     Add-Content -Path "C:\inetpub\wwwroot\iisstart.htm" -Value $("Hello World from " + $env:computername)
    
    
  8. Close the Bastion session with lb-VM1.

  9. Repeat steps 1 to 8 to install IIS and the updated iisstart.htm file on lb-VM2.

Test the load balancer

  1. In the search box at the top of the page, enter Public IP. Select Public IP addresses in the search results.

  2. In Public IP addresses, select frontend-ip.

  3. Copy the item in IP address. Paste the public IP into the address bar of your browser. The custom VM page of the IIS Web server is displayed in the browser.

    Screenshot of load balancer test

Clean up resources

When no longer needed, delete the resource group, load balancer, and all related resources. To do so, select the resource group load-balancer-rg that contains the resources and then select Delete.

Next steps

In this quickstart, you:

  • Created an Azure Load Balancer
  • Attached 2 VMs to the load balancer
  • Tested the load balancer

To learn more about Azure Load Balancer, continue to: