Επεξεργασία

Κοινή χρήση μέσω


IRP_MJ_WRITE

Every device driver that transfers data from the system to its device must handle write requests in a DispatchWrite or DispatchReadWrite routine, as must any higher-level driver layered over such a device driver.

When Sent

Any time following the successful completion of a create request.

Possibly, a user-mode application or Win32 component with a handle for the file object representing the target device object has requested a data transfer to the device. Possibly, a higher-level driver has created and set up the write IRP.

Input Parameters

The driver's I/O stack location in the IRP indicates how many bytes to transfer at Parameters.Write.Length.

Some drivers use the value at Parameters.Write.Key to sort incoming write requests into a driver-determined order in the device queue or in a driver-managed internal queue of IRPs.

Certain types of drivers also use the value at Parameters.Write.ByteOffset, which indicates the starting offset for the transfer operation. For example, see the IRP_MJ_WRITE topic in the Installable File System (IFS) documentation.

Depending on whether the underlying device driver sets up the target device object's Flags with DO_BUFFERED_IO or with DO_DIRECT_IO, data is transferred from one of the following:

  • The buffer at Irp->AssociatedIrp.SystemBuffer, if the driver uses buffered I/O

  • The buffer described by the MDL at Irp->MdlAddress, if the underlying device driver uses direct I/O (DMA or PIO)

Output Parameters

None

Operation

On receipt of a write request, a higher-level driver sets up the I/O stack location in the IRP for the next-lower driver, or it creates and sets up additional IRPs for one or more lower drivers. It can set up its IoCompletion routine, which is optional for the input IRP but required for driver-created IRPs, by calling IoSetCompletionRoutine. Then, the driver passes the request on to the next-lower driver with IoCallDriver.

On receipt of a write request, a device driver transfers data from system memory to its device. The device driver sets the Information field of the I/O status block to the number of bytes transferred when it completes the IRP.

Requirements

Header

Wdm.h (include Wdm.h, Ntddk.h, or Ntifs.h)

See also

DispatchReadWrite

DispatchWrite

IoCallDriver

IoCompletion

IoSetCompletionRoutine