Επεξεργασία

Κοινή χρήση μέσω

Configure column encryption using Always Encrypted with PowerShell

  • Άρθρο

Applies to: SQL Server Azure SQL Database Azure SQL Managed Instance

This article provides the steps for setting the target Always Encrypted configuration for database columns using the Set-SqlColumnEncryption cmdlet (in the SqlServer PowerShell module). The Set-SqlColumnEncryption cmdlet modifies both the schema of the target database as well as the data stored in the selected columns. The data stored in a column can be encrypted, re-encrypted, or decrypted, depending on the specified target encryption settings for the columns and the current encryption configuration.

Note

If you are using SQL Server 2019 (15.x) and your SQL Server instance is configured with a secure enclave, you can run cryptographic operations in-place, without moving data out of the database. See Configure column encryption in-place using Always Encrypted with secure enclaves. Note that the PowerShell does not support in-place encryption.

For more information about Always Encrypted support in the SqlServer PowerShell module, see Configure Always Encrypted using PowerShell.

Prerequisites

To set the target encryption configuration, you need to make sure:

  • a column encryption key is configured in the database (if you're encrypting or re-encrypting a column). For details, see Configure Always Encrypted keys using PowerShell.
  • you can access the column master key for each column you want to encrypt, re-encrypt, or decrypt, from the computer running the PowerShell cmdlets.
  • you use SqlServer PowerShell module version 22.0.50 or later.

Performance and Availability Considerations

To apply the specified target encryption settings for the database, the Set-SqlColumnEncryption cmdlet transparently downloads all data from the columns containing the target tables, uploads the data back to a set of temporary table (with the target encrypted settings), and finally replaces the original tables with the new versions of the tables. The underlying .NET Framework Data Provider for SQL Server encrypts or/and decrypts data on download or/and upload, depending on the current encryption configuration of the target column is and the specified target encryption settings for the target columns. The operation to move the data may take a long time, depending on the size of the data in impacted tables and the network bandwidth.

The Set-SqlColumnEncryption cmdlet supports two approaches for setting up the target encryption configuration: online and offline.

With the offline approach, the target tables (and any tables related to the target tables, for example, any tables a target table have foreign key relationships with) are unavailable to write transactions throughout the duration of the operation. The semantics of foreign key constraints (CHECK or NOCHECK) are always preserved when using the offline approach.

With the online approach (requires the SqlServer PowerShell module version 21.x or later), the operation of copying and encrypting, decrypting, or re-encrypting the data is performed incrementally. Applications can read and write data from and to the target tables throughout the data movement operation, except the last iteration, the duration of which is limited by the MaxDownTimeInSeconds parameter (which you can define). To detect and process the changes applications can make while the data is being copied, the cmdlet enables Change Tracking in the target database. Because of that, the online approach is likely to consume more resources on the server side than the offline approach. The operation may also take much more time with the online approach, especially if a write-heavy workload is running against the database. The online approach can be used to encrypt one table at a time and the table must have a primary key. By default, foreign key constraints are recreated with the NOCHECK option to minimize the impact on applications. You can enforce preserving the semantics of foreign key constraints by specifying the KeepCheckForeignKeyConstraints option.

Here are the guidelines for choosing between the offline and online approaches:

Use the offline approach:

  • To minimize the duration of the operation.
  • To encrypt/decrypt/re-encrypt columns in multiple tables at the same time.
  • If the target table doesn't have a primary key.

Use the online approach:

  • To minimize the downtime/unavailability of the database to your applications.

Security Considerations

The Set-SqlColumnEncryption cmdlet, used to configure encryption for database columns, handles both Always Encrypted keys and the data stored in database columns. Therefore, it's important you run the cmdlet on a secure computer. If your database is in SQL Server, execute the cmdlet from a different computer than the computer hosting your SQL Server instance. Because the primary goal of Always Encrypted is to ensure encrypted sensitive data is safe even if the database system gets compromised, executing a PowerShell script that processes keys and/or sensitive data on the SQL Server computer can reduce or defeat the benefits of the feature.

Task Article Accesses plaintext keys/key store Accesses database
Step 1. Start a PowerShell environment and import the SqlServer module. Import the SqlServer module No No
Step 2. Connect to your server and database Connecting to a database No Yes
Step 3. Authenticate to Azure, if your column master key (protecting the column encryption key, to be rotated), is stored in Azure Key Vault Connect-AzAccount Yes No
Step 4. Obtain an access token for Azure Key Vaults, if your column master key is stored in Azure Key Vault. Get-AzAccessToken No No
Step 5. Construct an array of SqlColumnEncryptionSettings objects - one for each database column, you want to encrypt, re-encrypt, or decrypt. SqlColumnMasterKeySettings is an object that exists in memory (in PowerShell). It specifies the target encryption scheme for a column. New-SqlColumnEncryptionSettings No No
Step 6. Set the desired encryption configuration, specified in the array of SqlColumnMasterKeySettings objects, you created in the previous step. A column will be encrypted, re-encrypted, or decrypted, depending on the specified target settings and the current encryption configuration of the column. Set-SqlColumnEncryption

Note: This step may take a long time. Your applications won't be able to access the tables through the entire operation or a portion of it, depending on the approach (online vs. offline), you select.		 Yes Yes

Encrypt Columns using Offline Approach - Example

The below example demonstrates setting the target encryption configuration for a couple of columns. If either column isn't already encrypted, it will be encrypted. If any column is already encrypted using a different key and/or a different encryption type, it will be decrypted and then re-encrypted with the specified target key/type.

# Import the SqlServer module.
Import-Module "SqlServer" -MinimumVersion 22.0.50
Import-Module Az.Accounts -MinimumVersion 2.2.0

#Connect to Azure
Connect-AzAccount

# Obtain an access token for key vaults.
$keyVaultAccessToken = (Get-AzAccessToken -ResourceUrl https://vault.azure.net).Token  

# Connect to your database.
$serverName = "<server name>"
$databaseName = "<database name>"
# Change the authentication method in the connection string, if needed.
$connStr = "Server = " + $serverName + "; Database = " + $databaseName + "; Integrated Security = True"
$database = Get-SqlDatabase -ConnectionString $connStr

# Encrypt the selected columns (or re-encrypt, if they are already encrypted using keys/encrypt types, different than the specified keys/types.
$ces = @()
$ces += New-SqlColumnEncryptionSettings -ColumnName "dbo.Patients.SSN" -EncryptionType "Deterministic" -EncryptionKey "CEK1"
$ces += New-SqlColumnEncryptionSettings -ColumnName "dbo.Patients.BirthDate" -EncryptionType "Randomized" -EncryptionKey "CEK1"
Set-SqlColumnEncryption -InputObject $database -ColumnEncryptionSettings $ces -LogFileDirectory . -KeyVaultAccessToken $keyVaultAccessToken

Encrypt Columns using Online Approach - Example

The below example demonstrates setting the target encryption configuration for a couple of columns using the online approach. If either column isn't already encrypted, it will be encrypted. If any column is already encrypted using a different key and/or a different encryption type, it will be decrypted and then re-encrypted with the specified target key/type.

# Import the SqlServer module.
Import-Module "SqlServer" -MinimumVersion 22.0.50
Import-Module Az.Accounts -MinimumVersion 2.2.0

#Connect to Azure
Connect-AzAccount

# Obtain an access token for key vaults.
$keyVaultAccessToken = (Get-AzAccessToken -ResourceUrl https://vault.azure.net).Token  

# Connect to your database.
$serverName = "<server name>"
$databaseName = "<database name>"
# Change the authentication method in the connection string, if needed.
$connStr = "Server = " + $serverName + "; Database = " + $databaseName + "; Integrated Security = True"
$database = Get-SqlDatabase -ConnectionString $connStr

# Encrypt the selected columns (or re-encrypt, if they are already encrypted using keys/encrypt types, different than the specified keys/types.
$ces = @()
$ces += New-SqlColumnEncryptionSettings -ColumnName "dbo.Patients.SSN" -EncryptionType "Deterministic" -EncryptionKey "CEK1"
$ces += New-SqlColumnEncryptionSettings -ColumnName "dbo.Patients.BirthDate" -EncryptionType "Randomized" -EncryptionKey "CEK1"
Set-SqlColumnEncryption -InputObject $database -ColumnEncryptionSettings $ces -UseOnlineApproach -MaxDowntimeInSeconds 180 -LogFileDirectory . -KeyVaultAccessToken $keyVaultAccessToken

Decrypt Columns - Example

The following example shows how to decrypt all columns that are currently encrypted in a database.

# Import the SqlServer module.
Import-Module "SqlServer" -MinimumVersion 22.0.50
Import-Module Az.Accounts -MinimumVersion 2.2.0

#Connect to Azure
Connect-AzAccount

# Obtain an access token for key vaults.
$keyVaultAccessToken = (Get-AzAccessToken -ResourceUrl https://vault.azure.net).Token  

# Connect to your database.
$serverName = "<server name>"
$databaseName = "<database name>"
# Change the authentication method in the connection string, if needed.
$connStr = "Server = " + $serverName + "; Database = " + $databaseName + "; Integrated Security = True"
$database = Get-SqlDatabase -ConnectionString $connStr

# Find all encrypted columns, and create a SqlColumnEncryptionSetting object for each column.
$ces = @()
$tables = $database.Tables
for($i=0; $i -lt $tables.Count; $i++){
    $columns = $tables[$i].Columns
    for($j=0; $j -lt $columns.Count; $j++) {
        if($columns[$j].isEncrypted) {
            $threeColPartName = $tables[$i].Schema + "." + $tables[$i].Name + "." + $columns[$j].Name 
            $ces += New-SqlColumnEncryptionSettings -ColumnName $threeColPartName -EncryptionType "Plaintext" 
        }
    }
}

# Decrypt all columns.
Set-SqlColumnEncryption -ColumnEncryptionSettings $ces -InputObject $database -LogFileDirectory . -KeyVaultAccessToken $keyVaultAccessToken

Next Steps

See Also